Used Hydraulic Hacksaw for sale (15,486)

Condition: used, Hydraulic band saw (Made in Croatia), type BS 320 Year of manufacture approx. 1980 Cutting range, round: Ø 320 mm Cutting range, square: 280 x 280 mm Saw blade: 550 x 45 x 2.25 mm Material feed height: 680 mm Saw speed: 42 - 55 - 85 - 110 strokes/min Motor power: 1.8 and 2.4 kW, pole-changing Power supply: 400 Volt, Hz - Miter adjustment up to 45° - Saw motor with 2 speeds and 2 V-belt stages - Hydraulic saw arm lowering Rjdpfx Aljlqadhotsw - Hydraulic cutting pressure adjustment via throttle valve - Coolant system in the machine base Space requirement, band saw L x W x H: 1900 x 1350 x 1500 mm Width without stop: 800 mm Weight: approx. 750 kg Good condition

Condition: used, Hydr. hacksaw KASTO HBS 210 / 240 Machine no. No. 1116 145 220 Year of construction 1994 Sawing range at 90° round 210 mm flat 240 x 190 mm square 210 x 210 mm at 45° round 150 mm Rjdpfxsuqgbte Altjw Saw blade length 400 mm Number of strokes 62 / 125 strokes per min. Material support height 500 mm Motor power 0.5 / 0.75 kW Mains connection 400 Volt, 50 Hz - Drive motor with 2 speeds - Coolant pump in the machine base frame Space requirement L x W x H 1200 x 500 x 1200 mm Weight 170 kg Good condition

Condition: used, Automatic Hacksaw SILISTRA / BULMAK Type OH 254 Hacksaw with material feed Machine No. 862919 Year of manufacture: 1986 Cutting capacity - Round Ø 250 mm Cutting capacity - Square 250 x 250 mm Stroke rates 40 - 50 - 63 - 80 - 100 - 125 strokes/min. Saw blade length 450 mm Motor power 1.5 and 2.2 kW, pole-switchable Electrical connection 380 Volt, 50 Hz - Straight cutting automatic machine designed exclusively for 90° cuts - Saw motor with 2 speeds and 3 V-belt stages - Saw bow with hydraulic lowering and lifting - Hydraulic cutting pressure adjustment via throttle valve - Length stop via manually adjustable fixed stop (electrical contact stop) approx. 800 mm - Vise feed with electric feed drive using leadscrew for automatic material transport - Hydraulic material clamping with stepless clamping force adjustment - Coolant unit integrated in machine base - Electrical control cabinet positioned next to the machine Required floor space (L x W x H): 2000 x 1800 x 1400 mm Redpfjwb Hxvex Altew Weight approx. 900 kg

Condition: good (used), Year of construction: 1989, machine/vehicle number: 0172, Offer 25286 Technical specifications: - Saw blade dimensions: 400 x 35 x 2.0 mm - Cutting range - 90° round: approx. 252 mm - flat: approx. 250 x 160 mm - square: approx. 210 x 210 mm Rodpfxsw Ei Tde Altjw - 45° round: approx. 160 mm - flat: approx. 150 x 150 mm - Automatic material feed - Max. vise opening: 265 mm – miter-adjustable vise - Coolant system - Drive: 400 V / 0.65 / 1.6 kW - Required space: approx. W 1400 x H 950 x D 1700 mm - Weight: approx. 600 kg

Condition: used, Year of construction: 1980, machine/vehicle number: 258695, Lg.no. 24444 Technical data: - E.- Hydr. raising/lowering of the saw bow - Saw blade dimensions 400 x 30 x 1.5 mm - Cutting range at 90° - round approx. 210 mm - flat approx. 240 x 190 mm - square approx. 210 x 210 mm - Cutting range at 45° - round approx. 150 mm - flat approx. 150 x 100 mm - approx. 130 x 210 mm - square approx. 145 x 145 mm - Adjustable stroke speeds + cutting speeds - Stroke speeds 62 / 125 m/min - Average cutting speed 16 / 32 m/min Redpfxsu H Acye Altow - Mitre-adjustable vice with opening width up to 260 mm - E.-Mot. coolant device - Drive 400 V / 1.1 kW - Space requirement approx. W 600 x H 1250 x D 1300 mm - Weight approx. 250 kg

