Used Ima Combima for sale (144)

Condition: good (used), Year of construction: 2014, An IMA feeding system is for sale. Ibjdpfxsqwn E Hs Alisa Machine is available immediately. Year 2014

Condition: used, Milling and chamfering unit Manufacturer: IMA - for double-sided edge banding machine (1 unit on the left side / 1 unit on the right side) Iodpfx Alebxp Nujieba

Condition: used, 2 units available. Please refer to the attached photos for more information. Ijdpfx Asd Tmabslioba

Condition: not inspected (used), Year of construction: 2014, functionality: unexamined, workpiece height (max.): 60 mm, edge thickness (max.): 20 mm, feed rate X-axis: 30 m/min, controller model: ICOS OPEN, The machine has the following configuration: Unit: Pre-milling Manufacturer model: 08.379 Motor power: 4 kW Speed: 8,800 rpm Unit: Cut-off saw unit Manufacturer model: 08.42 / 30 / B Number of motors: 2 Motor power: 0.660 kW Unit: Corner rounding unit Manufacturer model: 08.055 Number of motors: 2 Motor power: 1.850 kW Speed: 12,000 rpm Unit: Profile trimming unit Manufacturer model: SKF-L Number of motors: 4 Max. machining speed: 20 m/min Motor power: 0.180 kW Speed: 12,000 rpm Unit: Scraper blade unit Manufacturer model: 08.519 Unit: Glue scraper unit Manufacturer model: 08.521 Unit: Brushing unit Manufacturer model: 08.617-2 Number of motors: 2 Motor power: 0.180 kW Speed: 1,400 rpm TECHNICAL DETAILS Min. panel height: 8 mm Max. panel height: 60 mm Min. panel length: 150 mm Min. panel width: 65 mm Min. edge thickness: 0.3 mm Max. edge thickness: 20 mm Max. feed speed: 30 m/min Ibedpfx Aeyzy Iwsliea MACHINE DETAILS Control: ICOS OPEN EQUIPMENT Magazine for coil material Tank for hot-melt adhesive Edge pressure roller unit Pressure by rubberized belt The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and technical/commercial documents of descriptive character. The buyer has the right to inspect the goods prior to collection and assumes responsibility for the installation, securing, and operation of the machine at the destination. External reference: 6089

Condition: excellent (used), SINGLE-SIDE EDGE BANDER (LEFT-side) Edges (band in rolls) thickness (Min/Max) mm 0,3 - 3 Panels thickness (min/max) mm 8 - 60 Numerical Control ICOS open compact Feeding speed (adjustable) m/min 6 - 30 Top pressure system with rubber belt, Spraying unit (Anti-sticking liquid) Automatic and accurate Panels in-feed system Mod. A1 / 15 In-feed fence, adjustable by N.C. Panels in-feed system Bar Code Reader Pre-milling Unit (vertical joint trimmers) by N.C. 08.379 (2 x Kw 4,0) Lamps to heat the workpieces side Ibjdpfxeltmnlo Alioa Glueing Unit (P.U.R. Glue + Quick Melt system) VTG + 283.203 Band Pressure zone. Height adjustment of the band by N.C. Edge coils supporting unit (reels N°) 12 Snipping (end-cutting) unit 08.42 / 30 / B (Kw 0,66 x 2) (PNEU 0°-25°) 30m / min Rough Trimming unit 08.0555 (Kw 1 x 2) Fine Trimming unit (Multi-profile, by N.C.) 08.0587 (Kw 0,66 x 2) 4 PROFILES HSK 25 Spraying Unit (for sliding liquid) Multi-Profile Copying unit by N.C (fine and contour trimming) KFA 30 (Kw 0,5 x 1) 30m/min Profile edge scraping unit (Multi-profile, by N.C.) 08.516 (4 PROFILES) Glue scraping unit 08.521 Spraying Unit (for polishing liquid) Buffing unit 08.617 (Kw 0,25 x 4). Free space Milling grooving unit 08.190 (Kw 4,5 x 1)

