Used Ima Bima for sale (132)

Condition: used, functionality: unexamined, Ferwood Code: RU0008884 - Manufacturer Code: - Condition: Used - Functionality: Not tested - Compatible Machine: IMA COMBIMA/NOVIMAT EDGE BANDING MACHINE - If interested, we offer a revision service, contact us. Hsdpfx Aov Hgmfjacsnu

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, Single-Sided Narrow Edge Bander IMA NOVIMAT / CONTOUR / I / G80 / 790 / L20 with Servo Unit for Corner Copying MFA Year of Production: 2009 Condition: Very good Features: * Stable machine frame with mounted processing units * Electronically adjustable feed speed: 6–30 m/min (feed rate of processing units is not synchronized with full feed adjustment) * Feed chain guided in sliding rails with plastic pads and 80 mm wide rubber lining * Automatic lubrication of feed chain controlled by the machine program * Upper pressure roller: double V-belt, 70 mm wide, on ball-bearing rollers; electronically adjustable * CE-compliant machine safety * Noise-reducing and protective covers * Edge banding unit with drive enclosed in sealed oil bath and glue pot (1 main pressure roller + 5 auxiliary rollers); Quick-Lock pneumatic glue pot system for fast replacement * Touchscreen display * End trimming saw unit for cutting excess edge at front and rear corners, including: pneumatic saw adjustment 0–25°, straight cuts, corner chamfering, automatic saw positioning for two edge thicknesses (e.g., 0.4 and 1.2 mm), and excess edge adjustment for corner copying * All processing units equipped with chip extraction * Novimat Contour series maintains high processing quality due to powerful corner copying unit and minimal spacing between workpieces (\~300 mm) Basic Technical Data: * Roll edge thickness: 0.3–3 mm * Paper, PVC, and ABS edges: 0.3–3.0 mm * Veneer: 0.5–3.0 mm * Wooden strips: 0.8–20 mm * Edge height: 14–65 mm * Maximum top edge overhang: * Up to 8 mm thickness: 5 mm * Over 8 mm thickness: 2 mm Workpiece Dimensions: * Minimum length (feed direction): 150 mm * Minimum width (for thickness ≤25 mm): 65 mm * Minimum thickness: 8 mm (without flat planer) / 12 mm (with flat planer) * Maximum thickness: * Without corner copying: 60 mm * With corner copying: 40 mm * Smallest workpiece: 150 × 150 mm or 65 × 300 mm (\*65 mm width for max thickness 25 mm) Machine Parameters: * Electronically controlled feed: 6–30 m/min (may be limited by individual units) * Workpiece protrusion beyond feed chain: * 38 mm (edge thickness 0.3–8 mm) * 30 mm (edge thickness 8.1–20 mm) Power Supply: * Voltage: 400/230 V, ±5/–10% with neutral * Frequency: 50 Hz * Control voltage: 230 V AC / 24 V * Compressed air: 8 bar * Extraction air speed: 28 m/s Hnjdpfxew R S Slo Aacou

Condition: used, machine/vehicle number: 005928, Type of edging: Thin edge, Thick edge Gluing System: PUR Premilling Unit: yes Hjdpfjwuz Ewsx Aaconu Corner Rounding Unit: yes Max feed speed: 20 m/min Maximum panel thickness: 60 mm Operating Units: 8 nr

Condition: used, Year of construction: 2016, functionality: fully functional, IMA CASE PACKER, MODEL CP18 Hjdpfx Aasw Skxgecsnu Year of construction: 2016 Machine suitable for different production needs, ideal for packaging pharmaceutical items. - equipped with a horizontal case magazine for easy loading - the machine keeps the case erect during product insertion with the aid of suction cups fitted to the pick-up - all the parts of the machine can be reached from the operator’s side - can be equipped with optional groups and features such as: case overturning, product tracking and camera detection devices. Can also be fully servo driven PRODUCTION CHARACTERISTICS Output: 8 cases/min CASE DIMENSIONS Min: 220 x 120 x 120 mm Max: 600 x 400 x 350 mm

