Used Internal Grinding Device for sale (22,148)

Condition: good (used), Year of construction: 2014, spindle turning speed range 170 - 18000 U/min weight of the machine ca. 7,5 t dimensions of the machine ca. 5,00 x 4,00 x 2,20 m --> Control conversion (2014) to Siemens Sinumerik 840D Solutionline --> Overhaul of the new control system in 2016 --> Technical data Grinding diameter: 20 - 300 mm --> Oscillation diameter: 350 (500) mm --> Workpiece length: 300 (1300) mm --> Recommended grinding depth up to: 300 mm --> Grinding table stroke Z-axis (total): 650 (950) mm --> Resolution: 0.001 mm --> Rapid traverse: 12 m/min-1 --> Grinding stroke speed: 0 - 9.99 m/min-1 --> Feed rate: 0 - 99.99 m/min-1 --> Step feed value during reversal: 0 - 0.999 mm --> Grinding table stroke X-axis (total): 150 mm --> Resolution: 0.001 mm / Ø --> Rapid traverse: 5 m/min-1/R --> Grinding stroke speed: 0 - 5 m/min-1/R --> Feed rate: 0 - 99.99 m/min-1/R --> Step feed value during reversal: 0 - 0.999 mm / Ø --> Swivel capability of the workpiece headstock: --> B-axis: -32° (-23°) / +2° Pedpfx Ajw Intascvogi --> Resolution: 0.0001° (0.36") --> U-axis stroke (total): 300 mm --> Resolution: 0.001 mm / Ø --> Travel speed: 5 m/min-1 --> Centre height above workpiece table: 200 (300) mm --> Centre height above grinding table: 330 (430) mm --> Workpiece spindle passage: 50 (70) mm --> new in 1988

Condition: used, Year of construction: 2004, Lot consists of: (1) CNC Horizontal Double-Disc Surface Grinder Technical Details: grinding wheel diameter x width 762 x 220mm, MARPOSS E3 in-process measuring system, CNC FANUC 210i-MB, 400V 50Hz 97kW, weight approx. 13 tons Pgjdpfxsym Tuao Acvji

Condition: used, Year of construction: 2008, operating hours: 18,937 h, functionality: fully functional, machine/vehicle number: 67, STUDER S145cnc INTERNAL GRINDING MACHINE Series 65 Year of manufacture: Sep. 2008 Operating hours: 18,937 Price: €118,000 This is a service-recorded machine: it undergoes an annual maintenance check by STUDER, with all wear parts replaced as needed. The machine has been used exclusively for producing precision spindles, achieving tolerances up to max. 0.0003 mm. The machine operates with grinding oil. Initially used in single-shift operation, in the last two years it has been working two shifts. The machine is in use and available for inspection upon request. Pgjdpeyw Nuxefx Acvsi The machine is being sold due to new equipment acquisition. Extras: Spindle adapters and flanges available upon agreement. Specifications: • Swing diameter ..... 448 mm • Center height ..... 225 mm • Workhead (chuck spindle head) with roller bearings, mounting taper ISO50 – spindle nose Ø110 mm, spindle bore Ø50 mm • Machine bed made from Granitan S103 • Worktable swiveling range: +/-30° • Direct measuring system for X and Z axes • Touch-trigger probe Movomatic C25 (switching) • FANUC CNC control system 21i-TB • Portable control unit Studer PCU terminal with LCD display • Machine is currently in operation • Transport arrangements to be made by the buyer The machine is equipped with 4 spindles: one external spindle, two internal spindles, and one internal spindle with longitudinal positioner. RPM – one spindle: 60,000; two spindles: 42,000; one spindle: 5,000 Type: Fischer

