Used Internal Grinding Attachment for sale (16,609)

Condition: good (used), Internal item no.: 25087 Dedpfx Ahjxtpbboujcp Cylindrical grinding machine Schaudt AR 500 + Magnetic chuck D160mm + Internal grinding attachment! Grinding length: max. 500mm Grinding diameter: max. 300mm Centre height: 150mm Centre distance: 500mm Tailstock taper: MK4 Machine dimensions (LxWxH): 2700 x 2000 x 1800mm Weight: approx. 2000kg

Condition: ready for operation (used), Year of construction: 2004, operating hours: 2,184 h, functionality: fully functional, machine/vehicle number: 2407-463, spindle speed (max.): 60,000 rpm, number of spindles: 3, swivel angle B-axis (min.): -90 °, swivel angle B-axis (max.): 15 °, TECHNICAL DETAILS Grinding spindle speeds Spindle 1: 60,000 rpm Spindle 2: 60,000 rpm Spindle 3: 45,000 rpm B-axis swivel range: -90°/+15° MACHINE DETAILS Spindle hours Spindle 1: 11,278 h Spindle 2: 2,184 h Spindle 3: 2,841 h Main counter: 45,144 h Djdjxtdfbopfx Ahuocp EQUIPMENT Touch probe (on 4th spindle position)

Condition: used, Year of construction: 1971, grinding depth: 150 mm, grinding diameter: 80 mm, inner diameter: 80 mm, Manufacturer: OVERBECK Model: 250 I Year of construction: 1971 Workpiece clamping diameter: max. 140 mm Clamping length: max. 150 mm Grindable bore length: 150 mm Bore diameter: max. 80 mm Surface grinding device can be swiveled in by hand Coolant tank with pump without grinding spindle and drive motor was last operated with compressed air spindle Weight: approx. 1400 kg Dcsdpfju Ef Dqex Ahusp

Condition: good (used), Year of construction: 1998, Make: Waldrich Coburg Dsdpfx Ahsxn Rvvsuocp Year: 1998 original CNC Control: Siemens 840-C Chuck dia: 4500 mm Turning dia: 5750 Turning height below tool post: 4600 mm Chuck motor: 100 KW Chuck speed: 0.56 to 71 rpm! Table load capacity: 80 Tonnes Hydrostatic chuck Ram travel vertical: 2500 mm Ram rapid vertical/horizontal axis: 10/16m/min Crossslide travel: 3000 mm With Grinding attachment

Condition: good (used), Internal Item No.: 25080 No VAT can be shown, as the item is subject to differential taxation. Internal cylindrical grinding machine Overbeck 250i Dcodpfx Ajxtndbjhuep + Operating manual + Three-jaw chuck (workpiece holder) + Collet set (workpiece holder) Technical data: Max. clamping diameter of workpiece: 140mm Max. clamping length of workpiece (in front of spindle flange): 250mm Grindable bore length: 160mm Grindable bore diameter: 0.8–90mm Max. workpiece weight: 15kg Swing diameter under guard: 150mm Workpiece spindle speed (stepless): 112–1000 rpm Swivel range of workpiece spindle headstock: 45° Internal taper of workpiece spindle: MT4 Spindle bore: 26mm Grinding spindle speed range: 6,000–175,000 rpm Incremental infeed: 0.001–0.01 mm Power requirement: 7.3 KVA Space required: 2.8 x 2.5m Weight: 1,750kg The machine comes from a training workshop in a rehabilitation clinic, and is in very well-maintained condition.

