Used Juice for sale (270)

Condition: like new (used), JBT Industrial Finisher / Refiner – Stainless Steel JBT industrial finisher in stainless steel, designed for the continuous refining of pulps, purees, and food products, allowing the separation of the usable fraction from peels, seeds, coarse fibers, and other undesired solids. This type of equipment is typically used after crushing, extraction, or preheating operations to obtain a product with a finer and more homogeneous texture before subsequent stages of concentration, heat treatment, or packaging. The system operates using an internal rotor and a perforated sieve or screen, performing continuous mechanical separation between the refined product and solid waste. MAIN FEATURES -Manufacturer: JBT -Type: Industrial finisher / refiner -Application: refining and separation of pulps -Automatic and continuous processing -Rotary refining system -Internal separation sieve / screen -Solid-liquid / pulp-waste separation -Continuous product feed -Independent product and waste discharge -Construction primarily in stainless steel -Driven by an electric motor -Closed processing chamber -Robust design for industrial operation -Access for cleaning and maintenance -Integrable into continuous processing lines PROCESS The product, previously crushed or processed, enters the JBT finisher continuously. Inside, the rotor drives the product against a perforated refining surface. The pulp, puree, or liquid fraction that meets the required size passes through the screen, while larger particles remain retained and are conveyed to a separate discharge. This process allows operations such as: Refining of pulps and purees Separation of peels and seeds Removal of coarse fibers Fgedpfxjyz Ttms Agxoi Reduction of undesired solids Homogenization of the texture Preparation of product before concentration Pre-treatment prior to aseptic sterilization APPLICATIONS Especially suitable for tomato industries, fruit and vegetable processors, juice, pulp, puree, concentrate, and sauce manufacturers. Depending on the screen and configuration installed, it can be used for tomatoes, fruits, and various vegetable products, forming part of industrial extraction and refining lines. It can be integrated with crushers, preheaters, pumps, evaporators, aseptic sterilizers, and fillers. Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Condition: used, Reusable glass bottle filling line for filling fruit juice and juice mix drinks. The filling line consists of the following components: - New glass bottle lifter (Kettner, 1985) with pallet loading, gripper head, empty pallet removal, bottle table and intermediate layer remover - Empty palletiser (Kettner 1994) with pallet loading, gripper head, crate table and empty pallet removal - Unpacker (Kettner, 2002) with packing heads and gripper tulips - Crate washer (Bohrer), crate cleaning trough with two crate turners - Unscrewing machine (Adelski, approx. 1990) with 12 unscrewing heads - Bottle cleaning machine (Krones, 1994) single-end machine - Empty bottle inspector (Heuft) for checking the base, mouth, side walls, thread and residual liquid - Filler (Bertolaso, approx. 1990) for hot filling with 60 filling valves and capper for twist-off caps. - Tunnel cooler (Niko, 2015) for spray cooling of the filled beverage - Labelling machine (Krones) for cold glue labelling of belly, back and neck labels - Label inspection (Metec) - Inkjet printer (Markem-Imaje, 2012) for best-before date marking - Packer (Kettner, 1989) with packing heads and gripping tulips - Palletiser (Kettner) with empty pallet feeding, gripping head and raised working platform with control panel - Pallet securing device (Bornbinder) for strapping the pallets with a horizontally applied cord - Film wrapper (Robopac) for wrapping the pallets with stretch film Fsdoz D Hmmopfx Agxogi Additional title: Returnable bottle filling line with palletising, year of manufacture 1985 - 2015 Capacity: 15000 bo/h referring to 0.5 l bottles Formats: 0.2 l; 0.25 l; 0.5 l; 0.75 l, 1.0 l bottles / 6-packs, 12-packs, 20-packs and 30-packs / twist-off caps / Euro and brewery pallets Operation / Control: S7-300 (pallet wrapper), otherwise S5 or Schleicher control system Features: New glass lifter, depalletiser, unpacker, crate washer, unscrewer, bottle cleaning machine, empty bottle inspector, Glass bottle filler and capper, tunnel cooler, labelling machine, label inspector, date coder, packer, palletiser, pallet strapper, pallet wrapper

