Used Injection Mold Article for sale (3,293)

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, clamping force: 800 kN, screw diameter: 40 mm, displacement volume: 204 cm³, injection pressure: 1,860 bar, injection weight: 186 g, Here we offer the following well-maintained used injection moulding machine as an injection moulding machine dealer: Of course, we also purchase well-maintained injection moulding machines from the 2010 model year onwards. We have been a wholesale dealer for injection moulding machines for over 25 years. Manufacturer: KraussMaffei Model: KM EX 80-380 (fully electric) Serial number: 61013142 Year of manufacture: 2009 Operating hours: 35,808 h Control system: MC 5 Fully functional Condition: very well maintained Machine comes from original German ownership xxxxx without robot / without temperature control unit xxxxx Extras: - Pneumatic needle shut-off nozzle - 1 pneumatic valve on BWAP - Pneumatic control for 1 hot runner - Pneumatic control for hot runner/cold runner - Reject chute - Nozzle guard door – ejector area safety door foldable - Euromap 18 interface on FWAP - Electrically actuated ejector plate in BWAP - Hydraulic auxiliary unit for core pulls - Injection-compression control - 2 x hydraulic core pulls (on BWAP and FWAP) - Pressure relief for core pulls on BWAP and FWAP - Water manifold, 8 circuits - 8 heating zones for hot runner - Extrusion injection circuit with position control - 3 x 230V sockets, 2 x CEE 16A / 1 x CEE 32A - EUROMAP 67 signal interface for robot - Start-up sequence, quality assurance package, cycle time analysis, cycle memory, event protocol - BluePOWER package: energy consumption display - Graphics analysis package, trend chart Bjdpfx Acoyrd U Ueveda - Interface for temperature control unit - Cycle time analysis, actual cycle time optimization Injection unit: Screw diameter: 40 mm Shot weight: 186 g / PS Injection pressure: 1,860 bar Shot volume: 204 cm³ Clamping unit: Clamping force: 80 t / 800 kN Tie bar spacing: 420 x 420 mm Platen size: 655 x 670 mm Mould installation height: 250 mm Max. platen gap: 750 mm Ejector stroke/force: 100 mm / 22 kN Clamping unit fully electric Warranty: Warranty until first commissioning Loading/Shipping: Free loading onto buyer’s truck or free delivery within Germany against reimbursement of freight charges Available from our warehouse in Hannover, Germany

Condition: excellent (used), Year of construction: 2014, operating hours: 47,137 h, functionality: fully functional, machine/vehicle number: 61020607, clamping force: 1,300 kN, clearance between the columns: 470 mm, Here we, as dealers in injection moulding machines, offer the following well-maintained used injection moulding machine for sale. Of course, we also purchase well-maintained injection moulding machines from model year 2010 onwards. We have been wholesalers of used injection moulding machines for over 25 years. Important current notice – Tax information and benefit for used machines: From 01.07.2025, used machines will also be eligible for a special tax depreciation of 30% per year. In addition to the lower price compared to a new machine, you can claim the same depreciation amounts as for a new machine. Keyword: Growth booster (§ 7 paragraph 2 EStG-E). Manufacturer: Krauss Maffei Model: KM 130 750-130 CXV BluePower 2-color 2-component machine Control system: MC6 Year: 2014 Machine no.: 61020507 Operating hours: 47,137 h Complete maintenance records for the last 7 years / 25,000 operating hours 1st injection unit 750 horizontal Screw diameter: 50 mm Injection volume: 393 ccm Shot weight: 357 g Heating capacity: kW Heating zones: 5 Nozzle stroke: mm Injection pressure: 1,892 bar 2nd injection unit 180 vertical Screw diameter: 30 mm Injection volume: 85 ccm Shot weight: 77 g Injection pressure: 2,500 bar Clamping unit Clamping force: 130 t / 1,300 kN Opening stroke: 600 mm Tie bar spacing: 470 x 470 mm Plate size: 745 x 770 mm Max. daylight: 900 mm Min. mould installation height: 300 mm Ejector stroke: 150 mm / ejector force: 23 kN Dimensions: 4.39 x 1.61 x 4.01 m Weight: 9,000 kg Extras – complete machine data sheet attached as PDF document Nozzle side: Needle shut-off A+C 1 x hydraulic core pull 1 x pneumatic core pull 1 x air blast Ejector side: 1 x hydraulic core pull 3 x pneumatic core pulls 1 x air blast Water BGS: 6 circuits each on nozzle and ejector side BluePower technology: up to 40% energy savings The machine is in excellent condition and can be inspected under power. Any peripheral devices shown are NOT included in the offer! The machine is available immediately. Free loaded onto buyer’s truck or delivered free to destination against reimbursement of freight costs. For information about the machines we offer and our company: - We only sell our own machines, purchased from ongoing production, from our warehouse in Hanover Bsdsyf Uy Ujpfx Acvoda - All machines offered are inspected and tested prior to dismantling - We do NOT sell insolvency assets – we are NOT intermediaries trading in third-party property - All machines offered come from successful companies for whom regular maintenance is a given - All offered machines are available for viewing at our warehouse

