Ima bima for sale

Identified location: Ashburn (US) (Edit)
Enter your address
or
Move
9
Double-sided edge banding machine IMA COMBIMA grade edge + soft edge Machine is ready for use, also as spare parts are sold. Bzwcnlkc Agreggate per page: Saw that Swiss clamp Fräsagreggat (equal to u.Gegenlauf) Universal unit (top, bottom) Soft edges soft pressure zone glueing zone glueing zone grade edge Pressure zone 1coil + 2 rolls Cross-cut saws (front, rear) Fräsaggregatt (up/down) Scraper flat edge tape grinding unit edge profile unit edge profile unit from above Wrestling ... more
4

TORNIO CNC A 6 ASSI BIMANDRINO COMPLETO DI CARICABARRE - USATO - MORI SEIKI DL 151MC

Matelica (MC), ItalyItaly dealership location
7203 km
2001
ready for operation (used)
MAX ROTATING DIAMETER: 420 mm MAX TURNING LENGTH: 200 mm MAX TURNING DIAMETER: 150 mm BAR CAPACITY: 45 mm SPINDLE: 5000 rpm; 7,5 Kw; ASA 2-5 COUNTER SPINDLE: 5000 rpm; 7,5 Kw; ASA 2-5 DRIVEN TURRET HEAD: 12 + 12 POS CONTROL UNIT: MSC 501 Ste80s BAR FEEDER: IEMCA mod. MASTER 880P BAR LENGTH: 3300 mm BAR DIAMETER: 8-80 mm WEIGHT: 5800 Kg ACCESSORIES: SWARF CONVEYOR; PIECE CONVEYOR; PCMCIA SERIAL PORT PRICE: On demand more
5
Bimak drilling machine offered. Type: 13 DU Stroke spindle: 80 mm Speed: 200-2800 RPM Power: 400 V Year of built: 2005 Machine height: 164 cm Cl2gyxhq For more information call us or send an e-mail. more
4

Ima Combimat and Ligmatech IMA Combimat

Moneymore, United KingdomUnited Kingdom
5407 km
2002
good (used)
Ima Combimat with Ligmatech Return System Equipped with Pre- Milling Hogging Glue Application unit 6 coil tape magazine and feed End Trimming Rough Trimming Fine Trimming Nnxot Corner Rounding PVC Scrapers Glue Scrapers Buffers Spraying Devices throughout Fully reconditioned 5 years ago more
15

EDGES IN GLUE - BANDING IMA COMBIMA/K/II/R75/1075/V/R3

Pollenzo, ItalyItaly dealership location
6768 km
ready for operation (used)
Subfamily: Double-sided edge machining  Type of the attached edge: edge of thin strong edge  Adhesive system: EVA  Min. height of the Panel: 10 mm Maximum height of the Panel: 60 mm Min. length of the Panel: 150 mm Berpp7anin Min... more
6
CNC processing centre Brand: IMA Type: BIMA 410/V/7/4 Year: 1999 Technical data: Moving area of the main spindle: X = approx. 5700 mm, Y = approx. 1900 mm, Z = approx. 440 mm Moving area with standard units: X = approx. 4000 mm, Y = approx. 1200 mm max. clamping height from top edge suction plate Z = approx. 100 mm 8yzfd3i Height of working table approx. 1000 mm Changable field area: Without pendular processing: X = 2 x 1650 mm Empty space central: X = 700 mm with pendular processing... more
6

CNC machining centre IMA BIMA 610/V /140/500

Klipphausen, GermanyGermany dealership location
6814 km
2001
used
CNC machining centre IMA BIMA 610/V /140/500 Working dimension X: 5.000 Working dimension Y: 1.400 Working dimension Z: 100 Number of routing spindles: 2 Independent Z-axes: 2 Main motor power kW: 12 Behy30tc8h Rotation speed max rpm: 24.000 Torque support: Yes 4th axis: C-axis Tool clamping system: HSK-F63 Tool changing positions: 18 Number of exchangeable units: 3 Vertical drilling spindles: 21 Horizontal drilling spindles in X: 2 Horizontal drilling spindles in Y: 2 Saw aggregate: Unit, chan... more
6