Condition: like new (used), Horizontal Mixing Tank ROSSI & CATELLI 3,000 L – Stainless Steel Fedpozw E Aiofx Agxegi ROSSI & CATELLI 3,000-liter horizontal mixing tank, designed for the mixing, homogenization, and intermediate storage of liquid and semi-liquid products in industrial processes within the food industry. Manufactured by ROSSI & CATELLI, the equipment features a horizontal cylindrical configuration and includes a motorized agitation system, allowing the product to remain in motion and achieve uniform mixing throughout the process. Its 3,000-liter capacity and stainless-steel construction make it a particularly interesting solution for facilities that require processing large volumes of product. MAIN FEATURES -Manufacturer: ROSSI & CATELLI -Type: Horizontal mixing tank -Capacity: 3,000 liters -Horizontal cylindrical configuration -Agitation/mixing system -Driven by a motor-reducer -Stainless steel construction -Integrated support structure -Top inspection/access hatch -Sanitary product connections -Product inlet and outlet -Integrated piping and connection system -Designed for batch industrial processes -Hygienic construction for the food industry -Integrable into existing processing lines APPLICATION The ROSSI & CATELLI 3,000 L is designed to perform mixing, homogenization, accumulation, and product maintenance operations within an industrial line. The agitation system keeps the components in motion, promoting uniform distribution and helping to prevent separation or sedimentation during certain phases of the process, depending on the characteristics of the product. It can be integrated with: Preparation and mixing systems Sanitary pumps Heat exchangers Pasteurizers Homogenizers Dosing systems Buffer tanks Filling equipment Complete processing lines APPLICATIONS Especially suitable for juice and beverage industries, fruit and vegetable processors, sauce manufacturers, purée producers, concentrate manufacturers, and other food industries that require a large-capacity tank with a mixing system. Depending on its configuration, it can be used with juices, purées, sauces, tomato products, concentrates, fruit preparations, and other liquid or semi-liquid products. The combination of ROSSI & CATELLI, 3,000-liter capacity, horizontal configuration, and agitation system provides a robust solution for industrial mixing and intermediate storage processes. Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Condition: excellent (used), PIERALISI Centrifugal Decanter – Stainless Steel PIERALISI industrial centrifugal decanter, designed for the continuous solid-liquid separation of products and suspensions using centrifugal force in industrial processes within the food industry. The equipment uses a high-speed horizontal drum with an internal screw conveyor, allowing for the continuous separation of phases with different densities. The solids are transported to the discharge area while the separated liquid phase is continuously evacuated. Fedpfx Ajzxcbfjgxjgi Its industrial construction in stainless steel, continuous operation, and compact design make this decanter a particularly interesting solution for processes that require clarification, separation, concentration, or solid recovery. MAIN FEATURES -Manufacturer: PIERALISI -Type: Horizontal centrifugal decanter -Application: Solid-liquid separation -Separation process using centrifugal force -Rotating horizontal drum -Internal screw conveyor for solid transport -Continuous separation and discharge -Continuous industrial operation -Construction primarily in stainless steel -Motorized drive -Protected work areas -Robust design for industrial use -Integrable into existing processing lines -Suitable for clarification and concentration processes PROCESS The PIERALISI decanter is designed to continuously separate components of different densities present in a pumpable product. The product enters the rotating drum, where the high centrifugal force causes the phases to separate. The denser solid components move towards the drum wall and are transported by the screw conveyor to the discharge, while the separated liquid phase is continuously evacuated. This principle allows for the following operations: Solid-liquid separation Clarification Solid concentration Dehydration Product recovery Separation of pulps and suspensions APPLICATIONS Especially suitable for food industries, fruit and vegetable processors, oils, juices, and other liquid products with suspended solids, depending on the equipment configuration. PIERALISI centrifugal decanters can be integrated with feed pumps, tanks, filtration systems, clarification systems, and other separation or processing stages. Its continuous operation allows it to be incorporated as either a stand-alone unit or within a complete industrial line. Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Condition: used, Year of construction: 2007, Overview The Enoveneta TOP 15 is a grape de-stemming and crushing machine specially developed for use in wine production. It offers a capacity of 15-16 tons per hour and has a robust design made of AISI 304 stainless steel. The machine has been offered for sale due to non-use by the owner and is in good condition. Technical details  Capacity: 15-16 tons/hour Energy supply: Standard voltage 400/3/50 Motor power: Stalk remover: 2.2 kW Motorized auger: 0.55 kW Weight: 300 kg Dimensions: Length: 2,700 mm Width: 1,000 mm Height: 1,500 mm AISI 304 stainless steel frame on castors Perforated cylinder made of AISI 304 stainless steel with holes in sizes 25/22, 22/22, or 22/18 Functions  De-stemming: separation of the grapes from the stems through a perforated cylinder Crushing: Adjustable beater bar for gentle processing Removable beater bar and cylinder for easy cleaning Juice extraction: Integrated juice extraction system Speed control: Variator for dosing auger and stalk remover Accessories Open lid with removable whipping boom and cylinder Electric control panel Fgedpfxou Tyzqs Agxsi

Condition: good (used), Kecol Maxiprime 800 drum pump Fedpfx Aeu S Rkmsgxjgi Stainless, pneumatically operated, 130L per min, up to 12mm solids, previously used for pumping fruit juices out of tote bins

Condition: used, water tank capacity: 30,250 l, Upright stainless steel container made of V2A, wine/fruit juice tank with 3 cooling plates, partly with digital temperature measurement - used - Volume approx. 30,250 liters Diameter approx. 2,500 mm Cylindrical Height approx. 5,600 mm Total height approx. 7,200 mm Outer surface: marbled Inner surface: 2B=IIIC ground Top end: Torispherical head 2 crane eyes Threaded weld-on socket DN 100 centrally connected to DN 40 with threaded socket DN 50 with fermentation lock valve DN 50 with check valve DN 50 Sprinkling ring Fgsdpfx Agowlg E Rexei Tank cylinder: Level indicator with bar and scale and standpipe valve DN 15 Manhole 420x320 mm Test tap DN 15 Ladder hook at top Immersion stem sleeve for temperature display Downwardly drawn CIP line with vent line DN 40 with connecting thread DN 50 Clear drain with angled seat valve DN 50 Cooling line CIP ball Bottom end: Torispherical head to Front-drawn floor sill with DN 50 angled seat valve and DN 50 outlet pipe with flange 4 spherical feet, height-adjustable, with washers Available quantity: 24 Otherwise, see photos