Condition: ready for operation (used), Year of construction: 2019, Control Unit Brand FANUC Model §==I Main Drive Number of axis 5 Table Number of tslots 7 Inner width 14 mm Table load 800 kg This 5-axis HAUSER KELLENBERGER H55-400 was manufactured in 2019, designed for precision internal grinding. Ideal for complex geometries, it offers advanced control for high accuracy. Consider the opportunity to buy this HAUSER KELLENBERGER H55-400 internal grinding machine. Contact us for more information. Application Types Dcodpexp Sq Rsfx Ahujp Grinding

Condition: excellent (used), Overbeck 250i Internal Grinder, S/N 26586 , New 1990. Heidenhain 2 Axes DRO, Coolant, hydraulic, Electrical cabinet. Dcsdpfx Asw U Tvyshusp

Condition: good (used), Year of construction: 1995, functionality: fully functional, Technical details internal diameter 800 mm grinding depth 500 mm swing diameter 850 mm weight of the machine ca. 6,4 t Additional information Used internal cylindrical grinding machine with face grinding device in special design with enlarged swing diameter and extended, hydraulic transverse movement Reconstructed and modernized 1995 in the Glauchau manufacturer’s plant, put into operation 1996 1. TECHNICAL DATA 1.1 Working area Grinding diameter in the workpiece guard internal grinding, min./max. mm 30/630(800) External grinding, max. mm 800 Grinding depth, up to approx. mm 500 Table stroke mm 800 Workpiece diameter, max. mm 800 Swing diameter in workpiece protection, max. mm 800 Without workpiece protection, approx. mm 850 Distance from workpiece spindle head to grinding spindle carrier, max. mm 1225 Adjustment of the internal grinding device on the table, max. mm 545 1.2 Workpiece headstock Cross shift, max. mm 650 Cross adjustment via gear motor and positioning device with HEIDENHAIN digital position display Swivel, max. degrees 15 Workpiece spindle Dcedoxfr Uuepfx Ahusp Speeds rpm 16/22/32/ 45/63/90/ 125/18/250 Load capacity, max 1000 Spindle head (with bayonet flange) DIN 55021 size 11 Machine accessories: 2-axis digital displays made by HEIDENHAIN Coolant system with magnetic separator Fixators (machine shoes) Various grinding wheels Diamond dresser Large face plate Internal and face grinding device Halogen machine lamp Machine documentation

Condition: used, External/Internal Cylindrical Grinding GENDRON RU 28.100 Between points: 1000 mm Maxi grinding diameter: Ø 290 mm Tool holder rotation: from 70 to 370 RPM 4-jaws Ø 200 mm chuck Dcjdpjxqqkljfx Ahusp Grinding wheel: Ø 300 mm Auto pass plug Swivel table External hydraulic group External lulbricant tank Voltage: 380 V Dimensions (L x W x H): 3000 x 1900 x 2000 mm Weight: approx 3 T

Condition: used, Year of construction: 1983, internal diameter min / max: 10 / 250 mm grinding depth 400 mm Dcedpfsvprxfex Ahuep external diameter max. 380 mm swing dia. 390 mm table travel max. 550 mm stroke of the table min. 2 mm rapid traverse 10 m/min table speed -stepless- 0 - 10 m/min rough adjustment 18 mm fine adjustment 4 mm max. workpiece weight 100 kg spindle head B 6 DIN 55021 spindle turning speed - stepless 15 - 1.500 U/min pivoting angle +/- 30 Grad spindle bore 50 mm power capacity 2 kW rapid traverse 0 - 250 mm/min stroke 70 mm power requirement 3 kW weight of the machine ca. 2,7 t dimensions of the machine ca. 3,0 x 3,0 x 3,2 m Internal Grinding Machine BAHMÜLLER - JES 12 - new control (July 2015)

Condition: ready for operation (used), Year of construction: 2002, cnc num machine rebuilt in 2002 front-end unit max. grinding diameter 200MM max. grinding stroke 200MM Djdpfot E N Dmex Ahuocp max passage diameter 500MM weight 4500KGS