Condition: excellent (used), SINGLE SIDE EDGE BANDER (Left) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Edges thickness in stips / lippings (min/max) mm 3 / 12 Panels thickness (min/max) mm 8 / 60 Numerical Control ICOS open TS Feeding speed (adjustable) m/min 4 - 20 Top pressure system with rubber belt Spraying unit (Anti-sticking liquid) In-feed fence, adjustable by N.C. Pre-milling Unit (vertical joint trimmers) 08.379 (2 x kW 4,0) Ibjdpfx Aod Nt N Helioa Glueing Unit (Hot Melt Glue & PUR-Glue) 283.1513 Band Pressure zone (N.C. adjustment) Edge coils supporting unit (reels) No. 1 Snipping (end-cutting) unit 08.415 (2 x kW 0,66) Rough Trimming unit 08.055 (2 x kW 1,0) Copying unit by N.C (fine and contour trimming) SKF-L (2 x kW 0,18) +(2 x kW 0,4) Profile edge scraping unit 08.519 Glue scraping unit 08.521 Buffing unit 08.617-2 ( 2 x kW 0,18) Milling grooving unit 08.190 (1 x Kw 4,5) 90°-180°-270° OPTIONAL: Panels in-feed system 65.152 (Sliding table, mm 500 x 500) Panels Return System "GELDMEIER" Mod. ? (code Z02009)

Condition: excellent (used), SINGLE-SIDE EDGE BANDER (LEFT-side) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Panels thickness (min/max) mm 8 / 60 Numerical Control ICOS Open Feeding speed (adjustable) m/min 16 - 30 Top pressure system with rubber belt Ibsdpfxod Scyds Alioa Spraying unit (Anti-sticking liquid) In-feed fence, adjustable by N.C. Pre-milling Unit (vertical joint trimmers) 08.379 (2 x Kw 4,0) adjustable by N.C. Glueing Unit (P.U.R. Glue + Quick Melt system) VTG + 283.203 Band Pressure zone + Edge coils supporting unit (No. 6 reels) Snipping (end-cutting) unit 08.42/30/B (Kw 0,2 x 2) speed 30 m/min (0°-25°) Fine Trimming unit 08.0587 (Kw 1.0 x 2) 4 profiles Multi Function Unit (Profile contour Trimming unit) KFA 20 (Kw 0,5 x 1) max 25 m/min Profile edge scraping unit 08.516 (4 profiles) Glue scraping unit 08.521 Spraying Unit (for polishing liquid) Buffing unit 08.617-4 (Kw 0.18 x 4) Milling grooving unit 08.190 (1 x Kwv 4,5) CNC (90° / 180° / 270°) CNC

Condition: excellent (used), To apply bands on edges of straight, round and shaped workpieces - Manual feeding of the workpieces - With glue tank and glue spreading roller - With coil/reel holding table - Min/Max thickness of the workpieces mm 16 / 40 - Edge tickness range mm 0.4 to 3 Ibodpehgbfajfx Alija - Tiltable table 0°-45° - Total installed power KW 4 (ca.)

Condition: excellent (used), SINGLE-SIDE EDGE BANDER (LEFT-side) Edges (band in rolls) thickness (Min/Max) mm 0,3 - 3 Edges thickness in stips / lippings (min/max) mm 3 - 12 Panels thickness (min/max) mm 8 - 60 Numerical Control ICOS open TS Feeding speed (adjustable) m/min 4 - 20 Top pressure system with rubber belt Spraying unit (Anti-sticking liquid) Pre-milling Unit (vertical joint trimmers) 08.376 (2 x Kw 3) Glueing Unit (Hot Melt Glue) 283.1513 Band Pressure zone Edge coils supporting unit (reels N°) 1 Snipping (end-cutting) unit 08.415 (2 x Kw 0,66) Iodpfxeflc Uhe Alisba Fine Trimming unit 08.055 (2 x Kw 1) 0°-30° Multi Function Unit (Profile contour Trimming unit) 08.342 (2 x Kw 0,66) Profile edge scraping unit 08.519 Glue scraping unit 08.50 Buffing unit 08.612 (2 x Kw 0,25) Free space

