Used Juice for sale (244)

Condition: used, water tank capacity: 40,000 l, V2A stainless steel tank, upright, wine tank/fruit juice tank, Rieger - used - Volume approx. 40,000 liters Diameter approx. 2,800 mm cyl. Height approx. 5,800 mm Total height approx. 7,400 mm Weight approx. 1,000 kg Outer surface: marbled Inner surface: 2B=IIIC ground Top end: Torispherical head 2 crane eyes Central threaded weld-on connection DN 100 to DN 40 with threaded connection DN 50 with vent valve DN 50 and check valve DN 50 Sprinkling ring Tank cylinder: Level indicator with bar, scale, and standpipe valve DN 15 Manhole 420x320 mm Test tap DN 15 1 ladder hook at the top Immersion stem sleeve for temperature display Downwardly extending CIP line with vent line DN 40 with connecting thread DN 50 Clear drain with angled seat valve DN 50 Cooling line CIP ball Underbody: Torispherical bottom Floor-mounted bottom bead with DN 50 angled-seat valve, flush with tank wall Floor-mounted outlet with butterfly valve/ball valve/angled-seat valve, DN 50 outlet pipe with flange Five spherical feet, height-adjustable, with washers Otherwise, as per photos Dcsdpfx Aswlg Dasdasb

Condition: excellent (used), Year of construction: 2001, - Capacity effective 40-70t/h - With frequency converter Dcodpfowifhrex Adaeb - With large crushing rollers - With pre-juice separation valve - Operating principle: JUICING – DESTEMMING – CRUSHING - Modes of operation: Only crushing, destemming-crushing, destemming without crushing! - With automatic air blow-out system for continuous cleaning of the destemming drum, for machine harvesting - Electric/pneumatic control cabinet, original Armbruster - Possibility of remote control with the control panel in the grape receiving office - With 1 spare destemming drum - Machine in very good condition!

Year of construction: 1999, condition: ready for operation (used), A complete bottle filling line for cold and hot products is available. Bottle types: 0.25l/0.33l/0.5l vegetable/0.75l Bordeaux/0.75l fruit oasis/1l VdF/1l PET hotfill. Closure types: 28er Alu-Anroll/33er TWO/43er TWO/PET closure. Products: Cold fill CO2/pressurized hot fill below 100°C/pressurized hot fill above 100°C. Carton outer packaging: tray/wrap-around, total line output: approx. 27000 bottles/h. 1) Bottle washer Niko 36.25.750.100, year of manufacture: 1999, control: Siemens S7, spare parts package: available. 2) Bottle filling machine KHS Innofill DNR80, year of manufacture: 1999, control system: Siemens S7 with HMI renewed in 2015, filling stations: 80, filling temperature range: 10°C-104°C, products: Soft drinks/mineral water/fruit juices, spare parts package: available. 3) Screw capper (connected to the KHS) Alcoa 15 VK, year of manufacture: 1999, cap types: 28 mm aluminum and 43 mm plastic caps, sorting units: 2, replacement spindles: available, spare parts package: available. 4) TWO capper Italmeccania/Crown S4BLH, year of manufacture: approx. 1993, control: Siemens S7, capper type: belt capper, spare parts package: available. Including suction unit and sorting unit for TWO sheet metal closures. 5) Tunnel pasteurizer/recooler Göbel Tuchenhagen K1-35-175, year of construction: approx. 1993, control: contactor control, heating zones: 3, cooling zones: 2, fresh water zones: 1, belt width: 3500mm, length: approx. 16000mm. 6) Drying tunnel Europool TF03, year of construction: 2007, control system: Siemens S7, blower: 3. 7) Krones Starmatic high-speed labeling machine, year of manufacture: 1991, control system: Siemens S5, spare parts package: available. 8) Sleever Krones, year of manufacture: 2007, control system: Siemens S7, sleeve dimensions X/Y: 139mm/149mm, sleeve magazine: available, spare parts package: available. 9) Wrap-around packaging machine Kisters 320/50, year of manufacture: 1999, control: Rexroth Indramat, packaging capacity: 50 cycles/min, packaging type: tray/wrap-around, spare parts package: available. Including a Nordson Problue 14 gluing unit and automatic glue conveyor. 10) Shrink tunnel Krones Schrinkmat 5000, year of construction: 2007, heating zones: 10, spare parts package: available. Including suction unit. 11) Indspect fill level label inspection machine, inspection method: Inclined seat inspection/fill tube detection/lid detection/fill level inspection/vacuum inspection and label inspection. 12) KHS Lord 1BSN2 palletizing system, year of manufacture: 1999, control system: Siemens S7, pallet formats: Düsseldorfer pallet/Euro pallet/industrial pallet, pre-grouping station: available. 13) 2-sided label printer Logopak 920 II PF, year of manufacture: 2004, label dimensions X/Y: 148mm/210mm. 14) Various conveyor belts for product transport between the above-mentioned machines. Documentation available. On-site inspection is possible. Dcedpjwxfagsfx Adajb