TORNIO CNC A 6 ASSI BIMANDRINO COMPLETO DI CARICABARRE - USATO - MORI SEIKI DL 150MC

Matelica (MC), ItalyItaly dealership location
7203 km
1997
ready for operation (used)
MAX TURNING LENGTH: 200 mm MAX TURNING DIAMETER: 170 mm BAR CAPACITY: 46 mm SPINDLE: 5000 rpm; 5,5 - 7,5 Kw; ASA 2-5 COUNTER SPINDLE: 5000 rpm; 5,5-7,5 Kw; ASA 2-5 DRIVEN TURRET HEAD: 12 + 12 POS CONTROL UNIT: MSC 518 BAR FEEDER: IEMCA CNC BOSS 542/32 BAR LENGTH: 3200 mm BAR DIAMETER: 45 mm Br8w88su ACCESSORIES: PARTS CATCHER; SWARF CONVEYOR PRICE: On demand more
6

Single side edge bander IMA Combima

More Ima Combima
Petershagen, GermanyGermany dealership location
6470 km
2003
used
Manufacturer: IMA PU Kantenbearbeitung, Type: Combima, Year: 2003, Control: ima, Min-max edge material mm: 0,5-3,0, Work piece width min-max mm: 85, Min.-max. workpiece length in mm: 150-3500, Min.-max. workpiece height in mm: 10-55, Min-max feed m/min: 6-30, Einlauflineal gesteuert: yes, Premilling: 2 X 6,6, IR zone: 2 , Power per lamp: 2 X1,5, Coil magazine: 32, Mitre stations: yes, Bevel milling: yes, Radius milling axis adjustment: yes, 2 motors: yes, Radius scraper: yes, Flat scraper: yes, ... more
5

Spare Parts ERSATZTEILE KOLB CUBIMAT

St. Ingbert, GermanyGermany dealership location
6494 km
used
table length:3000 mm table width:1500 mm Bekxhz0ccz table load: t :200 +/-0,1 mm control:Sinumerik 840 C hydraulic power unit:250 l spindle:Kessler Typ: DMR100524FGS kW coolant:Schimpke 3,5 kg more


ima bima
daily

New machines via email!

Stay updated!
15

EDGES IN GLUE - BANDING IMA COMBIMA

More Ima Combima
Pollenzo, ItalyItaly dealership location
6768 km
ready for operation (used)
Subfamily: edging double type of attached edge: bordo sottile bordo spessore type of attached edge: EVA M in. Height of the Panel: 8 mm maximum height of the Panel: 60 mm maximum width of the Panel: 3200 mm min. thickness of the edge: 0.4 mm upper pressure: Yes pressure by means of: rubber strap Edition leadership Panel: Yes in the part of the Formatschn ITTS mounted units left side: 3 1 aggregate: routers automatic intervention time: Yes  ... more
6
Edge milling and sanding machine Brand: IMA Type: Combima/N/I/R80/760/V Year: 1993 Fix stop side left Top pressure with wide v-belt 1 Main stand equipped with: 1 Milling unit with motor 4,4 / 6,6 KW 50/100 Hz - 2860 / 5870 rpm. pneumatic adjustable swivable With manual adjustments, displayed via Siko counters - vertical, horizontal swivel 1 Milling unit with motor 4,4 / 6,6 KW 50/100 Hz - 2860 / 5870 rpm. pneumatic adjustable swivable With manual adjustment, displayed via Siko counters - ver... more
6