Condition: reconditioned (used), Year of construction: 1992, functionality: fully functional, The fully hydraulic production hacksaw has a universal hydraulic system for cutting thin and thick-walled profiles as well as solid material exclusively or alternately without changing the saw blade with the uniform tooth pitch of 3 or 4 teeth per inch. per inch. Pre-tensioned bow guide, closed oil hydraulics, triple swivel bearing, separate coolant system, infinitely adjustable hydraulic cutting pressure, lifting movement and accelerated return stroke, equipped as standard with infinitely variable mitre device as standard. Lifting of the saw bow in rapid motion. Pendulum vice for perfect saw blade utilisation. Longitudinal guide with ground and hardened guide rails for transferring the cutting pressure forces to the saw bow. Automatic limit stop. Push button operation for functions on, off and upward movement of the saw bow. Manufacturer KASTO Metal hacksaw Machine type EBS 360 U Drive power: 4,4 KW Stroke rates: 37/51/74/102 min Cutting speed: 14/20/28/39 m/min Universal hydraulics: standard Rodpfoh Ug Egox Altsw Saw feed hydraulics Cutting range round: 660 mm Cutting range flat: 360x200 mm Mitre 0-45 ° Material support height: 500 mm Weight: 820 kg. Length/width: 1915x750 mm Height: 1090 mm Saw blade dimension: 550x45x2 mm Accessories. Coolant system The function of the machines has been checked and repaired. If you have any questions, please do not hesitate to contact us. If you need a different cutting range, please let us know, as we still have other machines in stock. We reserve the right of ownership until all our claims have been paid in full. With kind regards Michael Maurath

Condition: good (used), Saxon Bag Sealer With Reverse Facility With Top Bag Cutter With Hydraulic Lift Mast Stainless Steel 230 Volt Power Supply Price € 3,950 Rsdpev Dm Epsfx Altew

Condition: excellent (used), Ideal/EBA cutting machine! In excellent condition, available for inspection and testing at our location. Comes with an extra blade! Redjy Uhlqopfx Altjw All the equipment mentioned is not for sale/resale in Russia or any country subject to an EU embargo.

Condition: good (used), I sell a set of hydraulic tools for rescue Weber- Hydraulic. - Hydraulic shears. - Arm spreader. Rjdpfxevgnr Ae Altjw - Hydraulic pump.

Condition: excellent (used), I sell a set of hydraulic tools for rescue Weber- Hydraulic. Redpfx Alsvgnhwjtow - Hydraulic shears. - Arm spreader. - Hydraulic pump.

Condition: good (used), Rolong Hydraulic Book Spine Calibration Press This machine is used to calibrate the spines of book blocks or brochures. Rjdpfxozdaxyo Altew After calibrating the spine, its thickness is equal to the thickness of the block in the groove. This process is performed after the books have been sewn. 380V power supply Manufacturer: Gantenbein, Switzerland

Condition: excellent (used), I sell a set of hydraulic tools for rescue Weber- Hydraulic. - Hydraulic shears. - Arm spreader. - Hydraulic pump. Rsdpfsvgnttex Altsw