Condition: used, Year of construction: 2006, operating hours: 62,000 h, machine/vehicle number: R78, Technical Specifications & Performance DataThe Used filling machine TETRA PAK A3 Flex 1L slim 7500 bph is a 2006 aseptic form‑fill‑seal system designed for high-efficiency beverage production in cartons. Built by Tetra Pak®, it delivers precise, reliable filling for dairy and juice in Tetra Brik formats, making it a strong fit for industrial packaging operations seeking predictable uptime and hygienic performance.* Manufacturer: Tetra Pak®* Model: A3 Flex (Year 2006)* Category: Filling Machine – aseptic carton FFS* Nominal speed: up to 7,500 packs/hour* Machien Hours: 62.000 Hours* Container type: Brik (aseptic carton); format range subject to installed tooling* Product compatibility: Dairy (e.g., UHT milk), Juice (with/without pulp, low to medium viscosity)* Filling principle: Aseptic, volumetric dosing* No. of valves / heads: 1* Machine configuration: Linear (rotation: 0)* Changeover: Recipe-based format adjustments to minimize downtime* Safety features: Integrated guarding and interlocks* Documentation: Operator and technical manuals availableAdvanced Automation & Control SystemsFully PLC-controlled with an HMI interface, the A3 Flex provides recipe management, alarm diagnostics, and batch logging for robust traceability. The control platform supports connectivity with plant SCADA/MES for data acquisition and performance monitoring. Standardized I/O facilitates integration with upstream UHT/sterilization and downstream end-of-line equipment. Built-in safety circuits, interlocked doors, and emergency stops help protect operators during rinsing, filling, and downstream handling processes. Electrical and pneumatic interfaces are designed for common EU industrial standards.Production Line Integration CapabilitiesThis machine integrates seamlessly within a used bottling line or mixed packaging environment. It interfaces with upstream product treatment (UHT, homogenization, CIP/SIP) and downstream carton conveyors, checkweighers, inkjet date coders, case packers, and palletizers. While dedicated to cartons, it can share utilities, controls, and data infrastructure alongside parallel PET, glass, or aluminum can lines that include rinsing, filling, capping, and labeling machines. Format changes within the Brik family are completed via guided procedures and recipes to reduce changeover time and waste.Machine Condition & Maintenance HistoryCurrent status: UNDER MAINTENANCE. This second hand Tetra Pak A3 Flex is undergoing scheduled servicing to verify aseptic integrity, dosing accuracy, and sealing performance. Key wear parts are inspected and replaced as required. As part of the A3Flex-100V Upgrade, the machine was enhanced with the addition of 1 AB CPU, 2 AB network modules, 1 AB input module, 1 AB output module and 1 GE communication module. The equipment was upgraded from Danaher servo to AB’s latest servo, with 7 Danaher motors replaced by AB motors, together with network cables, communication cables, connectors and 2 pull ear motor bases. Maintenance logs, test reports, and commissioning checklists can be provided. Manuals are included to support rapid start-up and operator training.Automation and Servo Upgrade: The equipment has been upgraded from... Fjdpfx Ags Adt S Asxegi

Year of construction: 1979, condition: used, Westfalia Separator, last used in a fruit juice plant. The separator's control system was modernized by GEA. The product is clarified in the centrifuge bowls and conveyed further under pressure. Solids collect in the solids chamber and are periodically discharged automatically. During CIP cleaning, the cleaning fluid is pumped in a circuit. Additional title: Disc centrifuge Intake capacity: 22000 l/h flow rate for fruit juice approx. 4,000 l/h Drum velocity: 6500 rpm Density liquid phase: 1 kg/dm3 Density solid phase: 1.4 kg/dm3 Power: 18.5 kW Current: 37 A Voltage: 380 V Frequency: 50 Hz Length: 1485 mm Width: 850 mm Fgjdpfxsyr Ic No Agxoi Height: 1470 mm Weight: 1200 kg Material: Stainless steel surfaces that come into contact with the product Position: on a 685 x 585 mm foundation Features: Drum, drive, inlets for product and displacement fluid, control water inlet with solenoid valve, drain, solids outlet, control water drain, circulation monitor, oil sight glass, brake, control valve, hood flushing, pressure gauge