Condition: repair required (used), Year of construction: 1988, functionality: fully functional, Technical Data Voumard 400 CNC (POSSIBILITY OF A COMPLETE RETROFIT) Minimum grinding diameter: 20 mm Maximum grinding diameter: 300 mm Maximum grinding depth: 300 mm Maximum workpiece and steady rest length: 1500 mm Centre height: 300 mm Axis travel: - Longitudinal travel (Z-axis): 650 mm - Cross travel (X-axis): 150 mm Workpiece spindle: max. 1000 rpm B-axis: +2° / -20°, manual adjustment on workpiece head B1-axis: CNC-controlled turret spindle change Maximum axis speed (Z – X): 12,000 mm/min Grinding head 1: Grinder motor power 7 kW, 15,000 rpm Grinding head 2: Grinder motor power 7.8 kW, 12,000 rpm Dcjdpfx Ahjxpf Ezoujp Machine weight: approx. 9,500 kg Machine dimensions: - Length: 5,000 mm - Width: 2,300 mm - Height: 2,400 mm New Siemens 840D SL control system

Condition: good (used), Made in Germany - min. bore: 6 mm Dedpjda A Eisfx Ahuscp - max. bore: 50 mm - max. grinding length: 80 mm - max. clamping diameter: 235 mm - distance spindle / table center: 145 mm - spindle speed: 640 und 1000 rpm - swivel angle from spindle to one side: 10° - max. table speed, hydraulic adjustable:: 12 m/min. - max. distance spindle / grinding device: 550 mm - power consumption: ca. 8 kW - weight: 2000 kg

Condition: good (used), Year of construction: 1988, spindle turning speed range 170 - 18000 U/min weight of the machine ca. 7,5 t dimensions of the machine ca. 5,00 x 4,00 x 2,20 m --> Control conversion (2014) to Siemens Sinumerik 840D Solutionline --> Overhaul of the new control system in 2016 --> Technical data Grinding diameter: 20 - 300 mm --> Oscillation diameter: 350 (500) mm Dcsdpfxjw Intae Ahujp --> Workpiece length: 300 (1300) mm --> Recommended grinding depth up to: 300 mm --> Grinding table stroke Z-axis (total): 650 (950) mm --> Resolution: 0.001 mm --> Rapid traverse: 12 m/min-1 --> Grinding stroke speed: 0 - 9.99 m/min-1 --> Feed rate: 0 - 99.99 m/min-1 --> Step feed value during reversal: 0 - 0.999 mm --> Grinding table stroke X-axis (total): 150 mm --> Resolution: 0.001 mm / Ø --> Rapid traverse: 5 m/min-1/R --> Grinding stroke speed: 0 - 5 m/min-1/R --> Feed rate: 0 - 99.99 m/min-1/R --> Step feed value during reversal: 0 - 0.999 mm / Ø --> Swivel capability of the workpiece headstock: --> B-axis: -32° (-23°) / +2° --> Resolution: 0.0001° (0.36") --> U-axis stroke (total): 300 mm --> Resolution: 0.001 mm / Ø --> Travel speed: 5 m/min-1 --> Centre height above workpiece table: 200 (300) mm --> Centre height above grinding table: 330 (430) mm --> Workpiece spindle passage: 50 (70) mm

Condition: ready for operation (used), Year of construction: 2008, General Data Measurements width 1560 mm Measurements depth 2000 mm Measurements height 2100 mm Machine weight 3000 kg Control Unit Brand FANUC Model 31i-Model A Movement X-Axis Movement 220 mm X-Axis Rapid Traverse 20000 mm/min Z-Axis Movement 300 mm Dsdpfx Asxuw E Dshujcp Z-Axis Rapid Traverse 20000 mm/min Additional Equipment Workpiece spindle motor: 2 kW This VOUMARD VM 110 CNC T was manufactured in 2008. A robust internal grinding machine, it features a GE FANUC Series 31i-Model A control, a maximum grinding diameter of 150 mm, and a depth of 80 mm. It supports a longitudinal travel (Z-axis) of 300 mm and a cross travel (X-axis) of 220 mm. Consider the opportunity to buy this VOUMARD VM 110 CNC T internal grinding machine. Contact us for more information. Application Types Grinding