Condition: reconditioned (used), operating hours: 27,716 h, functionality: fully functional, clamping force: 220 kN, screw diameter: 24 mm, clearance between the columns: 254 mm, displacement volume: 36 cm³, injection pressure: 1,455 bar, injection weight: 32 g, total length: 1,980 mm, total width: 815 mm, total height: 1,897 mm, overall weight: 1,105 kg, Now fully refurbished by the team at STV Machinery is this Boy 22M-HV machine. It has a horizontal clamp unit and a vertical injection unit which it makes it suited for split-line injection. It is fitted with a 24mm diameter screw. Manufactured in 2006 and has less than 28,000 hours. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Bsdpfx Acox U Ay Nevjda Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the hassle and additional costs of purchasing machinery within the UK and EU. Contact us with a potential delivery address and we’ll do the rest.

Condition: refurbished (used), operating hours: 42,000 h, functionality: fully functional, clamping force: 220 kN, screw diameter: 24 mm, clearance between the columns: 254 mm, displacement volume: 36 cm³, injection pressure: 1,455 bar, injection weight: 32 g, total length: 2,430 mm, total width: 810 mm, total height: 1,620 mm, Our team are currently working on the refurbishment of this BOY 22M injection moulding machine. This machine is fitted with a 24mm screw. BOY machines are very popular due to their small footprint. Any machines awaiting or undergoing refurbishment by us can be reserved with a 10% deposit. As this machine is already underway, you can expect this machine to be fully refurbished by our in-house experts within a matter of weeks. Bdedpex U Axfjfx Acvja Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the hassle and additional costs of purchasing machinery within the UK and EU. Contact us with a potential delivery address and we’ll do the rest. *The video shown in this listing is of a previously refurbished BOY 22M which is very similar to the BOY 22M machine we are currently refurbishing. Please contact the team if you would like to see the machine in person.

Condition: excellent (used), Year of construction: 2001, operating hours: 25,850 h, clamping force: 40 kN, screw diameter: 25 mm, The Negri Bossi 40T in very good condition did low hours was in clean room production Bdedpfoyivplex Acvoa

Condition: good (used), Year of construction: 2001, functionality: fully functional, clamping force: 55 kN, screw diameter: 32 mm, The Negri Bossi 55T Its in good working condition have faulty screen the owner connected to external screen hours under 28500 . The machine was in clean room prouduction . Bdjdpfeyivirex Acvsa

Condition: used, Year of construction: 1999, operating hours: 82,540 h, Injection Molding Machine Krauss Maffei Model: KM 800-5700 MC Year: 1999 Screw diameter: 105 mm 4 core pullers 1 air valve AS Approx. 82,540 operating hours Mold installation height: min. 600 mm, max. 1,100 mm Bedpfeyup D Hex Acveda Clamping stroke: 1,400 mm Platen dimensions: 1,300 mm x 1,300 mm Tie bar distance (horizontal): 1,120 mm, (vertical): 1,000 mm Centering ring: 250 mm 8 water circuits each Conveyor belt Enclosure Handling system Tested and pump connections sealed by KM in 2025 The machine is operational and still in production Location: Thuringia _____ Our general terms and conditions apply; the seller assumes no liability for typing or data transmission errors. The specifications and images were provided to us by the owner and released for publication. The appearance of the offered items corresponds to their age and the images shown. The technology and wear of the offered items are age-appropriate. Used machines are sold exclusively to commercial customers and without warranty.