Condition: excellent (used), ALFA LAVAL CAF 2H/1 – Double-Head Aseptic Filler – Stainless Steel ALFA LAVAL CAF 2H/1, a 2-head aseptic filler, designed for the sterile filling of liquid, semi-liquid, and viscous food products into large-format aseptic packaging within industrial processing lines. The dual filling head configuration allows operation with two stations, facilitating process continuity and increasing operational flexibility. This type of equipment is especially suitable for packaging pre-sterilized products that must be maintained under aseptic conditions until sealing. Its stainless steel construction, protected filling zones, and automatic control system allow it to be integrated with sterilizers, aseptic tanks, and complete processing lines for fruits, tomatoes, and other food products. MAIN FEATURES -Manufacturer: ALFA LAVAL -Model: CAF 2H/1 -Type: Automatic aseptic filler -Number of heads: 2 -Dual filling station configuration -Product filling under aseptic conditions -Designed for pre-sterilized product -Automatic process control system -Sanitary product circuits -Construction primarily in stainless steel -Integrated process instrumentation and valves -Central control panel -Closed filling zones with safety guards -Roller conveyors for handling the packaging -Designed for industrial operation -Integrable into complete aseptic processing lines PROCESS The ALFA LAVAL CAF 2H/1 receives the product that has already undergone sterilization and guides it to the filling heads, maintaining the required hygienic conditions during filling. The packaging is positioned at the corresponding station and connected to the filling system, with the product transferred within a protected and controlled zone. Once filling is complete, the packaging can be removed and replaced with another to continue production. The 2-head configuration is particularly useful for maintaining an efficient workflow during packaging changeover operations. APPLICATIONS Especially suitable for processors of tomatoes, fruits, and vegetables, as well as manufacturers of purees, pulps, concentrates, juices, and sauces that need to package sterilized products for storage or distribution. Depending on the installed configuration, it can be used with aseptic bags in drums, bins, or other industrial containers. It can be integrated with aseptic sterilizers, buffer tanks, sanitary pumps, CIP systems, and UHT lines. Machine available for inspection. Fodpozxk Tpjfx Agxsgi Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Condition: excellent (used), POLYCITRUS FRATELLI INDELICATO ZX2 Industrial Extractor – Stainless Steel POLYCITRUS FRATELLI INDELICATO ZX2 industrial extractor, designed for the continuous extraction and separation of juice and pulp in the industrial processing of citrus fruits and other compatible fruits. The equipment features a large upper feed hopper and a horizontal processing chamber, where the product undergoes a mechanical action that allows for the extraction of the usable fraction and its separation from peels, seeds, fibers, and other solid residues, depending on the product and the installed configuration. Its construction, primarily in stainless steel, and its robust design allow it to be incorporated into industrial lines for the production of juices, pulps, and fruit derivatives. MAIN FEATURES -Manufacturer: FRATELLI INDELICATO -Designation: POLYCITRUS -Model: ZX2 -Type: Industrial fruit / citrus extractor -Continuous operation Fodpfx Aozxwyvsgxegi -Upper feed hopper -Horizontal extraction chamber -Mechanical extraction and separation system -Separation of liquid / pulpy fraction and solid residues -Differentiated discharges according to configuration -Driven by an electric motor -Construction primarily in stainless steel -Enclosure of the moving elements -Robust industrial structure -Access to the processing chamber for cleaning and maintenance -Suitable for integration into fruit processing lines PROCESS The fruit or raw material, previously prepared, is fed through the upper hopper and passes into the extraction chamber. Inside, the mechanical system exerts the necessary action to break, press, and/or separate the product, allowing the recovery of juice, pulp, or a combination of both, depending on the product being processed and the internal elements installed. During the process, undesired fractions, such as peels, seeds, and fibrous material, are separated and evacuated independently of the usable product. The resulting product can then be sent to: Refiners / finishers Screens Buffer tanks Centrifuges Homogenizers Pasteurizers Sterilizers Evaporators / concentrators Aseptic tanks Filling lines APPLICATIONS Particularly suitable for fruit processing industries, juice, pulp, fruit base, and citrus derivative manufacturers. Depending on the installed extraction elements and the prior preparation of the raw material, it can be used in different extraction, separation, and recovery processes for the usable fraction of the fruit. The POLYCITRUS FRATELLI INDELICATO ZX2 provides a robust solution for incorporating a continuous mechanical extraction stage into industrial fruit processing lines. Machine available for inspection. Additional technical information, production capacity, internal configuration, dimensions, additional photographs, or videos can be provided upon request.

Condition: excellent (used), AMENDUNI Industrial Grinding Mill – Stainless Steel AMENDUNI industrial grinding mill, designed for the crushing, grinding, and size reduction of food products prior to subsequent extraction, separation, refining, or processing stages. The equipment incorporates a feed hopper that directs the product towards the grinding chamber, where the rotating system performs the mechanical reduction of the raw material. Its configuration allows for continuous operation and integration with product feeding and conveying equipment. Its construction, primarily in stainless steel, combined with its robust industrial drive, makes it suitable for processing plants for fruits, vegetables, and other food raw materials. MAIN FEATURES -Manufacturer: AMENDUNI -Type: Industrial grinding mill -Application: Product crushing/grinding -Mechanical size reduction of raw material -Continuous operation -Integrated feed hopper -Grinding chamber -Rotating grinding system -Electric motor drive -Construction primarily in stainless steel -Continuous product input and output -Robust construction for industrial use -Designed for food processing -Integrable into existing production lines PROCESS The product is continuously fed through the feed hopper and passes into the grinding chamber. Inside, the rotating system performs the grinding and size reduction, obtaining a crushed product that can be discharged directly to the next stage of the process. This type of equipment is particularly useful as a preparation stage before operations such as: Fgedpfxszxcb Se Agxoi Extraction Pressing Solid-liquid separation Refining Screening Concentration Heat treatment Subsequent processing of pulps APPLICATIONS Especially suitable for fruit and vegetable processing industries, juice, puree, pulp producers, and other food processing plants that require reducing the size of the raw material before subsequent processing operations. Depending on the installed configuration, it can be used for the crushing of fruits, vegetables, and other food products intended for the production of pulp, juice, puree, or subsequent extraction and separation processes. The combination of AMENDUNI technology, continuous crushing, and industrial stainless-steel construction provides a robust solution for professional food processing lines. Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Condition: used, Year of construction: 2008, Overview This NIKO VP11e is a horizontal pneumatic (membrane) press for whole or destemmed grapes, built in 2008 by NIKO (Nikolaj Šraml s.p., Podnanos, Slovenia). The press is made entirely of stainless steel and runs a fully automatic, multi-stage pressing program once started: grapes are loaded through the two perforated cylinder doors or axially, an internal membrane inflates against the load to extract juice at progressively increasing pressure, and the cylinder rotates between stages to break up ("crumble") the pressed cake ahead of the next drain cycle. Juice drains into a wheeled collection pan under the cylinder with a pump connection; pomace is discharged by rotating the open door face-down over the pan. The press is mounted on castors for repositioning and remains still installed and under power at the seller's winery in Spain. It can be inspected in operation on request. Technical data - Manufacturer: NIKO (Nikolaj Šraml s.p., Podnanos, Slovenia) - Model: VP11e - Year of manufacture: 2008 - Machine type: horizontal pneumatic (membrane) press for grapes, mobile on castors - Cylinder volume: 1,100 L (cylinder Ø 920 mm) - Juice drainage pan (tina) volume: 450 L - Loading doors: 2, 640 x 420 mm each - Max. working pressure: 1.7 bar - automatic multi-stage program (pre-press 0.3 bar, then 0.8 / 1.2 / 1.7 bar for whole white grapes; 0.3 bar, then 0.8 / 1.2 bar for destemmed, fermented red grapes) - Integrated blower for membrane aspiration: -0.2 bar vacuum / +0.2 bar pressure - Power: 2.9 kW, single-phase 230 V (1/N/PE), 50 Hz - Mechanical protection: IP55 - Noise level: < 75 dB - Dimensions: approx. 2,520 x 1,270 x H 1,560 mm (with axial loading extension; 2,350 mm long without it) - Weight: approx. 430 kg Equipment - Pneumatic membrane pressing cylinder with integrated aspiration blower - Wheeled juice drainage pan with pump connection - Electric control panel with automatic pressing programs (incl. draining cycle) Fgjdpfx Agezk Eqmsxji - Axial loading option - Safety guard on drive elements, door interlock switch and STOP switch - OEM operating manual (Spanish) Condition Used - still installed and under power at the seller's winery. No further condition report has been provided by the seller; the machine can be inspected in operation on site. Availability Immediately. Location: Spain. Dismantling, handling, packing and truck loading can be quoted on request (EXW).