Condition: as good as new (ex-display), SINGLE-SIDE EDGE BANDER (LEFT-side) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 - in stips / lippings mm max 1 Panels thickness (min/max) mm 8 / 60 (Laser - max 44) Numerical Control ICOS Open Feeding speed (adjustable) m/min 16 - 30 Top pressure system with rubber belt Spraying unit (Anti-sticking liquid) In-feed fence, adjustable by N.C. Panels in-feed system 700.101 (mm 500 x 500) Pre-milling Unit (vertical joint trimmers) 08.379 (2 x Kw 4,0) adjustable by N.C. Glueing Unit (P.U.R. Glue + Quick Melt system) 04.0836 + 283.1518 (SERVO-MOTOR band feed) adjustable by CN Glueing Unit (Thermofusion with Laser) Laser System IMALUX Spraying Unit (for anti-release liquid) Band Pressure zone + Edge coils supporting unit (No. 6 reels) Snipping (end-cutting) Linear 08.428 LKA V30/2(Kw 0,2 x 2) work speed up to 30 m/min (0°-25°) Fine Trimming unit (Multi-profile, by N.C.) 08.0587 (Kw 1.0 x 2) 4 profiles Multi-Profile Copying unit by N.C (fine and contour trimming) KFA 20 (Kw 0,5 x 1) max 25 m/min Profile edge scraping unit DUO (4 profiles) Glue scraping unit 08.521 Spraying Unit (for polishing liquid) Buffing unit 08.617-4 (Kw 0.18 x 4) Iodpfx Asgbug Njlieba Milling grooving unit 2 x 08.190 (Kw 4,5 x 2) swivelling 90°/180°/270° (adjustable by CN)

Condition: excellent (used), C.N.C. WORKING CENTER with 4 axes (X-Y-Z-C) for routering, boring, cutting and edge banding Numerical Control IMATRONIC 231 (IMAWOP) Max useful working area (without edge banding process) mm 5000 x 1630 x 100 Max useful working area (edge banding process) mm 3900 x 1450 x 60 (panel thickness) No. 8 movable rails (supports) length mm 1200 LED displaying both the axe X and axe Y position Ibodpfx Aljfbmqtoisa Vacuum cups (with No. 1 vacuum pump, capacity 140 m3/h) Safety side metal grids and front emergency carpets Motorized belt to evacuate the wastes from the working process No. 2 Vertical Electro-spindles HSK F63 (1 x Kw 11 + 1 x Kw 7,5) Automatic Tools Changing System, with 18 folds (places) No. 21 Independent vertical boring spindles (4 x Kw 1,2) No. 6 Independent horizontal boring spindles (1 x Kw 3) Banding group on board - Glueing Unit (Hot Melt Glue) VT 50 Edge coils supporting unit (No. 6 reels) OPTIONALS: No. 1 Circular Saw to cut and for grooving - max diam mm 200 (90°) No. 1 Aggregate Flush-Trimming/Scraping Unit No. 1 Cross aggregate with No. 4 horizontal boring spindles

Condition: excellent (used), SINGLE-SIDE EDGE BANDER (LEFT-side) Edges (band in rolls) thickness (Min/Max) mm 0,3 - 3 Edges thickness in stips / lippings (min/max) mm 3 - 12 Panels thickness (min/max) mm 8 - 60 Numerical Control ICOS open TS Feeding speed (adjustable) m/min 4 - 20 Ijdpfod Nuu Hsx Alisba Top pressure system with rubber belt Spraying unit (Anti-sticking liquid) Pre-milling Unit (vertical joint trimmers) 08.376 (2 x Kw 3) Glueing Unit (Hot Melt Glue) 283.1513 Band Pressure zone Edge coils supporting unit (reels N°) 1 Snipping (end-cutting) unit 08.415 (2 x Kw 0,66) Fine Trimming unit 08.055 (2 x Kw 1) 0°-30° Multi Function Unit (Profile contour Trimming unit) 08.342 (2 x Kw 0,66) servo Profile edge scraping unit 08.519 Glue scraping unit 08.50 Buffing unit 08.612 (2 x Kw 0,25) Free space

Condition: excellent (used), SINGLE-SIDE EDGE BANDER (LEFT-side) Edges (tape) thickness in rolls (min/max) mm 0,3 - 3 Edges thickness in stips / lippings (max) mm 1 Panels thickness (min/max) mm 8 - 60 Numerical Control ICOS Open Compact Feeding speed (adjustable) m/min 6 - 30 Top pressure system with rubber belt Spraying unit (Anti-sticking liquid) In-feed fence, adjustable by N.C. Pre-milling Unit (vertical joint trimmers) by N.C. 08.378 (2 x Kw 4,5) Lamps to heat the workpieces side Glueing Unit (Hot Melt + Quick Melt Unit) 04.1570 Spraying Unit (for anti-release liquid) Band Pressure zone + Edge coils supporting unit (N. 16 reels) Ibjdpfx Aem Udfwjlisa Snipping (end-cutting) unit 08.42/30/B (2 x Kw 0,66 - Pneu 0° - 25°) 30 m/min Fine Trimming unit (Multi-profile, by N.C.) 08.0587 (2 x Kw 1) + Spraying Unit (for sliding liquid) Multi-Profile Copying unit by N.C (fine and contour trimming) KFA 30 (08.355 - 1 x Kw 0,5) 30 m/min Corner Rounding unit (Contour Trimming) 08.604 with 4 brushes (4 x Kw 0,25) Profile edge scraping unit (Multi-profile, by N.C.) 08.516 Glue scraping unit 08.521 Spraying Unit (for polishing liquid) + Buffing unit 08.617-4 (4 x Kw 0,18) Smoothing unit with spheres 08.53

