Used Idx 23 for sale (19,787)

Condition: used, mileage: 600,023 km, power: 235 kW (319.51 HP), first registration: 09/2008, fuel type: diesel, number of seats: 52, gearing type: automatic, emission class: euro5, color: white, brakes: retarder, Equipment: ABS, air conditioning, parking heater, General - Engine: MAN - Emission standard: EURO 5 - Total seats: 52 - Seating arrangement: 44+7+1 high/fixed - Standing capacity: 80 - Transmission: Automatic Safety * Retarder * ABS, ASR, EBS * Fog lights Passenger compartment * Auxiliary heater * Air conditioning * Driver's microphone * Pram/stroller space * Wheelchair ramp * Wheelchair area Podpoxtr Nuefx Ag Dogw * Stop request button Audio, Communication, Electronics * Radio, CD Exterior * Matrix/destination display Lawo * Number of double-width doors: 4 * Lifting/lowering system * Power steering * Tachograph card * Sun visor * Electrically adjustable exterior mirrors * Roof hatches * Roof fans * Roof ventilator Miscellaneous * German registration certificate * Twin tires * Vehicle length: 17.90 m * Vehicle width: 2.50 m * Vehicle height: 3.10 m * Hubcaps * Tyres, front axle approx. 50% * Tyres, middle axle approx. 50% * Tyres, rear axle approx. 50% Our internal vehicle number: 11945 Subject to errors. Images and text may differ from the actual vehicle. Always over 300 vehicles available.

Condition: used, mileage: 19,209 km, power: 84 kW (114.21 HP), gearing type: mechanical, first registration: 07/2024, color: white, number of seats: 5, Equipment: ABS, air conditioning, navigation system, Our internal vehicle number: 1159 Mercedes-Benz Sprinter 311 CDI Mobility 23 Power: 84 kW Pgedpfx Agoxwr Ais Dsw Emission Standard: Euro 6E Vehicle Category: M1 First registration: 07/2024 Mileage: 19,209 km * Manual transmission * Braun lift installed * 3+2 seats * Fixed step * Manual sliding door * Rear-view camera * Surround view * MB multimedia system * Air conditioning * Heating * Nozzle ventilation * Airline track system * 3-point seatbelts * Storage compartment * Low original mileage * Sale without wheelchair belts Note: The customer is required to independently verify the condition and equipment of the goods / vehicle! All information subject to change and without guarantee. Interim sale reserved. We refer to our General Terms and Conditions (GTC).

Condition: excellent (used), Year of construction: 2012, Fanuc S2000 i 100B (2012) nr. 23 Clamping force: 100 t Screw diameter: 40 mm Distance between tie bars V: 410 mm Distance between tie bars H: 460 mm Type: Horizontal Pjdjw Axbrepfx Ag Dsgw Drive: Electric Hours: 32426

Condition: excellent (used), Four-side planer SCM Compact 23 Working width: 230 mm Working height: 120 mm Number of spindles: 4 Spindle arrangement: Pjdpfsxyv A Esx Ag Djgw Bottom Right Left Top Spindle speed: 6000 rpm Two feed speeds: 6–12 m/min Adjustable spindles

Condition: used, Year of construction: 2002, Weinig four-sided planer max. planing width 230mm max. planing height 120mm Digital positioning Pgjdpsxg Nbusfx Ag Dew 5 stations + 1 output unit for rounding or chamfering Total power 43kw 380V

Condition: good (used), Planing width 20-230mm Planing height 8-160mm Number of heads 6 Arrangement of heads Bottom Right Left Right Top Bottom Drawing rollers in work table 4 Pgsdpfx Agevbwzvj Djw Pneumatic pressures hydraulic feeder

Condition: as good as new (ex-display), Year of construction: 2024, Carriage length: 2300 mm Cutting width at rip fence: 900 mm Cutting width at crosscut fence: 2310 mm Cutting depth: 100 mm Scorer: no Saw blade swivel range: +45° Saw blade height adjustment: handwheel Psdpfxsxrbh Dj Ag Djgw Saw blade swivel adjustment: handwheel Rip fence adjustment: manual Saw blade angle display: scale Cutting height display: - Rip fence display: scale Crosscut fence display: scale Scorer adjustment: manual Saw blade diameter: 310 mm Speeds: 3500 rpm Motor power: 5 kW Extraction port: 80 and 120 mm Machine length: 3500 mm Machine width: 2200 mm Weight: 380 kg

