Injection molding machine

KraussMaffei KM 201-380 PX

Condition: excellent (used), KRAUSSMAFFEI KM 201-380 PX Injection Molding Machine Year of manufacture: 2020 Operating hours: 21,849 h Manufacturer: KraussMaffei Model: KM 201-380 PX Control system: MC6 – industrial control system based on real-time Ethernet technology Clamping unit design: five-point, double toggle lever mechanism, three-plate unit Clamping drive: servo-electric Injection and plasticizing drive: servo-electric Iedpfsz Atc Isx Afueih Injection unit movement: servo-hydraulic CLAMPING UNIT Clamping force: 2,000 kN / 200 t Opening force: 300 kN Dimensions of mounting platens: 870 × 820 mm Distance between columns: 635 × 585 mm Opening stroke: 500 mm Mold height min.–max.: 250–550 mm Max. opening width: 1,050 mm Ejector stroke: 200 mm Ejector force front/rear: 39 / 19 kN Ejector speed: 350 mm/s INJECTION UNIT Screw diameter: 40 mm L/D ratio: 20:1 Injection pressure: 1,860 bar Injection volume: 201 cm³ Injection shot weight: 183 g Injection speed: 125 mm/s Injection rate: 157 cm³/s Screw speed: 334 rpm Plasticizing rate: 24.7 g/s Torque: 337 Nm Nozzle clamping force: 34 kN Nozzle radius: 10 mm Nozzle orifice: 4 mm ELECTRICAL PARAMETERS Connected load: 13.8 kW Protection: 63 A Heater power: 11.5 kW Number of cylinder heating zones: 5 Dry cycle according to EUROMAP 6: 2.0 s / 445 mm Oil tank capacity: 200 l WEIGHT AND DIMENSIONS Net weight with control cabinet: 14.3 t Dimensions (L × W × H): 6.12 × 2.17 × 2.21 m

Condition: excellent (used), Year of construction: 2008, Injection molding machine BATTENFELD HM 60/350 S Year of manufacture: 2008 Injection elements: Screw diameter: 35 mm Injection weight : 153.8 g Injection pressure: 2083 bar Injection volume: 169 ccm Closure elements: Closing force : 60 t Clearance between columns: 370x320 mm Dimensions of table plates max: 550x530 mm Ejector: hydraulic Closing system: hydraulic Control: UNILOG B6 Additional equipment: Machine in very good technical condition Iiodpfxek Rnq Nj Afuoh Euromap 67 Dimensions: Weight: 3100 kg Length/Width/Height: 3.79x1.24x1.88 m Power supply: Pump/motor: 15 kW Heaters: 10.4 kW Total: 25.4 kW

Condition: like new (used), Year of construction: 2023, Technical Data: Maximum clamping force: 3,500 kN Maximum locking force: 3,850 kN Opening stroke: 725 mm Minimum mold installation height: 400 mm Maximum mold installation height: 900 mm (extended) Clamping plate dimensions (h x v): 1,168 x 1,144 mm Clear tie bar spacing (width x height): 830 x 830 mm Maximum mold weight: 6,600 kg Maximum weight on moving platen: 3,800 kg Maximum weight on fixed platen: 5,100 kg Ejector stroke: 250 mm Ejector force (increased): 100 kN Max. ejector speed: 270 mm Screw diameter: 60 mm Injection pressure: 2,426 bar Max. injection volume: 891 cm³ Max. injection speed: 160 mm/s Max. dosing stroke: 315 mm Max. nozzle stroke: 520 mm Nozzle immersion depth: 20 mm Back pressure over dosing stroke programmable Installed cylinder heating: 23.1 kW Material hopper capacity: 110 l Machine weight: approx. 21 t Accessories: Robot: Manufacturer: SEPRO ROBOTIQUE (France) Model: 5T35 2000/900/TE-1800 Year of manufacture: 2023 Stroke: 2,000 mm Speed: 3.5 m/s Horizontal demolding stroke Y-axis: 900 mm Vertical demolding stroke X-axis: 1,800 mm Robot console on fixed platen Gripper function R1 (C) axis pneumatic 0° - 90°, including quick-change plate Weight: 583 kg Iodpfx Ajy Hmfysfujih MuCell Integration: The special option includes: • Plasticizing cylinder with pneumatic shut-off nozzle without mixing element and without non-return valve; • Interface (communication, emergency stop interface); • Software with functional display pages for controlling the MuCell function; • Adapted nozzle guard; • Position-controlled high-speed screw (analog ZE388) Conveyor belt: Width: 870 mm Usable width: 800 mm Length: 3,500 mm Height: 880 - 1,220 mm Load capacity: 38 kg/m² Belt speed: 5.7 m/min Number of frames: 2 Clear tunnel height: 500 mm This injection molding machine is fully equipped!! Condition: As new condition, only 5,290 operating hours.