CNC machining centre IMA BIMA 310 120/400

Klipphausen, GermanyGermany dealership location
6814 km
2004
used
CNC machining centre IMA BIMA 310 120/400 Working dimension X: 4.000 Working dimension Y: 1.310 Working dimension Z: 100 Number of routing spindles: 1 Main motor power kW: 7,5 Rotation speed max rpm: 24.000 Torque support: Yes 4th axis: C-axis Tool clamping system: HSK-F63 Tool changing positions: 18 Number of exchangeable units: 2 Jcv0saeby Vertical drilling spindles: 14 Horizontal drilling spindles in X: 2 Horizontal drilling spindles in Y: 2 Saw aggregate: Unit, changeable Cantilever machine... more
6
Steuerungsart : IMA WOP 9 ( 2016 umgebaut ) Bfamwtzajv Umgebaut auf Schmalz Sauger Lagerort: Lieferant more
3
Manufacturer: IMA, Type: BIMA 610 V, Year: 1998, Software: IMAWOP 5.0, Programming station office: IMAWINCAD , Work piece width min-max mm: 1.400, Min.-max. workpiece length in mm: 5.000, Min.-max. workpiece height in mm: 40/100, Pendulum processing: 2 x 1.750, Work piece width min-max mm: 1.400, Min.-max. workpiece length in mm: 5.000, Min.-max. workpiece height in mm: 40/100, Year :1998 Bexdw8rrre more
12
Machining center manufacturer: IMA, type: BIMA/100 Quadroform, serial No.: 20032, year of manufacture: 1992, with editing Console, control NUM57B, plant was never commissioned due to lack of suction Nk7qf more
15

EDGES IN GLUE - BANDING IMA COMBIMA /K/I/R75/800/F/R2

Pollenzo, ItalyItaly dealership location
6768 km
ready for operation (used)
Subfamily: edge glue machine Bander type of attached edge: EVA min. height of the Panel: 14 mm maximum height of the Panel: 60 mm maximum width of the Panel: 4200 mm maximum driving speed: 35 m / min upper pressure: Yes  Pressure means: rubber strap Edition leadership Panel: Yes with positioning by NC: Yes introducer system Panel in the wave l: Yes in the part of the format section-mounted units: 1 1 aggregate: corrections car automatic interve... more
6
Single sided plant for the process of door frames Brand: IMA Type: Combima Systems/I/R75 Year: 2012 Technical data "workpiece": Workpiece length: min. 1000 mm, max. 3100 mm Workpiece width min. 70 mm, max. 560 mm Workpiece thickness min. 15 mm, max. 40 mm Infeed device for lengthwise processing: Lmalfqsn - Max. work speed: 30 m/min. - Min. distance between workpieces: 600 mm - Min. workpiece size: 70 x 1000 mm - Max. workpiece size: 560 x 3100 mm - Max. workpiece weight: ca. 50 kg Units: Hog... more
6
Production line for worktops IMA BIMA 410/V /D 140/500 Working dimension X: 5.000 Working dimension Y: 1.300 Working dimension Z: 100 Number of routing spindles: 1 Independent Z-axes: 2 Main motor power kW: 18 Rotation speed max rpm: 24.000 Torque support: Yes 4th axis: C-axis Tool clamping system: HSK-F63 Tool changing positions: 18 Number of exchangeable units: 5 Saw aggregate: Unit, changeable Lock recess milling aggregate: Unit, changeable Edgebanding aggregate: Seperate Y-axis Edgeband heig... more
2
Scoring saw zaidi Aggergat 2 piece as a spare part to an edge banding machine IMA COMBIMA the IMA Combima is spare-ready and can be purchased whole machine as. Beq3bbg89d Subject to prior sale! more
6

CNC-machine IMA BIMA 100 QUADROFORM

More Ima Bima 100
Rietberg, GermanyGermany dealership location
6460 km
1992
ready for operation (used)
machine CNC-machine manufacturer IMA type BIMA 100 QUADROFORM part Id-no. 2246951 year of construction 1992 ... more
6

