Used Hydraulic Cutting Shears for sale (26,805)

Condition: used, functionality: fully functional, This listing is for an industrial guillotine shear designed for cutting sheet metal with a maximum cutting length of 3040 mm and a maximum cutting thickness of 12 mm. The machine is equipped with a motorised back gauge with an adjustment range of 1000 mm, allowing precise positioning of the material. Duedpfoylzcisx Acxjp The shear is fitted with 17 hold-down clamps to secure the material during cutting. The total connected electrical load is approximately 23 kW, operating at 400 V and 50 A. The machine weighs around 11 tonnes, with additional weight from attachments and accessories. Machine dimensions are approximately 4.5 m (length) x 4.0 m (width) x 2.2 m (height). Transport dimensions are about 5.0 m x 2.25 m x 2.2 m. Safety features include bright orange guards covering the moving parts in the upper cutting area and yellow safety fencing on the right side. Metal supports on the front bed help to hold the material securely during operation. The machine shows normal signs of wear consistent with industrial use, such as surface scratches and dirt. It is currently located in a well-lit industrial workshop environment, with visible hydraulic and mechanical components on the right side.

Year of construction: 2005, condition: ready for operation (used), A hydraulic CNC plate shear Baykal is available. Cutting length: 3060mm, max. sheet thickness (St42): 10mm, operating pressure: 260bar, stroke rate: 12/min. Machine dimensions X/Y/Z: approx. 4000mm/2600mm/2000mm, weight: approx. 9600kg, control system: Delem DAC 310. Documentation available. On-site inspection is possible. Duodpfx Acoya Hwzoxjp

Condition: ready for operation (used), Year of construction: 2018, Width: 1860mm, depth: 800mm, height: 1900mm, weight: approx. 2.3t Rectangular notchers: 57 x 100mm, triangular notchers: 5 x 5 x 7.5mm. Notching station width: 330mm, working height: 915mm Duedpfx Acsrxflcoxop

Condition: used, Hydraulic Plate Shear LVD Type HST-C 31 / 6 Machine No. 21348 Year of manufacture: 1994 Cutting length: 3,100 mm Cutting thickness: 6.35 mm Backgauge: 770 mm Working height: 950 mm Hydraulic sheet hold-downs: 17 units Hydraulic tank capacity: 150 liters Motor power: 7.5 kW Power connection: 400 Volt, 50 Hz, 9.5 kW, 19 Amp. - Motorized backgauge with digital actual position display ELGO - Backgauge adjustment via push button – rapid in both directions and fine adjustment by jogging in the minus direction only - Sheet lifting device below the backgauge with pneumatic lifting cylinder - Continuously adjustable blade gap from 0.1 mm via handwheel with analog display - Cutting angle adjustment in 5 steps from 1.5° to 3.5°, electrically pre-selectable - Left side angle stop 1,500 mm Duodpfx Acotvb Iusxsp - 2 table extensions as sheet supports - Electric foot switch - Comprehensive operating manual Space requirements without front table extension (L x W x H): 4,150 x 1,850 x 1,900 mm Space requirements with front table extension (L x W x H): 4,150 x 2,850 x 1,900 mm Weight: 5.5 tons Good condition Very good cutting results, including with thin sheet metal

Condition: used, Year of construction: 2008, sheet width 3200 mm plate thickness 6 mm distance between columns 3200 mm back stop - adjustable 20 - 600 mm dimensions ca. 4010 x 1610 x 1620 mm engine output 7,5 kW Djdpfx Aeqva Rzjcxoup Control eView weight of the machine ca. 7,2 t CNC swing cut panel shears electrical components from Siemens, ABB and Mitsubishi, Pilz safety control hydraulic components made in Italy 3 support arms and 1 angle stop Ball rollers in the table Operating instructions available

Condition: good (used), Year of construction: 1980, Hydraulic guillotine shear ATLANTIC ATS 306, No. A 10105, year of manufacture 1980s, working capacity 6 x 3,050 mm Dusdpjyhqz Tjfx Acxop

