Used International 1586 for sale (10,225)

Condition: used, Comprehensively tested, used WINKWORTH model RT80 stainless steel jacketed high speed mixer. Manufacturer: Winkworth Model: RT80 Material: Stainless Steel Capacity: 120 litre, working capacity 80 litre Fpedpfxoxt Ei Ij Ad Nep Agitation: Shaft equipped with 4 mixing blades driven by 7.5 kw, Hp 10, Rpm 30/150, 380 volt motor. Stainless steel chopper driven by 5.7/4.7 kW, 50Hz, 2900/1450 rpm, 380-415 V Also includes: Stainless steel jacket rated 3.5 bar at 200 DegC, 2000 watt hot water heating skid. Local controls. Specifications: Bowl Volume: 31.7 gal Motor Power: 7.5 kW Material Of Construction: Stainless Steel Choppers (Y/N): Y Number Of Choppers (1-10): 1 Horsepower Of Choppers: 4.7 - 5.7 kW RPM Of Choppers: 1450 - 2900 HP Of Unit: 7.5kW Revolutions Per Minute: 30 - 150 Vacuum Internal (Y/N): N Jacket (Y/N): Y Jacket Pressure: 3.5 Bar Jacket Temperature: 200 Deg.C.

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: RLX10110, MACHINE SPECIFICATION Height of centres 240mm Distance between centres 1250mm Maximum cutting length 1080mm Swing over bed 480mm Swing over cross slide 257mm Swing in gap 700mm Gap width from faceplate 170mm Cross slide travel 230mm Spindle bore 80mm Spindle nose Camlock D1-8 Spindle speeds 25 to 2500rpm Main motor 7.5kW Tailstock quill travel 160mm Fodjxt E Nnepfx Ad Njpp Tailstock quill taper No. 5 MT Approximate weight 2950Kg Dimensions W x D x H 2600mm x 1460mm x 1810mm MACHINE EQUIPPED WITH Prototrak RLX CNC control TRAKing Auxiliary output 3 jaw chuck Quick change toolpost and toolholders Enclosed guarding Coolant system Lighting

Condition: like new (used), Year of construction: 2013, operating hours: 39,945 h, functionality: fully functional, travel distance X-axis: 450 mm, travel distance Y-axis: 580 mm, travel distance Z-axis: 400 mm, controller manufacturer: Heidenhain iTNC 530, total height: 2,900 mm, total length: 5,500 mm, total width: 2,650 mm, spindle speed (min.): 28,000 rpm, coolant supply: 40 bar, Year of construction: 2013 CNC controller: Heidenhain iTNC 530 Axes X-axis travel mm: 450 Y-axis travel mm: 580 Z-axis travel mm: 400 C-axis degrees: 360º (0,0001) A-axis degrees: +10 / -110º Feed rates m/min: 80 Rapid traverse m/min: 80 Acceleration in the axes m/s2: 13 Milling/turning table nc: Number of pallets: System 3R (21 pallets type GPS 240, 30pallets type GPS 120 and 24 pallets type ITS50) Table dimensions mm: baseplate for root pallet Maximum workpiece size (D x H) mm: for pallet GPS 240 (275x275x200mm); for pallet GPS 120 (150x150x200mm) and for pallet ITS50 (ø70x200mm) Max. workpiece weight kg: 150 (pallet + workpiece) Spindle Spindle speed rpm: 28000 Spindle drive power kW: 35/25 (40%ED/cont) Cooling Cooling through the Spindle Center bar: 40 Tank capacity: 600 Tool system Tool holder: HSK-A 63 Tool magazine slots: 120 Tool changer: Double gripper Equipment Electronic Handwheel Chip conveyor Infrared probe Internal cooling lubricant supply Rotating inspection windows Rinsing gun blowing air through spindle center selectable via M-function Laser tool measurement for measuring tool length and diameter 3D quickSET Arrangement for external pallet management Accuracy package Internal coolant supply Electrical cabinet active cooling unit Spindle active cooling unit Toolholders are not included Tools are not included Paper band filter Fpsdpfx Aoxv Av Rsd Nop Machine running times Under power: 62983 Spindle Working: 39945 Rated power kVA: 60 Basic machine dimensions / weight Length mm: 5500 Width mm: 2650 Height mm: 2900 Weight kg: 9500 + system 3R

