Used Hydraulic Cutting Shears for sale (28,421)

Condition: used, Year of construction: 1994, sheet width 3000 mm plate thickness 16 mm distance between columns 3200 mm throat 310 mm Lhsdoy S D Nmjpfx Al Ijh stroke 300 mm table width 820 mm table height over floor 1215 mm Number of downholders 12 St. cutting angle 0,5 - 2,5 ° total power requirement 30 kW weight of the machine ca. 19 t Machine was overhauled in 2010 and was modernized with light barrier at table. Machine will be sold with automatic back stop with DRO. including flat belt conveyor

Condition: used, Year of construction: 1993, Max. cutting length: 4000 mm Max. sheet thickness: 4 mm steel Controlled rear stop up to 1,000 mm side stop and table extensions cut length limit cut edge illumination safety fence, roller with safety switches Weight: approx. 8500 kg Ljdpfx Aof Nwvfel Iohh

Condition: used, Year of construction: 1983, Max. cutting length: 3,000 mm Max. sheet thickness: 8 mm steel Motorized rear stop with fine adjustment via handwheel up to 1000 mm cutting length limitation knife sharpened Weight: 6,800 kg Lhsdpfsr D Tnwox Al Ish

Condition: used, Max. cutting length: 1050 mm Max. sheet thickness: 3 mm steel Motorized rear stop up to 1000 mm with fine adjustment via handwheel Crown angle adjustment knife sharpened Lodpfsqmvlrsx Al Iohh operation manual Weight: approx. 1400 kg

Condition: new, functionality: fully functional, Sheet width: 2040 mm Sheet thickness for structural steel: 4 mm Sheet thickness for stainless steel: 2 mm Total power: 7.5 kW Back gauge: 750 mm Machine weight approx.: 2600 kg Dimensions: 2810 x 2230 x 1360 mm Standard equipment: - All-steel sheet metal welded construction with static and dynamic frame rigidity - Direct drive with braking motor - specially alloyed cutting blades - 750 mm motorized, digitally adjustable back gauge with ball screw spindles - manual blade gap adjustment system Ledozbbdfjpfx Al Ijhh - mechanical sheet metal clamping system with plastic support - work table with insert plates - foot switch for single and repeat cut cycles - 1 x squaring arm with a length of 1000 mm and a metric scale - 2 x material support arms at the front, 800 mm - front gauge - finger guard - front and rear guards - rear light protection devices - CE declaration of conformity

Condition: new, functionality: fully functional, Sheet metal width: 3060 mm Sheet metal thickness: 6 mm Stroke rate: 20 strokes/min Ljdszbbbkspfx Al Iohh Stroke: 750 mm Motor power: 11 kW Oil capacity: 160 l Machine weight (approx.): 5,500 kg Dimensions: 3860 x 2560 x 1560 mm

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, Sheet metal width: 2050 mm Sheet metal thickness: 4 mm Stroke: 41 mm/min Table height: 850 mm Machine weight (approx.): 2,900 kg Lhsdpfxszbarno Al Ieh Dimensions: 2700 x 2200 x 1400 mm

Condition: good (used), functionality: fully functional, Year of construction: 2013, Sheet width: 3050 mm Sheet thickness: 10 mm Cutting angle: 1-4 ° Backgauge – adjustable: 10 - 1000 mm Number of hold-downs: 13 pcs Ledjy H Imrepfx Al Ishh Distance from lower blade to hold-down: 25 mm Hold-down diameter: 60 mm Oil volume: 240 l Max. strokes: 24 per min. Total power requirement: 15 kW Machine weight approx.: 6300 kg Space requirements approx.: 4100x3800x2000 mm Equipment: -Accessories: -Operating hours: 6,089 h -Angle gauge -3 material support arms -NC control Elgo -Automatic cutting angle adjustment -Electric backgauge 1000 mm -Foot pedal -Light curtain behind the machine -Cutting line illumination

Condition: used, functionality: fully functional, Used guillotine shear from Donewell Lhjdpjy Nycqefx Al Ish Model: 2500 3 Steel capacity: 2500 x 3 mm Electric backgauge Adjustable cutting angle

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1994, working width: 4,050 mm, sheet thickness (max.): 8 mm, TECHNICAL DETAILS Sheet metal width: 4,050 mm Sheet metal thickness: 8 mm Control: conventional Ljdpfjzapq Dsx Al Iehh