Condition: used, mileage: 61,019 km, power: 84 kW (114.21 HP), fuel type: diesel, gearing type: mechanical, first registration: 07/2024, color: white, number of seats: 5, Equipment: ABS, air conditioning, navigation system, Our internal vehicle number: 1158 Mercedes-Benz Sprinter 311 CDI Mobility 23 Power: 84 kW Emission class: Euro 6E Vehicle class: M1 First registration: 07/2024 Mileage: 61,019 km * Manual transmission * Braun lift installed * 3+2 seats * Fixed step board Pedpfxsxwr Avs Ag Dogw * Manual sliding door * Reversing camera * Surround view * MB multimedia system * Air conditioning * Heating * Jet ventilation * Airline track system * 3-point seat belts * Storage compartment * Original mileage * Sold without wheelchair belts Note: The customer is responsible for independently checking the condition and equipment of the vehicle! All information provided without guarantee We reserve the right to prior sale Please refer to our terms and conditions

Condition: used, functionality: fully functional, Year of construction: 2018, overall weight: 1,550 kg, total height: 2,400 mm, total length: 1,200 mm, total width: 1,220 mm, load capacity: 23,000 kg, winch Producing company Manitou Pgjdsxpyb Djpfx Ag Dow Type Treuil 23 TON Year built 2018 Height (mm) 2,400 Length (mm) 1,200 Lifting weight (kg) 23,000 Weight (kg) 1,550 Width (mm) 1,220

Condition: excellent (used), color: red, lifting height: 33,000 mm, Year of construction: 2021, operating hours: 1,146 h, Drivetrain Drive: Wheel Weights Empty weight: 3.475 kg Functional Lifting capacity: 1.500 kg CE mark: yes Condition Technical condition: very good Visual appearance: very good Other information Delivery terms: EXW Transport dimensions (LxWxH): 9,2x2,27x2,63 Production country: DE Additional information Please contact Vink Machinery for more information Klaas K23/33 TSR * 2021 * Diesel drive * 1146 working hours * 33-meter hook height * 23-meter horizontal reach * Remote control * Equipped with 2 work lights Pgedpfjxfrh Isx Ag Djw * 1500 kg lifting capacity * Wheel drive * Prepared for a man basket * Includes documents

Year of construction: 1999, condition: ready for operation (used), General Data Pedpfx Agexn U Ame Dogw Machine weight 3200kg This WEINIG Unimat 23 E was manufactured in 1999, designed for efficient wood planing. Ideal for woodworking professionals looking to enhance their production capabilities. Contact us for more information. Application Types Planing

Condition: not inspected (used), Year of construction: 1977, functionality: unexamined, Max. working width: 740 mm Max. pass-through width: 820 mm Motor: 2.2 kW Pgjdpfx Asxuggweg Dew 23 drilling spindles Horizontal drilling depth: 120 mm Vertical drilling depth: 80 mm Weight: approx. 350 kg

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, Table lenght 2000 mm. Workingwidth: max. 230 mm / min. 18 mm. Workingheight: max. 150 mm / min. 8 mm el height adjustable Speed 7-36 m/min. 3,7 kw motor, cardan 5 pcs. Ø 40 mm. spindels: b + r + l + t + b (specifikations see file attached Siemens touchscreen see all technical features attached file Pedpoxr U Azsfx Ag Degw

