Pasteurizer 2000 Oil

Kreuzmayr 2000 Oel

Year of construction: 2020, condition: new, 1000l/h Stainless steel frame on 4 adjustable feet Minimum / Maximum Level sensor in the pressure tank Stainless steel pressure vessel The product is pressed through a multi-nozzle head in the tank ; Product Pump: Inlet check valve of the product Rsdocx Smbjpfx Akijch Sight glass at the inlet of the product CO2 pressure control valve for installation on the CO2 bottle Sight glass in the pressure vessel Max. Pressure : 6 bar incl . electronic control incl . booster pump

Condition: not inspected (used), Year of construction: 1985, functionality: fully functional, pressing force: 50 t, bale length: 1,000 mm, bale width: 750 mm, bale height: 750,750,750 mm, bale weight: 500 kg, input voltage: 400 V, overall weight: 7,500 kg, oil tank capacity: 500 l, power: 30 kW (40.79 HP), empty load weight: 7,500 kg, input frequency: 50 Hz, Manufacturer: Paal Typ: Pacomat V Rcedpfx Ajic Rl Dskieh Year of construction: 1985 Press power main press: 50 t Specific press capacity: 5 kg/cm² Feed channel: 1.000 x 720mm (l x w) Theoretic throughput rate: 200 cbm/h Bale size: 700 x 1.000 mm (w x h) length adjustable Driving motor: 30 kW Bale weight: approx. 500 kg Machine weight: approx. 8000kg The hydraulic unit is functional, the drive motor is in the removed state.

Condition: new, Year of construction: 2024, Gold River SWZ-700 water separators Application description: The GOLD RIVER SWZ series separator has been designed for special tasks, it can cope with the most difficult materials that contain many properties that disturb the separation process in separators commonly available on the market. SWZ water separators separate heavy fractions (non-ferrous metals) from, among others, plastics in the process of recycling secondary raw materials. SWZ separator equipped with a four-section copper water system equipped with radial nozzles with variable linear geometry. The separator uses the latest divided type of separation mat. The development of a modern module for preliminary division and preparation of material guarantees the purity of recovered raw materials in a very short time (plastics, metals). Why a water system? Our device uses a system similar to that used in the gold recovery industry. We use water as a carrier and a force that affects the materials in a gentle way. In the water system, all particles with higher mass are gently washed out and separated, generating no losses during the entire separation process. The properties of water together with our proprietary solutions are unrivaled compared to, for example, air separators. SWZ type separators are used: Separation of heavy from light materials (metal granulates contaminated with plastic, foil, paper, cotton, fibers) Cleaning plastics after air separators (dry) Separation of metals in cable and non-ferrous metal recycling lines The SWZ-700 water separator, thanks to the use of the latest module, performs the separation process in a very short time, therefore it is characterized by a high hourly efficiency of separated material of approximately 1200 kg/h. Description of action: The material fed into the separator goes through the transport channel to the module for initial fraction division into its mass and humidity changes. Some of the material is separated at this stage. In the second part of the module, the humidity of the remaining batch changes. Then the material falls onto the separation table where the final fraction separation takes place. As a result of this process, we obtain valuable materials from both sides of the separator. Rodeua Tbwspfx Akiech Construction description: The massive structure and the inertial drive of the separator are made of materials appropriately selected to withstand the overloads resulting from vibrations. The supporting frame ensures excellent stiffness and failure-free operation for many years. Due to the type of vibration drive, the design does not require the installation of a soil separator. Separation table equipped with hydraulic adjustment of the angle of inclination. The separation table has a special module for initial division of fractions into their mass and preparation for final separation. The water system has several water pressure valves. The water circulation in the separator is closed. There is no need for constant access to an external water source because the device works using the water already in the tanks. Based on experience and continuous research in our laboratories. We are able to provide you with separators individually adapted to the specific nature of the material being separated. In various versions and sizes. SWZ-700 separators are manufactured to individual order.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: SF100s.01.26, screw diameter: 200 mm, total length: 3,200 mm, total height: 2,200 mm, overall weight: 400 kg, heating capacity: 10 kW (13.60 HP), pressure: 2 bar, type of input current: three-phase, input frequency: 50 Hz, input voltage: 380 V, warranty duration: 24 months, Machine for cheese streching, dozing, mozarella and other. Rcodpot I Dxwofx Akijh

Condition: used, Year of construction: 1995, Overview The bottle washer "Sirio 7" from the German manufacturer MAG was built in 1995. Maintenance was carried out regularly by MAG. The machine can be inspected and tested in person. Technical details  Capacity up to 7,000 bph Bottle cells for 1.0 liter bottles (smaller bottles can also be used, but additional insertion plates are required) Diameter of bottles: 78 - 90 mm Bottle height: 288 - 310 mm Bottle cells per row: 10 Dimensions (LxWxH): 7,880 mm x 3,045 mm x 3,325 mm Empty weight: 14,300 kg Full load weight: 25,600 kg Installed power: 20.85 kW Heating system: Steam 3 bar Rcodotrbrqspfx Akish

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1985, Jaw crusher, used Manufacturer: Skoda Type: 1017 / 1200 x 900 Feed opening: 1000 x 700 mm Discharge size: 130-250 mm Electric motor: 130 kW Feed hopper Conveyor belt with transfer hopper Rjdsyluqyspfx Akioch