Condition: excellent (used), SINGLE-SIDE EDGE BANDER (LEFT-side) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Edges thickness in strips / lippings (min/max) mm 0,8 / 20 Panels thickness (min/max) mm 8 / 60 Numerical Control ICOS Open Compact Feeding speed (adjustable) m/min 6 - 30 Top pressure system with rubber belt In-feed fence, adjustable by N.C. Pre-milling Unit (vertical joint trimmers) by N.C. 08.376 (Kw 4,5 x 2) Lamps to heat the workpieces side Glueing Unit (Hot Melt Glue + Quick Melt system) 283.1513 + 283.201 Band Pressure zone Edge coils supporting unit (reels N°) 1 Snipping (end-cutting) unit 08.42 (Kw 0,66 x 2) 0°-25° - max 30 m/min, Ibjdpfjidqphox Alisa Fine Trimming unit 08.055 (Kw 1,85 x 2) 0°-30° Spraying Unit (for sliding liquid) Multi-Profile Copying unit by N.C (fine and contour trimming) 08.348 (KW 0,66 x 2) 4 profiles Profile edge scraping unit 08.516 (4 profiles) Glue scraping unit 08.50 Spraying Unit (for polishing liquid) Buffing unit 08.612- 2 (Kw 0,25 x 2) Milling grooving unit 08.183 (Kw 3 x 1)

Condition: excellent (used), C.N.C. WORKING CENTER with 4 axes (X-Y-Z-C) for routering, boring, cutting and edge banding Goose-neck type, with Numerical Control ICOS-Open. Software IMAWOP + IMAwinCAD Working table with pods and rails. No. 6 Supports (rails) of lenght mm 1450 - DYNAPOINT Automatic deplacement by CNC (X axis) of the Supports/rails Automatic deplacement by CNC (Y axis) of the vacuum pods/cups Automatic Tools Changing System. Tools storage plate (No. 18 folds- positions) Max. useful working area (X - Y - Z) mm 6300 x 1450 x 100 Min. workpieces dimensions (X - Y - Z) mm 320 x 115 x 14 Max. workpieces dimensions (X - Y - Z) mm 5600 x 2100 x 38 Motorized carpet to evacuate chips and wastes Separate electric and command cabinet. Total installed power (Kw) 34 WORKING GROUPS (TOP): Vertical electro-spindle 1 x HSK F63 - electro-spindle motor power Kw 18 (S6) Circular Grooving Saw (90°) diam. (mm) 200 Edge Banding unit (always ready on board) - VT 100 Edge coils supporting unit (No. 2 reels) Combined aggregate (Flush-Trimming/Scraping) Workpieces Infeed system (to the Bima Cut) with Brush Table N° 6 Clamps to fix the panel and move it on to the machine (on top of the vacuum pods) Workpieces Outfeed (from Bima Cut) With motorized Rollers + Angular Transfer System Iedjtixpuepfx Alioba

Condition: excellent (used), SINGLE-SIDE EDGE BANDER (LEFT-side) Edges (tape) thickness in rolls (min/max) mm 0,3 / 3 Veneer edges limited possible up to max. 1.0 mm Panels thickness (min/max) 8 mm. 40 mm (with MFA) / 60 mm (without MFA) Numerical Control / Software ICOS Open Adjustable feeding speed (m/min ) 6 - 30 Top pressure system with driven rubber belt Spraying unit (Anti-sticking liquid) In-feed fence Pre-milling Unit (vertical joint trimmers) 08.378 (2 x Kw 4,5) Glueing Unit (Hot Melt glue) 04.1570 Iodpfx Aljr Ttfleieba Pressure zone Edge coils supporting unit (No. of reels) 2 Snipping (end-cutting) unit 08.42/30/B (2 x Kw 0,66) 0°-25° (max 30 m/min) Fine Trimming unit 08.055 (2 x Kw 1) 0°-30° Multi Function Unit (Profile contour Trimming unit) by N.C. 08.342 (2 x Kw 0,66) servo Profile Scraping unit 08.519 Glue scraping unit 08.50 Buffing unit 08.617 (2 x Kw 0,25) Milling grooving unit 08.190 (1 x Kw 4,5)