Condition: like new (used), Year of construction: 2014, operating hours: 1,100 h, functionality: fully functional, year of last overhaul: 2025, Equipment: documentation/manual, Professional labeling monoblock GAI 84003 for medium and large food companies – wineries, breweries, syrup and juice producers, and others; the machine labels bottles of all shapes and sizes with accuracy, speed, and reliability! The labeling machine is equipped with a GAI 8400E monoblock for dispensing, a valve with a thermal head, and a filling head. Output capacity: 3,000 – 10,000 bottles/hour. Capable of applying front labels, back labels, wrap-around tape, QR codes, batch numbers, and medals. The machine is minimally used, regularly serviced by UNIMARKO, and ready for immediate operation after servicing. Complete technical documentation and service history available; touchscreen controls; training provided. Machines can also be sold separately. Year of manufacture: 2014. Price negotiable. Dodpfoxt U Elox Adaocb

Condition: ready for operation (used), COMPLETE KRONES PET BOTTLES ASEPTIC FILLING LINE FOR FRUIT JUICE/BEVERAGES AND SPRITZERS. SUITABLE FOR STILL AND CARBONATED PRODUCTS. YOM 2002-2007 CAPACITY: 0,5L x 36.000 BPH 1,0L x 30.240 BPH 1,5L x 25.200 BPH BOTTLE CLOSURES 28mm. THE LINE INCLUDES BOTTLE BLOWING, FILLING, LABELING, PACKAGING AND PALLETIZING: 1. Control unit: Ruland 2002, touchscreen, flash heating & CIP/SIP 2. Pasteur: Ruland 2002, tube heat exchanger, 1315 L supply tank, max. 21,800 L/h 3. Sterile tank: Roth 2002, 11,000 L 4. Carbonization: Roth/Ruland 2002, 2575 L, disconnected 5. Nitrogen system: Terboven/ISTE 2002 6. Hygienic center: Ecolab/Lang 2002, CAF, no PLC 7. Sterile water system: Roth/Ruland 2002, 9,000 L/h, buffer 2575 L 8. Sterile water system: Roth/Ruland 2002, 9,000 L/h, buffer 2575 L 9. CIP/SIP: Ruland 2002, 20,000 L/h, 1315 L supply tank 10. Cleanroom: Weiss 2002, ventilation/overpressure 11. Preform hopper: Dieterle 2002, MD3 12. Preform feeding: Tanner 2002, HFT 4730 / RGT 1624 13. Blow molding: Krones Contiform S16 2002, 16 stations, 1.0–20,000 b/h 14. Air conveyor: Krones 2002, automatic rail adjustment 15. Cap conveyor: Gassner 2002, 2 container positions, cap elevator 16–18. Filling machine: Krones CAF VODM 100 2002, injector (60), rinser (80), filler (100), capper (20), 1,0–20.000 b/h, 28 mm caps, still/carbonated 19. Label check: Krones 2002, incl. in Prontomodul 20. Bottle check: Krones 2002 21. Conveyor: Krones 2002, air blower before labeling 22. Labeling machine: Krones Prontomodul 2007, max. 35.600 b/h 23. Canmatic module: Krones 2007, paper labels 24. Contriroll module: Krones 2007, film roll 25. MHD coding: Videojet Excel/170i 26. Shrink wrapper: Krones Variopak 2002, 0.5–36,000 b/h, carton feeder & film transport 27. Packaging conveyor: Krones 2002 28. Handle applicator: Twinpack MHTE 2002 29. Empty pallet magazine: Krones LPM 2002 30. Palletizing: Krones robot 3A loader 2002, 4,000 packages/h 31. Pallet conveyor: Krones 2002, transfer cart & turner Dedpfoxm Rwqsx Adaocb 32. Empty pallet magazine: Krones LPM 2002 33/34. Pallet stretch wrappers: Franpak 2002, top sheet applicator 35. Tying machine: Bornbinder HB 2002 36. Pallet coding: Logopak EAN 128 2003 THE LINE IS STILL NOT DISMANTLING, EXCELLENT CONDITION. LOCATION - GERMANY.