Condition: ready for operation (used), Year of construction: 2012, Table Outer length 500 mm Outer width 500 mm Additional Equipment Joint Milling Unit: 2 motors, each 4.0 kW, 8800 RPM Heater: Preheats workpiece edges up to 60 mm Glue Application: Handles edges up to 3 mm End Trimming Unit: 2 motors, 660 kW Additional Units: Milling, Multi-Profile Milling, Contour Milling, Multi-Profile Scraper, and Scraper Units; Buffing Unit Automatic Quickmelt hot glue feeder Board Return System with powered roller conveyors, cross conveyor, transport belt, angle transfer, air-cushion tables, and safety fence This IMA Novimat Concept / I / G80 / 440 / R3 edgebander was manufactured in 2012. It features a robust automatic edge banding and post-processing system, including a workpiece returning system for enhanced productivity. Capable of handling edge materials from 0.3 mm to 3 mm and workpiece thicknesses up to 60 mm. Equipped with a pneumatic quick-lock system and electronic temperature control for precise glue application. Consider the opportunity to buy this IMA Novimat Concept / I / G80 / 440 / R3 edgebander. Contact us for more information. Application Types Edge Banding Hsdpfx Aowpmdzeaconu

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, Edge Banding Machine Manufacturer: IMA Type: Quadromat 3512 U Year of 1999 Edge material: veneer rolls and strips, plastic, solid wood strips Edge height: 14-50 mm Edge thickness: 0.4-12 mm Speed: 18,000 rpm Cutting unit Milling units Profile scrapers Buffing unit Hsdpev T R Erjfx Aaconu Flat scrapers

Condition: used, functionality: unexamined, Ferwood Code: RU0000030 - Manufacturer Code: 10551904 - Condition: Used - Functionality: Not tested - Compatible Machine: IMA ADVANTAGE/NOVIMAT EDGE BANDING MACHINE - If interested, we offer a revision service, contact us. Hnsdpfxov Azf Io Aacsu

Condition: good (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 08420, total length: 11,500 mm, edge thickness (max.): 3 mm, overall weight: 8,500 kg, compressed air connection: 7 bar, Used single-sided IMA edge banding machine for straight edges; for jointing, gluing, and finishing various edge materials. Fixed stop side on the right. WORKPIECE & MATERIAL DIMENSIONS: Min. workpiece length : 150 mm Min. workpiece width : 65 mm Min. workpiece thickness : 8 mm Max. workpiece thickness : 40 mm (with corner rounding / copy function) Max. workpiece thickness : 60 mm (without corner rounding / copy function) Smallest workpiece : 150 x 150 mm, or 300 x 65 mm Workpiece overhang : 38 mm Hedpewyp Nusfx Aacjnu Edge thickness min/max : 0,3 – 3,0 mm Edge width min/max : 14 – 65 mm EQUIPMENT / SPECIFICATION BASIC MACHINE - Basic machine with 80 mm wide conveyor chain as workpiece transport device - Feed speed 6 to 30 m/min, adjustable from machine control - Top pressure with pressure-loaded guided rollers and 70 mm wide V-belt - Automatic height-adjustment of top pressure (thickness) - Workpiece support with rollers, extendable up to approx. 700 mm - Infeed table IMA 63.152, 500 x 500 mm, for easy feeding of long & narrow boards - Infeed device (manually) tiltable, with 5 driven rollers from top - Adjustable infeed guide/fence via NC axis AGGREGATES / EQUIPMENT - JOINTING TRIMMING/pre-milling (08.378), 2x4.5 kW, controlled (jumping), tool-Ø 125 mm Electronic horizontal positioning - GLUING AGGREGATE 04.1570 Concept, driven glue roller with automatic feed stop in case of error, Quick-lock system for glue application unit, Glue roller lift-off when feed stops Edge feed controlled by light barrier, upper edge guide w. step-motor, electronically controlled - Automatic PUR pre-melting system 283.203 - 6-fold automatic roll-change edging magazine POST-PROCESSING SECTION - End-trimming (snipping) unit 08.42, horizontal version, 2 motors each 0,65 kW, 200 Hz For straight and chamfer cutting, max. working speed 30 m/min - Fine trimming unit 08.055, 0,66 kW 400V 200Hz, top/bottom, HSK 25 - Corner rounding 08.348, 2 motors 0,66 kW 400V 200 Hz, HSK 25 Max. working speed 20 m/min - Profile scraper 08.516, top/bottom, for multi-profile-knives, automatic positioning by step motors, max. 4 profiles, with electro pneumatic horizontal move-in/-out - Spraying devices for cleaning agent. - Flat scraper 08.521 (glue joint scraping), top/bottom - Profile (corner-) buffing 08.604, 4 motors - Buffing unit 08.617, top/bottom CONTROL / SOFTWARE: • Control system ICOS open compact • Flexible edge control • Uninterrupted power supply (UPS) • Power supply 400 V, 50/60 Hz, Control voltage 24 VDC / 230 VAC Machine dimensions (occupied area when installed) L 1150 x W 300 x H 260 cm Available: October 2025