Condition: excellent (used), Weiss Model: WKL 34/40 Weiss Climate Chamber, Air-Cooled -40°C to 150°C Chamber volume: 34 litres Feedthroughs included as standard: R1 NW 50 mm L1 NW 120 mm Internal dimensions: Height 310 mm, Width 324 mm, Depth 300 mm External dimensions: Height 1740 mm, Width 630 mm, Depth 970 mm Specifications for temperature testing: Temperature range: -40 to +150 °C Temperature deviations at steady state (according to IEC 60068-3-5): Temporal fluctuation in centre of usable space: ± 0.3 to ± 1 K, ± 1 to ± 2 K Spatial deviation (temperature gradient): 2 to 4 K Rate of temperature change (according to IEC 60068-3-5): Heating: 2.5 K/min Cooling: 3.5 K/min Max. heat compensation: 800 W Specifications for climate testing: Temperature range: +10 to +95 °C Humidity range: 10 to 98 % RH Temperature and humidity fluctuations (at steady state, according to IEC 60068-3-5): Temperature fluctuation (temporal, centre of usable space): ± 0.3 to ± 0.5 K Spatial temperature deviation: ± 0.5 to ± 1.5 K (temperature gradient): 1 to 3 K Humidity fluctuation (temporal, centre of usable space): ± 3 to ± 5 % RH Operating data: Test chamber lighting: Halogen bulb 12V, 20W Rated voltage: 1/N / PE AC 230 V ± 10 %, 50 Hz Rated power: 1.8 kW Rated current: 8.0 A Protection (on site): 16A slow-blow Heat output (air-cooled test chambers): Max. heat emission to environment: 800 W Fsdpfx Adexvpp Re Nepp Refrigerant: R-404A Weight: 110 kg Important notice: “The table shown in the photos is not included in the sale.” For your safety as a buyer, please note the following: The following procedures are carried out in advance on all chambers we offer: 1. Functional check and replacement of necessary components 2. Refill with legally compliant refrigerant if necessary 3. Leak test with certificate 4. After successful inspection, the chamber undergoes a documented test run. Condition: used Scope of delivery: (see photo) (Technical data and specifications subject to change and error!) If you have any further questions, we will gladly answer them by phone.

Condition: new, BRAND NEW T-TYPE FLOOR TYPE MILLING MACHINE HEIDENHAIN TNC 640 CNC Control HEIDENHAIN Package (motors, measuring systems, and handwheel) Fsdpfx Adjq I Nkbo Nopp X-axis: 4,000 mm Z-axis: 1,500 mm Y-axis (cross-ram): 1,300 mm V-axis (cross-column): 1,000 mm Rotary table (C-axis): 2,000 x 2,000 mm Max. load capacity up to 15,000 kg Automatic universal swivel head 1° x 1° (optional with fixed quill Ø 210mm) Spindle taper: SK50 DIN 69871/A Spindle speed: 6,000 rpm (oil-cooled) Maximum spindle motor power: 53 kW ICS - internal coolant supply - 36 bar Rapid traverse X, Y, V, Z: 30 m/min Positioning accuracy: 0.020 mm Repeatability: 0.010 mm ATC - Tool changer: 60-station (vertical/horizontal change) Double hinged belt chip conveyor (longitudinal) Perimetric enclosure (open top) Only inquiries from Germany will be answered.

Condition: good (used), Included in delivery: 01x storage bin, used Fodpfx Adjw E E Hgj Nopp Manufacturer: Bito External dimensions: 600 x 400 x 170 mm Internal dimensions: 560 x 360 x 167 mm Opening: front half open, 275 x 82 mm (W x H) Handle: yes, one-sided, open Colour: red Weight / piece: 1.57 kg General information about the item: This item is available for collection only. If transport or shipping is required, additional costs will apply. These costs can be provided separately depending on the delivery location and volume.