Condition: good (used), Year of construction: 1995, functionality: fully functional, Technical details internal diameter 800 mm grinding depth 500 mm swing diameter 850 mm weight of the machine ca. 6,4 t Additional information Used internal cylindrical grinding machine with face grinding device in special design with enlarged swing diameter and extended, hydraulic transverse movement Reconstructed and modernized 1995 in the Glauchau manufacturer’s plant, put into operation 1996 1. TECHNICAL DATA 1.1 Working area Grinding diameter in the workpiece guard internal grinding, min./max. mm 30/630(800) External grinding, max. mm 800 Grinding depth, up to approx. mm 500 Table stroke mm 800 Workpiece diameter, max. mm 800 Swing diameter Podoyrnmzopfx Acvogi in workpiece protection, max. mm 800 Without workpiece protection, approx. mm 850 Distance from workpiece spindle head to grinding spindle carrier, max. mm 1225 Adjustment of the internal grinding device on the table, max. mm 545 1.2 Workpiece headstock Cross shift, max. mm 650 Cross adjustment via gear motor and positioning device with HEIDENHAIN digital position display Swivel, max. degrees 15 Workpiece spindle Speeds rpm 16/22/32/ 45/63/90/ 125/18/250 Load capacity, max 1000 Spindle head (with bayonet flange) DIN 55021 size 11 Machine accessories: 2-axis digital displays made by HEIDENHAIN Coolant system with magnetic separator Fixators (machine shoes) Various grinding wheels Diamond dresser Large face plate Internal and face grinding device Halogen machine lamp Machine documentation

Condition: excellent (used), Year of construction: 1977, functionality: fully functional, Equipment: 4 in one shovel, The machine is in excellent condition and can be inspected at our warehouse. Pgjdpfeyxypiox Acvsi

Condition: used, Year of construction: 1952, 220 mm ja Pgsdjyn R Nwepfx Acvji weight of the machine ca. 1,4 t

Condition: used, Year of construction: 2009, internal diameter max. 600 mm grinding depth max. 800 mm grinding length max. 600 mm control Siemens 840 D grinding diameter - internal max. 600 mm grinding diameter - cylindrical max. 800 mm workpiece length - max. 380 mm external grinding length max. 600 mm travel - x1 axis 150 mm travel - z1 axis 1100 mm travel - x2 axis 470 mm travel - z2 axis 800 mm workpiece spindle 8,5 kW turning speed range - stepless 1-795 U/min Equipment / Accessories: Workpiece spindle unit (U/B1/L adjustment): - Travel (U-axis): 300 mm - Swivel angle (B1 axis): -0,5°/+12° - Drive power of the workpiece spindle: 8.5 kW - Speed range (infinitely variable): 1-795 rpm - Set-up speed (jogging): 10 rpm - Spindle head size A 8 according to DIN 55026 - Through-hole 58.5 mm - Workpiece diameter max. 830 mm - Workpiece length (overhung clamping) max. 800 mm - Workpiece length (clamped between centers) max. 800 mm - Load capacity at spindle head max. 6100 N Internal grinding device (Z1/X1/B2): - Travel (Z1 axis): 1100 mm - Travel (X1 axis): 150 mm - Swivel angle (B2 axis): 270° - Manual longitudinal adjustment of internal grinding axis on table: 780 mm - Drive power of the internal grinding spindles (infinitely variable) Belt-driven grinding spindles: 7.5 kW - Grinding block mounting hole (diameter): 100 mm / 125 mm - Mounting length of sanding block: 220 mm - Sanding diameter: max. 600 mm - Sanding depth: max. 800 mm External and surface sanding device (Z2/X2): - Travel (Z2 axis): 800 mm Podpswp S Tnofx Acvogi - Travel distance (X2 axis): 470 mm - Swivel angle (B2 axis): 270° - Drive power of the external grinding spindles: 7.5 kW - Grinding block mounting hole: Ø 140 mm - Sanding diameter: max. 800 mm - Sanding length max. 600 mm - Grinding wheel dimensions: max. Ø 450 x 50 x Ø 127 mm

Condition: excellent (used), Year of construction: 1989, functionality: fully functional, 1 Internal and Surface Grinding Machine Manufacturer: WEMA Glauchau Model: SI 6/1 AS-Nx500 Year of manufacture: 1989 Grinding depth: 500 mm Workpiece spindle speed range: 40 – 400 rpm Distance from workpiece spindle flange to grinding spindle carrier: 1450 mm Podpfxeyn D Ime Acvogi Adjustment travel of internal grinding device: 530 mm Max. workpiece diameter: 500 mm Distance from workpiece spindle flange to steady rest: 280 – 650 mm Internal grinding diameter: 40 – 400 mm External grinding diameter: 400 mm Rapid traverse: 10 m/min Grinding feed rate: 0.1 – 8 m/min Machine weight: 6.5 t.