Year of construction: 2023, operating hours: 129 h, condition: refurbished (used), functionality: fully functional, machine/vehicle number: 00780, For Sale: Vibrating Fine Filter Unit (SIVE Fluid Systems) General Description Offered for sale is a SIVE Fluid Systems fine filter unit (vibration screen / vibration filter), suitable for filtering solids from liquids, as well as dairy components during cheese pressing. The machine was built in 2023 and features the latest technology. It is particularly suitable for the food and beverage industry, plant-based protein production, and other processes where precise solid-liquid separation is required. Technical Data Model / Type: Filtro Finos Aut-ULCIP AISI-304 Serial Number: 00780 Project No.: P23.108 R3 Capacity: 2,000 kg/h Filter elements: 100 µm and 200 µm Material: Stainless steel AISI-304 Electrical connection: Djdpfx Adew R E E Soaocb 3x400 V + N + PE 50 Hz 4.4 kW Year of manufacture: 2023 Condition: As new / hardly used Special features Integrated automatic CIP system Hygienic design for food applications Robust stainless steel construction (AISI-304) High throughput capacity (up to 2,000 kg/h) Flexible screen options (100 and 200 µm or others) CE certified Fields of application Food industry (dairy alternatives, beverages, fruit juices, plant-based proteins) Chemical & pharmaceutical industry Water treatment Industrial liquid-solid separation Location: Switzerland Price: On request Contact: If interested or for further technical details, please contact directly:

Condition: used, water tank capacity: 60,200 l, Upright stainless steel container made of V2A, wine tank/fruit juice tank - used - Manufacturer: Bolz Volume approx. 60,200 liters Diameter approx. 3,500 mm cyl. Height approx. 5,330 mm Total height approx. 7,700 mm Weight approx. 3,500 kg Outer surface: marbled Inner surface: 2B=IIIC ground Top end: Torispherical head 2 crane eyes Threaded weld-on socket DN 100 to DN 40 Sprinkling ring Vent socket DN 50 (fermentation lock) Tank cylinder: Level indicator with bar, scale, and standpipe valve DN 15 Manhole 350x450 mm Test tap DN 15 Ladder hook at the top Immersion stem sleeve DN 15 for temperature display Downwardly extending CIP line with vent line DN 40, with connecting thread DN 50 according to DIN 11851 Clear drain with angled seat valve DN 50 Cooling line CIP ball Underbody: Torispherical head Forward curved bead with angled seat valve DN 50 - Outlet pipe DN 100 reduced to DN 50 with flange 5 trumpet feet with domes, height-adjustable with washers Dcodpfx Ajwlg Apsdaob Available quantity: 30 pcs. Otherwise, see photos

Condition: excellent (used), Year of construction: 2004, - Effective performance 30-70 tons/hour - With frequency converter - With large roller crushers - With pre-pressing bypass - Working principle: JUICING – DESTEMMING – CRUSHING - Working possibilities: Only crushing, destemming and crushing, destemming without crushing! - With automatic air-blow system for continuous cleaning of the destemming cylinder during machine harvesting - Electric/pneumatic control cabinet, original Armbruster Dsdpfx Adewiffkeaecb - Possibility of remote control with control panel at grape reception office - Machine in very good condition!