Condition: new, functionality: fully functional, Year of construction: 2026, CONSTMACH hydraulic boom crusher, also known as a hydraulic rock crusher, is designed to deliver superior performance in demanding work environments such as quarries, mining operations, and recycling facilities. With its high impact force, it easily breaks down large-sized rocks and stones, making them suitable for the crushing line. This system allows large materials entering the crusher's bunker, especially in the initial crushing stage, to be reduced in size without direct human intervention. The hydraulic boom system, which can be controlled remotely, offers the operator maximum safety, comfort, and control. Vibration and noise levels are kept to a minimum, protecting both the operator and the equipment's lifespan. Thanks to its high-quality material structure, the CONSTMACH hydraulic boom crusher maintains its durability for many years and stands out with its easy maintenance and integration with different crushing systems. This system is an excellent solution for businesses seeking efficient, economical, and safe crushing. Hydraulic Boom Crusher Technical Specifications Crusher: CHB400 Weight: 350 kg Rjdjxqgv Dspfx Altow Equipment Diameter: 68 mm Pressure and Flow Rate: 100-150 bar / 50-80 liters Installation Area: 700 m² Boom System Specifications Working Angle: 360° Maximum Reach Area: 9000 mm Material: S355J2 Motor Power: 18.5 kW Control Type: Radio-controlled and manual valve control Filters: OMT 25 microns Hoses: (R2) Bezek Why Choose CONSTMACH Hydraulic Rock Breaker? With years of experience in the industry, CONSTMACH prioritizes quality and safety at every stage of production. Our hydraulic rock breaker systems are designed to offer maximum efficiency and minimum maintenance costs. All parts are manufactured from high-strength steel to withstand heavy-duty conditions. Furthermore, we guarantee the uninterrupted operation of your business with our spare parts and technical service support. If you are looking for a durable, reliable, and high-performance crushing solution, the CONSTMACH hydraulic boom crusher is the right choice for you. What Do We Do at Constmach? Constmach is a leading machine manufacturer offering a wide range of products tailored to the needs of the construction and mining industries. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, rock crushing machines, rock crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.

Condition: used, HYDRAULIC PRESS SMG PRESSURE 300t LENGHT OF STROKE 700mm POWER 30kw UP TABLE DIMENSIONS 1500(1600)x1300mm Rsdpfstndu Usx Altjw DOWN TABLE DIMENSIONS 1500(1600)x1300mm CUSHION 100t CUSHION LENGTH OF STROKE 280mm WEIGHT 28.000kgr FULL RECONDITION LIKE NEW CHANGE EVERYTHING (SEALS PUMPS etc)

Year of construction: 2003, condition: used, frame hydraulic press WEGOMA Workspace: width 3600 mm height 2500 mm Rsdpfxocmat Uj Altsw the amount of lateral hydraulic cylinders 3 pieces top two pieces beam mechanically Move Mechanical compression setting more photos an questions

Condition: new, Year of construction: 2026, machine/vehicle number: GP6000H2, functionality: fully functional, input voltage: 400 V, type of input current: AC, pressing force: 12 t, total length: 6,000 mm, overall weight: 2,600 kg, working width: 180 mm, working length: 6,000 mm, Equipment: chassis, documentation/manual, MASSIVE GLUING PRESS FOR GLULAM Rjdpfxou Axfcs Altjw Technical Specifications: Gluing Length: 6 m Multiple presses can be combined as needed to achieve the desired length (segments of 6 m) Pressure Bar Length: 980 mm Gluing Width: from 80 mm to 180 mm Overall Gluing Height: from 800 mm to 1300 mm (available as per inquiry) Cylinder Stroke: 150 to 300 mm Clamping Force: max 10 tons per cylinder; the appropriate force is adjusted on the pressure regulator We prepare 3D Model of the Machine for you to plan the floor space The hydraulic unit is equipped with a hydraulic accumulator and a pressure switch, which allows the hydraulic pump to operate intermittently during the pressing time. The hydraulic accumulator ensures constant pressure, even when the pump is not in operation. When the pressure drops, the pump restarts and refills the accumulator. Cycle Time: approximately 10 seconds. All surfaces that come into contact with the adhesive are protected with polished stainless steel, making it easy to clean adhesive with water. The press features two trolleys with pneumatic cylinders for the lateral alignment of the glued workpiece. Machine Weight: 2600 kg Power Supply Requirement: 5 kW, 3 x 400 VAC Options: -Customized length up to 6 meters -Customized working width -Number of trolleys for lateral alignment available upon request -Trolley with roller for adhesive application available upon request -Multiple presses can be combined as needed to achieve the desired length (segments of 6 m) last segment is as per order 2,0 - 6,0 meters -Customized Overall Gluing Height