Double edge bander IMA Combima I

Petershagen, GermanyGermany dealership location
6470 km
2010
used
Manufacturer: Ima zweieinseitige Maschinen in Verkettung, Type: Combima I, Year: 1999 Überholt 2010, Control: IMA, Min.-max. workpiece length in mm: 150, Min.-max. workpiece height in mm: 10-60, Infeed table: Rollgang mit Drehstattion, Min-max edge thickness mm: 0,5-3,0, Min-max strip length mm: 300, Min-max protrusion of workpiece mm: 38, Min-max feed m/min: 8-40, Velängerte Kette mm: yes, Cam distance mm: ca.450, Premilling: yes, Profile milling: yes, Machining cracks: Zerspanen, Fine milling:... more
15

CNC machining center IMA BIMA/410/R3/140/600

More Ima Bima 410
Pollenzo, ItalyItaly dealership location
6768 km
ready for operation (used)
Subfamily: editing table with vacuum cleaner performance main spindle: 9 KW workspace axes x 6000 mm working area axes Y: 1400 mm movement speed axis x: 100 m / min speed axis Y: 80 m / min speed axis Z: 25 m / min working level: Yes working level: with poles with suction pads ANZ. Poles with suction pads: 8 with positioning by NC: Yes suction pads to keep the processed workpiece: Yes Qty. Suction pads: 24 with positioning by NC: Yes vacuum pump: Yes Qty. Pump: 1 single capacity: 250 m3/h... more
6
Edge processing line Make: IMA Type: COMBIMA Technical data: Machine 1 Edge banding and post processing with adjustable 0-line. Unit carrier for glueing and processing units motoric adjustable from transport chain. Working width: max. 1300 mm workpiece projection from chain, left side: approx. 40 mm workpiece projection from chain, right: approx. 40 - 80 mm min. troughfeed width at workpiece projection of 40 mm: approx. 240 mm min. strip length of coil material: approx. 260 mm min. strip hei... more
6
CNC machining centre IMA BIMA 410/V 120/600 Working dimension X: 6.000 Working dimension Y: 1.200 Working dimension Z: 100 Number of routing spindles: 1 Independent Z-axes: 2 Main motor power kW: 7,5 Rotation speed max rpm: 18.000 Torque support: Yes 4th axis: C-axis Tool clamping system: HSK-F63 Tool changing positions: 18 Number of exchangeable units: 2 Vertical drilling spindles: 14 Horizontal drilling spindles in X: 4 Horizontal drilling spindles in Y: 2 Saw aggregate: 90° turnable Edgebandi... more
2
2 PCs milling unit equal opposite as spare parts double-sided edge banding machine IMA COMBIMA Nlxwt more
6

CNC-machine IMA BIMA 310

Rietberg, GermanyGermany dealership location
6460 km
2003
ready for operation (used)
machine CNC-machine manufacturer IMA type BIMA 310 part Id-no. 2249099 Fhbo2nyq year of construction 2003 ... more
6

4-axis CNC machining centre IMA BIMA 610-2H

Petershagen, GermanyGermany dealership location
6470 km
1996
used
Manufacturer: IMA, Type: BIMA 610-2H, Year: 1996, Control: num, Working range X: 7000, Working range Y-axis: ca. 1150, Working range Z: 200, C axis: no, Number of milling spindles vertical: 2, Tool adaption system: HSK 63, Milling engine 1 hours power: 7,5, rpm 1): 1800-24000, Milling engine 2 hours power: 7,5, rpm 2): 1800-24000, Tellerwechseler: yes, Number of tools per tool-magazine: 2 X 12, Mitfahrender Werkzeugwechsler: yes, raster table: yes, 4 station allocation: 8, Vacuum pumps m³/h: 250... more
10

Lyndex 145 fullyautomatic paper baler Lyndex Bimax 145

Resolven, United KingdomUnited Kingdom dealership location
5680 km
2011
refurbished (used)
Lyndex Bimax 145 Baler For Sale Ex works Wales, Swansea, Great Britain United Kingdom. Year: 2011 Hours: Unknown Warranty period: 12 months from installation/commissioning Bepshz2dg3 Electrical: Siemens S7 PLC system Motors: 3 x 55kw The machine has been maintained by us and has a full service history showing 4 services per annum. The machine is being supplied with two sets of manuals complete with hydraulic and electrical drawings. SOLD AS SEEN or fully refurbished Speci... more
4
Kontur-Kantenanleimmaschine Fabrikat: BIMATIC Typ: B 100 S 2L Baujahr: 1989 Bdxp2a0yz2 more
6