Condition: ready for operation (used), A concentrate system for thickening and concentrating liquids, typically in the production of juices, concentrates or other liquids in the food industry, is available. Evaporator: horizontal, evaporator stages: 4, operating mode: live steam, heat exchange: preheating/recovery/cooling, condensation: semi-barometric milk condensation, flavor extraction: rectification/floor column. Water evaporation: 4840kg/h, inlet quantity: 6600kg/h, inlet dry matter: 12%, outlet quantity: 1760kg/h, final dry matter: 45%, aroma recovery at 150-fold concentration: 42l/h, steam consumption: 1685kg/h, specific steam consumption: 348g/kg, fresh water consumption: approx. 12700l/h. Documentation available. On-site inspection is possible. Dcjdpov Sugqefx Adaeb

Condition: used, Year of construction: 1991, consisting of: -SIGMATHERM plate heat exchanger (heat exchange surface 21.5 m2) - Forerun tank 1200 l - Hilge product pump with manual control valve - Hilge hot water circulation pump - 500 l expansion tank - Shell-and-tube heat exchanger - Compressed air reduction station -Control cabinet with operating panel Additional title: juice heating plant for pasteurization Dcsdpfjvcqy Uex Adajb Capacity: 100 hl/h Perm. working overpressure: 16 bar test pressure 20,8 bar Wärmeaustauschfläche: 21 m2 Length: 5,6 m Width: 2 m Height: 2,4 m Operation / Control: Control cabinet with operating buttons Material: Stainless steel Base construction: Frame Features: 2 x vessels; plate heat exchanger; pipe heat exchanger; 2 x product pumps; process measuring and control technology. various valves and other fittings

Condition: used, Year of construction: 1995, operating hours: 5,132 h, Press system with ACP 1500 and APEX 1600, capacity: approx. 14 t/h Continuous operation with integrated pomace re-extraction for increased yield Dedpjw Hxrljfx Adaocb Compac press type: ACP 1500, belt width 1,500 mm, press length approx. 4,515 mm, width: 2,440 mm and height approx. 2,180 mm, Press belt / sieve belt Mash feed hopper, juice collection trays Pneumatic cylinder for belt tensioning, pneumatic control, piping Belt cleaning by rotating brush roller and belt scraper blade; Mash pump type: AMP 580, compact design eccentric screw pump Press system with APEX 1600 For the production of fruit juices with exceptionally high yields using integrated pomace re-extraction system Footprint: 3,500 mm x 2,500 mm, including:

Year of construction: 2024, condition: new, The pasteurizer is suitable for heat treating liquid, low-viscosity food products. The device is designed in accordance with food hygiene requirements. The heat treatment is carried out via a heat exchanger equipped with a stainless steel tube coil. The thermal energy is provided by a heating oil boiler. The temperature of the heating water is regulated by the boiler control. The temperature control of the treated liquid is achieved by a controlled switching valve. Temperature is monitored at two points: once in the heating medium and once at the product outlet. The device regulates the temperature of the heating medium automatically. Operation is fully automated. If the temperature of the juice to be pasteurized falls below the desired temperature, the output of the device is blocked and the juice circulates in the bypass system until the temperature reaches the set level. After that, the device allows filling again. After work is finished, the tube coil can be cleaned very easily using a sponge ball system. The device requires only minimal maintenance. ⚙️ Technical Information Capacity: 400 L/hour (when heating from 20°C to 80°C) Power requirement: 1 kW, 230 V, 6 A Boiler output: 35 kW Fuel: Diesel or gas Material: AISI 304 stainless steel Dimensions: Length: 1820 mm Width: 620 mm Height: 915 mm Dcedpfxov Srw Tj Adaob Protection class: IP65 Connections: DN 25 Exhaust pipe: 110 mm diameter Automatic temperature control Automatic bypass system Easy cleaning with sponge balls Low maintenance Options: Manual bag-in-box filling device Semi-automatic bag-in-box filling device 3-head bottle filling module Accessories: Sponge balls for cleaning