Condition: ready for operation (used), Year of construction: 1983, functionality: fully functional, machine/vehicle number: 8151, rotary table diameter: 800 mm, grinding height: 750 mm, workpiece weight (max.): 800 kg, total height: 4,100 mm, total width: 26,650 mm, total length: 44,000 mm, feed length Y-axis: 750 mm, feed length Z-axis: 550 mm, overall weight: 13,000 kg, grinding wheel diameter: 400 mm, disc diameter: 400 mm, grinding spindle speed: 1,460 rpm, grinding diameter: 800 mm, control cabinet width: 650 mm, type of input current: DC, control cabinet height: 1,900 mm, control cabinet length: 1,800 mm, spindle speed (max.): 1,800 rpm, spindle speed (min.): 1,460 rpm, table load: 900 kg, workpiece diameter (max.): 850 mm, grinding wheel width: 60 mm, table width: 1,240 mm, power: 35 kW (47.59 HP), rapid traverse X-axis: 2 m/min, rapid traverse Y-axis: 100 m/min, rapid traverse Z-axis: 2 m/min, space requirement height: 4,100 mm, space requirement length: 5,100 mm, space requirement width: 2,655 mm, Good day, For sale is a well-preserved and completely functional Sielemann cylindrical grinding machine for the following applications: surface grinding, internal grinding and external grinding. The machine has a swivel stand with 3 different sanding heads for the respective area of application. Complete machine documentation is available and can be presented upon inspection. The Sielemann offered here has always been serviced and maintained, most recently the components listed below were replaced: - 3x New weight compensation cylinders - 1x new hydraulic unit (complete) - New guideway covers - Revised rotary table group Technical data Machine length: 4.400mm Machine width: 2,655mm Machine height: 4.100mm Machine weight: 13.000Kg Control cabinet width: 650mm Control cabinet height: 1.900mm Control cabinet length: 1.800mm Grinding table diameter: 800mm Grinding table load capacity: 800kg Grinding table drive power: 0.21 - 14.5KW Grinding table speed: 100 1/min (both directions) Grinding table workpiece clamping: Magnetic clamping plate incl. T-slots Z-axis travel (grinding table): 550mm Maximum grinding height (Y): 750mm Lubrication pump Masch. Bed: 0,18KW Lubrication pump Masch. Column: 0,1KW Leak oil pump: 0,065KW Hydraulic pump: 1.5KW 1) External round grinding head Spindle drive power: 11KW Spindle speed: 1,450 1/min Grinding wheel: 400x50mm Cone grinding spindle mount: D=65mm Taper pitch: 1:5 Feed speed (Y): 100 mm/min 2) Internal round grinding head Spindle drive power: 5.5KW Grinding wheel: Variable Feed speed (Y): 100 mm/min 3) Flat-round sanding head Spindle drive power: 11KW Spindle speed: 1,800 1/min Grinding wheel: 400x50mm Cone grinding spindle mount: D=65mm Taper pitch: 1:5 Feed speed (Y): 100 mm/min Viewing appointments possible at short notice by arrangement !!! With kind regards Pgedpfsrntirex Acvsi R.Suckow / Managing Director UNITTOOL Werkzeugmaschinen GmbH 33758 Schloß Holte Stukenbrock Görlitzerstraße 9

Condition: excellent (used), grinding length: 500 mm, The machine is in good condition. Podex N A Agjpfx Acvegi