Condition: excellent (used), FENCO Multitubular Aseptic Sterilizer – Stainless Steel FENCO multitubular aseptic sterilizer, designed for the continuous thermal treatment and sterilization of liquid, semi-liquid, and viscous food products in aseptic processing industrial lines. The equipment uses a tubular/multitubular heat exchange system that allows for the indirect and controlled execution of the different phases of product heating and cooling. This technology is especially suitable for processes where precise thermal treatment is required before storage or aseptic filling. Its configuration with multiple tubular sections in stainless steel provides a large exchange surface and allows for the integration of different thermal stages within a single continuous process installation. MAIN FEATURES -Manufacturer: FENCO -Type: Multitubular aseptic sterilizer -Technology: Tubular/multitubular heat exchange -Continuous thermal treatment -Indirect product heating -Heating and cooling sections -Multiple heat exchange modules -Stainless steel construction Fjdpfx Aszw E R Tsgxsgi -Sanitary product connections -Integrated piping and valve system -Process pumps -Self-supporting industrial structure -Designed for aseptic processes -Integrable into complete aseptic processing and filling lines PROCESS The FENCO aseptic sterilizer is designed to circulate the product continuously through different heat exchange sections. Depending on the process configuration, the product can pass through preheating, heating, sterilization, holding, and cooling stages, controlling the necessary conditions before being transferred to a storage tank or aseptic filling system. Indirect exchange allows the treatment to be carried out while keeping the product separate from the heat transfer fluid. It can be integrated with: Preparation tanks Sanitary pumps Homogenizers Deaerators CIP systems Aseptic tanks Aseptic fillers Complete UHT/aseptic lines APPLICATIONS Especially suitable for the fruit and vegetable, tomato, juice, puree, concentrate, sauce, and other pumpable food industries that require continuous sterilization before aseptic packaging. Depending on its configuration, it can be used with fruit juices, pulps, and purees, concentrates, tomato products, sauces, and other liquid or viscous products. The combination of FENCO technology, multitubular exchange, and sanitary stainless steel construction provides an industrial solution for continuous sterilization and aseptic production processes. Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Condition: used, Year of construction: 2008, Overview Fgjdezb Adtepfx Agxsi This blowing machine was manufactured in 2009 by Italian manufacturer SIPA. The machine was part of a complete non‑returnable PET bottle filling line dedicated to juices production. It was used to produce small formats as 0.2 - 0.25 and 0.5 L PET bottles and operated at a nominal speed of 12,500 bottles per hour. The machine is described as being in perfect condition since it had been dedicated for a small private label production. The equipment becomes available as the seller has finished the production dedicated to fruit juices. Technical data - Capacity: 12.5000 bottles/hour - Year of manufacture: 2009 - Formats: 0.2 - 0.25 and 0.5 L - Application: Juices - Container material: PET - Neck finish: 38 mm - Air conveying system available Scope of supply - blow moulder Sipa SFR EVO 8 (2009) - preform feeding - preform container - preform tilting device - spare parts available - air conveying system available