Condition: used, machine/vehicle number: 005657, Type of edging: Thin edge, Thick edge Gluing System: PUR Premilling Unit: yes Corner Rounding Unit: yes Grooving Unit: yes Max feed speed: 30 m/min Maximum panel thickness: 60 mm Operating Units: 13 nr Hjdpfx Aajwcx Tuscsnu

Condition: used, - dimension (mm): 80 x 60 - rubber plate - mounting bracket Hnodpfx Ajbxp Easaceu

Condition: good (used), IMA LED set-up aid used in working condition. Hnodpfxsbxx Iuo Aacsu about 60 LEDs 15 pin serial port on both sides Dimensions 18 x 56.7 x 312 mm including 10 mm for the connectors Direct purchase in our internet shop on our homepage

Condition: like new (used), Hello, We are offering new Homag Benz, Homag drilling systems, Weeke, and Benz adapter units for sale. Flex 5 Plus, adjustable saw units, lock case units, tracing milling, etc. Please contact us so we can provide you with a suitable quote. Units are either new and tested or completely overhauled. Prices vary depending on the unit. The unit comes from customers who switched to 5-axis machining and no longer need it. Only tested units leave our factory. Hodpfx Aovftu Hjacenu Do you need other spare parts for older machines, or repairs for drilling gearboxes and milling spindles?

Condition: used, Milling unit Hodpoqwdufjfx Aacjnu bottom top

Year of construction: 1955, condition: used, used manufactured by IMA type B55 built in 1955 Hnjdovwf Szepfx Aacsu Masch.-No. 0/650 pressing cylinder pneumatic 4 table 2900x1300 mm working height 750 mm max. material thickness ca. 200 mm located in 97447 Gerolzhofen, free on truck, unpacked sale in current condition as seen without guarantee and warranty

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, Cosmetic Packaging IMA MS 500 EAC Shrink Wrapping Machine. for various types of packages and products with plastic feeding and thermo-contraction oven. Includes overfeeding, manual stitching device and spool holder group top and bottom. Hinge tape width 80 mm Hnjdpfx Aaswwhvnjcsu Thermo-contraction oven with output cooler and speed control. Oven tape width 480 mm SIEMENS SIMATIC OP7 Control Panel Includes manual stitching of top and bottom film. Maximum speed: 30 packages/minute Min / Max size of product: L 50/100 x H 100/300 x W 25/60 mm Min / Max size of package: L 75/330 x H 100/300 x W 50/100 mm Available documentation

Condition: used, 2 pieces available For further information please refer to the enclosed Hnjdod Tmabspfx Aacju photos.

Year of construction: 2001, condition: good (used), IMA glue part Spare part for e.g. IMA 680 / 480 /980 Edge banding unit for 4-sided gluing and all-round gluing on butt joints with: -Main pressure roller diameter 100 mm and pneum. Hodebxx Ikjpfx Aacsnu controlled squeezing roller, diameter 35 mm -Specification of adhesive for the coating of the Edge material, with temperature control and level control -Servo drive for edge transport with auto- automatic adjustment to the web speed -Hot air re-activation unit 7.5 KW, on the adhesive side -IR radiator 600 watts on the decor side the deformation of the material at small radii -pneumatically driven cutting saw -Bumping edge query -NC axis Rotation range up to 740 degrees, pneum. Z stroke 125 mm -separate NC-axis in Y (with portal in X) working independently of the main axis Year of construction of the part 2001 comes from machine IMA 680 V No. 2216 Scope of delivery as shown Please check the possibility of installation in your machine. No return possible Unit was used in production for about 2 years and can be described as good Technical information subject to change

Condition: good (used), Used IMA 863 fabric stretcher, width 240 cm, useful 220 cm, table length 16 meters, blower, new unwinding cloths. Price: € 7,000.00 Hnedpfx Aajt Ipnqjcju

Condition: used, Milling unit Fine milling unit bottom and top good condition Hnsdpfx Aajqwdu Rsceu function tested