Condition: like new (used), Year of construction: 2020, operating hours: 37 h, load capacity: 1,300 kg, fuel type: electric, empty load weight: 200 kg, mileage: 37 km, Electric BREEDGAOOR pallet truck from the Jungheinrich brand from 2020 is as good as new; ONLY 37 hours on the clock; Very compact and weighs only 200 kg; Forks BLOCK pallet format; Capacity is 1,300 kg; Equipped with a LION battery with INTERNAL charger; Order the pallet truck in our webshop or make an appointment for a test drive Fedpfxjwv Hlrs Ad Nspp

Condition: used, Year of construction: 1985, functionality: fully functional, machine/vehicle number: 9/0002A/00053, SPECIFICATION Centre height 315mm Distance between centres 1500mm Swing over bed 635mm Swing over cross slide 390mm Spindle bore (max. bar dia) 115mm Spindle nose mounting D1-11 Camlock Taper in spindle nose and tailstock barrel No. 6 Morse Swing in gap 900mm Width of bedways 480mm Total travel of cross slide 380mm Total travel of top slide over bedways 165mm Total travel of tailstock barrel 190mm Spindle speeds (24) 6.3 – 1250rpm Drive vee belt and clutches Spindle motor 15kW Whitworth threads (88) ¼ - 112TPI Diametral threads (41) 1-60DP Metric pitches (70) 0.2 – 112mm Fpsdpfx Asxtnvqed Nop Module pitches (37) 0.3 – 24 MOD Machine in Metric execution   MACHINE EQUIPPED WITH Sino 2 axis DRO system 3 jaw chuck Quick change toolpost and 3 off toolholders High speed threading unit Bedstop Rotating centre Stationary steady Rapid power traverse to saddle Lighting Coolant system Chuck guard

Condition: like new (used), Year of construction: 2000, operating hours: 33,831 h, travel distance X-axis: 1,250 mm, travel distance Y-axis: 880 mm, travel distance Z-axis: 800 mm, controller model: '3D contouring control Millplus, workpiece weight (max.): 1,000 kg, total length: 7,000 mm, total width: 3,500 mm, overall weight: 3,902 kg, spindle speed (min.): 18,000 rpm, spindle motor power: 15,000 W, Year of construction: 2000 CNC controller: '3D contouring control Millplus Axes X-axis travel mm: 1250 Y-axis travel mm: 880 Z-axis travel mm: 800 C-axis degrees: 360º (0,001) Feed rates m/min: 40 Rapid traverse m/min: 40 Milling/turning table nc: Number of pallets: 1 Table dimensions mm: Ø1000 Fpjdpfx Aoxvrbied Njp Max. workpiece weight kg: 1000 max. torque Nm: 7900 Spindle Spindle speed rpm: 18000 Spindle drive power kW: 15/10 (40%ED/cont) Cooling Tank capacity: 600 Tool system Tool holder: CAT 40 Tool magazine slots: 60 Tool changer: Doeble gripper Equipment Electronic Handwheel Chip conveyor Internal cooling lubricant supply Rotating inspection windows Rinsing gun Preapared for RENISHAW sonde Accuracy package Ready for internal cooling (40/80 bar) Paper band filter Machine running times Under power: 33831 Spindle Working: 6328 Rated power kVA: 55 Basic machine dimensions / weight Length mm: 7000 Width mm: 3500 Height mm: 3902