Condition: used, Year of construction: 2005, machine/vehicle number: M268, Used Filling Monoblock GALDI RG50 up to 3000 brick/h Technical Specifications of the Used Monoblock GALDI Fsdpjvgvguofx Agxegi The Used Filling Monoblock GALDI RG50 up to 3000 bph offers high performance and reliability for producing fresh liquid products like milk, cream, and fruit juices. Consequently, it handles up to 3000 cartons per hour, making it ideal for medium-sized production plants that require fast and consistent output. Therefore, this machine stands out in terms of both speed and efficiency.Production Capacity and Carton SpecificationsGaldi developed the RG50 model to process up to 3000 cartons per hour. Moreover, the machine supports 0.25, 0.50, and 1-liter capacities, with cartons measuring 70 x 70 mm in B-style. Thus, these specifications ensure that Monoblock efficiently packages various formats while maintaining high operational efficiency. As a result, it offers versatility for different packaging needs.Power Supply and Energy ConsumptionThis Monoblock consumes 20 kW of power and operates at a voltage of 380V with a frequency of 50Hz. Furthermore, these energy requirements are standard for industrial machines of this class. Consequently, production facilities must ensure their electrical infrastructure can meet these demands to avoid any compatibility issues or operational disruptions. In addition, careful planning will help avoid unnecessary delays in production.Year of Manufacture and Operating ConditionsGaldi manufactured the Used Filling Monoblock GALDI RG50 up to 3000 bph in 2005. Although the machine has logged 22,506 hours of production, after receiving full servicing in 2019, it remains fully operational. Therefore, the machine is currently in storage and is available for sale in “as is” condition. Additionally, its recent maintenance ensures smooth operation, increasing its value.Dimensions and WeightThe machine measures 4.70 meters in length, 2.45 meters in width, and 2.85 meters in height, with a total weight of 2500 kg. Consequently, these compact dimensions allow for easy integration into existing production layouts. Hence, production teams must ensure there is sufficient space for installation and future maintenance access. Ultimately, proper planning of the workspace guarantees seamless installation.Compatible ProductsThe Used Filling Monoblock GALDI RG50 up to 3000 bph processes fresh liquid products like milk, cream, and juices. Its technology, therefore, maintains the quality of sensitive products, preserving their organoleptic properties throughout the bottling process. Therefore, operators must ensure the products meet the machine’s specifications to avoid any issues in quality or disruptions in production. Moreover, adhering to these requirements helps maintain a smooth operation.Conclusion of the Used Monoblock GALDIIn summary, the Used Filling Monoblock GALDI RG50 up to 3000 bph offers a reliable and versatile solution for plants bottling fresh liquid products. Its ability to handle multiple carton formats and its well-maintained condition make it a cost-effective choice for those looking for an efficient used machine. Additionally, with proper installation and configuration, the machine will optimize production and maximize bottling efficiency.

Condition: excellent (used), Year of construction: 2000, - Year of manufacture: 2000 - Membrane: 2024 - With 2 large filling doors - With central filling system - With large juice collection tank - With foot extensions, height 200 mm - Last used: Harvest 2025 - Machine in very good condition Dimensions: - Length: approx. 4,700 mm Fgodszc H Swspfx Agxei - Width: approx. 1,900 mm - Height: approx. 2,000 mm

Condition: used, Year of construction: 2002, machine/vehicle number: M353, Used Linker 36-36-12 filling monoblockTechnical Specifications & Performance DataThe Linker 36-36-12 Rinsing, filling and capping monoblock is an industrial packaging machine designed for volumetric filling and plastic screw-cap application. Manufactured in 2002, this unit combines filling and capping functions in one compact bottling equipment platform for efficient beverage production and low-viscosity liquid handling.Production speed: 140 units/min based on 500 cc presentations (8.400 units/hour based on 500ml)Rinsing grippers: 36Filling valves: 36Capping heads: 12Compatible formats: 0.25L to 1.0L, with format changeovers for additional presentationsContainer handling: PET, PP and HDPE containers with plastic capsDimensions: 6000 mm length, 6000 mm width and 3600 mm heightWeight: 3500 kgAdvanced Automation & Control SystemsThe monoblock is equipped with an Allen-Bradley MicroLogix 1500 PLC and an Allen-Bradley PanelView Plus 600 HMI. Control panels, instrumentation and operator-interface components support coordinated operation of the filling and capping stations. Fixed filling nozzles and a volumetric precision filling system provide a consistent process arrangement for the configured product range.The electrical supply requirement is 460 V AC, 3-phase, at 60 Hz, with stated power consumption of 6.4 kVA.Production Line Integration CapabilitiesThis Filling and Capping Monoblock can operate as the core process machine within a used bottling line, positioned after container supply and rinsing operations and before downstream labeling, inspection and secondary packaging machinery. It includes a PACE 5286 bottle feeder/organizer to support orderly container infeed.Its format range and changeover capability make the machine suitable for production environments handling multiple 0.25L to 1.0L container presentations. Compatibility with CIP cleaning systems supports integration into industrial packaging installations where hygienic product-contact cleaning procedures are required.Machine Condition & Maintenance HistoryThe machine is in production. Manuals, maintenance documentation and P&ID documentation are available, supporting technical review, installation planning and ongoing maintenance activities. The machine is configured as a second hand filling monoblock with documented controls, instrumentation and operating equipment.Operational Performance & VersatilityThe Linker monoblock is configured for edible vegetable oil and is also compatible with water, juice, CSD, vinegar and other low-viscosity liquid products. Its 36 gripper rinser, 36-valve volumetric filler uses fixed nozzles, while the integrated 12-head capper applies 28 mm plastic screw caps.The machine has aseptic capability and is designed for PET, PP and HDPE container handling. This flexibility supports beverage production and food-liquid packaging applications requiring filling and closure operations in a single machine platform.Installation Requirements & Site PreparationInstallation planning should allow for the machine footprint of 6000 mm... Fedpfjz E Dggjx Agxogi

