Used Ima Bima for sale (137)

Condition: used, machine/vehicle number: 005637, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt Combination Squaring Edgebanding Machine: First Pass Max Panel Width: 1300 mm Rodjvw Ev Hspfx Aa Uep Max feed speed: 50 m/min Operating Units Right Side: 11 nr Operating Units Left Side: 12 nr

Condition: used, machine/vehicle number: 005639, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt Corner Rounding Unit: yes Combination Squaring Edgebanding Machine: First and Second Pass Max Panel Width: 3000 mm Max feed speed: 50 m/min Rjdpfx Aevw Evgoa Uop Operating Units Right Side: 12 nr Operating Units Left Side: 12 nr

Condition: ready for operation (used), Year of construction: 2013, This IMA NOVIMAT I /G80/390/R3 edgebander was manufactured in 2013. It features dual 4.5 kW motors at 150 Hz, achieving speeds up to 9000 rpm. Capable of handling edge heights from 14 to 65 mm and roll diameters up to 850 mm, it's ideal for precise edgebanding needs. Consider the opportunity to buy this IMA NOVIMAT I /G80/390/R3 edgebander. Contact us for more information about this machine. Additional information • Motor Power: 2 x 45 kW, 150 Hz • Motor Speed: 9000 rpm • Power Supply: 230 V • Heating Power: 6 x 500 watts • Adjustment Range: Vertical approx. 17 mm, Horizontal approx. 30 mm • Stroke: Max. 8 mm • Roll Diameter: Max. 850 mm • Edge Height: 14 – 65 mm Rsdpfex D Nh Aox Aa Uep • Workpiece Projection: Min. 30 mm + edge thickness, Max. 80 mm including edge thickness • Workpiece Length: Min. 130 mm • Workpiece Gap: Min. 300 mm • Workpiece Distance: Min. 990 mm • Workpiece Thickness: Min. 8 mm, Min. 12 mm with tracing wheel, Max. 80 mm • Single Tracing Workpiece Projection: Min. 30 mm • Double Tracing Workpiece Projection: Min. 38 mm for max. 4 profiles, Max. 50 mm • Cutter Head Diameter: 125 mm • Motor Shaft: 30 x 68 mm diameter • Internal Thread: M16, Depending on motor, left or right • Cutting Cross-section Motor Power: 0.20 kW, 200 Hz 400 V, 12000 rpm for max. 195 mm², Option: 0.66 kW, Extension to max. 1100 mm² • Tool Diameter: 160 mm / 48 teeth • Swivel Range: 0 and 25 degrees • Workpiece Speed: Max. 30 m/min for an edge cross-section of 3 x 45 mm • Edge Overhang: Top edge, max. 3 mm, Bottom edge, max. 2 mm for straight edges • Edge Material: Edge, max. 4 mm for wood and plastic; Aluminum, max. 3 mm

Condition: excellent (used), Edgebanding Machine Advantage 4612F - Regularly maintained, year of manufacture 2002 - Total length 6000 mm - Width 1100 mm - Height 1900 mm - Weight 3100 kg Rjdjx Srp Ijpfx Aa Uop - Feed rate: 12 m/min - Workpiece dimensions: width 65 mm, max. thickness 45 mm, min. thickness 10 mm, length 150 mm, edge height 55 mm, 7 bar pressure - With two interchangeable glue pots - Pre-milling, flush trimming saw, multifunction unit, profile & surface scraper, buffing - With pre-milling unit

Condition: good (used), Year of construction: 2001, functionality: fully functional, MA HKA hand-held edge banding machine in fully functional condition. Redsx H Un Aspfx Aa Usp Edge banding machine for shaped parts Various pneumatic hoses have just been completely replaced. Edge thickness: 0.4 - 3 mm Panel thickness: 16 - 45 mm Strip feed: 20 - 50 mm Power consumption: 2.6 kW Minimum external radius: Depends on the flexibility of the edge material Minimum internal radius: 150 mm, depending on the material properties With support arm and spring balancer Vacuum clamping table with 4 switchable zones Rollers, vacuum pads (additional new rubber sets) for the vacuum table