Condition: excellent (used), functionality: fully functional, Cutting length: 2520 mm Sheet thickness at 400N/mm²: 4.0 mm Strokes per minute: 47 Back gauge approx.: 750 mm Throat depth: 350 mm . Very good original condition! Dujdpfx Acoyiu Dhjxjp . Equipment: Left side gauge, 750 mm Cutting gap adjustment Back gauge with vernier scale and magnifier (and light) Overload protection . Other: Both blades are sharp and have not yet been shimmed The cylinders are dry

Condition: used, Year of construction: 1992, gebraucht 1992 Dusdeyi Hppspfx Acxep 090174 März 2026, Zwischenverkau Belgien 17800 € 1 3050 mm 6 mm 11 - 25 1/min 0.5 - 3 ° 18 750 mm 11 kW 3850 mm 1750 mm 1720 mm 4600 kg 770 mm SC 5 control for: - Sheet thickness input - Automatic cutting angle and gap adjustment - Cutting length limitation - Programmable backgauge length Motorized backgauge 750 mm Downholder protection guard Foot pedal Table supports with ball bearings 1 side fence 1000 mm Operating manual in German Machine does not comply with German accident prevention regulations (UVV) or Austrian AMVO NEW BLADES

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 51600 € 975.24 € 3080 mm 6 mm 4 mm 350 mm 20 1/min 0.5 - 2 ° 16 20 to 1000 mm 200 mm/s 11 kW 125 l 3 Stk. 820 mm 494 mm 3280 mm 4100 mm 2050 mm 3650 mm Duodpfjwirwtsx Acxjp 1950 mm 7980 kg linear guided CNC touch screen D-touch 7back gauge,cutting angle,cutting gap,cutting length, quantity USB port cutting line illumination foldable ball screws for back gauge balls in table foldable finger protection, 1.000 mm side lay with T-slot, tilting cam and scale 3 support arms wit T-slots oilfilling light barrier on the back of the machine user manual in GERMAN and ENGLISH

Condition: new, neu ca. 12 - 14 Wochen ab Auf Türkei 145000 € 2740.5 € 6080 mm 6 mm 4 mm 350 mm 10 1/min 0.5 - 2 ° 29 20 to 1000 mm 200 mm/s 22 kW 200 l 5 Stk. 900 mm 630 mm 6370 mm 7300 mm Dedpfxowiqyge Acxjup 2150 mm 3400 mm 2750 mm 25500 kg linear guided CNC touch screen D-touch 7back gauge,cutting angle,cutting gap,cutting length, quantity USB port CNC controlled cutting gap adjustment by the table (patented) oil cooler manual central lubrication cutting line illumination foldable ball screws for back gauge balls in table foldable finger protection, 1.000 mm side lay with T-slot, tilting cam and scale 5 support arms wit T-slots oilfilling light barrier on the back of the machine user manual in GERMAN and ENGLISH PRICE FCA TURKEY (sample photo)

Condition: new, functionality: fully functional, Year of construction: 2026, BRAND-NEW, Fully functional Edwards T-Station 300 for sale in factory packaging, with a 1-year warranty. Dodpfxjyrr N Hj Acxoup Worldwide shipping available - request a quote! If you are looking for a vacuum pump, accessories or any vacuum technology related equipment, please contact us. We are happy to help you with purchasing, technical advice or developing custom solutions.