Condition: refurbished (used), Year of construction: 1973, functionality: fully functional, rotational speed (min.): 4,800 rpm, Separator WESTFALIA type SB60-06-076 for beer, fruit juices, wine, vegetable juices, tea, coffee, for citrus and tropical fruits for pectin Dcodpotqf Dbefx Adaob capacity: 300-13.000l per hour with 4,800 rpm Dimensions and weight: Height: 2500 mm Length: 2000 mm Width: 1800 mm Weight: 2350 kg Technical Data: Manufacturer: Westfalia Type: SB60-06-076 Year of construction: 1973 Serial number: 1668 021 Ø dl. 568 mm Drum speed: 4800 rpm Permissible density of the centrifuged material: Heavy liquid: 1.0 kg/ dm3 Solids: 1.45 kg/ dm Test books, tools, drawings available!

Condition: excellent (used), Year of construction: 2004, - Tank press - Diaphragm : 2021 - With integrated compressor - Large surface juice drainage channels, circular / self-cleaning Djdpfx Ajuyiupedaocb - With central filling - Probe in the juice tank for pump control - On base frame - Machine in very good condition

Condition: like new (used), functionality: fully functional, The static autoclave bases its sterilization system on the heat and cold transmission system by means of a water cascade. This autoclave is suitable for products that do not require movement during the sterilization process. The water, by means of a pump, is passed through a stainless steel plate exchanger for indirect heating. The heating and cooling of the water, which we use in all the cycles of the process, is carried out in the plate heat exchanger by means of steam or cold water. PRODUCTS: CANNED VEGETABLES, PASTA, PRE-COOKED FOODS, JUICES AND BEVERAGES, MEAT PRODUCTS, PATES, CANNED FRUIT, FISH. Features: Diameter: 1380mm. Basket: 1X0.99X0.93m. Heat exchanger. Automated loading and unloading. Dcsdpfx Adown Hgtjaob Operation by waterfall system. Control panel. Valves.

Year of construction: 2024, condition: new, The pasteurization system is fully automated with an industrial control system and touchscreen operation. If the temperature of the juices to be pasteurized drops below the desired temperature, the outlet side of the machine is shut down, and the juice is directed through the bypass until the desired temperature is reached again. Filling can then resume. At the end of the cycle, the spiral pipe can be easily cleaned with a sponge ball. Our system is low-maintenance. Dsdpfx Adsv Srl Rjajcb ⚙️ Technical Information Rated capacity: 400 L/h Power requirement: 27 kW, 400 V, 40 A Material: Wnr. 1.4301, AISI 304 stainless steel Water buffer: 80 L Dimensions: Length: 760 mm Width: 714 mm Height: 1637 mm Weight: 170 kg Optional with filling equipment

Condition: excellent (used), Year of construction: 1996, functionality: fully functional, - Open press basket, capacity 12 hl - Year of manufacture: 1996 - New elastic central diaphragm - Integrated compressor - Large circular/self-cleaning drainage area. Dcsdpfx Adew In Nbjaob - With central feeder - Juice tray on wheels - Press with wheels - Machine overhauled