Condition: excellent (used), SINGLE-SIDE EDGE BANDER (LEFT-side) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Edges thickness in stips / lippings (min/max) mm 0.8 / 20 Panels thickness (min/max) mm 8 / 60 Numerical Control ICOS Open Feeding speed (adjustable) m/min 6 - 30 Top pressure system with rubber belt Safety and sound-proof enclosures/cabins Ibsdpfxoyk Tkve Alisa OPTIONAL: Panels in-feed system 63.152 (mm 500 x 500) In-feed fence, adjustable by N.C. Pre-milling Unit (vertical joint trimmers) 08.379 (2 x Kw 4,0) adjustable by N.C. Glueing Unit (EVA Glue) 283.1513 Band Pressure zone + Edge coils supporting unit (No. 1+2 reels) Snipping (end-cutting) unit 08.42/30/B (Kw 0,66 x 2) speed 30 m/min (0°-25°) Fine Trimming unit 08.055 (Kw 1,85 x 2) 0°-25° Multi Function Unit (Profile contour Trimming unit) SKF-L (2 x Kw 0,18) + (2 x Kw 0,4) Profile edge scraping unit 08.519 Glue scraping unit 08.521 Spraying Unit (for polishing liquid) Buffing unit 08.617-2 (Kw 0,18 x 2)

Condition: excellent (used), C.N.C. WORKING CENTER (POINT TO POINT) with 5 axis (X-Y-Z-C-5th) for routering, boring, cutting and edge banding Numerical Control ICOS CNC (IMAWOP) Max useful working area (without edge banding) mm 4000 x 1600 (2000) x 100 (axe Z stroke mm 650) Max useful working area (edge banding process) mm 4000 x 1600 x 100 (panel thickness) No. 8 movable rails (supports) length mm 1400, LED displaying both the axe X and axe Y position Vacuum cups (with No. 2 vacuum pumps, capacity 140 m3/h each) Safety side metal grids and front emergency carpets Motorized belt to evacuate the wastes from the working process Ibsdpfx Alow A Ruqeioa No. 1 Vertical Electro-spindle ROBOTKOPF HSK F63 (Kw 16) Automatic Tools Changing System, with 18 folds (places) No. 21 Independent vertical boring spindles (4 x Kw 1,2) No. 8 Independent horizontal boring spindles (4 in X + 4 in Y) Circular Saw (tiltable 0°- 90°) diam. (mm) 200 Glueing Unit (P.U.R. Glue + Quick Melt unit 283.203) VT 100 / 100 WITH 45° INCLINED EDGE BANDING UNIT Edge coils supporting unit (No. 2 reels) OPTIONALS: No. 1 Aggregate Flush Milling / Trimming No. 1 Aggregate Flush-Trimming / Profile Scraping Unit

Condition: excellent (used), SINGLE-SIDE EDGE BANDER (LEFT-side) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 - in stips / lippings mm max 1 Panels thickness (min/max) mm 14 / 60 (LASER - Max 50) Numerical Control ICOS Open Feeding speed (adjustable) m/min 6 - 30 Top pressure system with rubber belt Spraying unit (Anti-sticking liquid) In-feed fence, adjustable by N.C. Panels in-feed (servo) system A1 / 15 Pre-milling Unit (vertical joint trimmers) 08.378 (2 x Kw 4,5) adjustable by N.C. Glueing Unit (P.U.R. Glue + Quick Melt unit) 283.201 + 283.203 Glueing Unit (Thermofusion with Laser) Laser System LASERLINE Spraying Unit (for anti-release liquid) Ibedji Hn Srjpfx Aliea Band Pressure zone + Edge coils supporting unit (No. 36 + 12 reels) Snipping (end-cutting) 08.42 (Kw 0,2 x 2) work speed up to 30 m/min (0°-25°) Rough Trimming unit 08.0555 HS/LS1 (Kw 1 x 2) Fine Trimming unit (Multi-profile, by N.C. adjustment, for 4 profiles) 08.0587 (Kw 0,66 x 1) Multi-Profile Copying unit by N.C (fine + contour trimming) KFA 30 (Kw 0,5 x 1) max 30 m/min Profile Scraping unit (Multi-profile, by N.C. adjustment, for 4 profiles) 08.0516 Glue scraping unit 08.521 Spraying Unit (for polishing liquid) Buffing unit 08.614 (Kw 0.25 x 4) No. 2 Milling grooving units 08.190 (Kw 4,5 x 2) swivelling 90°/180°/270° (adjustable by CN)