Condition: refurbished (used), Krauss Maffei injection molding machine 25 tons Year: 2000 IPC not working (see map) Bjdpferdg Tpsx Acvoda

Condition: used, Year of construction: 2012, operating hours: 24,700 h, functionality: fully functional, machine/vehicle number: B762, clamping force: 62 kN, screw diameter: 12 mm, clearance between the columns: 77 mm, displacement volume: 6 cm³, injection pressure: 1,830 bar, mold height (min.): 70 mm, ejector force: 5,000 N, ejector stroke: 45 mm, opening stroke: 110 mm, plate width: 77 mm, plate height: 77 mm, installation height: 180 mm, total length: 1,160 mm, total width: 700 mm, total height: 1,950 mm, overall weight: 150 kg, power: 3 kW (4.08 HP), type of input current: three-phase, input voltage: 400 V, For sale is a very well-maintained Cronoplast 6/10P injection molding machine from 2008. This machine has only ever been operated by a professional injection molder, has received regular maintenance, and is in excellent condition. With only 24,700 operating hours, it is one of the least-used machines in its performance class and is immediately ready for use. Thanks to its extensive additional equipment, this unit offers optimal conditions for efficient, precise, and stable production processes. Equipment & Highlights ✔ Selector flap – ensures clean ejection and optimized part handling ✔ Ceramic heating beads – enable higher processing temperatures and energy-efficient heating ✔ Electric mold heating unit – provides precise mold temperature control ✔ Robust machine frame – ideal for operation and maintenance ✔ Blow-off unit – improves part removal and process reliability ✔ Additional power sockets – perfect for peripheral equipment and accessories By buying directly from the machine owner, you completely avoid dealer commission fees. We have additional machines of this type in stock. Equipment is identical, operating hours may vary. Contact us for an attractive package offer. Technical Data – Cronoplast 6/10P Plasticizing / Injection Unit Plasticizing unit: - Screw diameter: 12 mm - Shot volume: 6 cm³ - Injection pressure (specific): 1,830 bar Clamping unit: - Clamping force: 62.5 kN - Opening force: 4 kN Bdsdpeytgmvsfx Acvsa - Opening stroke: 30-110 mm - Ejector force: 5 kN - Ejector stroke: 45 mm Dimensions: - Weight including frame: approx. 250 kg Sale is made with exclusion of any warranty and liability for material defects.

Condition: excellent (used), Year of construction: 2009, operating hours: 78,099 h, functionality: fully functional, screw diameter: 25 mm, Arburg 520S 1600 290/70 2-component 12.3 million cycles 86,565 hours manual operation 78,099 hours automatic operation Injection unit 1 horizontal 290, diameter 25, max. 71 cm³ Injection unit 2 vertical 70, diameter 18, max. 21 cm³ Opening stroke 925 mm Electric index rotation 12-zone hot runner integrated 3x core pull 2x air blow (control for needle shut-off) Bdedpexzix Aefx Acvea Various customer inputs and outputs Interfaces: ALS Temperature control units Dryers Multilift H 6kg: 2x vacuum 5x double-acting grippers Z-axis servo 800mm C, G, X, and B-axes pneumatic Various customer inputs and outputs (gripper monitoring, etc.) Important Notice!!! Current update – Tax note and benefit for used machinery From 01.07.2025, used machines can also be considered for tax purposes with a special depreciation of 30% per year. In addition to the lower price compared to a new machine, you can claim the same depreciation amounts as for a new machine. Keyword: Growth Booster (§ 7 Section 2 EStG-E)