Condition: good (used), Year of construction: 1982, functionality: fully functional, machine/vehicle number: 55453, ACIERA 23 CNC DRILLING MACHINE With Aciera ISO30 quick-change system Machine tested and 100% functional Excellent price-performance ratio WITH CNC HEIDENHAIN TNC 125 Technical data Drilling capacity in steel 23 mm Thread cutting in steel M18 Spindle speeds: infinitely variable from 45 rpm to 4000 rpm Spindle stroke 120 mm Table length 590 mm Table width 320 mm Distance between table and spindle min. 110 mm Distance between table and spindle max. 570 mm Working path lengthwise 500 mm Transverse travel 300 mm Feed rates 0.02-0.6 mm/min Connection 50 Hz 3x 380 Volt Power 4.0 kWA Machine weight approx. 2110 kg Machine dimensions: length 1700 mm, width 1400 mm, height 2100 mm Technical data not binding. ACIERA 23 CNC DRILLING MACHINE With Aciera ISO30 quick change system Machine tested and 100% functional Excellent price-performance ratio WITH CNC HEIDENHAIN TNC 125 Technical data Drilling capacity in steel 23 mm Thread cutting in steel M18 Spindle speeds: continuously variable from 45 rpm to 4000 rpm Spindle stroke 120 mm Table length 590 mm Table width 320 mm Distance between table and spindle min. 110 mm Distance between table and spindle max. 570 mm Longitudinal travel 500 mm Working distance across 300 mm Feeds 0.02-0.6 mm/min Connection 50 Hz 3x 380 volts Power 4.0 kWA Psdpeu Tn Raofx Ag Degw Machine weight approx. 2110 kg Dimensions machine: length 1700 mm, width 1400 mm, height 2100 mm Technical data non-binding.

Condition: used, functionality: fully functional, Year of construction: 2019, overall weight: 1,550 kg, total height: 2,580 mm, total length: 1,200 mm, total width: 1,240 mm, load capacity: 23,000 kg, winch Producing company Manitou Type TREUIL 23 Ton Year built 2019 Height (mm) 2,580 Length (mm) 1,200 Pgjdpfxexpya He Ag Dew Lifting weight (kg) 23,000 Weight (kg) 1,550 Width (mm) 1,240

Condition: used, Year of construction: 1980, used, in top condition Make: Raimann Model: K 23 Year of manufacture: 1980 Chain width: 250 mm Cutting width: approx. 230 mm Cutting height: approx. 120 mm without pressure bar / with pressure bar 110 mm Feed speed max. 8 - 35 m/min steplessly adjustable Saw blade diameter: 360 mm x 80 – bushing Shaft diameter: 65 mm Minimum workpiece length: 290/750 mm Extraction connection D 200 mm Space requirement: approx. 2400 mm x 1500 mm x 1600 mm Weight: approx. 2100 kg Pgsdpfx Agsxuv Nuj Dsw Total connected load: approx. 75 A Location: 97447 Gerolzhofen, free loaded, unpacked Handed over in as-is condition, as inspected No guarantee or warranty

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, workpiece height (max.): 120 mm, workpiece width (max.): 240 mm, number of spindles: 5, Equipment: cabin, motor brake, SCM Superset 23, 5 spindles, 5th spindle below, programmed motorized width and height adjustment, automatic lubrication Pjdpfx Aexy Hmbog Degw

Condition: used, Year of construction: 1971, Technical details: bore capacity in steel (diameter): 23 mm workpiece height max.: ./x. 2 mm drill capacity in cast iron: Ø 26 mm spindle taper: MK 3 bore spindle stroke: 135 (manual/automatic) mm range drill spindle revolution per minute: 7step U/min feed range: mm/U Table dimensions: 1200 x 500 mm Psdpfev Ay T Dsx Ag Djgw table surface area: 1070 x 400 mm total power requirement: 3,55 kW weight of the machine ca.: 1,4 t dimension machine xH: 1,7 x 1,2 x 2,2 m Jib Length Arm: -vertical adjustment: 450mm and horizontal adjustment: 610mm -swiveling 360°, hydr. lock Right/left rotation for thread cutting with automatic switchover Operation via control panel Coolant tank with pump *

Condition: good (used), WEINIG Unimat 23 four-sided planer Pgodpfoiq Dphjx Ag Dew max planing width 230mm max planing height 140mm spindles diameter 40mm 8 spindles ( last 2 universal) Spindles fully adjustable up and down; right and left Feed on cardan shafts with smooth adjustment 5 pulling rollers in the tabletop electric height adjustment of rollers sturdy planer, proven in good condition length of the machine 605cm, weight +-5000kg