Condition: used, functionality: unexamined, Ferwood Code: RU0011434 - Manufacturer Code: - Condition: Used - Functionality: Not tested - Compatible Machine: - If interested, we offer an overhaul service. Please contact us. 65KG 120X80X60 Redpjylakxsfx Aa Uop

Condition: used, functionality: unexamined, Ferwood Code: RU0011433 - Manufacturer Code: - Condition: Used - Functionality: Not tested - Compatible Machine: - If interested, we offer an overhaul service, please contact us. 65KG 120X80X60 Redsylaibopfx Aa Ujp

Condition: excellent (used), SINGLE-SIDE EDGE BANDER (LEFT-side) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Edges thickness in stips / lippings (min/max) mm 0.8 / 20 Panels thickness (min/max) mm 8 / 60 Numerical Control ICOS Open Feeding speed (adjustable) m/min 6 - 30 Rsdsyk Tkvspfx Aa Ujp Top pressure system with rubber belt Safety and sound-proof enclosures/cabins OPTIONAL: Panels in-feed system 63.152 (mm 500 x 500) In-feed fence, adjustable by N.C. Pre-milling Unit (vertical joint trimmers) 08.379 (2 x Kw 4,0) adjustable by N.C. Glueing Unit (EVA Glue) 283.1513 Band Pressure zone + Edge coils supporting unit (No. 1+2 reels) Snipping (end-cutting) unit 08.42/30/B (Kw 0,66 x 2) speed 30 m/min (0°-25°) Fine Trimming unit 08.055 (Kw 1,85 x 2) 0°-25° Multi Function Unit (Profile contour Trimming unit) SKF-L (2 x Kw 0,18) + (2 x Kw 0,4) Profile edge scraping unit 08.519 Glue scraping unit 08.521 Spraying Unit (for polishing liquid) Buffing unit 08.617-2 (Kw 0,18 x 2)

Year of construction: 1998, condition: good (used), Screwcapper for plastic caps diameter 50mm x 20mm H 380v 7,5kw machine with cap feeder/sorter and no cap detection. speed up to 50/min as-is Rjdpfxoh Np Uqe Aa Uop or adjusted to customer needs

Year of construction: 1994, condition: used, Manufacturer: IMA Model: K150/C Year: 1994 Type: Automatic cartoning machine with tuck-in closure Power: 3.5 kW Manufacturer's data capacity: 120 strokes/min Mechanical speed achieved in our workshops without products: 70 strokes/min Formats - A mini : 20mm - A maxi : 85mm - B mini : 12mm - B maxi : 60mm - C mini : 50mm - C maxi : 170mm Carton feeding: suction cup picking Product feed belt: cell chain Automatic inspection and rejection of non-compliant cartons Compressed air consumption: 183.5 Nl/min Rsdpfxox R D A Ro Aa Usp Dimensions depending on layout: diagram available in the photo gallery Weight: 1,400 kg Documentation and video in operation available

Condition: used, Manufacturer: Ima Farmomac Model: F370 18VL 8C Year: 1987 frame - Machine refurbished by the manufacturer in 2004 with pharmaceutical qualification. Rsdpex R Dqzefx Aa Usp Type : Monoblock bottle filling and crimping machine. Application: Glass and plastic syrup bottles with aluminium PP28 cap (Ø 28 mm-) Industrial sector: Pharmaceuticals and cosmetics Movement: continuous automatic Number of filling heads: 18 units Number of crimping heads: 8 units Volumetric pump: max. filling 1000 ml   Available sizes: 370 ml and 200 ml Capacity: 6000 vials/h in 370 ml Capacity: 7500 vials/h in 200 ml   NEM cap lifter Vibrating bowl Electrical cabinet Laminar flow cabinet Vessel/buffer tank before filling. Vial infeed conveyor with paddles Control box and power cabinet. Protective covers with safety devices. Available history and documentation   These elements can be quoted separately. change of format, bottle sealing (screw caps, pressure caps, end caps, PFPs, etc.), etc.