Condition: used, Year of construction: 2009, machine/vehicle number: PR21, Used injection molding machine HyPET 120 - 2009Technical Specifications & Performance DataThis Husky injection molding machine is engineered for high-volume PET preform manufacturing and is well suited for integration into a used bottling line or as a second hand addition to industrial packaging operations. The 120-ton clamping platform is paired with a 32-cavity hot runner system, enabling consistent output of PET preforms across multiple bottle formats. Manufactured by Husky in 2009, the unit is configured for rapid mold changeovers and stable cycle times, supporting beverage production with precise neck finishes and preform weights.Manufacturer: HuskyModel: HyPET120 P85/95 E85Year of manufacture: 2009Clamping force: 120 tonsCavities: 32Hot runner system: Husky 32-cavity hot runner, common across supplied moldsNeck finishes: 29/25 mm primary; additional parts for 30/25 mmPreform weights (29/25 mm sets): 9.02 g, 12.46 g, 18.70 gAdditional 30/25 mm parts: 10.5 g, 14.0 g, 22.0 g, 25.0 g (one complete assembled set at 22.0 g)Cycle times (typical): 7 s, 8 s, 9 sElectrical supply: 400 V, 50 Hz, 3PH+N+PEMain supply current: 191 A (auxiliary supply: 40 A)Short-circuit rating (panel): 10 kAIncluded peripherals: Plastic Systems resin dryer with material hopper, mold dehumidifier, and available sparesBottle formats supported via preforms: 0.2L, 0.5L, 1.0LContainer material: PETAdvanced Automation & Control SystemsThe machine features Husky engineering for precise temperature control, shot stability, and efficient thermal management across the 32-cavity hot runner. The molding system supports fast setup with plug-and-play cold half plates, simplifying changeovers between formats and weights. Operator interaction is streamlined through an integrated control interface for recipe management, alarm diagnostics, and process monitoring. The control panel is designed for industrial duty with a 10 kA short-circuit rating and clear segregation of main and auxiliary supplies.Integrated HMI for process control and monitoringHot runner temperature control across all 32 cavitiesQuick-change cold half plates, tooling plate, and cooling pick setElectrical: 400 V, 50 Hz, three-phase with neutral and protective earthProduction Line Integration CapabilitiesOptimized for PET preform manufacturing, this system integrates cleanly with upstream resin handling and downstream conveyance to stretch blow molding, quality inspection, and packing stations in beverage production. The included Plastic Systems resin dryer and mold dehumidifier stabilize material and mold conditions, enhancing repeatability and line throughput in broader bottling equipment ecosystems.Inline or standalone operation for preform supplyCompatible with industrial packaging and beverage produ... Bedpfoyhbd Sox Acveda

Condition: used, Year of construction: 2009, machine/vehicle number: PR22, Used injection molding machine H160 - 2009Technical Specifications & Performance DataThis Husky injection molding machine is engineered for high-efficiency cap and closure production, making it an excellent choice for beverage production environments that require consistent, high-quality outputs. Manufactured in 2009, the unit features a 160-ton clamp force platform paired with a 24-cavity cap mold optimized for 29/25 mm neck finishes. It is supplied with robust auxiliary equipment to stabilize process conditions and streamline operation in an industrial packaging workflow.Manufacturer: Husky Injection Molding SystemsModel: H160 RS45/42Year: 2009Application: Cap/closure molding for beverage packagingMold cavitation: 24 cavitiesClosure specification: 29/25 mm, Free Start CapNominal part weight: 1.20 g (cap)Clamp force: 160 tonsElectrical supply: 400 V, 50 Hz, 3PH+N+PEMain supply current: 101 ALargest motor load: 42 ALargest heat load: 31 AShort-circuit current rating (SCCR): 10 kAIncluded equipment: Altanium heater controller, mold dehumidifier, hopper loader, color mixer unit, available spare partsAdvanced Automation & Control SystemsThe machine is equipped with an Altanium heater controller to deliver precise thermal management across the hot runner zones. This tight temperature control promotes uniform melt flow, faster startups, and reduced scrap, vital for thin-wall cap molding. The industrial control panel supports a 3-phase + neutral + protective earth electrical system, with clearly defined load ratings for motors and heating circuits to facilitate safe integration and predictable operation.Precision heater control with Altanium technologyClearly rated electrical distribution for motors and heatersStable process conditions for consistent cap qualityDesigned for quick setup and repeatable mold changeoversProduction Line Integration CapabilitiesThis unit integrates seamlessly into cap and closure production cells serving a used bottling line or standalone cap manufacturing operations. It can feed downstream systems such as vision inspection, lining/printing, and bulk handling for PET bottle closures. The 29/25 mm specification aligns with common beverage packaging neck finishes, supporting high-throughput operations in industrial packaging environments.Standalone or inline operation with downstream handlingCompatible with PET bottle packaging for beverage productionAuxiliaries included to stabilize material handling and color dosingMachine Condition & Maintenance HistoryThe machine is indicated as still in production, reflecting ongoing operational status and functional readiness. The inclusion of a comprehensive set of available spares and auxiliary units supports routine maintenance, uptime, and rapid troubleshooting typical of second hand i... Bodpfoyhbdxsx Acvoda