Condition: like new (used), Year of construction: 2021, General parameters: Machine type: Edge banding machine Model: Novimat Compact R3/L12 Year of manufacture: 2021 Manufacturer: IMA Schelling Group Total machine length: 7 m Intended use: Industrial edge processing with high precision Key features: Automation of basic functions for easy operation by one person Massive frame construction for high stability Electronically adjustable upper pressure path Two-band pressure belt for safe guidance of short parts IMA quick glue change system Program-controlled feed speed Multi-profile technology possible with automatic profile change Hnodpfxov D Rhue Aaceu Touch control via 21.5" industrial PC Technical parameters: Part thickness: 8–60 mm Minimum part length: 150 mm Minimum part width: 65 mm Maximum edge band height: 65 mm Edge types: Paper, plastic, veneer (with optional protective coating) Strip thickness: 0.3–3 mm Working speed: 20 m/min Machine equipment: Pre-milling unit with diamond tools Cutting unit with automatic tilting (15° inclination) Milling and copying units with automatic adjustment Edging system with PUR glue option Upper and lower spray system for cleaning and maintenance of the part Rounding and polishing units for final edge treatment ICOS open control system with touch screen

Condition: used, Year of construction: 2004, Used 75 Litre IMA Model VORTEX 075 stainless steel mixer granulator. Total bowl capacity 75 litre, working capacity approx. 20 - 50 litre. Has jacketed bowl. Main impeller driven by 3,0 kW motor. Chopper blade driven by approximately 1.5 kW motor. Bowl cover is opened using with pneumatic cylinder . Also has top mounted stainless steel dust filter. Side discharge outlet with pneumatically operated valve. Includes local control panels and main switchboard. Hnodpfswm Atmsx Aacou

Condition: used, Milling and bevelling unit make: IMA Hnjdpobxp Nujfx Aacsu - for double sided edge banding machine (1 unit left side / 1 unit right side)

Condition: good (used), Year of construction: 2001, and Edgebanding Machine IMA HKA The IMA HKA Hand Edgebanding Machine is a versatile device for manually applying edge strips or veneer strips to flat workpieces. It is suitable for materials such as chipboard, blockboard, and MDF. The machine can be used both manually and with a processing table, providing high flexibility in application. Year of manufacture: 2001. If you require vacuum clamps, they are available new and used in our shop. The HKA consists of two main components: 1. Handheld unit: Automatically feeds the edge strip, applies glue, and presses it onto the workpiece. 2. Processing table: Includes a vacuum pump, temperature regulator, and various control elements. The handheld unit can be suspended on a balancer to facilitate operation. Operating Methods: • Guided workpiece: The handheld unit is mounted on the processing table, and the workpiece is manually moved. Hedpfx Aov N Nn Doacsnu • Guided handheld unit: The workpiece is fixed with vacuum clamps, while the handheld unit is guided manually. Technical Data: • Working width: 90 mm • Edge thickness: 0.4 - 3 mm • Panel thickness: 16 - 45 mm • Edge strip feed: 20 - 50 mm • Power consumption: 2.6 kW • Vacuum pump capacity: 6 cbm/h • Minimum outer radius: Depending on the bending suitability of the edge material • Minimum inner radius: 150 mm, depending on material properties Optional Accessories: • Boom for attaching a balancer • Vacuum clamping table

Condition: good (used), Year of construction: 2011, UNLOADING OF ELEMENTS IMA P620 This is a device that allows you to automate the drilling process. ELEMENT TRANSPORT BELTS Transport of elements is carried out by means of feeding tables equipped with transport belts. The device has the ability to configure the layout of the tables. POSITIONING OF THE RECEIVER The gantry system is equipped with linear guides by means of which the element is transported from the infeed table to the roller table. ELEMENT ROTATION The device has the ability to rotate the receiver in the X axis by 90 degrees. An additional advantage are suction cups, which ensure precise grip of the element. TECHNICAL SPECIFICATIONS: Performance(without 90-degree rotation): About 18-20 cycles / min. Hnodpfx Aasifzq Nscju Performance(with 90-degree rotation): About 14-16 cycles / min. Part types: Particleboard / MDF coated on both sides. Max. element length: 2500 mm Min. element length: 250 mm Max. thickness of the element: 40 mm Min. element thickness: 8 mm Max. width: 1300 mm Min. width: 100 mm Max. board weight: 50 kg Max. stacking dimensions: 2500 x 1300 x 1600 mm We invite you to contact us by phone

Condition: used, milling unit profile milling unit controlled Hjdpfxengz Awe Aacjnu 2 kW functionally tested