Condition: used, Year of construction: 2003, Manufacturer: IMA Kilian Model : E150 plus Version : 26-EU-B Year: 2003 Number of stations: 26 Die type: B Punch type: EU-B / IPT-B Punch configuration : die diameter: 30.16 mm height of dies: 22.22 mm max tablet diameter: 16 mm max filling: 15 mm Rjdpfx Aajx R A Ulo Uep max main compression: 80 kN max precompression: 23 kN Production rate: 7,800 – 160,000 tablets / h Technical documentation available Weight: 1500kg  

Condition: used, Year of construction: 2011, - Current format: capsule size 0 - 48 posts - Max capacity: 200,000 capsules / hour Redpfx Aasx Rz Hye Uop - Automatic checking weight - Year: 2001 and full revamping in 2011 / 12 - spare parts available. - All documentation and pharmaceutical qualification files available

Condition: used, Year of construction: 2010, functionality: fully functional, Single-sided edge banding machine in full configuration, incl. a total of 3 interchangeable glue application units, 1 of which for PUR adhesive Material dimensions: Roll material: - Paper and plastic edges: 0.3 - 3.0 mm - Veneer edges: 0.5 - 3.0 mm - Strips: 3.0 - 8.0 mm Edge height min. 12 mm, max. 65 mm Machine’s equipment: Infeed guide rail, automatic adjustment via program Release agent application Joint trimming unit with 2 motors, each 4 kW Blow-off nozzle for removing loose particles Gluing unit with 1.8 L glue application, with QUICK-LOCK with single roll/strip magazine 1 main pressure roller and 3 follow-up pressure rollers Automatic pressure zone adjustment via program End trimming unit with 2 motors, 660 W, swiveling 0 to 8 degrees Corner rounding / copy milling unit with 2 motors, 180 W and 2 motors, 400 W Max. workpiece thickness 60 mm Max. feed speed 20 m/min Automatic adjustment via program Profile scraping unit Glue joint scraping unit Cleaning agent application Buffing unit with 2 motors, 180 W Control system ICOS open TS, PC-based Rjdpjybbayofx Aa Uop

Condition: ready for operation (used), Year of construction: 2010, operating hours: 19,714 h, This IMA Advantage 550 was manufactured in 2010. A used single-sided edge bander featuring a jointing cutter, radiant heater, EVA gluing unit, and a roll magazine for edge material. It includes a cutting unit, flush milling top/bottom, and a profile scraper unit. The machine offers a feed speed of 20 m/min, ideal for efficient production. Consider the opportunity to buy this IMA Advantage 550 edgebander. Contact us for more information. Additional equipment • Jointing cutter • Radiant heater • EVA gluing unit • Roll magazine for edge material • Cutting unit • Flush milling top/bottom • MFA with 2 motors for radius r2, servo-controlled • Profile scraper unit Rsdpfx Aasyaqbws Usp • Surface scraper unit • Buffing unit Machine Benefits Technical Machine Benefits • Feed speed: 20 m/min Extra Information Machine still under power

Condition: ready for operation (used), Year of construction: 2019, A complete can erecting, counting and seaming system including labeling and cartoning is available. 1) Can unscrambler IMA Swiftpack UN 800S, year of manufacture: 2007, unscrambling capacity: 60 cans/min, formats diameter/height: 45mm/51.5mm, 45mm/84mm, 45mm/96mm, 60mm/80mm, 60mm/122mm. 2) Counting machine Cremer CF 1220, year of construction: 2002, counting capacity: 1000 products/min, counting heads: 1, channels: 12, formats: Capsules (HGK & WGK) and tablets (round & oblong), including one cylinder for storage flaps as spare part. 3) 2x rotary plate Höflinger & Karg S1, plate diameter: 1000mm. 4) CBV Servo lid closing machine (screw capper), year of manufacture: 2019, closing capacity: 40 closing operations/min, lid diameter range: 23mm-100mm. 5) Rudolf Deckert AVM 738 can seamer (crimper), year of manufacture: 2003, seaming capacity: 50 cans/min, can diameter: 45mm/60mm, lid formats diameter/height: 42.4mm/17.15mm, 50mm/12mm. 6) Can and bottle labeler IMA Sensitive 350, year of construction: 2009, labeling capacity: 350 labels/min, can and bottle diameter range: 15mm-78mm, max. product height: 220mm, label length range: 15mm-220mm, label height range: 10mm-140mm, equipped with hot stamping Allen Coding Set S-Compact 50/30 and camera Keyence IV 500 CA. 7) Can and bottle cartoner Uhlmann C100, year of construction: 1988, cartoning capacity: 70 cans/min, max. Can/bottle diameter and height: 60mm/120mm, folding carton length range: 30mm-113mm, folding carton width range: 15mm-85mm, folding carton height range: 70mm-130mm, the machine was converted to cans and bottles in 2017 and equipped with a Mitsubishi D700-SC control system, including GUK Cartonac 91 folder, 3x code reader and luminescence control. 8) Wipotec TQS-HC-A coding and inspection device for serialization, temper evident and weighing, year of manufacture: 2017, inspection capacity: 300 products/min, including 2x Herma 400 label dispenser, dual print head (2 cartridges), camera for print inspection, load cell with weighing belt and hand scanner. 9) Christ FilmTeq 3030 banding machine, year of manufacture: 2011, infeed capacity: 50-200 folding boxes/min, outfeed capacity: 7-50 packs/min, folding box length range: 15mm-400mm, folding box width range: 15mm-90mm, folding box height range: 60mm-150mm, bundle length range: 60mm-400mm, bundle width range: 60mm-150mm, bundle height range: 30mm-230mm. Documentation available. On-site inspection is possible. Redpewa Tixjfx Aa Usp