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 61036936, clamping force: 800 kN, screw diameter: 35 mm, displacement volume: 135 cm³, injection pressure: 1,837 bar, injection weight: 123 g, mold height (min.): 150 mm, ejector force: 22,000 N, ejector stroke: 100 mm, opening stroke: 750 mm, installation height: 400 mm, total length: 4,750 mm, total width: 1,670 mm, total height: 1,820 mm, overall weight: 5,900 kg, heating capacity: 8.9 kW (12.10 HP), drive type: Vollelektrisch, clear span: 470 mm, tool weight: 600,000 g, Injection molding machines direct from the manufacturer! As the manufacturer KraussMaffei, we offer you our tested and flexible stock machines here: The basic injection molding machine, precisionMolding, offers the perfect entry-level solution for all-electric injection molding, enabling you to react quickly and innovatively to market requirements. It combines high performance, simple operation and short delivery times. It can be used in a wide range of applications, e.g. in the packaging industry, the electrical and electronics industry, medical technology and the automotive industry. Your benefits: - Optimized price-performance ratio for a wide range of applications - High energy efficiency thanks to all-electric machine concept - Realization of demanding delivery times thanks to basic machine concept with a wide range of options TECHNICAL DATA: KM 80 / 250 PA G01 (order 38670013) (machine no.: 61036936, new, year of manufacture 2023) CONTROL  MC P1 with 15" TFT color screen with multi-touch functions CLAMPING UNIT  Clamping force kN 800  Mold opening force, max kN 120  Clear width (h x v) mm 470 x 420  Clamping platen (h x v) mm 610 x 560  Tool installation height min. - max. mm 150 - 400  Opening width mm 750  Mold opening stroke max. mm 350  Ejector drive electric  Ejector stroke mm 100  Ejector force forwards/backwards kN 22 / 22  Ejector speed forwards/backwards mm/s 300 / 300  Max. Mold weight kg 600 SPRING UNIT  Screw diameter / type mm 35 / standard  Effective Ls/D ratio 20.0  Injection pressure bar 1837  Stroke volume cm³ 135  Shot weight at max. stroke for PS g 123  Injection speed mm/s 200  Injection flow rate cm³/s 192  Screw drive/speed 1/min 382  Plasticizing flow (standard screw)4) g/s 19.5  Nozzle contact force kN 30 ELECTRICAL PARAMETERS  Connected load kW 17.8  Installed heat output kW 8.9  Power supply V / Hz 400 / 50 3 phases with neutral conductor WEIGHT AND DIMENSIONS Iisdpfxjuggb De Afush  Net weight with switch cabinet t 5.9  Length x width x height m 4.75 x 1.67 x 1.82 ADDITIONAL EQUIPMENT  Low-wear plasticizing  BluePower fully insulated plasticizing cylinder  Open nozzle  Air valve 1 - fold (BWAP)  Pneum. Control hot runner valve gate 1 - compartment  Electrical interface cascade 4-fold  Electrical preparation for hydraulic auxiliary unit  Euromap interfaces handling E18, E63  Euromap interface (central computer) E67, E77  Water battery 4 - compartment  Automatic central lubrication  Adaptive Process Control (APC)  Spray embossing circuit  Graphic analysis package  Swivel device Injection unit The machine is located in our factory in Parsdorf and is available at short notice. Further additional options can be offered on request. We look forward to your inquiry.

