Used Ima Combima for sale (134)

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, Single-Sided Narrow Edge Bander IMA NOVIMAT / CONTOUR / I / G80 / 790 / L20 with Servo Unit for Corner Copying MFA Year of Production: 2009 Condition: Very good Features: * Stable machine frame with mounted processing units * Electronically adjustable feed speed: 6–30 m/min (feed rate of processing units is not synchronized with full feed adjustment) * Feed chain guided in sliding rails with plastic pads and 80 mm wide rubber lining * Automatic lubrication of feed chain controlled by the machine program * Upper pressure roller: double V-belt, 70 mm wide, on ball-bearing rollers; electronically adjustable * CE-compliant machine safety * Noise-reducing and protective covers * Edge banding unit with drive enclosed in sealed oil bath and glue pot (1 main pressure roller + 5 auxiliary rollers); Quick-Lock pneumatic glue pot system for fast replacement * Touchscreen display * End trimming saw unit for cutting excess edge at front and rear corners, including: pneumatic saw adjustment 0–25°, straight cuts, corner chamfering, automatic saw positioning for two edge thicknesses (e.g., 0.4 and 1.2 mm), and excess edge adjustment for corner copying * All processing units equipped with chip extraction * Novimat Contour series maintains high processing quality due to powerful corner copying unit and minimal spacing between workpieces (\~300 mm) Basic Technical Data: Bcedpfxjw R S Slj Aa Est * Roll edge thickness: 0.3–3 mm * Paper, PVC, and ABS edges: 0.3–3.0 mm * Veneer: 0.5–3.0 mm * Wooden strips: 0.8–20 mm * Edge height: 14–65 mm * Maximum top edge overhang: * Up to 8 mm thickness: 5 mm * Over 8 mm thickness: 2 mm Workpiece Dimensions: * Minimum length (feed direction): 150 mm * Minimum width (for thickness ≤25 mm): 65 mm * Minimum thickness: 8 mm (without flat planer) / 12 mm (with flat planer) * Maximum thickness: * Without corner copying: 60 mm * With corner copying: 40 mm * Smallest workpiece: 150 × 150 mm or 65 × 300 mm (\*65 mm width for max thickness 25 mm) Machine Parameters: * Electronically controlled feed: 6–30 m/min (may be limited by individual units) * Workpiece protrusion beyond feed chain: * 38 mm (edge thickness 0.3–8 mm) * 30 mm (edge thickness 8.1–20 mm) Power Supply: * Voltage: 400/230 V, ±5/–10% with neutral * Frequency: 50 Hz * Control voltage: 230 V AC / 24 V * Compressed air: 8 bar * Extraction air speed: 28 m/s

Condition: used, Year of construction: 2004, Used 75 Litre IMA Model VORTEX 075 stainless steel mixer granulator. Total bowl capacity 75 litre, working capacity approx. 20 - 50 litre. Has jacketed bowl. Main impeller driven by 3,0 kW motor. Chopper blade driven by approximately 1.5 kW motor. Bowl cover is opened using with pneumatic cylinder . Also has top mounted stainless steel dust filter. Side discharge outlet with pneumatically operated valve. Includes local control panels and main switchboard. Bjdpswm Atmsfx Aa Eoct

Condition: used, Year of construction: 2017, operating hours: 3,123 h, functionality: fully functional, machine/vehicle number: 50614, For sale: used IMA Advantage 400 edge banding machine. This unit features milling aggregates and a profile scraper operated by servomotors, all controlled via computer. Additionally, 3 sets of cleaning fluids are included. The machine has recently undergone maintenance – the glue tank was refurbished, and the feed chain blocks as well as the conveyor belt were replaced. The machine is operational, in constant use, and 100% functional. Current machine hours: 3,123. It has processed 628,910 linear meters. Bsdjww Htlspfx Aa Esct Feel free to contact me for further information or to purchase.

Condition: excellent (used), Year of construction: 2008, operating hours: 22,000 h, functionality: fully functional, feed length X-axis: 8,000 mm, feed rate X-axis: 20 m/min, total length: 8,600 mm, workpiece height (max.): 60 mm, total width: 1,700 mm, edge thickness (max.): 3 mm, total height: 1,850 mm, overall weight: 4,400 kg, compressed air connection: 7 bar, height adjustment type: electric, input voltage: 400 V, input current: 54 A, product height (max.): 60 mm, pressure: 7 bar, IMA ICOSTS control, touch panel, edge band magazine, 2x spraying devices, pre-milling unit, preheating zone, crosscut saw, straight and radius milling units, corner rounding unit, scraper unit, smoothing unit, polishing unit. Industrial machine in very good technical condition, kept in constant operational readiness. Operated in a single-shift system. The device has been used exclusively as a support unit during periods of increased order volume. A video of the machine in operation and additional photos can be provided to interested parties. Bsdpfx Aasxctwre Eoct