CNC machining centre IMA BIMA 310 120/500

Klipphausen, GermanyGermany dealership location
6814 km
2003
used
CNC machining centre IMA BIMA 310 120/500 Working dimension X: 5.000 Working dimension Y: 1.200 Working dimension Z: 100 Number of routing spindles: 2 Main motor power kW: 7,5 Rotation speed max rpm: 24.000 Torque support: Yes 4th axis: C-axis Tool clamping system: HSK-F63 Tool changing positions: 18 Number of exchangeable units: 3 Vertical drilling spindles: 21 Horizontal drilling spindles in X: 2 Horizontal drilling spindles in Y: 2 Saw aggregate: Unit, changeable Cantilever machine: Yes Machi... more
12
Machine equipment per page: Scorer, cutter Milling aggregate (same and mating) Universal aggregate (top, bottom) pressure zone Gluing grade edge Pressure zone 1roll +2 rolls Gluing zone, soft edge Pressure zone 1roll + 2 rolls Soft Chop saws (front, rear) Milling unit (top / bottom) Scraper flat Belt sanding unit Profile Belt sanding unit Juizh9k Profile belt sanding unit from above Oscillating grinding unit more
6

CNC-machine IMA BIMA 600

Rietberg, GermanyGermany dealership location
6460 km
1995
ready for operation (used)
machine CNC-machine manufacturer IMA type BIMA 600 part Id-no. 2249360 year of construction 1995 ... more
6

4-axis CNC machining centre IMA BIMA

More Ima Bima
Petershagen, GermanyGermany dealership location
6470 km
1994
used
Manufacturer: IMA, Type: BIMA , Year: 1994, Control: IMA Num/BimaOPS Industrierechner, Working range X: 4750, Working range Y-axis: 1720, Working range Z: 270, C axis: 360, Feeding speed max m/min: 80/60/25, Pendulum processing: yes, Number of milling spindles: 1, Milling engine 1 hours power: 5,5, rpm 1): 12000, Number of tool changers: 1, Tellerwechseler: yes, Number of tools per tool-magazine: 16, 2 station allocation: 2, Vacuum pumps m³/h: 100, Tool clamping system: HSK 63 B, Werkstückspanns... more
15

CNC machining center IMA BIMA/CUT/140/420

Pollenzo, ItalyItaly dealership location
6768 km
ready for operation (used)
Subfamily: CNC edit center with vacuum sucker  Bqwmik2 Type: Grind puncation  Working area Axes X: 4200 mm Working area axes Y: 1400 mm Working level: Yes  Working level: With poles with suction elements  Anz. Poles with suction elemen... more
6
CNC processing centre Brand: IMA Type: BIMA/310/120/500 Year: 2002 Basic machine Massive steel construction. On the machine bed the support is ordered in X-direction. Working table with 8 workpiece supports 1 rear row of stops and 1 frontal row of stops LED setup support for support and vacuum cups positioning Connection for template operation On the support there is the cantilever. On the left hand side of the cantilever the support moves in Y- and Z-direction. The machinen bed with the in... more
6