Condition: like new (used), The Alfa Laval TAF-2HM aseptic filler is an automatic machine engineered for the aseptic filling of food and beverage products in bag-in-drum packaging of up to 200 litres. This unit is particularly suitable for both liquid and highly viscous products, including low-acidity goods and those containing particulates. Main features: - Filling capacity: Supports bag-in-drum formats up to 200 litres. - Head configuration: 2-head model, enabling simultaneous filling to boost throughput. - Product compatibility: Suitable for low-acid foods and beverages, liquids, viscous products, and products with particulates. - Modularity and versatility: The modular construction allows adaptation to different bag sizes, cap types, and container designs, delivering production flexibility. - Automated filling process: The filling cycle—including bag opening, filling, and sealing—is triggered automatically after manual insertion of the bag neck into the filling station. Throughout the cycle, steam jet and filling valve temperatures are continuously monitored and regulated. - Regulatory compliance: Adheres to aseptic validation protocols and ensures commercial sterility of the finished product. - Easy operation and cleaning: The system features user-friendly controls and convenient cleaning options, including sterilisation-in-place (SIP) and cleaning-in-place (CIP), reducing contamination risks and enhancing operational efficiency. Applications: The TAF-2HM is ideally suited for the food and beverage sector, particularly for products such as juices, purees, sauces, condiments, syrups, and premixed drinks. Its capability to handle viscous and particulate-rich products makes it compatible with a broad spectrum of industrial processing needs. Dcsdpjxp Rdiofx Adaeb Note: Actual output depends on product type and packaging format. Roller conveyor specifications: - 2 belts: 1.52 m x 1.55 m - 2 belts: 1.47 m x 1.55 m - Usable roller width: 1.20 m - 4 motors: 0.86 kW / 1.2 hp each.

Year of construction: 2025, condition: new, Stainless steel bottle filler with 3 filling heads The bottle filler with pump is made entirely of stainless steel. The filler is equipped with heavy-duty, industrial filling heads that allow for automatic and adjustable filling height of the bottles. The system is suitable for wine, beer, oil, detergents, and more. • Made entirely of stainless steel, including all connections, floats, and nuts • Can be steam sterilized • Capacity: 130 l/hour per filling tube • With mechanical float valve in the reservoir • 3 filling heads • Optionally with pump Dcodev Srcijpfx Adajb This bottle filler is equipped with filling heads for fruit juice as standard. ⚙️ Technical information Capacity: up to 400 L/h Material: WNo. 1.4301, AISI 304 stainless steel Dimensions: Length: 820 mm Width: 500 mm Height: 1910 mm Weight: 22 kg With bottle filler: 28 kg

Year of construction: 2025, condition: new, These tanks are ideal for cider mills and wineries for contract pressing. They can serve multiple customers simultaneously and continuously without having to stop pressing. With the help of valve settings, you can designate the specific tank for specific customers. The juice does not mix with other juices. Depending on customer preferences, we manufacture containers in various sizes: 200 L, 500 L, 1000 L. Technical Information • Capacity: 300 L (3x100L) • Material: Wnr. 1.4301, AISI 304 stainless steel • With floating lid • Fill level indicator Dimensions: • Length: 1250mm • Width: 508mm • Height: 350mm • Diameter: 398mm • Overall height: 1100mm • Tank height without legs: 850mm Dodstpxm Depfx Adascb • Leg height: 250mm • Weight: 60kg The dimensions apply to one container!

Year of construction: 2025, condition: new, Our belt presses are equipped with two large pressing rollers that extend the pressing process, ensuring particularly gentle juice extraction. The result is a clear, foam-free juice of high quality. The pneumatic belt tension and automatic belt control guarantee consistently high quality throughout the entire pressing process. The belt press features an automatic brush cleaning system, eliminating the need for a high-pressure cleaner. The belt is cleaned by six specially designed water nozzles. For cleaning, only a compressor with 8 bar pressure and a ½” water connection are required. Thanks to these special nozzles, water consumption is reduced, leading to lower operating costs. The open design allows for quick and uncomplicated cleaning, which can be completed in just a few minutes. Technical Information: • Nominal capacity: 950 kg/h • Power requirement: 1 kW, 400 V, 16 A • Material: WNr. 1.4301, AISI 304 stainless steel • Compressed air requirement: 50 l/h at 6 bar • IP65 electronic control cabinet • Juice yield: Up to 75% • Fully automatic and stepless control of belt speed • User-friendly • Easy to clean • Rollable machine feet Dcjdjv Sq S Nspfx Adaob Dimensions: Length: 2230 mm Width: 1450 mm Height: 1250 mm Loading height: 1240 mm Pomace discharge height: 500 mm Juice outlet height: 370 mm Weight: 540 kg Optional: Juice collection tray ISW 100 Automatic juice discharge