Condition: excellent (used), FLEXIBLE SYSTEM OF SINGLE-SIDE SIZING-EDGEBANDING (BATCH SIZE ONE) Composed of the following machines: M.01) PANELS HANDLING and RETURN SYSTEM "SIRIO" BATCH SIZE ONE M.02) SINGLE-SIDE RIGHT-HAND SIZE-EDGE BANDER "IMA" Novimat /I/R75/690/R3 Panels thickness (min/max) mm 8 / 60 - Working width (min/max) mm 200 / 1300 Edges (tape) thickness in rolls (min/max) mm 0,3 / 3 Numerical Control / Software ICOS Open (Batch Size One) Adjustable feeding speed (m/min ) 6 - 30 Panels in-feed system A1 / 15 N° 2 Pre-milling Unit (vertical joint trimmers) adjustable by N.C. 08.378 (4 motors x Kw 4,5) Glueing Unit (Hot Melt + Quick Melt Unit) VTG + 283.205 Edge coils supporting unit (No. 24 reels) Snipping (end-cutting) unit 08.42 / 30 / B / LS1 (2 x Kw 0,2) 0°-25° Rough Trimming unit 08.055.0.1680 (1 x Kw 0,85) Fine Trimming unit (Multi-profile, adjustable by N.C.) 08.0587 HS/LS1 (2 x Kw 1) Multi-Profile Copying unit by N.C. (fine and contour trimming) KFA x20 (1 x Kw 0,5) 20 m/min Profile Scraping unit (Multi-profile, adjustable by N.C.) 08.516 HS/LS1 Glue scraping unit 08.521 Iodpfxekt Uuao Alisba Buffing unit 08.617-2 (2 x Kw 0,18) N° 3 Milling grooving unit 08.190 (3 x Kw 4,5) Controlled by N.C. - (90°/180°/270°) M.03 ) PORTAL BRIDGE (UNLOADING/LOADING) "SIRIO"

Condition: excellent (used), C.N.C. WORKING CENTER with 4 axes (X-Y-Z-C) for routering, boring, cutting and edge banding Numerical Control ICOS CNC (IMAWOP) Max useful working area (without edge banding process) mm 3100 x 2000 x 100 Max useful working area (edge banding process) mm 3100 x 1925 x 60 (panel thickness) No. 6 movable rails (supports) length mm 1400 LED displaying both the axe X and axe Y position Vacuum cups (with No. 1 vacuum pump, capacity 250 m3/h) Safety side metal grids and front emergency carpets No. 1 Vertical Electro-spindle HSK F63 ( Kw 18) Automatic Tools Changing System, with 18 folds (places) No. 14 Independent vertical boring spindles (2 x Kw 1,2) Aggregate Boring Unit, "cross" shape, with 4 horizontal spindles + Circular saw (diam. mm 125) Banding group on board - Glueing Unit (Hot Melt Glue) VT 100 Edge coils supporting unit (No. 2 reels) OPTIONALS: No. 1 Aggregate "FLEX 5" Mod. VARIO NC No. 1 Aggregate Flush Milling / Trimming Ibodoq Nmutjpfx Alija No. 1 Aggregate Flush-Trimming / Profile Scraping Unit No. 1 Bar Code Reader