Condition: good (used), Year of construction: 2000, sheet width 3100 mm plate thickness 13.0 mm thickness at "Niro-steel" 8.0 mm down holder 14 Stück no. of strokes max. 11 Hub/min cutting angle 1°15 work height max. 770 mm column arm ? mm oil volume 300 ltr. control konv. total power requirement 15.0 kW weight 11800 kg range L-W-H 4255 x 2250 x 2400 mm Features: - Robust electro-hydraulic swing pruning shears - Operation, swivels to the front left Duodpsx Ni D Rofx Acxsp - Electro-motorized backgauge * on recirculating ball screws * Movement by push-button (forwards backwards) * including ELGO digital position indicator - Manual quick cutting gap adjustment * by eccentric (right side stand) - Machine stand with overhang - 1x long side stop, with mm scale - 2x front support arms, with mm scale - Ball rollers in the front support table - Hinged front finger guard - 1x free-moving foot switch - Rear safety device (protective grille) - 2x front emergency stop button - Operating instructions (PDF)

Condition: ready for operation (used), Max. workpiece thickness: 20mm, including one unused and originally packed set of blades. Djdpfx Acsim Ixfsxeup

Condition: new, HYDRAULIC SHEAR MVD MOD iSHEAR B 06-4000 COMPLETE WITH REAR PNEUMATIC SUPPORT. CNC ESA S 625 TECHNICAL SPECIFICATION Material cutting capacity 450N/mm2 06 mm Material cutting capacity 700N/mm2 04 mm Duodpfx Acofh R Insxep Cutting length 4100 mm Fixed cutting angle 1.5° Blade press cylinders 18 Strokes per minute 10 - 14 Hollow 250 mm Motor power 10 kw Millimeter square and two sheet supports 1000 mm Rear register stroke 1000 mm Approximate weight 11000 kg

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: ZH-3316, overall weight: 3,000 kg, table length: 2,680 mm, table width: 1,450 mm, Purchased new in 2021. Very good overall condition. Ideal for cutting veneer, cardboard, paper, etc., and suitable for high production volumes. All essential settings for cut quality and precision are conveniently located on the front of the machine. Highly precise motorized rear stops, controlled via the digital display on the control console. Cutting parameters are adjusted on the console and can be fine-tuned using a handwheel, allowing for quick and accurate setup. Photoelectric safety: safety sensor protects the operator during blade operation. Emergency stop with access at the front of the machine. Cutting line illumination. Stroke counter. Technical specifications: Djdpfx Aexzrfxjcxjup • Maximum cutting length (mm): 2680 • Maximum cutting width (mm): 1450 • Maximum cutting thickness for wet veneer (mm): 60 • Maximum cutting thickness for dry veneer (mm): 30 • Blade size (mm): 2680*140*12.7 • Motor power (kW): 4.37 • Machine dimensions (mm/inch): 4200*2300*1700 • Weight (kg): 25 • 380V 3PHASE 50HZ Extras: Sold with new spare blade and a new Teflon plate.

Condition: used, Year of construction: 1980, Technical data: Max. sheet width: 2500 mm Max. sheet thickness: 8 mm Dsdotvfzcjpfx Acxsup Weight, approx.: 6400 kg Equipment: · Manual back gauge · Cutting gap adjustment · Cutting angle adjustment · Cutting line illumination

Condition: good (used), functionality: fully functional, Year of construction: 1978, control type: manual, actuation type: hydraulic, working width: 3,100 mm, sheet thickness (max.): 4 mm, back gauge adjustment: motor-driven, back gauge: 999 mm, power: 11 kW (14.96 HP), input voltage: 400 V, Equipment: emergency stop, finger protection, foot remote control, safety light barrier, Darley 3100 x 4 mm hydraulic shear. Newly sharpened blades. Electric back gauge. Loadable onto a standard Euro trailer. Transport can be arranged. Weight approx. 6000 kg. Dedpfxeya U Sao Acxjup

Condition: used, functionality: fully functional, Year of construction: 1978, Used 3-meter guillotine shear from Luther Werke Model: TS H 30 6 Capacity: 3100 x 6 mm Electric guillotine shear Duodox D Uwpepfx Acxep Year of manufacture: 1978

Condition: excellent (used), Technical data: Maximum cutting width: 3100 mm Maximum cutting capacity for steel St40: 16.0 mm Motorized adjustable backgauge: 1050 mm Motorized adjustment of cutting gap Motorized cutting angle adjustment: 0.5 – 4° Working height: 860 mm Motor power: 18.5 kW Side safety guard with rear light curtain Dimensions (L x W x H): approx. 4650 x 2200 x 2050 mm Weight: approx. 13 tons Dsdpfx Acsyapbisxeup Condition: Very good condition Blades 80%, cuts sheets 1 – 16 mm The seller assumes no liability for typographical or data transmission errors. The machine is in appearance, technology, and wear consistent with its age; used machines are sold without any guarantee.