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, edge thickness (max.): 20 mm, controller model: IMATRONIC 121/01, TECHNICAL DETAILS Edge thickness, coil: 0.3 – 3 mm Edge thickness, strips/sheared pieces: 0.8 – 20 mm Panel thickness: 8 – 60 mm Motorised chain feed from below (variable): 6 – 30 m/min MACHINE DETAILS Electronic control: IMATRONIC 121/01 EQUIPMENT Levelling unit with NC adjustment 08.376: (4.5 kW × 2 at 9,000 rpm) Edge heating lamps: 1.5 kW × 2 Glue unit 283.1513: (hot-melt glue + preheater) with NC adjustment Glue unit 08.42: (0.66 kW × 2 at 12,000 rpm) Profiling group 08.0555: (1.85 kW × 2 at 12,000 rpm) Multifunctional unit 08.348: (0.66 kW × 2 at 12,000 rpm) Corner copy routers 08.519 Glue scraper group 08.50 Bcjdpfx Aasxf Ewve Eet Brushing unit 08.612: (0.25 kW × 2 at 1,500 rpm) Unit 08.181: (4.4 kW × 1 at 6,000 rpm) Belt sanding unit 08.062: (1.8 kW × 1 at 3,000 rpm) Upper pressure system with motorised rubber belt Entry fence with NC adjustment Pressure zone Roll holder with 1 roll Automatic end trimming tool change (cross system)

Condition: used, Year of construction: 2001, functionality: fully functional, Electronically controlled CNC processing center featuring: • Standard table Bedpfxowyvfco Aa Eoct • Safety mats • 1 vacuum pump, 100 m³/h • IMATRONIC-NT • Lateral safety grid, right-hand side • With door and left-hand front • Portable workstation for the assembly of fixing dowels and bolts Technical data: • Processing area with standard units X/Y: 6000/1200 mm • Max. clamping height from upper edge of vacuum clamping plate (Z1): 100 mm • Max. panel thickness (Z2): depending on application • Working table height approx.: 1000 mm • Alternative field area without cycle operation (X): 2 x 2650 mm Free space in the center (X): 700 mm • With cycle operation (X): 2 x 2250 mm Free space in the center (X): 1500 mm • Central lubrication • Power supply: 3/N/PE, 400/230 V • IMAwinCAD for BIMA machines including edgebanding • IMAWOP • Main spindle HSK F63, cone diameter 38 mm, 12 kW, water-cooled • 1 boring saw unit • 1 grooving saw unit • Edge gluing unit VT 61

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, 4-Axis Machining Center IMA BIMA 300 Year of Production: 2009 Technical Condition: Very good Technical Data: * Work Table: 4,300 × 1,250 mm * Supports and Suction Cups: 8 supports, total 24 suction cups * Main Spindle: 7.5 kW (max 11 kW), 1,500–18,000 rpm, HSK-F63 holder, cone diameter 38 mm * Tool Magazine: 18 positions, max tool weight 6 kg, max length 150 mm, tool diameter up to 100 mm (150 mm if adjacent slots are free) * Drilling Unit: IMA 14, 14 vertical spindles, 6 horizontal spindles, grooving saw Ø150 mm, 4,500–6,000 rpm, max drill diameter 35 mm * Tool Set: shank cutter Ø18×43/Ø25/110 mm, grooving saw Ø125/Ø30×4/12Z, drills Ø5–10 mm, HSK-F63 tool holder, tool basket * Vacuum Pumps: 2 × 90 m³/h * Protective Mats: operation in alternating mode, front access * Software: IMAWOP installed on the machine + 1 office license * Emergency Power Supply (UPS): computer power backup approx. 10 minutes * Control Cabinet Air Conditioner: ensures trouble-free operation above 35 °C * Main Spindle Horizontal Unit: cross head with 4 spindles, tool diameter 1–16 mm, speed up to 15,000 rpm * Maximum Feed Rates: X 60 m/min, Y 60 m/min, Z 30 m/min * Dust Extraction: central port Ø250 mm, air speed 28 m/s, according to connection diagram * Weight: approx. 5,500 kg * Compressed Air: connection ¾", pressure 6 bar, dry operation recommended with air dryer * Electrical Installation: main switch in a separate control cabinet; complete control cabinet with monitoring; all safety devices CE-compliant; typical cabinet dimensions: H 2,000 × W 1,200 × D 800 mm; power supply 400/230 V, 50 Hz * Working Environment: permissible ambient temperature +15…+35 °C (without cabinet air conditioner) CNC Control: * System: ICOS OPEN 321 (Polish language version) * Interpolation: simultaneous linear interpolation for 3 axes, 2½D circular interpolation on any two axes * Selected IMAWOP Functions: Bedpew R S Dnjfx Aa Ejct * Operation selection: drilling, milling, grooves * Graphic updates after corrections * Drilling time optimization * Graphical positioning of suction cups * Conditional and formula-based programming * Technological and tool databases * Alphanumeric names/descriptions up to 28 characters * Subprograms, manual input of machining sequences * Error/alert messages * Acceleration/deceleration control (accuracy 0.001 mm) * Automatic zeroing * Corrections from portable console Additional: IMAWOP machining program