Year of construction: 1983, condition: good (used), strip width 1.600 mm strip thickness 0,3 - 3 mm reference material (tensile strength) 420 N/mm² speed 68 m/min. at 6.000 mm plate length Lhodebidg Eopfx Al Ijh 23 m/min. at 400 mm plate length

Year of construction: 1991, condition: good (used), design: rotary shear strip width: 500 - 1.650 mm strip thickness 0,3 - 2 mm Lodpegnyy Tsfx Al Ijhh

Condition: excellent (used), Year of construction: 1982, Hydraulic guillotine shear, manufacturer KRAMER, Model: TM 3 Hydr. 2000, Year of manufacture: 1982, in very good original condition. Cutting capacity: 2000 mm x 12 mm in steel. Equipped with hold-down device, angle stop, and manual back gauge up to 750 mm, machine feet, and machine documentation available. Very good condition. Machine dimensions: width 3100 mm, depth 2450 mm, height 2250 mm, weight approx. 5500 kg. Ledpfx Aey Siftol Ijhh

Condition: excellent (used), functionality: fully functional, Year of construction: 2003, SHEARING MACHINE BL 3000 X 3/4 X 200 HYDRAULIC Lhjdpfx Alozfptbj Ish MOTORIZED BACK GAUGE USED MACHINE, IN WORKING ORDER

Condition: good (used), functionality: fully functional, Safan HT 255-4 TS hydraulic plate shear for sheet metal, in unique condition! Hardly any signs of wear are visible on the work table from the sheet metal that has been processed on it! Capacity: 4 mm over 2550 mm Easy operation, precise rear gauge digitally adjustable. Equipped with a safety guard on the rear and an emergency stop on the front. Lsdpfx Asy Uliael Ishh The machine has a support system for the cut material as well as a collection tray (not shown).

Condition: used, sheet width 1050 mm plate thickness 4.0 mm thickness at "Niro-steel" 3.0 mm distance between columns 1200 mm blade length 1150 mm no. of strokes 46 - 69 Hub/min cutting angle 1.30 ° Control konv. oil volume 100 ltr. total power requirement 5.68 kW weight 1100 kg From a maintenance workshop In good condition (!!) Features: - Robust electro-hydraulic sheet metal shear Ljdjy Raimopfx Al Iehh - Electric motor-driven backgauge * Backlash-free ball screw for backgauge * Travel speed 100 mm/sec - Electric cutting length limiter * Cutting length limiter to increase the stroke rate per minute - Manual cutting gap adjustment (lateral adjustment) - Front support table with recessed grips - Front finger/interference guard - 1x side stop with T-slot and millimeter scale - 2x front support arms - 1x freely movable foot switch - Operating instructions (PDF)

Condition: excellent (used), functionality: fully functional, Year of construction: 1997, max. sheet thickness steel (450N/mm²): 6.5 mm Ljdpfezaip Hjx Al Iehh max. cutting width: 3080 mm machine weight: 5600 kg Very good, ready-to-use condition.

Condition: used, LVD Shear Type HST C-10/31 Capacity 3000 x 10 Lhjdpsx Tqtbefx Al Ijh

Condition: good (used), functionality: fully functional, Year of construction: 2006, Used M Shear from Safan Model: M Shear 430 6 TS 200 Lhedpfxey H D I Es Al Ioh Capacity: 4300 x 6 mm Automatic setting of cutting gap, cutting angle, and back gauge Equipped with pneumatic sheet support at the rear Return to sender feature Scrap container Entry safety barrier

Condition: used, Hydr. swing cut guillotine shears HERA type HSS III No. 598 Year of manufacture 1986 Cutting length 3100 mm Cutting thickness 3 mm Stand projection 200 mm Blade strokes 25 strokes/min. Mains connection 380 Volt, 50 Hz Motor power 3 kW - Motorized adjustable backgauge 1070 mm - Actual value digital display for the backgauge - Cutting gap adjustment - Cutting length adjustment - Front side stop left 1000 mm - 4 sheet metal support arms 1000 mm - el. foot switch Lhjdsq A I Upopfx Al Ish Space requirement without sheet support arms L x W x H 3630 x 2200 x 1600 mm Weight approx. 4000 kg good condition