Condition: new, functionality: fully functional, fuel type: electric, Year of construction: 2026, Spring & Hydraulic Cone Crusher: Design, Operation, and Technical Insights Cone crushers are vital in mining, metallurgy, and aggregate production, designed for secondary and tertiary crushing of hard and medium-hard materials. Among the most common types are the spring cone crusher and the hydraulic cone crusher, each offering distinct advantages in structure, performance, and control. Spring Cone Crusher The spring cone crusher is a traditional design that uses mechanical spring systems for overload protection. When uncrushable material enters the crushing chamber, the spring mechanism allows the bowl liner to move downward, preventing damage to the crusher. Once the foreign object passes, the springs restore the original position, ensuring continuous operation. Structural Composition: Main frame and base assembly Eccentric shaft and transmission system Fixed and moving cones (mantle and concave) Spring and adjustment mechanism Working Principle: Material is fed into the crushing chamber and compressed between the mantle and concave. The laminated crushing principle ensures that particles are crushed by both impact and pressure, producing uniform and well-shaped aggregates. Technical Highlights: Feed size: ≤300 mm Discharge size: 3–60 mm Capacity: 30–700 t/h Motor power: 75–400 kW Advantages: Simple structure, low maintenance cost, stable performance, and reliable overload protection. Applications: Widely used in crushing granite, basalt, iron ore, copper ore, and limestone. It is suitable for medium-scale operations where cost efficiency and durability are priorities. Hydraulic Cone Crusher The hydraulic cone crusher is an advanced evolution of the spring design, integrating hydraulic systems for improved automation, safety, and precision. It replaces the mechanical spring system with hydraulic cylinders that control the discharge opening and provide overload protection. Rjdpetxhybsfx Altsw Structural Composition: Main frame and eccentric assembly Hydraulic cylinders and control system Crushing chamber with optimized liner design Automatic lubrication and hydraulic adjustment units Working Principle: The hydraulic system adjusts the discharge opening and releases pressure automatically when uncrushable material enters. This prevents mechanical damage and allows the crusher to resume operation quickly. The combination of high-speed eccentric motion and optimized chamber geometry enhances crushing efficiency and product quality. Technical Highlights: Feed size: ≤320 mm Discharge size: 3–50 mm Capacity: 45–1200 t/h Motor power: 90–630 kW Advantages: Automatic cavity cleaning, precise control, high crushing ratio, and superior particle shape. Applications: Ideal for large-scale mining, aggregate production, and high-demand crushing lines requiring consistent output and minimal downtime. Comparative Overview Both crushers operate on the same compression principle but differ in control and automation. The spring cone crusher offers simplicity and cost-effectiveness, making it suitable for stable working conditions. The hydraulic cone crusher provides advanced control, faster adjustment, and higher efficiency, ideal for modern, large-capacity plants.

Condition: used, Edwards Pearson Hydraulic Guillotine 4m, model V.E. SHEAR 6.5/4080, Rodpfx Aszh Rfqoltew

Condition: used, Mackey Bowley Hydraulic Press 100tonnes Capacity, 400mm Stroke, Table 700 x 750mm, Ram 160mm Diameter (Approx), Ram Base Plate Diameter 700mm, Model CM507/04 Rjdpfeyabf Hjx Altew

