Edgebander

IMA NOVIMAT/CONTOUR/I/G80/700/L20+

Condition: not inspected (used), Year of construction: 2012, functionality: unexamined, cutting width (max.): 4,500 mm, feed rate X-axis: 140 m/min, section length (max.): 2,200 mm, Equipment: CE marking, scorer, TECHNICAL DETAILS The machine is equipped with two saw carriages. The technical specifications apply to both: Dsdsyxn Adspfx Ag Dokk Maximum panel width: 4,500 mm Maximum panel length: 2,200 mm Maximum saw unit tool diameter: 380 mm Maximum scorer tool diameter: 200 mm Saw blade protrusion: 95 mm Number of rip saw grippers: 5 Number of cross cut saw grippers: 8+4 Maximum feed speed: 140 m/min Saw unit 1 connected load: 15 kW Saw unit 2 connected load: 15 kW Scorer unit 1 connected load: 2.2 kW Scorer unit 2 connected load: 2.2 kW MACHINE DETAILS Control system: WINDOWS 10 Machine programming software: Biesse-OSI EQUIPMENT Second flexible push system Quick-change system for saw blades Label printer for barcodes CE marking The machine is sold and delivered in its actual and legal condition (“as seen and approved”), based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for installation, safety, and operation of the machine at the place of destination. External reference: 5711

Year of construction: 2007, condition: not inspected (used), functionality: unexamined, total length: 5,700 mm, total width: 1,000 mm, workpiece length (max.): 2,000 mm, workpiece width (max.): 800 mm, Equipment: CE marking, TECHNICAL DETAILS Maximum panel width: 800 mm Minimum panel length: 140 mm Maximum panel length: 2,000 mm Conveyor length: 5,700 mm MACHINE DETAILS Dimensions (L x W): 5,700 x 1,000 mm Return of parts to edge banding machine: Left Panel outfeed: via air cushion table Panel feed: via motorized conveyor belt EQUIPMENT CE Safety Standard Dedpfx Ajyzzhxsg Dskk The machine is sold and delivered in its actual and legal condition ("as seen and approved"), based on photographic documentation and technical/commercial descriptive documents. The buyer has the right to inspect the goods prior to collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 6200

Condition: not inspected (used), Year of construction: 2006, functionality: unexamined, rotational speed (max.): 2,970 rpm, workpiece length (max.): 2,500 mm, workpiece width (max.): 1,000 mm, Equipment: CE marking, TECHNICAL DETAILS Max. panel width: 1,000 mm Max. panel length: 2,500 mm Min. panel length: 250 mm Min. panel width: 100 mm Dkedeyzy T Tjpfx Ag Dok Number of vertical lower groups: 5 Number of vertical upper groups: 1 Lateral horizontal groups: yes Number of pressure elements: 5 Number of horizontal lateral groups: 2 Motor power: 1.5 kW Speed: 2,970 rpm MACHINE DETAILS System control: TOPDRILL Machine programming software: WOODWOP Total installed power: 35 kW EQUIPMENT Lateral horizontal groups CNC positioning of the groups CNC positioning of the Z-axis Safety standards with CE marking Safety light barriers Automatic chip extraction The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photo documentation and technical/commercial reference documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for installation, securing, and operation of the machine at the destination. External reference: 6157

Condition: not inspected (used), Year of construction: 2006, functionality: unexamined, travel distance X-axis: 4,400 mm, travel distance Y-axis: 1,300 mm, feed rate X-axis: 40 m/min, feed rate Y-axis: 45 m/min, Equipment: CE marking, The machine has the following configuration: Drilling units: Upper unit with 30 vertical and 6 horizontal spindles Milling unit 1: Upper unit, 5 controlled axes, 7.5 kW motor power, liquid cooling system Milling unit 2: Upper unit, 11 kW motor power, 18,000 rpm, liquid cooling system Tool magazine 1: 24 positions, mounted at the rear of the machine Dksdeyzy S Njpfx Ag Dsk Tool magazine 2: 6 positions, mounted on the working head TECHNICAL DETAILS X-axis travel: 4,400 mm Y-axis travel: 1,300 mm Maximum workpiece pass-through height: 400 mm X-axis traversal speed: 40 m/min Y-axis traversal speed: 45 m/min Z-axis traversal speed: 22.5 m/min MACHINE DETAILS Control system: WINDOWS Machine programming software: XILOG Vacuum pump individual capacity: 250 m³/h Connected load: 35 kW EQUIPMENT Worktable with vacuum rail supports Number of vacuum rails: 8 Vacuum clamping for workpiece CE safety standards Automatic chip extraction The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and operation of the machine at the destination. External reference: 8340