Year of construction: 2025, condition: new, Our belt presses can be dismantled and cleaned in just a few minutes without tools. The belt press is easy to operate. Effective belt cleaning is achieved by three spray nozzles and silicone wipers. Thanks to this innovative solution, the system can be operated for the economical production of fruit and vegetable juice. You don’t need a high-pressure cleaner, so you save on electricity costs when pressing. All you need is a compressor with 8-bar pressure and a ½" water connection. • Fully automatic and infinitely variable belt speed control • Easy to clean • Easier maintenance • Rolling machine feet • Automatic belt correction Technical Information Rated output: 350 kg/h Working width: 400 mm Juice yield: up to 75% Power consumption: 0.55 kW, 400 V, 16 A Material: Wnr. 1.4301, AISI 304 stainless steel Air Operating pressure: 6 bar approx. 50 l/h Dimensions: Length: 1,080 mm Width: 1,070 mm Height: 1,320 mm Weight: 297 kg Dcsdpfx Asv Sq Nbodaeb Optional: automatic juice draining

Year of construction: 2025, condition: new, The press is suitable for high juice yields of various fruits such as apples, pears, blackberries, strawberries, blueberries, currants, carrots, herbs, quinces, onions, etc. The types of fruit listed above have been tested by our customers with our packing presses. The system is equipped with an automatic pressing programme so that the system switches off the pressing pressure itself at the end of the pressing process. You can order the machines with one or two turning juice basins. Accessories: Dcedpotz Sp Djfx Adaob • 18 pieces of press cloths • 20 pieces of press grate Technical Information • Output: 600 kg/h • Pressing force: 18 T • Power consumption: 2.2 kW, 230 V, 10 A • Material: Wnr. 1.4301, AISI 304 stainless steel Dimensions: • 1,250×1,370×1,520 mm • Weight: 450 kg • IP65 electronic switch boxes • High yield up to 60–80%

Year of construction: 2025, condition: new, The press is suitable for high juice yields of various fruits such as apples, pears, blackberries, strawberries, blueberries, currants, carrots, herbs, quinces, onions, etc. The types of fruit listed above have been tested by our customers with our packing presses. The system is equipped with an automatic pressing programme so that the system switches off the pressing pressure itself at the end of the pressing process. You can order the machines with one or two turning juice basins. Accessories: • 18 pieces of press cloths • 20 pieces of press grate Technical Information • Output: 1000 kg/h • Pressing force: 18 T • Power consumption: 2.2 kW, 230 V, 10 A • Material: Wnr. 1.4301, AISI 304 stainless steel Dimensions: Dodpfxetz Spko Adaecb • 1,000×1,680×2,720 mm • Weight: 720 kg • IP65 electronic switch boxes • High yield up to 60–80%

Year of construction: 2025, condition: new, Our systems can be dismantled down to the base frame in just a few minutes for effective cleaning. Our belt presses are suitable for pressing fruit and vegetables. Effective belt cleaning is done with the help of brushes and a belt washing system. You only need an air compressor to operate the system. Technical Information • Rated output: 650 kg/h • Power consumption: 1 kW, 400 V, 16 A • Material: Wnr. 1.4301, AISI 304 stainless steel • Compressed air requirement: 50 l/h 6 bar • IP65 electronic control cabinet • Juice yield: Up to 75% • Fully automatic and infinitely variable belt speed control • Operator friendly • Easy to clean • Rolling machine feet Dimensions: Length: 2,230 mm Width: 1,250 mm Height: 1,250 mm Dodpfsv Sq Rxox Adajcb Height assumptions: 1,240 mm Height of pomace discharge: 500 mm Height of juice outlet: 370 mm Weight: 480 kg Optional: Juice collection tank ISW 100 Automatic juice draining