Condition: ready for operation (used), chuck outer diameter: 700 mm, total height: 3,415 mm, controller model: Siemens 840D Solution Line, empty load weight: 17,000 kg, Type: Ultrix 800 RT Fedpfsxtgkaox Ad Njpp The Ultrix 800 RT is a multifunction machining center with 5 interpolated axes and a moving gantry for high-speed milling, turning, grinding, drilling, tapping, finishing, deburring, and roughing of complex parts. When used for turning vertical lathe: - swivel range: 1100 mm - maximum weight of the workpiece: 700 kg - 40/30 kW on the table - max. torque on the table: 1500 Nm - maximum speed of the table: 1000 rpm !! - hydraulic clamping on table - tool taper for turning: KM63 - 150-position tool changer with 24 tool positions for turning When used for milling, grinding, drilling, ... machining center: - X-axis: 800 mm - Y-axis: 900 mm - Z-axis: 600 mm - A-axis: -30° / 110° - C-axis: continuous - maximum weight of the workpiece: 700 kg - 55/40 kW on spindle - max. torque on the spindle: 22 Nm - max 40,000 rpm - tool taper for milling: HSK-E40 - 150-position tool changer with 126 tool positions for milling, grinding, drilling List of options mounted on the machine: 1 - 40,000 rpm high-speed spindle 2 - table dia 700 mm with hydraulic clamping 3-150-position tool changer 4 - chip conveyor belt 5 - cooling system with recovery 6 - coolant temperature control 7 - high pressure cooling (40 to 70 bar) by spindle 8 - smoke extraction system 9 - chip collection box 10 - Presetting system and tool integrity: laser and mechanical probe for measuring tools 11 - Renishaw probe Max turningdia -- passage: 1100 mm Power on the spindle: 40/30 kW Long: 4655 mm Wide: 5890 mm Turret: yes Qty Tools: 150 positions Coolant pump: yes

Condition: new, FACTORY-NEW MACHINING CENTER HEIDENHAIN TNC 7 digital path control HEIDENHAIN package (motors, measuring systems, and handwheel) Fpsdpfx Aohy Artod Njp X-axis: 650 mm Y-axis: 700 mm Z-axis: 645 mm Table diameter: 410 mm Maximum workpiece diameter: 500 mm Maximum spindle speed: 12,000 rpm (oil-cooled with MQL) Spindle taper: SK 40-BIG PLUS (BVD 40) Maximum spindle motor power: 17 kW ICS – internal coolant supply – 20 bar Rapid traverse X, Y & Z: 30,000 mm/min Positioning accuracy: ± 0.005 mm Repeatability: ± 0.003 mm ATC – automatic tool changer with double gripper: 30 stations (expandable up to 80 tools optional) Hinged belt chip conveyor Full enclosure Only inquiries from Germany will be answered / Only inquiries from Germany will be processed.

Condition: good (used), Included in the scope of delivery: 01x open front storage bin, used Manufacturer: Bito Fedpjw E D Iiofx Ad Njpp External dimensions: 600 x 400 x 170 mm Internal dimensions: 560 x 360 x 167 mm Opening dimension: front half-side open, 275 x 82 mm (W x H) Handle: yes, one-sided, open Colour: blue Weight per unit: 1.59 kg General information about the item: This item is offered for collection only. Any additional transport or shipping of this item will incur extra charges, which can be requested from us depending on the delivery location and delivery scope.

Condition: refurbished (used), Year of construction: 2003, Table size: 400x400 mm• 2 pallets• Pallet change time: 10 sec• Maximum table load: 500 kg• Working diameter: 630 mm• X axis: 560 mm• Y axis: 560 mm• Z axis: 600 mm• Continuous B axis• CNC control: Fanuc 16 iMA• Spindle torque: 156 Nm• Spindle speed: 50–14,000 rpm• Spindle power: 22 kW• Rapid feed X/Y/Z: 84/84/94 m/min• Distance spindle center – pallet: 80–640 mm• Distance spindle nose – pallet center: 70–670 mm• Tool magazine capacity: 60• Tool holder: HSK-A 63• Max. tool weight: 8 kg• Max. tool diameter: 70/170 mm• Options: Linear scales X/Y/Z, scraper-type chip conveyor, internal coolant 50 bar through spindle, Knoll VRF connection Fodpou Rr Exofx Ad Nspp

Condition: good (used), Year of construction: 2005, functionality: fully functional, Technical details x-travel 1040 mm y-travel 600 mm z-travel 500 mm table surface area 1250 x 600 mm table load 600 kg tool taper SK 40 spindle turning speed range 1 - 8000 rpm max. torque on the spindle (S1/S6) 140/200 Nm feed range 40000 mm/min rapid power traverse in X-and Z direction 70 m/min rapid motion - y-axis 40 m/min spindle drive (100/40 % ED) 13/19 kW total power requirement 39 kVA weight of the machine ca. 8,9 t Operating hours 70278 Spindle hours 23335 Please note the enclosed geometry measurement report with the tool pull-in force measurement. Equipment: CNC control Heidenhain iTNC 530 Electronic handwheel Heidenhain HR 410 Motor spindle with increased torque Direct path measuring system in Y-Z axis Preparation for measuring probe 30-station tool changer, tool diameter 100/140 mm, length 300, weight 7 kg ROTOCLEAR Production package 2 Internal coolant supply through the spindle 20 bar Coolant system with paper belt filter Cooling device blown air through the spindle center selectable via M function Chip conveyor Bed flushing Fedpfow Hybusx Ad Njpp Linear drive in the X-axis Operating mode 4 Program check with extended manual intervention Machine documentation Transport dimensions: 4100 x 2500 x 3000 mm