Year of construction: 2014, condition: ready for operation (used), Grinding diameter: 6mm-150mm, max. grinding stroke: 125mm, swing diameter over table/with cover: 600mm/260mm, travel X/Z: 500mm/170mm, rapid traverse: 10m/min, feed: 10m/min, resolution X/Z: 0.0001mm, workpiece spindle speed: 850rpm. Machine dimensions X/Y/Z: approx. 2550mm/3100mm/1800mm, weight: approx. 2600kg. Documentation available. An on-site inspection is possible. The machine is located in China. Dsdpfx Aoxf Ikfehuocp

Year of construction: 1985, condition: good (used), machine/vehicle number: 108, Lg.No. 15256 Technical data: - Flexible shaft 1500 mm - 5 speeds - Belt grinding attachment - drive 380 V - mobile underframe - space requirement approx. W 600 x H 1400 x D 600 mm - weight approx. 80 kg Dodpsk Ea Tajfx Ahujcp

Condition: excellent (used), Year of construction: 1978, Machine can be inspected under power Dodswz Emljpfx Ahuocp

Condition: used, Year of construction: 2003, internal diameter 99999 mm grinding depth 99999 mm swing diameter 99999 mm grinding diameter 99999 mm grinding length 200 mm Djdpfx Aheuxft Soujcp centre height 175 mm CNC internal grinding machine B-axis 4 x 90° Q-axis for adjusting tapers Used with minor maintenance 2 HF internal grinding spindles: -Fischer MFM 1090 90,000 rpm -Fischer MFM 1242/60 42,000-60,000 rpm 1 external grinding motor spindle Fischer MFVS1407 7,000 rpm -Pneumatic power clamping device with 20mm stroke -Dressing device with 2 swivelling arms, hydraulically foldable back -Grinding detection ring sensor Dittel on the workpiece headstock -Passive grinding detection with magnetic base -Paper belt filter 375 l

Condition: used, Year of construction: 2006, max. workpiece diameter 830 mm workpiece length - max. 600 mm output 7,5 kW The workpiece spindle unit (U/B1) has a travel range of 300 mm for the U-axis and a swivel angle of -1° to +12° for the B1-axis. The infinitely variable speed ranges from 1 to 795 min-¹. The set-up speed (jogging) is 10 min-¹. The spindle head size corresponds to A 8 according to DIN 55026 and the through- hole has a diameter of 58.5 mm. The maximum workpiece diameter is 830 mm, the maximum workpiece length is 600 mm. The maximum load capacity on the spindle Djdpfewzmrcex Ahuecp head is 6,100 N. The internal grinding unit (Z1/X1/B2) has a Z1 axis travel of 800 mm and an X1 axis travel of 150 mm. The swivel angle of the B2 axis is 270°. The drive of the internal grinding spindles is infinitely variable and has an output of 7.5 kW. The mounting hole for the sanding block has a diameter of 100 mm. The maximum sanding diameter is 600 mm, as is the sanding depth. The manual longitudinal adjustment of the internal sanding axis on the table is 530 mm.

Condition: used, Year of construction: 1973, min./max. hole to grind 8 / 10 mm max. grinding depth by internal grinding 150 mm Dcjdpfx Ahet Rlguouep swing dia. 450 mm workpiece spindle bore 35 mm max. swivability 30 ° min/max. table longitudinal travel 5 / 150 mm/min Internal Grinding Machine | D14 - 1973 The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: D-14 | D 14

Condition: ready for operation (used), Year of construction: 2005, functionality: limited functionality, spindle speed (min.): 31,000 rpm, Equipment: rotational speed infinitely variable, We are offering for sale, due to a trade-in, a TOS BDU 250 A internal cylindrical grinding machine with the following specifications: Grinding diameter: 250 mm Maximum longitudinal table travel: 600 mm Maximum internal diameter: 250 mm Smallest diameter: 10 mm Workpiece spindle speed: 25; 45; 80; 140; 250; 450 rpm Internal grinding spindle mount: Currently Ø 100 mm Maximum diameter without chuck guard: 470 mm Adjustment of grinding headstock: 15° and 90°, mounted on an oscillating longitudinal table. Equipment: - Coolant tank - Hydraulic unit - Used internal grinding spindle - Machine lamp - Documentation and operating manual Machine information: Machine fault (transformer faulty, automatic operation possible only without dressing device). Dcodpsw Rllxofx Ahuep

