Grape press

DELLA TOFFOLA PE 12

Condition: ready for operation (used), The crown caps are manually fed into the dispensing chute, the machine places the crown cap onto the bottle, and presses it into place. Hfsdpfxjfh Dlro Aiqjl

Condition: used, Year of construction: 2014, Overview This complete brewing equipment is mainly from 2014 and is becoming available because the company is closed. The equipment is already dismantled and stored properly. Scope  - Water Softener - Compressor | Josval Sauber 240 D Hfodpjtka Aqsfx Aiqol - Mill | Robix ROPPI 250 - Thermindus Boiler Ps(Barg 6) PL (Barg 10.4) Ts Max 165, Ts min 10, kW 34 - Portable Pump 2.20kw INOX - Hoses, cones, keys - Manual Isobaric Bottling Machine 4 spouts - Automatic Labeler | Arca L10-8128 - 2x Rotating Table with Regulator 100cm Diameter, for input and output of bottles or cans - Videojet 1220 Batch Coder - Infrico Undercounter Refrigerator with 3 Doors - Brewhouse | Spadoni | MBS 600 VAP | 2014 - Spadoni 600, Masher 680 Liters, Bottom Filter, Rotating Blades, Transfer and Recirculation Pump Boiler 720lt with Whirlpool, with Boiler Pump and Spadoni Plate Cooler - Hot Water Tank | Spadoni | 10hl - Cold Water Tank | Spadoni | 10hl - Mixing Tanks | Spadoni | 1.5hl with Tangential Entries - Mixing Tanks | 1.5hl with Tangential Entries - 2x Isobaric Fermenters | Spadoni | 2.5 bar 15hl - 2x Isobaric Fermenters | Spadoni | 2.5 bar 30hl - 2x Atmospheric Fermenters 1bar Pressure 1.2hl | BREW TECH - Atmospheric Fermenters 1bar Pressure 1.2hl, (Jacketed) | BREW TECH

Condition: used, Year of construction: 2017, machine/vehicle number: LC560, Used Processing Line for small dairy products 2000 L/h Milk Reception and Initial Storage The Used Processing Line for Small Dairy Products 2000 L/h begins with a milk reception unit consisting of two Lactofreeze tanks and a receiving pump. Initially, operators channel raw milk into the tanks, where it remains chilled. As a result, the system ensures thermal stability before processing. Furthermore, this setup minimizes the bacterial load while allowing continuous transfer to the pasteurization stage. Pasteurization and Separation Next, the pasteurization phase uses a plate heat exchanger with a retention section and auxiliary systems, all rated for 2,000 liters per hour. Specifically, the pasteurizer rapidly heats and holds milk at a predefined temperature to eliminate pathogens. Then, the GEA WESTFALIA separator—rated at 3,000 L/h—performs cream separation. Simultaneously, the RANNIE homogenizer (1,000 L/h) reduces fat globules, thus enhancing emulsion stability and preventing cream rise. Fermentation and Coagulation Following thermal treatment, the milk proceeds to fermentation. Here, operators use an insulated double-wall fermentation tank with a 1,000-liter capacity and planetary agitator. Consequently, they maintain uniform bacterial activity and precise temperature control. In parallel, a 1,000-liter coagulation vat equipped with a planetary mixer initiates the curdling process. Both tanks ensure optimal protein structuring for yogurt, cheese, and cultured cream products. Cheese Processing and Draining After coagulation, the Used Processing Line for Small Dairy Products 2000 L/h continues with cheese processing. The system includes a 500-liter vat with a draining sieve and two cheese draining tables. Therefore, operators can efficiently handle large curd volumes. Moreover, these components simplify whey separation while ensuring sanitary compliance. Additionally, their design supports easy cleaning and cross-contamination prevention. Packaging Operations Once products are ready for packing, the line integrates semi-automatic and automatic solutions. First, a semi-automatic filler doses pasteurized milk into 1-liter bags. Subsequently, the yogurt cup filler automatically fills and seals 75 mm and 95 mm cups at up to 1,800 units per hour. Meanwhile, the rotary labeling machine by ETICAP (2004) applies both front and rear self-adhesive labels on cylindrical cups. Importantly, the machine ensures consistent alignment and adhesion. Date Coding, Thermal Control, and Final Packing In addition, a Videojet 1220 coder (2019) applies expiry dates onto each product via belt conveyor. Further downstream, a vacuum packaging machine handles cream and cheese portions. Thermal utilities include a 115–150 kW solid fuel boiler (2014) with dual transfer pumps. At the same time, an ice water tank (5,000 L, 2014) and a cooling unit (2018) maintain temperature consistency across the line. Laboratory and Accessories Alongside processing units, the Used Processing Line for Small Dairy Products 2000 L/h features a dedicated laboratory. Specifically, it houses analytical tools for quality control and milk analysis. Additionally, the line includes 300 plastic crates for storing and transporting yogurt cups. System Shutdown and Storage Finally, operators shut down the line in September 2023. Before dismantling, they cleaned ... Hedew Ahg Rspfx Aiqjfl