Condition: used, Number of spindles 6 St. Working width 230 mm Working height 120 mm Length of the planing table 2500 mm Feed motor 3 kW Feed speed 5-24 m/min. total power requirement 27 kw Dimensions (L/W/H) 3900 x 2200 x 2000 mm weight of the machine ca. 2500 kg Weinig Profimat 23 four-side planer, window version with glazing bead removal or can be used as a grooving spindle ATS control and program control ----- Machine was factory overhauled by Weinig in 2024. Technical Specifications Summary (Please inquire about any additional accessories included) ----- General ----- > Working width: 230 mm > Working height: 120 mm > Number of spindles: 6 > Planer table length: 2500 mm > Feed motor: 3 kW > Feed speed: 5-24 m/min > Total power requirement: 27 kW > Dimensions: 3900 x 2200 x 2000 mm > Machine weight, approx.: 2500 kg Spindle arrangement ----- > Spindle 1: bottom > Spindle 2: right, pneumatically timed up-down > Spindle 3: left > Spindle 4: top > Spindle 5: bottom > Spindle 6: pneumatically timed up-down glazing bead saw Spindle Description ----- > Spindle 1: 4 kW, 6000 rpm, 40 mm diameter > Spindle 2: 7.5 kW, 6000 rpm, 40 mm diameter > Spindle 3: 6000 rpm, 40 mm diameter > Spindle 4: 5.5 kW, 6000 rpm, 40 mm diameter > Spindle 5: 4 kW, 6000 rpm, 40 mm diameter > Spindle 6: glazing bead saw 2.2 kW, 6000 rpm, 40 mm diameter Additional Features ----- > Can be used for glazing bead cutting or as a grooving machine > ATS control, automatic 2-axis positioning for width and height (left and upper spindle) with 99-program memory > Machine operation: Window package Joint control of the right spindle and the glazing bead feed via manual selector switch on the control panel > Spindles with mechanical digital display Pjdpfx Agsxpn T Uj Dogw (Technical data according to the manufacturer - no guarantee!)

Condition: used, mileage: 83,233 km, power: 235 kW (319.51 HP), first registration: 04/2020, overall weight: 26,000 kg, fuel type: diesel, axle configuration: 3 axles, next inspection (TÜV): 03/2026, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, RIO Box, LGS IV, EBA 2, ASR, ESS, MAN BrakeMatic, MAN Tronic, ASR, disc brakes, trailing axle steered/liftable, 3-seater, ASR, radio MAN Media Advanced Navi 7" incl. SD card, BTFSE for 2 telephones, Aux/USB, MAN CameraView pre-loaded HS Olympus 23 m³ suitable for household waste and bulky waste, with Terberg Terberg Omni-DEKA automatic comb tipping system for 60-1100 l containers. Comfort gearshift, central lubrication system, automatic lock Podpfxov D S Nao Ag Djgw

Condition: new, power: 125 kW (169.95 HP), fuel type: diesel, gearing type: automatic, color: white, number of seats: 23, Year of construction: 2025, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, soot filter, 2 x 517 Sprinter Lord Comfort Low-Floor Vehicles available for immediate delivery. Equipped with GSR2 systems, mandatory since July 8, 2024. Many competitors offer vehicles without these systems! 2 vehicles in stock: - 1 with flat floor - 1 with half podium (no wheel arch) and lowered luggage compartment. Base vehicle: - 125 kW Euro 6 e engine - 9-speed automatic transmission - Front air conditioning - Auxiliary heater - Driver’s suspension seat with seat heating - Roof marker lights - Driver comfort package - Length: 7,336 mm - Reversing camera and PDC front and rear (parking package) with front camera - Blind spot assist - Turn assist - MBUX 10-inch (radio with Bluetooth, CarPlay, touchscreen) - Tire pressure sensors - Attention assist - Active lane keeping assist - Start information assist - Intelligent speed assist - Distance assist - Rain sensor Pedpfx Agexu Rg Io Dsgw - Electric exterior mirrors - Cruise control Interior conversion: - Thermal and acoustic insulation - Rear extension by 500 mm, total length 7,886 mm - Electric outward swinging door with lowered entry - 22+1+1 passenger seats / sleeper seats - Total capacity: 22 passengers + tour guide + driver (can be reduced to 19+1 on request) - VIP black-tinted glazing (double glass) - Convector heating in passenger compartment - Roof hatch - Simple luggage racks left and right - USB ports at every seat row - Webasto air conditioning in passenger compartment (second compressor) - White/orange interior lighting in passenger area - Curtains - Attachments painted in body color Net export possible.