Condition: ready for operation (used), Year of construction: 2005, Carton width range: 28mm-92mm, carton height range: 14mm-60mm, carton length range: 55mm-190mm, max. total cross-section (width + height): 140mm, packaging capacity: 120 cartons/min, machine dimensions X/Y/Z: approx. 2550mm/1250mm/1800mm, weight: approx. 1200kg. Documentation available. On-site inspection is possible. Rsdpfx Aev Suhbja Uop

Condition: ready for operation (used), Year of construction: 2010, This IMA Advantage 310 edgebander was manufactured in 2010. It handles workpieces from 150 mm in length and 65 mm in width, with thicknesses up to 60 mm. It's equipped for various materials including chipboard and MDF, using melamine, paper, foil, or veneer edges. Features include a gluing unit, cutting unit, and a buffing unit, enhancing finishing processes. Consider the opportunity to buy this IMA Advantage 310 edgebander. Contact us for more information about this machine. Machine Benefits Technical Machine Benefits • Minimum workpiece length: 150 mm • Minimum workpiece width: 65 mm (with max thickness of 25 mm), 150 mm • Workpiece thickness: min. 8 mm, 12 mm with profile scraper blades; max. 40 mm (mfa 08346), 60 mm (skf) • Smallest workpiece: 65 x 300 mm / 150 x 150 x 19 mm • Machining allowance per workpiece edge: 0 - 5 mm • Workpiece shape: rectangular • Material: chipboard, mdf • Surface material: direct coating (melamine resin paper), paper, foil, veneer Extra Information Edging Material Roll material without foil: Paper edges & plastic edges: 0.3 - 3.0 mm Veneer edges: 0.5 - 3.0 mm Max. edge cross-section: 150 - 180 mm² Cut-to-length edge strips: Strips: 3.0 - 8.0 mm Max. strip cross-section: 520 mm² Rsdpfx Aex U U Dtsa Uep Edge height: Min. 12 mm, max. 65 mm Max. upper edge overhang: 2 mm Edge profiles: Paper edge: Approx. 0.4 mm, bevel 15° Plastic edge up to 3.0 mm, depending on radius tool Milling strip flush up to 8 mm Machine Constant workpiece projection from the chain track: 35 mm + edge thickness Max. cutting cross-section: 520 mm² Passage width: Min. 65 mm (with 35 mm projection) Min. workpiece length in feed direction: 150 mm Basic height (top edge of chain track): 940 mm Aggregate side: Left in feed direction Pneumatic connection: Approx. 7 - 8 bar Joining Unit 08.379 and Blow Nozzle 2 motors 4 kW each, 9000 rpm Gluing Unit 283.1513 Glue dispenser 0.8 l, 60 mm high Suitable for hot melt or PU glue With single roller/strip magazine, roller diameter 800 mm 3 main pressure rollers and 3 pressure rollers Cutting Unit 08.415 Pneumatically swivels to 0° or 8 2 motors, 12,000 rpm 2 HM cross-cut saw blades Copy Trimming Unit SKF-L 4 motors, 12,000 rpm Profile length in throughfeed direction: Max. approx. 50 mm Workpiece thickness: Max. 60 mm Working speed: Max. approx. 20 m/min Distance between 2 workpieces: Min. approx. 400 mm Profile Scraper Unit 08.519 For rescraping an upper and lower milled quarter circle profile Self-Scanning Scraper Unit 08.521 For removing hot melt adhesive residue from the edge area of the top and bottom of workpieces Buffing Unit 08.617-2 Upper and lower motor: 180 W, 1400 rpm 2 polishing wheels 50 x 160 x 19 mm