Condition: used, Year of construction: 2011, functionality: fully functional, machine/vehicle number: L3B031, IMA MISTRAL Y 16 Bottle/Can Air Rinsing Machine – Used, Immediately Available Machine Data: Model: IMA MISTRAL Y 16 Type: Automatic Bottle/Can Air Rinsing and Extraction Machine Serial No.: L3B031 Year of Manufacture: 2011/2012 Manufacturer: IMA S.p.A. / IMA Swiftpack (Italy) Electrical Specifications: 220/380 V, 3 phases, 50 Hz Space Requirements: approx. 400 × 140 × 220 cm Description & Features: This rotary air rinsing machine is designed for pharmaceutical and medical applications, suitable for GMP-compliant internal cleaning of stable, round glass or plastic bottles using sterile compressed air. • Fully automatic bottle cleaning and extraction • Processes up to 200 containers per minute • Includes format parts for plastic bottles Ø 44 mm × height 95 mm • Additional formats included: Ø 40 × 55 mm, Ø 60 × 130 mm • Operation: Bottles are single-lane fed via conveyor and screw separator, transferred into a carousel, gripped by tongs, rotated 180°, and cleaned with nozzles (blowing) and extraction heads (suction). Bottles are then transferred to the conveyor for downstream processing. • Suitable for bottles and cans made of plastic and glass • High level of automation, GMP-compliant design Documentation & Manuals: • Operating manuals (German, English, Italian) • Electrical circuit diagrams • Layout drawings / guards layout • Spare parts catalog • Blowing diagram / electrical diagram • FAT and SAT documentation Bcodpfx Ajw Sfa Eea Eot • Machine and operator manual in German Scope of Supply: • Complete machine • Spare parts as per catalog • All original documentation (PDFs and printed documents) • Size parts for various bottle sizes Condition: • Used, from pharmaceutical production • Immediately ready for operation after installation • Available immediately Location: Çorlu, Turkey Price: On request

Condition: like new (used), Year of construction: 2021, operating hours: 22,000 h, functionality: fully functional, total length: 4,670 mm, total height: 1,690 mm, total width: 1,370 mm, input voltage: 400 V, overall weight: 1,400 kg, compressed air connection: 6 bar, air demand: 0.2 m³/h, - Installed on April, 2021 - End of use on November, 2023 (Approximately 2 years and 7 months use) - Store from December, 2023 with vinyl wrapping Ilapak's Delta 3000 horizontal flow wrap packaging machine is PC controlled and equipped with long dwell technology for modified atmosphere packaging (MAP) and Ilapak's unique high-speed hermetic sealing technologies to cover the widest range of applications. Its heavy duty and reliable design allows the Delta 3000 to be integrated in automatic packaging systems. All Delta 3000 horizontal flow wrap machines are also available in stainless steel and bottom film feeding versions. One of the most effective ways to extend the shelf life of fresh products is to pack them in a hermetically sealed pack with a modified atmosphere (MAP – Modified Atmosphere Packaging). Our robust Delta flow wrap machines are precisely engineered to ensure hermetic sealing at high speed. Thanks to the flexibility of its design, the Delta series of packaging machines are also ideally suited for non-food applications where a hermetically sealed pack is required, such as medical and personal care products like wet wipes. * Main Feature - Upgradable machine configuration - Long dwell sealing jaws technology - Separated electrical control - Electronic machine with commercial available components * Benefits - Possibility to expand & connect the machine with different feeding systems - To perform hermetic sealing and MAP applications while managing a wide range of wrapping material characteristics - Easy accessibility during maintenance operation - Higher reliability components - Easy maintenance * Technical Data - Capacity: 25 - 100spm based on 4 ~ 1 line stack - Modified Atmosphere: N₂/CO₂ Mixer including O2 analyzer - Dimension: 4,666mm(L) X 1,367mm(W) X 1,689mm(H) including infeed line - Power Supply Spec.: 3P, 400V, 50Hz, 7kVA - Air Supply Spec.: 6 bar, 0.2m³/h - Machine Speed: Up to 100 cycles per minute Production output depends on film sealability and product characteristics - Film Cut-off: Min 100mm - 4.0” / Max 1200mm - 47” Depending on film and product characteristics - Film Reel Max Weight: Depending on film reel width, up to 75 kg - 165 lbs - Electronic Platform: Industrial PC Bjdpfet Dg Itox Aa Eect