Condition: used, Year of construction: 1999, Overview The micro brewery was manufactured in 1999 by theGerman manufacturer BERAPLAN. All equipment is in good condition. A new wort copper was added in 2018.  List of equipment: 1. Mash Tun Made by Beraplan in 1999 Cylindric shape with conical ground Material: stainless steel AISI 304 Inner diameter: 2000 mm Height: 1600 mm Height conical part: 20 0mm Volume: maximum 38 Hl Double sidewall Insulation Heated by steam, which can be regulated Hot and cold water inlet at the bottom Can be emptied through the bottom 4 CIP balls PT100 2 agitators Mach pump with variable speed drive 2. Lauter Tun Made by Beraplan in 1999 Cylindric shape with flat ground Material: stainless steel AISI 304 Inner diameter: 2000 mm Height: 1200 mm Volume: maximum 37 Hl Filtering ground with trapezoidal perforations High precision valve to regulate the flow rate Hot and cold water inlet at the bottom 4 CIP balls PT100 3. Wort Copper Made by FRACCHIOLLA in 2018 Heated by steam Cleanning balls Temperature sensor Transfer pump from Alfa Laval Solid C-2 (3 kW) 4. Whirlpool Made by Beraplan in 1999 Cylindric shape with flat ground Material: stainless steel AISI 304 Inner diameter: 2000 mm Height: 1250 mm Volume: maximum 40 Hl Double sidewall CIP balls Transfer pump from Alfa Laval Solid C-2 (2,2 kW) 5. Hot Water Tank Cylindric shape with flat ground Material: stainless steel AISI 304 Inner diameter: 2000 mm Height: 2700 mm Volume: maximum 85 Hl Double sidewall CIP balls Transfer pump from Alfa Laval Solid C-2 (7,5 kW) Heated by steam with temperature regulation 6. Heat Exchanger Made by MDC (France) Plate heat exchanger double zone model: RDC 307 Capacity: 30 Hl/h from 85°C to 16°C 7. Ice Water Unit Capacity: 1000 l New pump Hfodpfel Hxmdex Aiqel

Condition: used, Year of construction: 2013, Overview  This brewhouse system with malt mill and plate heat exchanger was manufactured in 2013 by Spanish company Slowbeer. The system consists of a 2‑vessel brewhouse (mash tun and boil kettle), a malt mill, and a plate heat exchanger, designed for complete brewing processes including mashing, boiling, and whirlpool. Hfedpfx Aioyw Abfoqol Technical data  - Capacity: 250 liters per batch - Application: Brewing - Configuration: 2-vessel brewhouse (mash tun + boil kettle), complete brewing process (mashing, boiling, whirlpool) - Heating system: Electric - Temperature control: Automatic - Safety system: Thermal safety alarm - Cooling: Plate heat exchanger - Electrical supply: 400 V, three-phase - Installed power: 15 kW Scope of Delivery  - Brewhouse (2 vessels) | Not provided | MB 250 E | 2013 | Mash tun and boil kettle, electric heating, automatic temperature control - Plate heat exchanger | Sondex | S4A-IG16 | 2013 | Transmission surface: 0.63 m², Design pressure: 10 barg, Volume: 1.5 L, Design temperature: 0 – 100 °C - Malt mill | Sommer | Piccolo 11S | 2013 | Capacity 100–150 kg/h

Condition: used, mileage: 1,702 km, power: 17 kW (23.11 HP), first registration: 04/2015, fuel type: diesel, overall weight: 1,550 kg, color: green, gearing type: automatic, suspension: other, number of seats: 4, operating hours: 1,702 h, Equipment: all wheel drive, trailer coupling, HU/AU new, diesel, automatic, all-wheel drive, first registration 20.04.2015, 17 kW, 854 cm³, 1,702 operating hours, 4-seater, trailer coupling, tilting cargo bed, permissible gross weight 1,550 kg. FOR US, CONDITION AND FEEL ARE DECISIVE; PRICE IS SECONDARY. For further questions, Mr. Faller is available at the provided number. //*TRADE-IN, PART-EXCHANGE, OR SECURING A LOAN WITH YOUR VEHICLE, AS WELL AS FINANCING POSSIBLE! All information provided without guarantee.* Further offers can be found on our homepage. The description and stated information do not constitute a guarantee and are non-binding. Only the purchase contract concluded at the dealership upon vehicle purchase is binding. Errors and prior sale reserved! Hfedpfx Ajx Hz Amsiqjl