Condition: good (used), Gluing unit, gluing section, gluing head, heating basin for edgebanders, edgebanding machine Rsdpfxob A S N Rs Aa Ujp -electrically heated -7x heating elements, each 800 watts -revised by FavFE-MA-TECH -2x glue pots available Price: per piece -Dimensions: 190/100/H125 mm -Weight: 3 kg/piece

Condition: used, Year of construction: 1985, functionality: fully functional, working width: 2,000 mm, total width: 4,000 mm, total length: 6,000 mm, total height: 3,000 mm, overall weight: 3,000 kg, type of input current: AC, space requirement height: 3,000 mm, IMA double-end profiler with five machining axes per side. All axes are mechanically adjustable. Infinitely variable feed rate. Sale includes soundproof cabin. Ex location, self-dismantling. Redpoyf Ek Rsfx Aa Uep

Condition: good (used), IMA BENZ drilling unit 10 +11 spindles with additional milling cutter and horizontal drilling head 2 x 3 spindles for IMA 310 410 610 If you are looking for a different drilling gear from Homag or IMA, please contact us or have a look at the website in our store. IMA BENZ drilling unit is a versatile and powerful tool, especially for the IMA 310, 410 and 610 machines. It is a 10 + 11 spindle drilling unit with an additional milling cutter and a horizontal drilling head with 2 x 4 spindles. Here are some technical details: Unit no.: 4-08300 and 4-07753 Drawing no.: 000W00004824 and 000M11100819 Motor speed: 1max = 4800 min-¹ Spindle speed: 8100 min-¹ and 8400 min-¹ Rjdoudludjpfx Aa Usp Drive power: 4 kW Gear ratio: i = 1:1.69 and 1:1.75 Milling spindle: For holding milling tools The unit is used but in a functional condition and offers high productivity thanks to the ability to drill several holes simultaneously, which significantly reduces machining time.

Condition: good (used), Electrospindle Main spindle OMLAT IMA 12 KW The price includes the C-axis shown. If you only require the main spindle, we will of course grant a discount. 1st tool holder: Type: HSK F63, similar to DIN 69893 Taper diameter: 38 mm 2. tool retraction: Automatically controlled Pull-in force: 11000 N 3. tool weight: Maximum weight: 6 kg 4. direction of rotation: Right/left rotation, programmable 5. speed range: Redpfxerhzlns Aa Uep Infinitely adjustable from 1500 to 22000 revolutions per minute Programmable for individual requirements 6. drive: Frequency-controlled three-phase motor 7. drive power: 12 KW in S-1 operation 8. spindle lubrication: One-time factory grease lubrication for efficient maintenance 9. spindle cooling: Water cooling to maintain optimum operating temperatures 10. constant performance: Range from 12,000 to 22,000 revolutions per minute Spindle condition: Used but tested The main spindle was removed from a running system and carefully checked. As an alternative to new spindles, which are often not available, it guarantees immediate use and optimum reliability. This used spindle offers a cost-effective solution without compromising on performance.