Condition: excellent (used), Year of construction: 1994, Description to follow! Pedpfx Acjyrtwrsvegi

Condition: excellent (used), Year of construction: 1985, Description to follow! Psdpfeyrtvzsx Acvogi

Condition: good (used), Year of construction: 1986, Inner diameter: 20…400 mm Grinding depth: 315 mm Internal grinding spindle speeds, stepless: 2,640…16,500 rpm Workpiece spindle speed: 40…400 rpm Table feed rate: 0.1…8 m/min Rapid traverse: 10 m/min Table travel: 630 mm Total power requirement: 16 kW Machine weight approx.: 5.8 t Additional information: Grindable diameter within workpiece guard: internal 20…400 mm; external 500 mm Max. workpiece diameter in workpiece guard: 500 mm Max. grinding depth: 315 mm Grindable taper angle: 60° Internal grinding spindle speeds: 2,640…16,500 rpm Drive power for face grinding attachment: 4 kW Drive power for workpiece motor: 1.5 kW Workpiece spindle speeds: 40…400 rpm Table speed: 0.1…8 m/min Rapid traverse: 10 m/min Pjdpfeyw Ib Dox Acvegi Table travel: 630 mm Max. distance from workpiece spindle flange to grinding spindle carrier: 1,250 mm

Condition: used, Year of construction: 1980, functionality: fully functional, machine/vehicle number: 052 249, grinding depth: 250 mm, center height: 260 mm, total width: 1,340 mm, total length: 3,455 mm, total height: 1,710 mm, spindle speed (min.): 3,600 rpm, spindle speed (max.): 40,000 rpm, grinding length: 1,000 mm, overall weight: 3,000 kg, rotational speed (max.): 40,000 rpm, rotational speed (min.): 3,600 rpm, grinding diameter: 200 mm, table speed: 10,000 mm/min, workpiece spindle speed (max.): 40,000 rpm, feed rate X-axis: 6 m/min, input voltage: 380 V, power: 15 kW (20.39 HP), The Voumard 5A LP1000 is a universally applicable internal and face grinding machine designed for high-precision grinding tasks in toolmaking, mechanical engineering, as well as single-part and small-batch production. Pgjdpfx Acoyvg Elevsi The machine enables internal, face, and plunge grinding, impressing with its robust construction, high accuracy, and versatile applications. Thanks to its automatic grinding cycles, it is suitable for both manual and semi-automatic operations. The specified price is exclusive of disassembly, packaging, and shipping. Sale from site, subject to prior sale. The machines are sold in used condition; any warranty and guarantee are excluded.

Condition: repair required (used), Year of construction: 2014, functionality: not functional, overall weight: 1,500 kg, for excavate machine without flywheel drive motor and frequenzy regulator Pgsdpfx Aexggc Nocvsi

Condition: excellent (used), Hydraulic with semiautomatic cycle Internal grinding diameter 5-200 mm Grinding depth 250 mm Workpiece spindle head center height 180 mm Spindle bore 50 mm Table travel -600 mm Misc. accessories Pgsdpfx Acsylbhxjvsi MARCELS MASCHINEN AG

Condition: good (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 018.0179.90.035, (Please tell us your offer price) Sale only within Europe, incl. Turkey Price without packaging; delivery condition: FCA (machine location) ===== Technical data see handout. All warranty rights are excluded. For the correctness of the technical data and year of construction, for the completeness of accessories and tool equipment, and for compliance with all safety and environmental protection requirements specified in the accident prevention regulations. No sale to private individuals. Sales only within Europe, incl. Turkey Price without packaging; Delivery condition: FCA (machine location) ===== Technical data please see handout in attachment. German text leading language. Without any guaranty and warranty, including completeness of tools & accessories as well as environmental and safety regulations. No private sales. Podpfsyh R Uwjx Acvsgi

Condition: excellent (used), max. width of grinding wheel 15 mm max. dia. of grinding wheel 110 mm max. module 0,4 - 8 pressure angle 15 - 25 ° turning speeds 2650 U/min total power requirement 0,4 kW weight of the machine ca. 0,02 t dimensions of the machine ca. 0,4 x 0,2 x 0,2 m For profiling grinding snails for tooth flank grinding machines. Finished and after-profile on the following models: NZA, AZA, RZ 300 E, RZ 301 S, Rz 362 A, Am, ... Adjustment plate on the right with micrometer screw adjustment axial Podpfxovf Riuj Acvjgi To bracket a diamond roll.