Year of construction: 2021, condition: used, We are offering these used DME 40HL 40HL insulated fermentation tanks, manufactured in 2021. Manufacturer: DME Model: 40HL Date of manufacture: 06/23/2021 Serial number: B5715-30-03 Year of manufacture: 2021 Condition: used Type: 40HL insulated fermentation tanks If you have any questions or would like more information, please send us a message or call us. Hjdpfx Aoza Twnjiqsfl

Condition: new, Year of construction: 2021, machine/vehicle number: 2200383125, Sales exclusively to customers with a German billing and delivery address! Process chiller / refrigeration unit / chilled water system, air-cooled, Type: TAEevo Tech 1002 P3-20-OFF MTA S.p.A. Hfodpelgzcdefx Aiqel TAEevo Tech 1002 P3-20-OFF are air-cooled compact water chillers suitable for outdoor installation (from -20°C to +46°C). Includes crankcase heater, phase monitoring, buffer tank 950 liters, built-in P3 circulation pump, and winter package -20°C (variable speed control of the fans, condenser pressure control). Chilled water outlet temperatures from -10°C to +30°C can be adjusted. Cooling capacity kW 200 [682428 Btu (IT)/h] Chilled water temperature outlet/inlet (°C): 7 / 12 Flow rate (m³/h) 34.2 Available pump pressure (bar) 3.09 Ambient temperature (°C) 32 Refrigerant R 410A Electrical data: Voltage V 400, Frequency Hz 50, Phases Ph 3, Max. power consumption (kW) 99 Max. current (A) 167 Starting current circuit (A) 371 Protection class: IP54 Dimensions: Length (mm) 4655, Width (mm) 1250, Height (mm) 2155 Weight (kg) 2998 Connection Victaulic DN 100 Serial No.: 2200387535 Year of manufacture 2022 Condition: Visually 2, Technically ok Used Price: on request in Euro (plus VAT ex Nettetal) – 3 months warranty Used machines may have visual imperfections due to their use. (Subject to technical changes and prior sale!) Location: MTA Deutschland GmbH, 41334 Nettetal

Condition: like new (used), 4 x stainless steel pressure tanks, insulated, temperature-controlled, with agitator connection Technical data / dimensions Available quantity: 4 Volume: approx. 4325 liters Tank type: Pressure tank Condition: used Suitable for food: yes Design: upright Diameter inside: approx. 1,500 mm External diameter: approx. 1,700 mm Cylindrical height: approx. 2,000 mm Hfedpfx Ajtv Rm Seiqsl Total height: approx. 3,684 mm Weight: approx. 1,400 kg Specific weight of the medium: 1.0 to/m³ Operating pressure: overpressure/underpressure Operating pressure: -1/+6 bar Test pressure: 7.5 bar Wall thickness bottom: approx. 8 mm Wall thickness top: approx. 12 mm Wall thickness jacket / cylinder: approx. 6 mm Ground clearance: approx. 700 mm Operating temperature: 150 degrees Celsius Material / composition Material inner jacket: V4A (1.4435) Material double jacket: V2A (1.4301) Feet material: Stainless steel Outer surface: Mirror polished Ra

Condition: used, Year of construction: 2020, Overview  This can filler and seamer was manufactured in 2020 by the Italian company Eurostar. The Canfill 5 One is a compact and efficient filling and closing system designed for small-scale beverage producers. Suitable for both carbonated and still drinks, it offers an ideal solution for breweries, cider producers, or craft beverage facilities looking for professional filling performance in a small footprint. The machine has seen very limited use — only about 1,500 cans have been filled — and is therefore in excellent, near-new condition. Technical data  - Capacity: Hfjdpfsxnmv Esx Aiqol - 2,000 cans/hour at 0.33 L - 1,500 cans/hour at 0.5 L - Compatible formats: Standard and Sleek cans (not suitable for Slim cans) - Filling system: Isobaric (for carbonated products) - Product types: Beer, cider, soft drinks, or similar beverages - Condition: Used – as new (only 1,500 cans filled)