Condition: reconditioned (used), functionality: fully functional, IMA Adapter Unit with Interchangeable Flush Trimming Head and Flat Scraper Blade The IMA adapter unit is a refurbished interchangeable unit designed for flush trimming operations and equipped with a flat scraper blade. Featuring the article number 10 237 069 and an HSK 63 F clamping system, this unit is ideal for precise and secure machining tasks. The unit’s rotation is synchronized with the drive rotation, and it includes a 57 mm opening. Specifically designed for use with IMA machines, it supports tools with chamfer milling cutters. Included in the package is a flat scraper blade. The bolt dimensions are 16/18.1 mm. The unit can reach a maximum speed of 9000 revolutions per minute and has a maximum probing depth of 1.5 mm. Following a comprehensive refurbishment, which includes inspection, replacement of bearings, and new pneumatic hoses, the unit offers maximum safety, precision, and a nearly new condition. Used adapter units are taken from operational systems and are fully functional. Any age-related wear or significant precision limitations are clearly noted. Technical Description • Product: IMA Adapter Unit with Interchangeable Flush Trimming Head and Flat Scraper Blade • Article Number: 10 237 069 • Clamping System: HSK 63 F • Condition: Refurbished • Rotation: Synchronized with drive rotation • Opening: 57 mm • Support Bolt: For IMA machines • Tools: Compatible with chamfer milling cutters Rjdpfx Aoudl Idsa Uep • Flat Scraper Blade: Included • Bolt Dimensions: 16/18.1 mm • Maximum Speed: 9000 RPM • Maximum Probing Depth: 1.5 mm • Special Features: • Inspected and fully re-bearings for maximum safety and precision • Pneumatic hoses replaced • Nearly new condition Note: Used adapter units are fully functional, extracted from operational systems. Explicit notice is provided for excessive wear or significant precision reductions due to aging.

Condition: good (used), functionality: fully functional, overall weight: 48 kg, FISCHER IMA Main Spindle FEZPS 100×88.3 HSK F63 Motor Spindle Electrospindle with C Axis No. 123866 | Art. No. 123866 – IMA CNC (spindle motor, main spindle, c axis) Art. No.: 123866 Manufacturer: E. Fischer AG Machine focus: IMA CNC Marking on spindle: FEZPS 100×88.3 HSK F63 Serial range on spindle: 123866 Serial No.: as per nameplate Manufacture date: 15.07.2004 Technical description Offered here is an original FISCHER main spindle, model FEZPS 100×88.3 with HSK F63 tool interface, for IMA CNC machining centers. The FEZPS 100×88.3 HSK F63 designation is the critical identifier for this spindle and is decisive for compatibility verification. Additionally, this spindle is equipped with an integrated C axis (W axis) and a mounted permanent magnet motor. Connections and configuration The spindle features multiple connections in the upper terminal box: • Main power connector for motor supply • Separate circular connectors for C axis and encoder signals • Coolant connections at the spindle base marked WATER IN and WATER OUT • Connection for Protecting Air Flow for compressed air sealing The arrangement, design, and pin configuration of these connectors are machine and type-specific and must be compared with your original spindle before purchase. Technical data as per nameplate Type: mW 13.5/10 4 No.: 964207 Class No.: B Rated voltage: 28 to 380 V Frequency: 25 to 400 Hz Rated current: 2.6 to 2.8 A Rated power: 0.55 to 1.2 kW Rated speed: 680 to 11,900 rpm Protection rating: IP55 Number of poles: 4 Efficiency: 81.1 % Model: FEZPS 100×88.3 Weight Approx. 45 kg Dimensions Approx. L × W × H = 420 × 220 × 650 mm Rodpoychd Ujfx Aa Ujp Technical application Deployed as main spindle in IMA CNC machining centers with C axis for precise milling, drilling, and positioning operations. Important note on compatibility The compatibility of this spindle must be confirmed absolutely based on the designation FEZPS 100×88.3 HSK F63, article number 123866, nameplate data, and arrangement of the connections in the upper terminal box. The housing number is for internal reference only and is not sufficient for reliable identification. Condition Used, tested and functional Signs of use as per photos

Year of construction: 1955, condition: used, used Rjdevwf Szspfx Aa Uop manufactured by IMA type B55 built in 1955 Masch.-No. 0/650 pressing cylinder pneumatic 4 table 2900x1300 mm working height 750 mm max. material thickness ca. 200 mm located in 97447 Gerolzhofen, free on truck, unpacked sale in current condition as seen without guarantee and warranty