Condition: excellent (used), C.N.C. WORKING CENTER with 5 axes (X-Y-Z-C-5) routering, boring, cutting and edge banding Goose-neck machine - Front emergency carpets Safety cabin (enclosure) of the working head Numerical Control Type ICOS CNC - Software IMAWOP Working table with pods and rails (No. 8 rails x mm 1400) LED system (on the rails) for the vacuum pods positioning Automatic Tools Changing System (Store with No. 18 positions) Useful working area (X - Y - Z) mm 4000 x 2100 x 300 Useful working area (X -Y - Z) in edge banding mm 4000 x 1800 x 60 Nr. 2 Working areas - Vacuum pump / capacity (m3/h) 140 Motorized carpet to evacuate the wastes from the working process Separate electric and command cabinet - Total power installed Kw 32 Working group (top head) Nr. 21 Independent vertical boring spindles (4 X Kw 1,2) Nr. 1 Vertical Electro-spindle HSK F63 ROBOT (Kw 16) Edge Banding group (ready on board) with Glueing Unit (Hot Melt) VT 100 Edges (tape) thickness in rolls (min/max) mm 0,4 / 3 Edge coils supporting unit (Nr. 2 reels) Ijdohu U Nxspfx Alioba OPTIONALS: Circular saw aggregate (diam. mm 200) Combined aggregate (Flush-Trimming/Scraping) Drilling Aggregate (with 4 horizontal boring spindles)

Condition: refurbished (used), SINGLE SIDE EDGE BANDER (Left) Edges (band in rolls) thickness (Min/Max) mm 0,3 - 3 Edges thickness in stips / lippings (min/max) mm 3,0 - 12,0 Panels thickness (min/max) mm 8 - 60 Numerical Control ICOS Feeding speed (fixed) m/min 16 Top pressure system with rubber belt Spraying unit (Anti-sticking liquid) Pre-milling Unit (vertical joint trimmers) 08.376 (2 x kW 3,0) Lamps to heat the workpieces side Glueing Unit (Hot Melt Glue) 283.1513 Band Pressure zone Edge coils supporting unit (reels N°) 1 Snipping (end-cutting) unit 08.415 (2 x kW 0,66) Fine Trimming unit 08.055 (2 x kW 1) - 30° Multi Function Unit (Profile contour Trimming unit) 08.346 (2 x kW 0,66) Profile edge scraping unit 08.519 Glue scraping unit 08.50 Spraying Unit (for polishing liquid) Buffing unit 08.612 (2 x kW 0,25) Free space Ibodpsdfgfpjfx Aliea

Condition: ready for operation (used), Year of construction: 1999, functionality: limited functionality, IMA Postforming, year of manufacture 1999 The melting adhesive units for surface and corner gluing are not included. The machine offered is being sold as a used unit. The sale is made under exclusion of any liability for material defects. The machine is sold as inspected and without any warranty. The seller does not provide any guarantee for functionality, performance, or suitability for any particular purpose. Disclaimer Any liability for material defects is excluded. This does not apply to damages resulting from injury to life, body, or health, or in cases of intentional or grossly negligent behavior on the part of the seller. Ibsdpfoywfifjx Alioa Dismantling and Transport Dismantling of the machine is to be carried out by the buyer at their own responsibility and expense. The buyer bears all costs and risks related to dismantling, loading, and transport. Transfer of Risk Risk passes to the buyer at the latest with the start of dismantling or loading. Miscellaneous No liability is assumed for hidden defects. All information regarding the machine (e.g. year of manufacture, operating hours, technical data) is provided to the best of our knowledge, however, without guarantee.

Condition: excellent (used), SINGLE-SIDE EDGE BANDER (LEFT-side) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Edges thickness in stips / lippings (min/max) mm 0.8 / 20 Ibsdpfx Ajyxl Siolija Panels thickness (min/max) mm 8 / 60 Numerical Control ICOS Open Feeding speed (adjustable) m/min 6 - 30 Top pressure system with rubber belt Safety and sound-proof enclosures/cabins OPTIONAL: Panels in-feed system 63.152 (mm 500 x 500) In-feed fence, adjustable by N.C. Pre-milling Unit (vertical joint trimmers) 08.379 (2 x Kw 4,0) adjustable by N.C. Glueing Unit (EVA Glue) 283.1513 Band Pressure zone + Edge coils supporting unit (No. 1+2 reels) Snipping (end-cutting) unit 08.42/30/B (Kw 0,66 x 2) speed 30 m/min (0°-25°) Fine Trimming unit 08.055 (Kw 1,85 x 2) 0°-25° Multi Function Unit (Profile contour Trimming unit) SKF-L (2 x Kw 0,18) + (2 x Kw 0,4) Profile edge scraping unit 08.519 Glue scraping unit 08.521 Spraying Unit (for polishing liquid) Buffing unit 08.617-2 (Kw 0,18 x 2)