Condition: excellent (used), Year of construction: 2010, Krauss Maffei KM 80-380 CX Injection Moulding Machine Year of manufacture: 2010 Clamping unit Clamping force: 800 kN Mounting plate dimensions (H × V): 670 × 670 mm Space between tie bars (H × V): 420 × 420 mm Mould height (min./max.): 250 mm Maximum opening: 750 mm Isdpjxw Upfjfx Afuoih Injection unit Screw diameter: 40 mm Injection volume: 201 cm³ Shot weight (PS): 183 g Injection pressure: 1860 bar Electro-hydraulic equipment Pump motor power: 15 kW Heater power: 10.9 kW Dimensions and weight Machine dimensions (L × W × H): 4.09 × 1.48 × 2.02 m Weight (with control cabinet): 3.55 t

Condition: excellent (used), Year of construction: 2011, BATTENFELD 35/75 PLUS INJECTION MOLDING MACHINE Technical specifications: Iisdsy Uk Axopfx Afush Year of manufacture: 2011 Operating hours: 89,192 h Clamping force: 350 kN Injection volume: 25.4 cm³ Injection shot weight: approx. 23–27 g PS Screw diameter: 18 mm Maximum mold opening stroke: 200 mm Column spacing: 270 x 260 mm Platen dimensions: 470 x 280 mm Minimum mold height: 150 mm Centering hole diameter: 110 mm Maximum injection pressure: 2034 bar Hydraulic oil volume: 125 dm³ Total power: 28 kW Machine weight: 1050 kg Machine type: hydraulic Control system: BATTENFELD UNILOG B2 The machine is in very good technical and visual condition. A larger number of machines in the same configuration are available – a total of 12 units manufactured in 2010–2011.

Condition: good (used), Cold water set, cooling water circuit, heat exchanger, cooling for spot welding device, spot welding machine, spot welding system, spot welding tongs -Chiller: complete refrigeration unit Iijdpfx Aolpi Tqsfueh -Compressor: Danfoss type: MTZ22JC4A -Pump: Lowara type CEA70/5 0.55 kW -Total dimensions: 740/710/H930 mm -Weight: 196 kg

Condition: good (used), Year of construction: 2011, Ref. no.: 18586 Manufacturer: KRAUSS MAFFEI Type: KM180-750 AX All Electric Year of construction: 2011 Clamping unit Clamping force: 180 ton Opening stroke: 1050 mm Distance between tie bars: 560 × 510 mm Mould height min.: 200 mm Mould height max.: 600 mm Platen size (h x v): 790 × 740 mm Injection unit Screw diameter: 50 mm Injection volume: 393 cm³ Shot weight: 357 g Injection pressure: 1892 bar Measurements and weight Dimensions: 6,07 x 1,92 x 2,01 m Machine weight: 6500 kg Further information: 👉 Fully electric machine offering maximum precision, lowest energy consumption and highest process stability his machine belongs to the proven AX series from KraussMaffei, known for its robust design, high performance, and reliability in industrial production. With a clamping force of 180 tons, the machine is ideally suited for a wide range of technical plastic applications, including automotive, packaging, and general industrial parts. Key features: * Solid and durable construction for long-term operation * High injection performance and process stability * Reliable KraussMaffei MC5 control system * Suitable for continuous industrial use * Good availability of spare parts The machine is equipped with a KraussMaffei linear robot (LRX-S100), which allows efficient and automated part handling, increasing productivity and reducing cycle times. Iedpfjw E E Evsx Afuoih Thanks to its well-balanced performance and flexibility, this machine represents a very attractive solution for both technical parts and series production. The machine was manufactured in 2011 and appears to be in good working condition, as shown in the pictures.