Condition: like new (used), Year of construction: 2015, operating hours: 12,500 h, machine/vehicle number: EWADC22C-XS003, cooling capacity: 2,000 kW (2,719.24 HP), type of input current: three-phase, type of cooling: air, ambient temperature (max.): 46 °C, ambient temperature (min.): 35 °C, TECHNICAL SPECIFICATIONS • Brand: Daikin | Model: EWADC22C-XS003 • Product type: Air-cooled screw chiller • Year of construction: 2015 • Condition: Used • Operating hours: 13,000 – 14,000 h (as declared, not verified) • Cooling capacity: 2,002 kW (Daikin catalog value) | 1,933 kW (2014 selection document) • Cooling capacity (kcal/h): approx. 1,721,700 kcal/h (2,002 kW) | approx. 1,662,400 kcal/h (1,933 kW) • Efficiency (2014 selection document): EER 2.63 | ESEER 4.02 | IPLV 4.47 • Rating conditions: 12/7 °C water | 35 °C ambient • Evaporator: Shell & tube (direct expansion) | water volume 850 l | max. water-side pressure 10 bar • Nominal water flow: 92.2 l/s • Water inlet / outlet: 12.0 °C / 7.0 °C • Water connection: 273 mm • Insulation: Closed cell • Condenser: Aluminium fins | internally grooved copper tubes • Fans: 30 pcs | Ø800 mm | propeller type, glass-fibre reinforced resin | 900 rpm • Fan motor power: 52.5 kW • Nominal air flow: 160,327 l/s • Compressor: 3 x HSA2690524 | asymmetric single screw, semi-hermetic • Oil charge: 75 l • Capacity control: Stepless 25% – 100% • Start method: Star-delta (Y-Δ) • Refrigerant: R-134a | 360 kg | 3 circuits • Power supply: 400 V | 3 phase | 50 Hz | tolerance 10% • Nominal running current: 1,100 A • Max. starting current: 1,486 A • Max. current for wire sizing: 1,608 A • Control panel: MicroTech III • Remote monitoring: Modbus RTU | BACnet/IP | LonWorks | TCP/IP • Temperature regulation accuracy: 0.1 °C • Protections: High/low pressure | oil pressure | motor temperature | freeze | phase monitoring • Sound power: 104 dB(A) • Sound pressure: 81 dB(A) at 1 m • Dimensions: Length 14,785 | width 2,285 | height 2,540 mm • Weight: 12,600 kg (unit) | 13,470 kg (operating) DESCRIPTION Offered with the assurance of Özsayın Soğutma, active in industrial refrigeration since 1982. The unit offered is a Daikin EWADC22C-XS003 air-cooled screw chiller. Current Daikin catalog value for this model is 2,002 kW; the 2014 selection document of the unit states 1,933 kW (12/7 °C water, 35 °C ambient). Designed for large plants with continuous cooling demand. DEVICE CONDITION • Condition: Used • Ready for sale • Condition details and available documents are shared at the quotation stage TECHNICAL ADVANTAGES • 2,000 kW class cooling capacity • 3 independent refrigerant circuits | 3 screw compressors • Stepless capacity control 25% – 100% • MicroTech III control with BMS connectivity • R-134a refrigerant APPLICATION AREAS • Industrial process cooling • Plastic injection and extrusion lines • Food processing and cold storage • Chemical and process plants • Office and commercial buildings (comfort cooling) OZSAYIN DIFFERENCE At Özsayın Soğutma we offer complete solutions, not only equipment sales: • Chiller sales and rental • Overhaul and remanufacturing services • Compressor maintenance and overhaul • On-site service and technical support • Spare parts supply • Project and engineering support SALES & TRUST • Ready for sale Rcedpfx Asuma Thekish • Technical details are shared at the quotation stage • Commissioning support available DELIVERY & PROCESS • Shipment across Türkiye • Export and customs process support • Delivery time and scope stated in the quotation

Year of construction: 2026, condition: new, Specifications: - Performance: 2000 L/h Rodpfx Asfhb I Hjkisch - Electric demands: 0,5 kW, 230 V, 6 A, monophase - Material: WNr. 1.4301, AISI 304 stainless steel - Dimensions: 550x1075x350 mm - Weight: 50 kg - IP65 certified electronics - Food industrial impeller pump - Juice level sensors - Fully automatic operation, very easy to clean. - With 4pcs wheels. Requires minimal maintenance. - The machine is suitable for any Maurer press.

Condition: used, Year of construction: 2018, Overview  The Gruber AFD6 is a filling machine for bottles and party KEGs that was produced by the German manufacturer Gruber in 2018 and has an operating time of 725 hours. The machine is available immediately. Technical details Rcodpfju I Hr Uox Akish - Output - 800 bph (at 0.33l) - 750 bph (at 0.5l) - 600 bph (with 1.0l) - 400 bph (for 2.0l) - 240 bph (with 5.0l party KEG) - Output varies depending on CO2 content and beer temperature (in practice, 1,000 bph could be achieved at 0.33l) - Long tube filler with 6 filling points - Fully automated filling process - Single or double CO2 flushing - Siemens S7 control system with touch panel - Operating hours: 725 hours

Condition: new, Pasteurizer with tube heat exchanger Nominal capacity 2,000 l/h (80°C pasteurisation temp., 10°C inlet temp. juice) Thermal rating approx. 180 kW Electrical rating 1.8 kW Electrical connection 230V 50Hz (1 phase) Electrical protection 16 A Dimensions: Length 1,715 mm Redjb Nt T Tspfx Akijch Width 900 mm Height 1,900 mm Weight (heating circuit drained) 500 kg Weight (heating circuit filled) 600 kg Heating oil consumption approx. 19 litres/h Max. exhaust temperature: 180°C Noise level (LW, A) 83 dB