Condition: like new (used), Year of construction: 2018, operating hours: 33,526 h, functionality: fully functional, clamping force: 1,600 kN, screw diameter: 40 mm, displacement volume: 220 cm³, Technical Data - Clamping Unit Clamping force: 1600 kN Tie bar spacing (h x v): 520 x 520 mm Platen size (h x v): 760 x 760 mm Minimum mould height: 250 mm Maximum mould height: 600 mm Bdsdpfx Ajyk T I Uecvoa Maximum daylight: 1060 mm Opening stroke: 460 mm Ejector stroke: 150 mm Ejector force: 40 kN Mould weight: 1250 kg Technical Data - Injection Unit Screw diameter: 40 mm Shot volume: 220 ccm Injection pressure: 2000 bar Screw L/D ratio: 20 l/d Screw stroke: 175 mm Screw speed: 420 rpm Plasticising rate (PS): 33 g/s Free shot weight (PS): 224 g/s Number of heating zones: 4 Nozzle stroke: 305 mm Dimensions & Weight Machine dimensions (L x W x H): 5.9 m x 1.7 m x 2.2 m Total weight: 8,400 kg Equipment Display language: German Hydraulic core pull, 1x Core pull unit, hydraulic Machine without material loader Needle shut-off nozzle, pneumatically actuated EUROMAP 63 interface

Condition: excellent (used), Year of construction: 1998, clamping force: 80 kN, screw diameter: 38 mm, The Boy 80T In Very Condition The Machine Done Low Hours One Owner Used In Training Centre Bdsdpfeyhrqisx Acvoa

Condition: used, Year of construction: 2016, operating hours: 24,580 h, functionality: fully functional, clamping force: 70 kN, screw diameter: 42 mm, The Romi 70T Plastic Machine year 2016 Its In Very Good Condition Have Servo Motor Done Low Hours Bdodpjyhrplofx Acvoa

Condition: excellent (used), Year of construction: 2006, operating hours: 33,108 h, functionality: fully functional, clamping force: 1,300 kN, screw diameter: 25 mm, displacement volume: 79 cm³, injection pressure: 2,398 bar, ejector force: 6,100 N, ejector stroke: 100 mm, opening stroke: 606 mm, plate length: 750 mm, plate width: 850 mm, overall weight: 10,600 kg, Equipment: documentation/manual, Technical Details Manufacturer: Engel Model: V 330H/80V/130 Combi Cleanroom Year of manufacture: 2006 Operating hours: 33,107 h Screw: 25/22 mm Machine weight: 10,600 kg Additional equipment included: Bodst A Ui Ajpfx Acveda GEKU SR 500 ST robot Safety enclosure Rotary table The machine has operated for almost 33,107 hours in automatic mode.

Condition: excellent (used), Year of construction: 2008, operating hours: 58,001 h, functionality: fully functional, clamping force: 1,000 kN, screw diameter: 25 mm, displacement volume: 59 cm³, injection pressure: 20 bar, mold height (min.): 250 mm, ejector force: 25 N, ejector stroke: 100 mm, overall weight: 3,900 kg, Equipment: documentation/manual, Engel E Max cleanroom machine, year of manufacture 2008, including GEKU SR 500 ST linear robot. The machine has operated for just under 58,000 pump hours in automatic mode. It comes from a reputable producer in the pharmaceutical industry, which means both the machine and the handling system have been subject to very strict maintenance management and are in excellent condition. Bdsdpjt A Ufwsfx Acvea

Condition: used, Year of construction: 2005, Technical details: Bdedewftr Depfx Acvea screw size: 70 mm injection shot weight in Polysterol: 687 g/PS closing pressure: 3000 kN weight of the machine ca.: 19,4 t PreHeating unit and airsoaking unit is not in package !! *

Condition: used, Year of construction: 1998, operating hours: 99,161 h, clamping force: 32,000 kN, screw diameter: 130 mm, injection weight: 8,100 g, total length: 4,900 mm, total height: 4,200 mm, overall weight: 230,000 kg, # Sales Description A high-performance injection molding machine from the German manufacturer KraussMaffei is available for sale. This is the KM 3200-19000 MC model, specifically designed for the production of large-sized plastic components and industrial series manufacturing. The machine offers very high clamping force and is particularly suitable for applications involving technical plastic parts or large-scale items. The machine features a clamping force of 32,000 kN, a screw diameter of 130 mm, and a maximum shot weight of 8,100 g. This allows for the efficient production of large parts with high material requirements. In addition, the system is equipped with extensive peripheral equipment, including a robot interface for KUKA KRC4, a S.I.S.E. IS’Tech sequential injection controller, GWK temperature control units, and a Motan Colormetric dosing and mixing system. A belt conveyor is also included in the package. Technical Data * Manufacturer: KraussMaffei * Model: KM 3200-19000 MC * Machine No.: IMM MC3F No.12 * Year of manufacture: 1998 * Operating hours: approx. 99,161 h Performance * Clamping force: 32,000 kN * Screw diameter: 130 mm * Max. shot weight: 8,100 g Bedpjyt H Dhefx Acvjda Dimensions and Weight * Machine weight: approx. 230,000 kg * Machine depth: approx. 4,900 mm * Machine height: approx. 4,200 mm The machine represents a robust and proven solution for industrial plastics processing and is especially suitable for manufacturers requiring large-format injection molding capacity. Further information, photos, or inspection appointments are available upon request.