CNC machining centre IMA BIMA CUT V 145/300

Klipphausen, GermanyGermany dealership location
6814 km
2011
used
CNC machining centre IMA BIMA CUT V 145/300 Working dimension X: 5.000 Working dimension Y: 1.450 Working dimension Z: 100 Number of routing spindles: 1 Main motor power kW: 11 Rotation speed max rpm: 24.000 Torque support: Yes 4th axis: C-axis Tool clamping system: HSK-F63 Tool changing positions: 18 Number of exchangeable units: 4 Vertical drilling spindles: 14 Horizontal drilling spindles in X: 2 Horizontal drilling spindles in Y: 2 Saw aggregate: 90° turnable Edgebanding aggregate: Seperate ... more
8
CNC machining center IMA, type BIMA 800-V, Seriennr. 21114, BJ. 1995, machine length about 8,000 mm, 8 charging bars with vacuum holder, movable, underfloor strap belt powered by motor, working area X, Y, Z: 6,000, 1,500, 400 mm, memory with 12 seats, edge bond unit, 3-piece control cabinet, Line height about 2,000 mm, control tile with computer unit, monitor diagonal about 200 mm, 17 "tube monitor, control NUM 750 B Bknkfuh0 more
1
suited for drilling/milling in wood/alu/plastic 5 axis with vaccuum table ----- Обрабатывающий центр для сверления и фрезерования дерева, алюминия и пластика - 5 координат Bdl2qbz0ip - Вакуумный столnbsp; more
6

4-axis CNC machining centre IMA BIMA 810 V

Petershagen, GermanyGermany dealership location
6470 km
2000
used
Manufacturer: IMA , Type: BIMA 810 V, Year: 2000, Control: IMATRONIC, Software: IMAWOP, Working range X: 5200, Working range Y-axis: 1600, Working range Z: 180, C axis: yes, Pendulum processing: yes, Number of milling spindles vertical: 1, Tool adaption system: HSK 63, Milling engine 1 hours power: 12, Number of tool changers: 1, Number of tools per tool-magazine: 18, Vertical drills-X: 11, Drill vertical Y: 11, 2 station allocation: yes, 4 station allocation: yes, Vacuum pumps m³/h: 2 x 100 , E... more
15

EDGES IN GLUE - BANDING IMA COMBIMAT/II/Q/MN/MEV/DD

Pollenzo, ItalyItaly dealership location
6768 km
ready for operation (used)
Subfamily: Double-sided edge machining  Min. height of panel: 8 mm Max height of the panel: 60 mm Max propulsion speed: 45 m/min Caterpillar with jacks: yes  Bfdkv9ceba Distance between jacks: 300 mm upper pressure: yes  ... more
6
CNC processing centre Brand: IMA Type: BIMA 410/400 Year: 2000 Technical specifications: working area with standard units: X-axis: 4000 mm Y-axis: 1200 mm max. clamping height from upper edge of suction plate: 100 mm max. workpiece thickness: depending on equipment / application working table height: approx. 1000 mm Alternating field area: with pendulum machining: 2 x 1400 mm free space (middle): 1200 mm machine weight: approx. 6500 kg Suction connection 1: 200 mm Ø on the main m... more
6
CNC machining centre with edgebanding IMA BIMA 410/V /120/500 Working dimension X: 5.000 Ovgptqw Working dimension Y: 1.200 Working dimension Z: 100 Number of routing spindles: 1 Main motor power kW: 7,5 Rotation speed max rpm: 18.000 Torque support: Yes 4th axis: C-axis Tool changing positions: 18 Vertical drilling spindles: 14 Horizontal drilling spindles in X: 4 Horizontal drilling spindles in Y: 2 Edgebanding aggregate: Seperate Y-axis Places in coil magazine: 2 Cantilever machine: Yes Mach... more
7
Column boring machine Fabr.BIMAK Typ:25 Bj.1986 Drilling power in steel: 25mm Spindle intake: MK3 Spindle speeds: 135-1900U/min engine KW 0.75 Pino-dub: 110mm Vsqkdi With 3 levels of combined Tense-up table: 300mmX300mm rotary bar and swivel bar Screw back-to-width 95mm wingspan 85mm Verstell etc swivel bar Prism up to 30mm swivel. With fast drilling feed, exit wedge, NOT-AUS mushroom pressure button, lamp, Machines Spindel LRuns Very Quiet. Dimensions: Length 830mm width 580... more
6
Maschinenbauweise : Auslegermaschine Bearbeitungsgröße in X-Richtung : 3000 mm Bearbeitungsgröße in Y-Richtung : 1000 mm Bearbeitungsdicke (Z-Maß) : 60 mm Anzahl der Hauptspindeln : 2 Stk Hauptspindelleistung : 5.0 kW Hauptspindeldrehzahl : 1800 - 8000 U/min Spannsystem : PS 25 Spindelkühlung : Luftkühlung Anzahl der Achsen : 3 Rückwandnutaggregate : 0 bis 90° drehbar in X und Y vertikale Bohrspindeln - in X-Richtung : 7 Stk vertikale Bohrspindeln - in Y-Richtung : 11 Stk horizontale Bohrsp... more
6