Condition: not inspected (used), Year of construction: 2016, functionality: unexamined, edge thickness (max.): 22 mm, rotational speed (max.): 12,000 rpm, Equipment: CE marking, The machine has the following configuration: Dkjdpoyxndbsfx Ag Dsk Pre-milling unit Automatic, timer-controlled intervention and positioning via NC Edge preheating lamps Edge band magazine Glue pot for EVA hot-melt adhesive Premelter for EVA hot-melt adhesive QM-705 End trimming unit IN-801 Number of motors: 2 Top and bottom flush trimming unit RS-100 Number of motors: 2 Motor power: 2 kW Speed: 12,000 rpm Fine finishing and contour trimming unit RF-100 Number of motors: 2 Motor power: 2 kW Speed: 12,000 rpm Corner rounding unit AR30 Number of motors: 2 Motor power: 0.8 kW Speed: 12,000 rpm Automatic, timer-controlled intervention End cutting unit RB02 Positioning by NC Glue scraping unit RCC-701 Polishing unit SP-501 Number of motors: 2 Motor power: 0.25 kW Spraying unit LPT-700 TECHNICAL DETAILS Panel height min: 10 mm Panel height max.: 60 mm Edge thickness min.: 0.4 mm Edge thickness max.: 22 mm MACHINE DETAILS Total connected load: 22 kW EQUIPMENT Feed pressure with rubber belt Panel support guides with NC positioning CE marking The machine is sold and delivered as is (“as seen and approved”) based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and use of the machine at the place of destination. External reference: 7673

Condition: excellent (used), SINGLE-SIDE EDGE BANDER (LEFT-side) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Edges thickness in stips / lippings (min/max) mm 0.8 / 20 Panels thickness (min/max) mm 8 / 60 Numerical Control ICOS Open Feeding speed (adjustable) m/min 6 - 30 Top pressure system with rubber belt Safety and sound-proof enclosures/cabins OPTIONAL: Panels in-feed system 63.152 (mm 500 x 500) In-feed fence, adjustable by N.C. Pre-milling Unit (vertical joint trimmers) 08.379 (2 x Kw 4,0) adjustable by N.C. Glueing Unit (EVA Glue) 283.1513 Band Pressure zone + Edge coils supporting unit (No. 1+2 reels) Snipping (end-cutting) unit 08.42/30/B (Kw 0,66 x 2) speed 30 m/min (0°-25°) Fine Trimming unit 08.055 (Kw 1,85 x 2) 0°-25° Dkodpfx Ageyxl Sij Dsk Multi Function Unit (Profile contour Trimming unit) SKF-L (2 x Kw 0,18) + (2 x Kw 0,4) Profile edge scraping unit 08.519 Glue scraping unit 08.521 Spraying Unit (for polishing liquid) Buffing unit 08.617-2 (Kw 0,18 x 2)

Condition: excellent (used), SINGLE-SIDE EDGE BANDER (LEFT-side) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Edges thickness in stips / lippings (min/max) mm 0.8 / 20 Panels thickness (min/max) mm 8 / 60 Numerical Control ICOS Open Feeding speed (adjustable) m/min 6 - 30 Top pressure system with rubber belt Safety and sound-proof enclosures/cabins OPTIONAL: Panels in-feed system 63.152 (mm 500 x 500) In-feed fence, adjustable by N.C. Pre-milling Unit (vertical joint trimmers) 08.379 (2 x Kw 4,0) adjustable by N.C. Glueing Unit (EVA Glue) 283.1513 Band Pressure zone + Edge coils supporting unit (No. 1+2 reels) Snipping (end-cutting) unit 08.42/30/B (Kw 0,66 x 2) speed 30 m/min (0°-25°) Fine Trimming unit 08.055 (Kw 1,85 x 2) 0°-25° Multi Function Unit (Profile contour Trimming unit) SKF-L (2 x Kw 0,18) + (2 x Kw 0,4) Profile edge scraping unit 08.519 Glue scraping unit 08.521 Spraying Unit (for polishing liquid) Dkjdpfjyk Tkvjx Ag Dek Buffing unit 08.617-2 (Kw 0,18 x 2)