Condition: excellent (used), Year of construction: 2014, operating hours: 47,137 h, functionality: fully functional, machine/vehicle number: 61020607, clamping force: 1,300 kN, clearance between the columns: 470 mm, Here we, as dealers in injection moulding machines, offer the following well-maintained used injection moulding machine for sale. Of course, we also purchase well-maintained injection moulding machines from model year 2010 onwards. We have been wholesalers of used injection moulding machines for over 25 years. Important current notice – Tax information and benefit for used machines: From 01.07.2025, used machines will also be eligible for a special tax depreciation of 30% per year. In addition to the lower price compared to a new machine, you can claim the same depreciation amounts as for a new machine. Keyword: Growth booster (§ 7 paragraph 2 EStG-E). Manufacturer: Krauss Maffei Model: KM 130 750-130 CXV BluePower 2-color 2-component machine Control system: MC6 Year: 2014 Machine no.: 61020507 Operating hours: 47,137 h Complete maintenance records for the last 7 years / 25,000 operating hours 1st injection unit 750 horizontal Screw diameter: 50 mm Injection volume: 393 ccm Shot weight: 357 g Heating capacity: kW Heating zones: 5 Nozzle stroke: mm Injection pressure: 1,892 bar 2nd injection unit 180 vertical Screw diameter: 30 mm Injection volume: 85 ccm Shot weight: 77 g Injection pressure: 2,500 bar Clamping unit Clamping force: 130 t / 1,300 kN Opening stroke: 600 mm Tie bar spacing: 470 x 470 mm Plate size: 745 x 770 mm Max. daylight: 900 mm Min. mould installation height: 300 mm Ejector stroke: 150 mm / ejector force: 23 kN Dimensions: 4.39 x 1.61 x 4.01 m Weight: 9,000 kg Extras – complete machine data sheet attached as PDF document Nozzle side: Needle shut-off A+C 1 x hydraulic core pull 1 x pneumatic core pull 1 x air blast Ejector side: 1 x hydraulic core pull 3 x pneumatic core pulls 1 x air blast Water BGS: 6 circuits each on nozzle and ejector side BluePower technology: up to 40% energy savings The machine is in excellent condition and can be inspected under power. Iisdpoyf Uy Ujfx Afujh Any peripheral devices shown are NOT included in the offer! The machine is available immediately. Free loaded onto buyer’s truck or delivered free to destination against reimbursement of freight costs. For information about the machines we offer and our company: - We only sell our own machines, purchased from ongoing production, from our warehouse in Hanover - All machines offered are inspected and tested prior to dismantling - We do NOT sell insolvency assets – we are NOT intermediaries trading in third-party property - All machines offered come from successful companies for whom regular maintenance is a given - All offered machines are available for viewing at our warehouse

Condition: new, PILOUS Dual-mitering bandsaw ARG 235 plus Includes special accessories: Powered chip brush, belt tension indicator Cutting range: Round: 90° - 45° + 45° + 60° in mm: 235-165-185-115 Square: 90° - 45° + 45° + 60° in mm: 230-145-160-80 Rectangle: 90° - 45° + 45° + 60° in mm: 280 x 180 - 185 x 80 - 185 x 100 - 115 x 80 Main motor: 400 V, 50 Hz, 1.4 kW Pump motor: 400 V, 50 Hz, 0.05 kW Saw blade speed: 40/80 m/min. Saw band length: 2710 x 27 x 0.9 mm Working height from the clamping jaw: 900 mm Coolant tank: approx. 15 l Machine dimensions (min.): 1640 x 750 x 1400 mm Machine dimensions (max.): 1930 x 1610 x 2000 mm Machine weight: 295 kg Iedpfx Afsilqh Eeueih