Condition: excellent (used), Brand: SOLING Model: SCR 125 Tipo: Automatic hydraulic shear Maximum cutting diamante: 20 mm Minimum cutting diameter: 6 mm Bar loader up to : 6500 mm Maximum cutting length: 1.000 mm Minimum cutting length : 180 mm Components Automatic bar loader Hydraulic cutting head Electric desk Djdpfx Ashymkwjcxsup Adjustable cutting length stop Manual

Condition: good (used), CMU HYDRAULIC SHEAR 3000X6, 300 mm RECESS, WITH MOTORIZED REGISTER, DIMENSIONS: 380 X180X 185 (h) cm Djdpfevzyw Hjx Acxsup

Condition: ready for operation (used), Press Machine, Traveling Head Cutting Machine, Punching Machine, Stamping Press, Hydraulic Gantry Press,Sanson Chiesa Turbo, Used Machine Manufacturer: Sanson Model: Chiesa Turbo Overall Dimensions: 3480 x 1040 x 2420 mm Weight: 5500 kg Electrical Data: 380V, 50 Hz Working Cylinder Diameter: 250 mm Operating Pressure: 200 bar Stroke Length: 120 mm Dedpfx Ajukpcyscxeup Pressing Surface: 900 x 1000 mm Cutting Table: 1040 x 2500 mm

Condition: good (used), Year of construction: 2008, sheet thickness (max.): 13 mm, cutting length (max.): 4,160 mm, DENER Hydraulic Shear 4100x13mm DMMH.4113 Brand: Dener Model: DMMH NC 4113 Djdowi Snxepfx Acxsup Year: 2008 Standard Control: Dener HT 071 Cutting Length: 4,160 mm Maximum Cutting Thickness: 13 mm Cutting Inclination: 2º Number of Hold-Downs: 19 Motor Power: 30 kW Cuts/min.: 8 Manual Lubricator *Shear under inspection. Blades have been removed for grinding. Hold-downs have been removed for replacing seals and gaskets. Delivered fully inspected and with a 6-month warranty.

Year of construction: 1988, condition: used, sheet width 1500 mm Djdslp U Txjpfx Acxoup plate thickness 3 mm weight of the machine ca. 4 t dimensions of the machine ca. BxTxH 2000x1500x1800 mm

Condition: excellent (used), functionality: fully functional, Year of construction: 2006, working width: 1,500 mm, sheet thickness steel (max.): 4 mm, back gauge adjustment: motor-driven, power: 7.5 kW (10.20 HP), overall weight: 3,500 kg, total length: 2,200 mm, total width: 1,800 mm, Equipment: CE marking, angle stop, documentation/manual, emergency stop, finger protection, foot remote control, safety light barrier, type plate available, Hydraulic Guillotine Shear / Sheet Metal Shear Haco SST 150 / 4, year of manufacture 2006, Technical data and features: Cutting capacity 1500 mm x 4 mm, machine length 2200 mm, width 1800 mm, weight 3500 kg. Torsionally rigid, fully welded steel frame, stainless steel blades, stroke counter, independent hold-downs, cutting line illumination, softly padded hydraulic hold-downs. Option to increase cutting speed by reducing capacity, pre-selection control for positioning the backgauge to the desired position, 1-meter angle stop with T-slot scale and a swivel stop, complete cutting table with T-slots at 1500 mm and 2000 mm, motorized swiveling backgauge with adjustment via front control panel, 650 mm stroke, etc. Dedjydfhmopfx Acxsup The machine comes from a government institution and is in top condition! Please see the photos! The machine is incoming, more photos will follow.