Year of construction: 2026, condition: new, Pasteurizer-Filler Rocket is used for the pasteurization of juice and other liquid products and filling it to bottles or Bag in Box packaging. The machine has a built-in heating boiler. Inside of it there is a tubular heating spiral made from stainless steel. The liquid comes into the tubular spiral which is surrounded by hot water. The heat from the water heats up the liquid and eliminates the bacteria. If the boiler temperature rises more than set, an automatic temperature sensor turns off the heaters. Juice temperature is monitored manually. Capacity: 150 – 200 l/h Fedjq Nlz Tjpfx Agxegi Maximum heating temperature – 90 ºC. -A tubular spiral made of hygienic thin-walled stainless steel. -Spiral is integrated into the boiler which provides saving of space and prevention of heat loss when pumping the water into external heat exchanger. This saves the heating energy up to 15-20%. -Pasteurizer has an automatic water temperature control with a digital thermostat. -Safety sensors for dry run protection. Pasteurizer does not start until the water level is correct. -Easily interchangeable filling heads to Bag in Box or bottle. -Bag in Box filling table with scales for weight monitoring. -Bag in Box closing handle is moved by a spring – this ease the opening and closing process. -Automatic bottle filling – filling will stop when bottle is full. -Bottle filling table is adjustable according to bottle dimensions. -Manual juice temperature monitoring by digital thermometer. -Fast and easy cleaning.

Condition: used, water tank capacity: 20,350 l, Stainless steel tank made of V2A, upright, wine tank/fruit juice tank Rieger - used - Volume approx. 20,350 liters Diameter approx. 2,000 mm Cylindrical height approx. 6,000 mm Overall height approx. 7,400 mm Outer surface: marbled Inner surface: 2B = IIIC polished Top: Dished end 2 lifting lugs Threaded welding boss, central, DN 100 to DN 40 with threaded socket DN 50 with fermentation lock valve DN 50 and check valve DN 50 Sprinkler ring Tank cylinder: Level indicator with bar, scale, and standpipe valve DN 15 Manhole 420x320 mm Sampling tap DN 15 1 ladder hook at the top Immersion sleeve for temperature indicator CIP line drawn downwards with venting line DN 40 with connecting thread DN 50 Clear drain with angled seat valve DN 50 Cooling line 3 x cooling plates (horizontal in the tank) CIP ball Bottom: Fodpfx Aswlg Hnegxsgi Dished end Bottom rib drawn forward with angled seat valve DN 50, flush with the tank wall Outlet drawn forward with disc valve/ball valve/angled seat valve, outlet pipe DN 50 with flange 4 dome feet, height-adjustable, with washers If desired, the cooling plates in the tanks can also be removed. Otherwise, as per the photos.

Condition: like new (used), CFT Master RS 32/40/6 Automatic Triblock – Rinsing + Filling + Capping Machine AROL The CFT Master RS 32/40/6 automatic triblock is designed to integrate rinsing, filling, and capping operations for containers into a single machine within industrial beverage and liquid product lines. The equipment combines three synchronized rotary modules: a 32-position rinsing unit, a 40-valve filling unit, and a 6-head AROL capping unit, according to the 32/40/6 configuration indicated on the machine itself. This arrangement allows the entire process to be carried out, from the hygienic preparation of the empty container to its output filled and sealed, reducing transfers between independent machines. MAIN FEATURES -Manufacturer: CFT -Series / Model: Master RS -Configuration: 32/40/6 -Type: Automatic rinsing, filling, and capping triblock -Rotary rinsing unit: 32 positions -Rotary filling unit: 40 valves -Capping unit: AROL -Number of capping heads: 6 -Three operations integrated into a single monoblock -Automatic container feed -Synchronized transfer between modules -Internal rinsing of containers -Automatic continuous filling -Automatic cap feed and positioning -Automatic closing by AROL capping unit -Inlet and outlet transport system -Pressure instrumentation -Construction mainly in stainless steel -Enclosures and safety guards -Hygienic design for the food industry -Prepared for continuous industrial production PROCESS Empty containers automatically enter the CFT Master RS and are initially transferred to the 32-position rinsing unit, where the interior is cleaned before filling. Subsequently, they pass directly to the 40-valve filling carousel, where the product is dispensed continuously and in a synchronized manner. Once filled, the containers are transferred to the 6-head AROL capping unit, which is responsible for placing and sealing the cap. Finally, the containers automatically exit to the next stages of the line. It can be integrated with: -Depalletizers -Container conveyors -Product preparation and treatment systems -Cap feeders and orienters -Level and closure inspectors -Labeling machines -Coders -Cartoning machines -Palletizers APPLICATIONS Particularly suitable for beverage, juice, and other packaged liquid product manufacturers who need to centralize rinsing, filling, and capping operations in a single automatic unit. Container formats, product type, the exact filling system, cap type, and production capacity will depend on the configuration and tooling currently installed. The CFT Master RS 32/40/6 configuration with an AROL capping unit provides a compact solution to automate three of the main operations in a packaging line. Fgedpfsx S Ix Sjx Agxsi Machine available for inspection. Additional technical information, container formats, production speed, filling type, dimensions, additional photographs, or videos can be provided upon request.