Condition: good (used), mileage: 71,000 km, power: 188 kW (255.61 HP), first registration: 06/1986, overall weight: 14,000 kg, fuel type: diesel, empty load weight: 13,295 kg, fuel: diesel, gearing type: mechanical, operating hours: 1,225 h, Magirus Turntable Ladder DLK 23/12, Year of manufacture: 1986 Operating hours: 1,225, last inspection at 1,197 operating hours (28 hours ago) Total weight: 14 t Unladen weight: 13.295 t Swing seat Psdpeu Ehkyjfx Ag Dogw Differential lock Automatic tire chains Power steering ABS German registration Mileage according to odometer Vehicle preferably sold to commercial traders or for export, private buyers subject to prior approval Sale without warranty Net price for export Net: 9,000 EURO + (19% VAT) 1,710 EURO = Gross: 10,710 EURO The above information is non-binding; errors/changes and prior sale excepted! Phone: 08026/2188

Condition: used, Working width 230 mm Working height 15-120 mm Number of spindles 2 St. Weinig Hydro Planer Type Uniplan 23 ----- Machine was factory overhauled by Weinig in 2024. Description: For two-sided horizontal woodworking with two working spindles. Spindle arrangement: horizontal, bottom and top. Pgodpfoxpn Tzsx Ag Dsw The two horizontal spindles are equipped with hydraulically tensioned counterbearings without axial adjustment. Built-in straight jointers on both spindles with automatic stone feed, remotely controlled with the hood closed. Machine with continuous, chainless feed, equipped with rubber rollers. Electric up/down adjustment of the spindles according to a mechanical digital display (SIKO). On/off switch for limiting the up/down adjustment. Feed roller pressure pneumatic. Stops and table tops are not adjustable. Machine with steel table tops. Machine with full enclosure and integrated sound and dust protection including interior lighting. Electrical design according to DIN VDE 0113, electrical equipment of industrial machines EN 60204, IEC - 204 - 1. Other electrical regulations are not taken into account. Machine includes operating tools, but does not include machining tools. The Weinig Uniplan spindles operate at a speed of 7200 revolutions per minute. Before using existing tools, please check that they are suitable for the speed. Please also consider this when ordering new tools. Technical specifications Max. working width: 230 mm Min. working height: 15 mm, max.: 120 mm Feed: 3 kW (4 HP) Horizontal spindles each: 7.5 kW (7.5 HP) Infinitely variable feed speed: 6 - 36 m/min. Spindle speed: 7,200 rpm Spindle diameter: 50 mm Tool clamping length: 240 mm Maximum tool radius: 163 mm Fixed clamping clearance at bottom: 0.5 mm (Technical data according to the manufacturer - no guarantee!)

Condition: used, Number of spindles 8 St. Working width 230 mm Working height 120 mm Weinig Planing and moulding line ----- Consisting of the following individual machines: Item 1: Weinig Profimat 23 E, four-side planer, stock number: 2803 5 spindles + glazing bead saw Item 2: Weinig Uniplan 23, stock number: 2804 Fine and hydroplaner with 2 horizontal spindles Item 3: Weinig RF 15, stock number: 2805 Longitudinal-cross-longitudinal conveyor with workpiece return to the operator Detailed descriptions of the machines can be found under the mentioned stock numbers. Podpsxpn Tujfx Ag Dogw (Technical specifications according to the manufacturer, without guarantee!)