Condition: used, Year of construction: 1998, operating hours: 98,806 h, clamping force: 40,000 kN, screw diameter: 130 mm, injection weight: 8,100 g, total length: 4,900 mm, total height: 4,200 mm, overall weight: 255,000 kg, 2x KraussMaffei KM 4000-19000 MC – Injection Moulding Machines – Year 1998 For sale are two identical injection moulding machines manufactured by KraussMaffei, model KM 4000-19000 MC equipped with MC3F control system. These machines are particularly suitable for producing large plastic components that require very high clamping force. The systems are fully equipped and include several peripheral devices for material feeding and process control. ## Technical Data * Manufacturer: KraussMaffei * Model: KM 4000-19000 MC * Control: MC3F * Year of manufacture: 1998 * Operating hours: approx. 98,806 h * Clamping force: 40,000 kN * Maximum shot weight: 8,100 g * Screw diameter: 130 mm ## Dimensions & Weight * Machine depth: 4,900 mm * Machine height: 4,200 mm * Machine weight: approx. 255,000 kg ## Equipment * Robot interface: KUKA KRC4 * Sequential injection controller: S.I.S.E. IS-Tech * Temperature control units: GWK Bdsdpfx Aceyt Hy Nsvja * Dosing and mixing system: Motan Colormetric * Belt conveyor ## Available Machines * Machine No. 14 * Machine No. 15 The machines can be purchased individually or as a package. Inspection by appointment is possible.

Condition: used, Year of construction: 1998, operating hours: 101,215 h, machine/vehicle number: 23J01415, clamping force: 23,000 kN, injection weight: 6,100 g, total length: 4,500 mm, total height: 3,800 mm, overall weight: 205,000 kg, # Sales Description Two high-performance injection molding machines from the renowned manufacturer KraussMaffei are available for sale. These are KM 2300-14700 MC models, specifically designed for the production of large-volume plastic parts and industrial series manufacturing. Each machine offers a clamping force of 23,000 kN, equipped with a screw diameter of 105 mm and a maximum shot weight of 6,100 g—ideal for applications involving large components and high material throughput. Both units are provided with extensive peripheral equipment, including a robot interface for KUKA KRC4, a S.I.S.E. IS’Tech sequential injection controller, GWK temperature control units, and a Motan Colormetric dosing and mixing system. A belt conveyor is also part of the package. The machines originate from the years 1997 and 1998 and have been operated in an industrial production setting. Technical Overview: Machine 1 - Model: KraussMaffei KM 2300-14700 MC (IMM MC3F No. 6) - Year of manufacture: 1998 - Operating hours: approx. 101,215 h Machine 2 - Model: KraussMaffei KM 2300-14700 MC (IMM MC3F No. 9) - Year of manufacture: 1997 - Operating hours: approx. 99,030 h Shared technical data: - Clamping force: 23,000 kN - Screw diameter: 105 mm - Max. shot weight: 6,100 g - Machine weight: approx. 205,000 kg - Machine dimensions: Bsdpfsyt Hidjx Acvoda - Depth: approx. 4,500 mm - Height: approx. 3,800 mm These machines deliver a reliable and field-proven solution for industrial plastics processing, making them especially attractive to companies seeking large-format injection molding capability.