Condition: excellent (used), Year of construction: 1999, max. width of grinding wheel 15 mm max. dia. of grinding wheel 110 mm max. module 0,5 - 10 pressure angle 15 - 25 ° turning speeds 2800 U/min total power requirement 0,4 kW weight of the machine ca. 0,02 t dimensions of the machine ca. 0,4 x 0,2 x 0,2 m For profiling grinding snails for tooth flank grinding machines. Finished and after-profile on the following models: NZA, AZA, RZ 300 E, RZ 301 S, Rz 362 A, AM, ... Pjdpjvibc Hefx Acvogi Adjustment plate on the right with micrometer screw adjustment axial Radial adjustment plate with micrometer screw adjustment 2 precision motor spindles to absorb the diamond discs.

Condition: used, Year of construction: 1989, centre height 250 mm centre distance 600 mm Pgsdpfx Aoxzuzcjcvji Dimensions (L/W/H) 3600 x 1900 x 2100 mm weight of the machine ca. 2,25 t

Condition: excellent (used), Year of construction: 1975, functionality: fully functional, overall weight: 5,900 kg, power: 12.5 kW (17.00 HP), Type: Internal and surface grinding machine Manufacturer: GLAUCHAU Model: SIP 400x500 Year of manufacture: 1975 Condition: Well-preserved Control: Conventional Location: Soni Machines e.K. Country of origin: Germany Availability: Immediate Freight terms: Ex works Used GLACHAU SIP 400x500 internal and surface grinding machine TECHNICAL DETAILS Internal diameter: 800 mm Grinding depth: 500 mm Swing diameter: 850 mm Total power requirement: 12.5 kW Machine weight: 5,900 kg Installation dimensions: 4000 x 1780 x 2400 mm 1. TECHNICAL DATA Maximum workpiece weight: 1,000 kg Spindle head: DIN 55021 Equipment and accessories: - Coolant system with magnetic separator - Leveling pads (machine shoes) - Various grinding wheels Pjdoyl Tfiepfx Acvegi - Diamond dressing tool - Face grinding wheel - Internal and surface grinding attachment - Halogen machine lamp - Machine documentation

Year of construction: 2002, condition: refurbished (used), I offer on behalf of a customer and on his account a VOUMARD 150 CNC L 1300 for sale. The machine is equipped with: 4-fold turret 3 x inside, 1x empty space for outside pneumatic swivelling dresser diameter max 350 mm length max 1.300 mm CNC Fanuc 32 i very extensive accessories among others several hydr. steady rests, power chucks etc. View under "Documents Machine can be inspected under power at the owner's premises. The machine was overhauled in 2016 In addition, I offer 2 pieces of grinding spindles Voumard VMX 90 A, once new, once reconditioned. The can also be purchased seoerat Psdpfxjgigv De Acvogi