Condition: good (used), Kecol Maxiprime 800 drum pump Stainless, pneumatically operated, 130L per min, up to 12mm solids, previously used for pumping fruit juices out of tote bins Fgedsu S Rkgspfx Agxoi

Condition: used, Year of construction: 2004, machine/vehicle number: PST31, Used FISCHER Complete Skid-Mounted Pasteurization & Cooling LineTechnical Specifications & Performance DataThis skid-mounted plate heat exchanger pasteurizer is engineered for high-throughput thermal processing with integrated cooling and CIP functionality. Manufactured by FISCHER engineering and built on a stainless steel skid, it offers rapid deployment and reliable performance for beverage production and industrial packaging environments.Type: Plate heat exchanger pasteurizer (EUROCAL series)Model: EUROCAL 18CFGThroughput: 6,000 L/hSections: 4-section plate pack for heating, regeneration, and coolingDesign pressure (PS): 6 barManufacturing year: 2004Construction: High-grade stainless steel skid and process contact partsChiller module: Air-cooled heat-pump type (Cooling 30.0 kW; Heating 32.0 kW; Refrigerant R407C)Advanced Automation & Control SystemsThe pasteurizer features centralized automation for precise thermal profiles and repeatable product quality across shifts.Control panel: Central stainless steel electrical cabinet with PLC and touchscreen HMIInstrumentation: Pressure gauges, flow control, and temperature sensors for closed-loop regulationProcess analytics: Inline quality monitoring to supervise key product parameters in real timeCIP automation: Pneumatic valve islands and control heads orchestrating automated cleaning cyclesProduction Line Integration CapabilitiesDesigned to integrate seamlessly upstream of filling, this second hand thermal processing unit connects easily to existing utilities and can be paired with a used bottling line or new production line layouts.Inline/standalone: Operates as a standalone pasteurization and cooling skid or inline within a complete packaging machinery lineFormat flexibility: Suitable for multiple liquid products prior to filling in PET, glass, or other containersQuick connection: Skid piping and utility stubs facilitate fast commissioning and changeoversMachine Condition & Maintenance HistoryProfessionally maintained and presented in ready-for-operation condition, this equipment supports immediate relocation and rapid start-up for beverage production or food processing facilities.Status: Ready for immediate operationUpkeep: Well-maintained, industrial-grade components designed for continuous dutyOperational Performance & VersatilityIdeal for high-quality thermal treatment with efficient energy recovery, ensuring consistent pasteurization while protecting sensory attributes.Applications: Milk pasteurization, fruit juice processing, syrup handling, and brewery wort coolingEnergy efficiency: Regeneration section increases thermal efficiency and reduces utility loadQuality assurance: I... Fgsdpfjy Ai Hljx Agxoi

Condition: used, Year of construction: 2006, machine/vehicle number: PST18, Tecnoindustria Used Pasteurizer Completely OverhauledTecnoindustria-brand mesh-belt pasteurizer, constructed entirely of stainless steel with a square-mesh stainless steel belt. Includes water recirculation tanks with associated pumps, an infeed and outfeed conveyor for jars or crates, a blower system for drying jars or crates, a steam modulation unit, a heat exchanger, all necessary connecting piping, and all other accessories required for operation.The machine has been completely overhauled.It is made up of two sectors of which: first sector useful length 11450 mm second sector useful length 7350 mm overall dimensions: Total length 18.70 meters without ribbons Useful belt length axis by axis: 18.45 m Useful net width 2.00 m. Overall width of the machine body 2.36 m Overall width including trays 2.36 m + 0.65 m total 3.01 m Total useful area of the machine sq.m. 36.90 Height 1400Features by sectionSterilization length: mm. 7,700 useful Pre-cooling length: mm. 3,300 useful Length of warm water cooling + cooling: mm. 7,000 useful Fjdsvguhkepfx Agxsgi Height mm 1400 Single track entry belt width: mm 200 Length: mm 3200 Single lane outfeed belt with Intralox belt width: mm 400 length: mm 3700 usefulTecnoindustria Used Pasteurizer Completely Overhauled, The machine is totally overhauled, in excellent condition.It is necessary to build the electrical panel, this is missing in this equipment. Its construction is therefore carried out and created with the customer’s specifications, adapting the pasteurization areas to the production needs. Its speed on the 65 diameter is approximately 18,000 pieces per hour, speaking of cylindrical containers. This used tunnel pasteurizer is ideal for both tomato preserve jars and for tinplate and aluminum cans. Both fruit juices and soft drinks and even tomato puree can be pasteurized.The used tunnel pasteurizer has already been overhauled and is ready to be purchased and delivered to the end customer, we will follow all the issues related to its loading on trucks or containers included in the price.

Condition: used, Year of construction: 1983, - Closed press drum, steel, coated - Tank capacity: 30 hl - Last used: Harvest 2025 - Membrane: PVC, year 2018 - Juice pan: large stainless steel pan, "drawer with suspension" version, connection DIN - DN50 - Central filling - Without feet, with wheels - Machine in operational condition Dimensions: - Length: 4500 mm - Width: 1900 mm Fgsdpfoy Nmc Dex Agxei - Height: 1600 mm (without wheels)