Condition: ready for operation (used), Fanuc Robot + 3 Breton machining centers 5 axes Fjdpfx Aextgkgod Nspp Max longitudinal travel X-axe: 18 000 mm

Condition: new, Year of construction: 2025, travel distance X-axis: 1,620 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 640 mm, rapid traverse X-axis: 30,000 m/min, rapid traverse Y-axis: 30,000 m/min, rapid traverse Z-axis: 30,000 m/min, controller manufacturer: HEIDENHAIN, controller model: TNC 640, table width: 620 mm, table length: 1,700 mm, table load: 1,300 kg, overall weight: 12,000 kg, spindle speed (max.): 10,000 rpm, coolant supply: 20 bar, spindle nose: SK 40 BIG PLUS (BVD 40), number of slots in tool magazine: 30, tool length: 300 mm, tool diameter: 150 mm, tool weight: 8 g, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, BRAND NEW MACHINING CENTER Control and Drive System: HEIDENHAIN TNC 640 Digital Path Control HEIDENHAIN package (Motors, Measuring Systems, Handwheel) ICS: Internal Coolant Supply – 20 bar Fpjdowu Tcuspfx Ad Nop Additional Equipment: Preparation for 4th axis (rotary table) Full enclosure with side-mounted, fold-up inspection windows Accuracies: Positioning accuracy: ± 0.005 mm Repeatability: ± 0.003 mm Only inquiries from Germany will be answered // Nur Anfragen aus Deutschland werden bearbeitet

Condition: good (used), Scope of delivery includes: 01x stacking box, used External dimensions: 400 x 300 x 120 mm Internal dimensions: 360 x 260 x 117 mm Fodpsw E Ixrofx Ad Nepp Colour: similar to anthracite grey Weight: 0.62 kg per unit Notes: The material is food-safe and made of polypropylene (PP). General information about the item: This item is only offered for collection. Delivery or shipment of this item will incur additional costs, which can be quoted separately depending on the place of delivery and the scope of delivery.

Condition: good (used), Year of construction: 2018, functionality: fully functional, Technical details faceplate diameter 3500 mm swing diameter 3800 mm turning height 750 mm Control Siemens 840 D sl Additional information CNC vertical lathe with one turning spindle and two tool carriers on two cross slides The machine has been regularly serviced by the manufacturer and is in mint condition. Technical specifications: Max. swing diameter 3800 mm Max. working height 750 mm Slide travel X1 axis approx. 2800 mm Slide travel X2 axis approx. 3200 mm Slide travel Z axis 1000 mm Rapid traverse X/Z axis 32/20 m/min. Faceplate (turning spindle unit with motor spindle): Speed 100 rpm Torque 67,000 Nm at 40% duty cycle Drive power 200 kW at 100% duty cycle Load capacity (chuck, clamping jaws, and workpiece) 35,000 kg Tool carrier: Double tool holder, Capto C8 Fpedpfx Adoxqn Nre Njp For internal and external machining Speed range up to 6000 rpm. Torque approx. 120 Nm at 100% duty cycle Direct coolant supply to the tool holders Double tool holder with swivel axis For turning and drilling (MFU) in conjunction with a tool magazine Equipment: CNC control Siemens 840 D sl Chuck Röhm lever chuck KFG 3500/3/6/12 25-station tool magazine, left of the work area 41-station tool magazine, right of the work area Max. tool diameter 150 mm Max. tool weight 20 kg Tool length 400 mm Tool cleaning with air Chip conveyor Coolant system 6 bar, 80 l/min. Knoll paper belt filter High-pressure coolant pump 70 bar