Condition: excellent (used), Year of construction: 1991, swing diameter 400 mm Q U O T A T I O N We are pleased to offer you ex our stock, subject to prior sale, and error in technical data : WMW - GLAUCHAU Hydraulic Internal Grinding Machine with Face Grinding Device model SI 6/1 AS-N x 315 year 1991 Internal grinding diameter 40 - 400 mm Internal Grinding depth, max. 315 mm Max. grindable External dia. 400 mm Weight of workpiece without steady, max. 630 kg Workpiece Swing Ø, with / without safety hood, max. 500 / 600 mm Height of centre above table 360 mm 16 step workpiece spindle speeds 40 – 400 rpm Workpiece spindle bore, approx. 53 mm Workpiece headstock swivelling max. 30 ° Adjustment of workpiece headstock position crosswise, max. 400 mm Pedpfx Aoxyllvecvogi Automatic cross traverse of grinding head 70 mm Adjustment of grinding head position on slide crosswise, approx. 100 mm Feed of grinding head, intemittendly 0.001 – 0.025 mm/stroke Feed of grinding head, continually 0,1 – 1 mm/min Table stroke, max. 630 mm Table speeds infinitely variable 0,1 – 8 m/min (10 m/min) Distance workpiece headstock and grinding slide, max. 1,250 mm Adjustment of Grinding spindel stock on table 520 mm Spindle drive, approx. 7.5 kW Total electrical load, approx. 17 kW - 380 V - 50 Hz Weight, approx. 6,000 kg Accessories / Special Features: • Universal internal grinding spindle head with automatic cycles to grind cylindrical and conical bores with one or multiple diameters, external diameters and grinding of narrow end-faces. • Face grinding device, hydraulic swivel-in, with automatic cycles to grind end-faces, multiple end-faces and two tiered end-faces simultaneously • Electronic cycle control with control tableau to set up all the grinding and dressing cycles including ampere-meters for internal grinding spindle and face grinding spindle • Belt-type grinding spindle drive with mounted grinding spindle and 5 pieces separate interchangeable grinding spindles along with various pulleys with various diameters. • Dressing device for both grinding spindles • HEIDENHAIN Digital Read-Out for the cross adjustment of the Workpiece headstock • A large amount of operating tooling and accessories as : 4-jaw Faceplate Ø approx. 520 mm, 3-jaw chuck Ø approx. 380 mm, 3-jaw-chuck Ø approx. 130 mm, pulleys, spindle sleeves, grinding flanges, foot switch, • Separate hydraulic unit, built on switch cabinet, coolant device with magnetic separator. Condition : very good, universal machine for all sorts of grinding tasks ! Please click here to view a video of the machine running : ! Delivery : immediately available, FCA Metzingen Payment : 100 % Net, after conclusion of contract, before loading

Year of construction: 1979, condition: ready for operation (used), Components: headstock, main spindle, faceplate flange, taper, table, guideway, longitudinal guide, cross guide, tailstock, workpiece holder, tailstock taper, workpiece spindle. With documentation and records. An on-site inspection is possible. Pjdpfx Acsyln Dtevegi

Condition: refurbished (used), Year of construction: 2026, functionality: fully functional, center height: 150 mm, total length: 620 mm, Mechanics: All wear parts of the machine are replaced, including the infeed spindle in the X-axis. All assemblies are restored to as-new condition. After the overhaul, the machine is comparable to a new machine. Geometry: The machine is completely dismantled down to the guides. Before the geometry of the individual tables and assemblies can be restored, both guides of the X and Z axes are scraped by hand and restored to as-new condition. After completion, the machine receives a measurement report in accordance with the manufacturer's specifications. Painting: Once the geometry of the machine has been restored, it is prepared for repainting. All housings, tables and the machine bed are stripped of old paint, cleaned and repainted. Hydraulics: The entire lubrication system, including the lubrication unit, is replaced. The hydraulic unit is also completely overhauled. Conventional internal cylindrical grinding machine TSCHUDIN HTG 610I Equipment of the machine: Technical data: Center height: 150 mm Pgsdpfxourw Uyj Acvei Center width: 680 mm Grinding length: 620 mm Weight and space requirement of the machine: 2500kg // 2340x1445x1900 mm Machine equipment (standard): 1 pc. Workpiece headstock MK5 1 pc. Control panel 1 pc. Holder for internal grinding spindle 1 pc. Speed control unit for belt spindle (UJ50 / UJ80) FISCHER 1 pc. Hydraulic unit Optional: - Digital measuring system 2-axis - Freely adjustable speed (1-800 rpm) incl. soft start (higher speeds are optionally possible after clarification of technical details) - Separate low speed for part alignment