Condition: used, Year of construction: 2007, Technical details: closing pressure: 3500 kN Bedpfxoymfk Hs Acvjda weight of the machine ca.: 17 t

Condition: ready for operation (used), Year of construction: 1997, Stock-No. 13602 Manufacturer Krauss Maffei Type of machine KM 650 – 8000 CM Year 1997 Working hours 80000 h Controlversion MC 3-F Bodpfoub S R Hox Acvoda Screentext German Location Eschweiler - Germany Clamping unit: Clamping force 6500 kN Mould opening force, max. 346 kN Travel force movable platen opening 169 kN Travel force movable platen closing 144 kN Size of mould platens (h x v) 1704 x 1700 mm Distance between tie bars (h x v) 930 x 930 mm Mould opening stroke 1150 mm Mould height min 600 mm Max. daylight 1750 mm Hydraulic ejector - stroke 250 mm Ejector force 226 kN Injection unit: Screw diameter 130 mm Ls/D ratio 20 Injection pressure 1296 bar Stroke volume 6172 ccm Shot weight (PS) 5617 gr. Injection rate 1540 ccm/s Screw speed 138 1/min Plasticising rate max. 238 g/s Nozzle pressure 246 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 132 kW Installed heating capacity 70 kW Adjustable barrel heating zones 7 Dimensions and weights: Dimensions of the machine ca. 12,00 x 2,80 x 2,70 m Total machine weight 43000 kg Accessories: - Anti vibration pads Additional Options: - 1 x air valve - 2 x core pulls on movable plate - 2 x core pulls on fix plate - 8 x hotrunner controller - Robot interface according to Euromap 67

Condition: excellent (used), Year of construction: 2017, operating hours: 1,437 h, functionality: fully functional, machine/vehicle number: 137949-100, clamping force: 2,100 kN, screw diameter: 65 mm, displacement volume: 913 cm³, injection pressure: 1,600 bar, overall weight: 10,500 kg, controller model: UNILOG B8, The machine was serviced and upgraded to the latest standards by the manufacturer in 2021! It has not been used since and is therefore in very good condition! The machine is offered complete with 2 Kistler modules for cavity pressure control! TECHNICAL DETAILS Plastic type: Thermoset Clamping force: 2,100 kN Screw diameter: 65 mm Screw stroke: 275 mm Bsdpfjyi Ailsx Acvsda Screw L/D ratio: 22 Max. screw speed: 278 rpm Screw torque: 1,920 Nm Tie bar spacing (HxV): 670 x 620 mm Mold installation height: 350 mm Platen daylight: 1,100 mm Opening stroke: 750 mm Ejector stroke: 200 mm Ejector force: 65 kN Theoretical shot volume: 913 cm³ Specific injection pressure: 1,600 bar Max. plasticising rate: 62 g/s Nozzle stroke / nozzle force: 400 mm / 100 kN Free-shot injection rate: 419 cm³/s Barrel heater power: 27 kW Number of heating zones incl. nozzle: 5 MACHINE DETAILS Control system: UNILOG B8 Hydraulics Hydraulic oil tank capacity: 600 liters Oil temperature min/max (HLP 32): 30 °C / 40 °C Oil temperature min/max (HLP 46): 40 °C / 50 °C Oil cooling activation temperature (HLP 32): 35 °C Oil cooling activation temperature (HLP 46): 45 °C Electrical Drive power hydraulic pump: 37 kW Max. screw barrel temperature: 350 °C Cooling water system Cooling water consumption: approx. 0.5 - 1.5 m³/h Max. cooling water supply temperature: 35 °C Cooling water return: max. 10 bar Ambient temperature: °C Noise level: 65 dB(A) Weight: 10,500 kg Operating hours: 1,437 h EQUIPMENT Kistler module for cavity pressure control, range 1: 20,000 pC Kistler module for cavity pressure control, range 2: 10,000 pC

Condition: good (used), Year of construction: 2001, operating hours: 56,380 h, machine/vehicle number: 184172, Used injection molding machine The machine has a complete history with all important repair work and components replacement hoses etc. Manufacturer: Arburg Type: 420C 1300-350 Year of construction: 2001 Machine no. 184172 Control system: Selogica Operating hours: 56380 h constant maintenance by manufacturer clamping unit Clamping force: 1300 kN/ 130 tons Distance between tie bars: 420 x 420 mm Mold mounting platens: 570 x 570 mm Ejector stroke: 175 mm / 40 kN Opening stroke: 500 mm Tool installation height: 250 mm Distance between platens: 750 mm max. Bodpfx Aovimd Njcvjda Injection unit Injection volume: 145 ccm Injection weight: 127 g Cgu3U8W0U Screw diameter: 35 mm Injection pressure: 2500 bar Extras Hydraulic core pull - Available immediately from our warehouse in Hanover, free on delivery or free to your door against freight reimbursement - Functionally tested (guaranteed function until first commissioning)