Condition: ready for operation (used), controller manufacturer: Siemens, empty load weight: 55,000 kg, 2-koloms portaalfreesmachine tussen de kolommen: 2550 mm!! 5-assige freeskop koeling door spindel totaal vermogen: 90 kVa Longitudinal travel X-axe: 8000 mm Fpsdpfsv Sfkaox Ad Nop Cross travel Y-axe: 2500 mm Travel Z-axe: 800 mm Dimensions clamping space- table: 9000 x 2500 mm Max height workpiece: 1200 mm Power on spindle: 20 kW Power needed (KVA): 90 ACCESSORIES & TOOLING: toolchanger - 28 toolpositions

Condition: new, travel distance X-axis: 2,000 mm, travel distance Y-axis: 820 mm, travel distance Z-axis: 820 mm, rapid traverse X-axis: 20,000 m/min, rapid traverse Y-axis: 20,000 m/min, rapid traverse Z-axis: 20,000 m/min, controller manufacturer: HEIDENHAIN, controller model: TNC 7, table width: 800 mm, table length: 2,100 mm, table load: 2,000 kg, rotational speed (max.): 10,000 rpm, overall weight: 21,000 kg, coolant supply: 20 bar, spindle motor power: 30 W, spindle nose: SK 40 BIG PLUS (BVD 40), number of slots in tool magazine: 40, tool length: 300 mm, tool diameter: 150 mm, tool weight: 8 g, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, BRAND NEW MACHINING CENTRE HEIDENHAIN TNC 7 Basic HEIDENHAIN package (motors, measuring systems, and handwheel) IKZ: Internal coolant supply – 20 bar Fsdpfx Aefdxi Ued Nopp Additional equipment: Preparation for 4th axis (rotary table) Full enclosure with side-folding inspection windows Accuracies: Positioning accuracy: ±0.005 mm Repeat accuracy: ±0.003 mm Optionally, the L2000 machining centre can be equipped with an SK-50 spindle interface Only inquiries from Germany will be answered.

Condition: good (used), Technical Data for the Pallet Racking System: Racking System: META Rack Technical Details for Installation: Number of rack rows: 01 unit Length per rack row: 13,890 mm Number of bays per row: 06 units Scope of Delivery: - 07x Pallet rack uprights, used Material finish: Sendzimir galvanized Profile dimensions: P 90 x 65 x 1.50 mm Upright type: PN-15 Including transverse and diagonal braces, footplates Uprights are pre-assembled (bolted truss design) Height: 4,500 mm Depth: 1,100 mm - 36x Pallet racking beams, used Material finish: Orange Box profile: 95 x 50 mm Beam type: 95|55 Connector: 4-hook Clear span: 2,210 mm Max. load per pair of beams: 2,400 kg (with evenly distributed load) - 07x Upright protectors, used Material finish: hot-dip galvanized Overall height: approx. 970 mm Total width: approx. 98 mm Internal width: approx. 92 mm Total depth: approx. 40 mm Material thickness: approx. 3.00 mm Bore diameter: approx. 11 mm Number of bores: 04 units - 72x Safety pins, used Material finish: Sendzimir galvanized For securing the beams against accidental lifting Fpedpfxew T Sipo Ad Nop - 28x Anchor bolts, new Manufacturer: Hilti Model: HST2 M12x105/10 Material: carbon steel, galvanized Approved for cracked concrete - 14x Shims, used Finish: fully galvanized For leveling uprights on uneven floors - 01x Load capacity sign With specifications for bay and shelf loads, manufacturer, and order number Dimensions: 420 x 297 x 3 mm Your contact persons at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. Any requested transport or shipping of this item will incur additional costs, which can be requested separately from us depending on the place of delivery and scope of delivery.