Condition: used, Hydraulic notching machine with adjustable angle SIMASV model AV 220-6PA Serial no.: C1524 Year of manufacture: 1996 Blade length: 220 mm Material thickness (steel): 6 mm Material thickness (stainless steel): 4 mm Table dimensions: 950 x 790 mm Table height: 940 mm Lederzfh Hspfx Al Ishh Motor power: 3 kW Power supply: 400 Volt, 50 Hz - Operation via push-button or foot switch - Adjustable notching angle from 30° to 140° - Angle adjustment via 2 handwheels (right and left) - Hydraulic clamping for the adjustable blades - Electric foot switch - 2 adjustable stop rails with angle scale - Multiple millimeter scales integrated into the table top - HSS blades newly ground, as new Required space (L x W x H): 1000 x 950 x 1470 mm Weight: 750 kg Very good condition

Condition: used, Year of construction: 1997, sheet width 3100 mm plate thickness 6.35 mm thickness at "Niro-steel" 4.00 mm cutting angle 0.5 - 2.5 ° Ledpfey I Dbbex Al Ishh cutting gap adjustment 0.05 - 0.8 mm no. of strokes 12 - 50 Hub/min back stop - adjustable 1000 mm Control DELEM DAC 360 oil volume 120 ltr. engine output 9.5 kW weight 7000 kg. range L-W-H 3950 x 1950 x 1680 mm well-maintained condition (!!) equipped with new DELEM control unit Equipment: - electro-hydraulic, guided plate shear - DELEM CNC control unit type DAC 360 * front control panel, swiveling front left - Electro-hydraulic cutting angle adjustment - Electro-hydraulic cutting gap adjustment - electro-motorized backgauge, with ball screws - 1x extra-long side fence with T-slot mm scale

Condition: used, Year of construction: 1992, Technical details: sheet width: 3050 mm plate thickness: 8 - 16 mm distance between columns: 4800 mm control for program: CNC back gauge: max. 1000 mm cutting angle: 0,5 -3,0 ° down holder: 18 Stück Total power requirement: 30 kW height over floor: 2550 mm weight of the machine ca.: 14 t Lsdsy A Rnqjpfx Al Ijhh dimensions of machine: 4,8 x 2,3 x 2,6 m

Condition: used, Year of construction: 1995, Technical details: sheet width: 3000 mm plate thickness: 12 mm distance between columns: 3500 mm control: Cybelec DNC 10 G back gauge: 1200 motorisch mm cutting angle: 1,2 - 2,73 ° cutting gap adjustment: ja mm cutting capacity : 66.000 daN daN Knife length: 3100 mm down holder: 17 Stück interface: RS232 Table dimensions: 3200 x 600 mm total connected load: 22 kW weight of the machine ca.: 11,0 + (1,0 to Anbauteile+Zubehör) t space requirements approx. LxWxH: ca. 4,5 x 2,6 x 2,1 m transport dimensions LxWxH: ca. 5,0 x 2,25 x 2,2 m The guillotine shear was put into operation for the first time in 1998. The DNC 10 G control unit was specially designed for guillotine shears. It has a numerical axis for controlling the backgauge and automatically calculates and regulates the cutting gap, the cutting angle and the cutting depth, taking into account the material to be cut. (Data from the manufacturer) Table with side stopL:930 x W:105 x H:42 mm 2 table extensions L:1600 x W:100 x 83 mm Angle fence (attached to table extension) Operation via control panel with swivel arm and foot control Equipment: Drain with rollers for clippings Lhjdpovc Amtjfx Al Ieh 2x protective grid *

Condition: used, Year of construction: 1993, Technical details: sheet width: 3150 mm plate thickness: 13 mm distance between columns: 3670 mm Knife length: 3150 mm down holder: 18 Stück back gauge: motorisch 1000 height over floor: 850 mm operating hours: 3256 Table dimensions: LxB: 3770 x 500 mm total power requirement: 30 kW weight of the machine ca.: 12,9 t dimensions of machine: 4,4 x 2,8 x 2,4 m Short stroke Continuous run Lhjdpfxeu Icnfj Al Ioh Gap lighting Hydraulic sheet metal lifting device rear light curtain Positionable backgauge *