CNC work centres IMA Bima 600

Petershagen, GermanyGermany dealership location
6470 km
1993
used
Manufacturer: IMA, Type: Bima 600, Year: 1993, Control: NUM 760, Working range X: 3000, Working range Y-axis: 1200, Working range Z: 250, C axis: no, Number of milling spindles: 1, Tool adaption system: HSK 63, Milling engine 1 hours power: 7,5, rpm 1): 1800-18000, Number of tool magazines: 1, Number of tools per tool-magazine: 8, Vertical drills-X: 5, Stops in the table rear: yes, Number of tables: 1, Traverse table: yes(Rolle), Vacuum pumps Qty: 2 X 80, Tool clamping system: vakuum, Year :1993... more
15

EDGES IN GLUE - BANDING IMA COMBIMA CONCEPT 800 C

Pollenzo, ItalyItaly dealership location
6768 km
ready for operation (used)
Subfamily: Double-sided edge processing  Minimum height of the panel: 8 mm Max height of the panel: 60 mm Minimum length of panel: 220 mm Max length of panel: 1300 mm Max width of the panel: 2100 mm Max propulsion speed: 50 m/min ... more
6

Edge processing line IMA Combima

More Ima Combima
Barntrup, GermanyGermany dealership location
6496 km
2007
used
Edge processing line Brand: IMA Type: Combima Year: 2007 Technical data: Nml27 Workpiece: - Length: min. 236mm, max. 2000mm - Width: min. single sided (with a chain) 126mm at min. workpiece length 266mm, only lengthwise processing without copying) min. double sided 236mm max. 1300mm - Thickness: min. 13mm, max. 40mm Smallest workpiece double side process 236x236x19mm Smallest workpiece single side process 266x126x19mm* *Processing with miller behind the short chain Biggest workpiece: 2000x... more
6
CNC machining centre with edgebanding IMA BIMA 410/V + Schugoma Kantenking Working dimension X: 3.000 Working dimension Y: 1.200 Working dimension Z: 100 Number of routing spindles: 1 Bdcuid8hrz Main motor power kW: 12 Rotation speed max rpm: 18.000 Torque support: Yes 4th axis: C-axis Tool clamping system: HSK-F63 Tool changing positions: 18 Number of exchangeable units: 4 Vertical drilling spindles: 5 Horizontal drilling spindles in X: 2 Horizontal drilling spindles in Y: 2 Saw aggregate: Uni... more
3
Year of manufacture 2011 Working dimension X 5000 Working dimension Y 1450 Working dimension Z 100 Main motor power kW 11 4th axis C-axis Tool changing positions 18 Vertical drilling spindles 14 Edgebanding aggregate Seperate Y-axis Machine table Pod and rail table Self-adjusting machine table Further technical details Software IMA BIMACUT EDITORARDIS CUTTING OPTIMIZER IMA IMAWOP 7.0 PC office licence Machine control IMA ICOS OPEN 231 Label printer IMA Dynapoint hand-cont... more


ima bima
daily

New machines via email!

Stay updated!

to

to

Edit search
IMA BIMA
SELL IMMEDIATELY
with the world-wide market leader from 0,79 EUR per listing.
Find out more


Phone: +44 (0) 20 806 810 84
or sell immediately
Try our app for used machines now!
Machineseeker app for iPhone and Android.