Condition: new, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 1,500 mm, rapid traverse X-axis: 30,000 m/min, rapid traverse Y-axis: 30,000 m/min, rapid traverse Z-axis: 30,000 m/min, position of the milling head: Universal-Diagonal-Fräskopf, spindle speed (max.): 6,000 rpm, table width: 1,200 mm, table load: 6,000 kg, table length: 1,600 mm, torque: 1,178 Nm, power: 31 kW (42.15 HP), Equipment: rotational speed infinitely variable, BRAND NEW BED-TYPE MILLING MACHINE WITH ROTARY TABLE Control and Motors: HEIDENHAIN TNC 640 digital path control HEIDENHAIN package (motors, measuring systems, and handwheel) IKZ: Internal coolant supply – 36 bar Rotary Table: 1600 x 1200 mm – Dual-motor drive system Additional Equipment: ATC tool changer with double gripper, 40 positions Double hinged belt chip conveyor (longitudinal), one at the front and one at the rear Perimetric enclosure Accuracies: Fjdpfoff Hz Hex Ad Nepp Positioning accuracy: ± 0.015 mm Repeatability: ± 0.008 mm Only inquiries from Germany will be answered.

Condition: new, BRAND NEW MACHINE HEIDENHAIN TNC 640 digital path control HEIDENHAIN package (motors, measuring systems, and handwheel) X-axis: 3,000 mm Y-axis: 1,300 mm Z-axis: 1,500 mm Rotary table: 1,600 x 1,200 mm Maximum workpiece weight: 6,000 kg Fjdjq I Ncqopfx Ad Nopp Automatic universal diagonal swivel head 1° x 1° (optional with fixed ram Ø 210 mm) Spindle taper: SK-50 DIN 69871/A Max. spindle speed: 6,000 rpm (oil-cooled) Max. spindle motor power: 53 kW ICS – internal coolant supply – 36 bar Rapid traverse X,Y,Z: 30 m/min Positioning accuracy: 0.015 mm Repeatability: 0.010 mm ATC – tool changer: 40 positions (vertical / horizontal change) 2 x longitudinal hinge-type chip conveyors Perimeter enclosure (open top) Only inquiries from Germany will be answered.

Condition: new, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 1,500 mm, rapid traverse X-axis: 30,000 m/min, rapid traverse Y-axis: 30,000 m/min, rapid traverse Z-axis: 30,000 m/min, position of the milling head: Universal-Diagonal-Fräskopf, spindle speed (max.): 6,000 rpm, table width: 1,100 mm, table load: 10,000 kg, table length: 3,100 mm, torque: 1,178 Nm, power: 31 kW (42.15 HP), Equipment: rotational speed infinitely variable, FACTORY NEW BED MILLING MACHINE Control and Motors: Fpsdpfx Aeh Ekrtsd Njp HEIDENHAIN TNC 640 digital path control HEIDENHAIN package (motors, measuring systems, and handwheel) IKZ: Internal coolant supply, 36 bar Additional Equipment: ATC tool changer with double gripper, 24 positions Double hinge belt chip conveyor (longitudinal), one front and one rear 4th axis preparation (rotary table) Perimetric enclosure Accuracies: Positioning accuracy: ± 0.015 mm Repeatability: ± 0.008 mm Only inquiries from Germany will be answered.

Condition: new, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 800 mm, feed rate X-axis: 30,000 m/min, feed rate Y-axis: 30,000 m/min, feed rate Z-axis: 30,000 m/min, table length: 1,900 mm, table width: 1,100 mm, spindle speed (max.): 6,000 rpm, table load: 4,000 kg, position of the milling head: Vertikal, torque: 1,356 Nm, spindle nose: SK 50 - DIN 69871A, Equipment: rotational speed infinitely variable, BRAND NEW GANTRY MILLING MACHINE Control and Motors: HEIDENHAIN TNC 640 Digital Path Control HEIDENHAIN Package (motors, measuring systems, electronic handwheel) Spindle Performance: Fjdpeq Ixc Tofx Ad Nopp Maximum spindle motor power: 30 kW ICS: Internal coolant supply, 70 bar Additional Equipment: Tool changer with double gripper, 60 positions Dual worm conveyor (longitudinal) Hinged belt swarf conveyor (transversal) Preparation for 4th axis (rotary table) Full enclosure, closed at the top Accuracies: Positioning accuracy: ± 0.025 mm Repeatability: ± 0.020 mm Only inquiries from Germany will be answered.