Year of construction: 2014, condition: good (used), machine/vehicle number: 2014-1313, Offer 22651 Technical data: - mobile version with motorized forward - reverse drive + steering - mot. grinding stroke forward - backward with speed control - grinding stroke longitudinal forward + backward - mot. contact pressure - grinding pressure regulation - grinding belt dimension approx. 2000 x 50 mm - contact wheel B 60 / D 300 mm - pneumatic connection 6 bar Dcodsi Apb Njpfx Ahuop - drive 400 V / 2880 rpm / 7 kW - space requirement approx. W 5700 x H 1200 x D 1400 mm - Weight approx. 800 kg

Condition: good (used), JUNG D22 / Internal Cylindrical Grinding Machine - Machine suitable for internal cylindrical grinding and face grinding - Smallest machinable bore: 14 mm - Largest machinable bore: 150 mm - Grinding length without face grinding attachment: 250 mm - Grinding length with face grinding attachment: [information not provided] - 6 workpiece spindle speeds: 46–270 rpm - Spindle head swivels left/right: 30 degrees - Distance from spindle axis to table center: 250 mm - Maximum distance between workpiece spindle and grinding support: 935 mm - Spindle head adjustable/skewed up to 30 degrees each Dedpew Sv Dhofx Ahuocp - Worktable adjustable/skewed forward/backward up to 5 degrees each - Manual / automatic operation - Taper grinding attachment - Steady rest - 3-jaw chuck - Spare grinding spindles Dimensions: LxWxH: 2.8 x 1.5 x 1.8 meters / Weight: 3500 kg Errors and omissions excepted.

Condition: used, internal diameter 340/440 mm grinding depth 99999 mm grinding diameter 250,350,450 mm grinding length 600 mm centre height 125,175,225 mm bore 127 mm MK5 work piece spindle speed 20-400 U/min grinding head swivelling 360 ° grinding spindle head - swivable 180 + - ° grinding spindle speed 1500,1700,2200 U/min 0,001-0,030 mm/Ø 0-0,95 mm/Ø ±10 ° longitudinal feed of the table 900 mm table speeds 0,02-6 m/min 130 kg 130 inkl. Spannugkg kg 70 mm total power requirement 6,5 kW weight of the machine ca. 2,2 t dimensions of the machine ca. 3,1 x 2,0 m As the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the service for your metrical overhauled and repainted with: -Neuem CE konformem Schaltschrank. -Neuem Werkstückspindelmotor und Regler in Drehstromtechnik. -Digitalanzeige in 2 Achsen. Auflösung x-Achse 0,5my Optionen: -Drehgeber mit digitaler Anzeige im Werkstückspindelstock -Drehgeber mit digitaler Anzeige im Schleifspindelstock (keine Höhenverstellung mit Spindel möglich) -Neue stabile Innenschleifvorrichtung Durchmesser 80mm oder 100mm mit Höhenjustierung. -Erhöhung der Spitzenhöhe auf max. 225mm -Drehzahlregelung für die Schleifspindel Inklusive: -Bedienwerkzeug -Spannrohr für Futter weiteres Zubehör auf Anfrage. Die Werkzeugmaschine entspricht zum derzeitigen Zeitpunkt nicht den grundlegenden Sicherheits- und Schutzanforderungen wie in der BetrSichV 2015 genannt. Djdpfsd Ih Dxox Ahuocp Eine Anhebung des erforderlichen Mindest-Schutzzieles ist mittels einer Gefährdungsbeurteilung nach BetrSichV zu ermitteln.