Condition: used, Year of construction: 1998, This model of machine is fitted with 2 independent sensitive hydraulic copy units that can work from either a template or sample. The first cutter would be set for roughing out, the second one for the finishing cut that will enable a component to be produced in one pass. There is still the possibility to programme a second automatic pass of the finishing gouge for heavy work. The machine is also equipped with hydraulic tailstock unit and hydraulic operated back knives. Year - 1998 CE The unique feature of the T5E is saddle movement by precision recirculating ball screw with programmeable electronic control to the feed speed to ensure optimum turning flexibility and quality. This precision feature allows the operator to perfectly control the saddle advance in relation to the complexity of the turning and the optimized saddle speed can then be stored within the memory of the machine. 2000mm turning capacity between centres NC electronic control to saddle movement with infinitely variable feed 0 to 12m/min Two speed 4/5.5hp motor giving six spindle speeds 900-1500-1800-2250-3000-4500rpm Two Hydraulic Copy Units each mounted with horizontal vee type gouges hss 2 Vertical back slides with knives for making dowel ends Redpjzd Uv Eefx Altow Max 95mm x 95mm square section with revolving Steady Max 175mm x 175mm square section without Steady Sliding guard for operator protection CE safety equipment

Year of construction: 2021, condition: like new (used), functionality: fully functional, Specification Capacity 30 Ton Working length 1300mm Stroke length 100mm Throat depth Maximum open height without tools Fast speed of beam Bending speed Return speed 200mm 300mm Rjdpsziahdofx Altjw 100mm/s 10mm/s 90mm/s Backgauge travel 300mm Length 1500mm Width 1200mm Height 1910mm Approximate weight 2000kg Machine equipped with Cybelec CybTouch 8 control (X & Y axis) Top and bottom tooling Light guards

Condition: good (used), Year of construction: 2006, A versatile 6 section clamping machine specifically designed for solid wood edge and face laminating. The Clamp Carrier is ideal for producing a variety of components such as panels, table tops, block gluings, joinery sections and stair parts. The patented 'equaliser' clamp arms incorporate a number of important features not found on other types of mechanical clamp that help ensure a quality glue joint is produced. As standard the machine is equipped with a hydraulic clamp tightener / loosener, pneumatic component flattener and hydraulic rotation. Equipped with: 302 type clamp arms with 915mm (36") max opening and 95mm ( 3.5") high jaws - 2 x 80S heavy duty hydraulic drives for rotation Rsdjru Evgopfx Altew - 1 x 80V semi automatic hydraulic clamp tightener. (Hydraulic pack 3 phase electrics). - 1 x 80D pneumatic component flattener - Pneumatic movement in / out of front rest - CE safety perimeter guards Year - 2006 CE

Condition: excellent (used), functionality: fully functional, Cutting Length 6100mm Cutting Capacity 25mm Angle 0.5-2.5 Strokes per minute 3-5. Number of hold downs 36 Blade gap 0.005-3.00 Rsdpjygd Auefx Altjw Throat Depth 500mm

Condition: good (used), Year of construction: 1991, Electric workshop hydraulic press Capacity: 50 tons. Rjdpfx Aozhfzmjltow Table width: 800 mm, cylinder stroke: 200 mm.

Condition: used, functionality: fully functional, Year of construction: 2010, control type: CNC control, degree of automation: semi-automatic, actuation type: hydraulic, working width: 4,000 mm, sheet thickness steel (max.): 8 mm, power: 15 kW (20.39 HP), input voltage: 400 V, input frequency: 50 Hz, overall weight: 11,530 kg, Opportunity to purchase a high-quality AMADA GX II 840 hydraulic guillotine shear in very good condition. This machine is designed for accurate, reliable, and efficient cutting of sheet metal and offers excellent rigidity, high precision, and user-friendly operation. Redpfx Alezh T E Hetow The GX II series from AMADA is known for its robust construction, high safety standards, and ease of operation, making this machine ideally suited for industrial production environments. The machine is available immediately and can be inspected and tested in working order by appointment.