Used Hurco Vmx 42 for sale (156)

Condition: ready for operation (used), Number of axes: 3, connected load: 30kVA, control: Hurco Ultimax 4, weight: approx. 10.5t, equipment: chip conveyor, full enclosure cabin, electronic handwheel/control panel, coolant system, tool magazine. The machine should be overhauled, electronic components such as the mainboard and hard drive have been replaced repeatedly. An on-site inspection is possible. Podpfx Aksy Tx Nqeiorc

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Control HURCO WINMAX (Graphics, Touchscreen) Max. swing diameter 335 mm Max. turning diameter 305 mm Distance between centers 477 mm Spindle bore D52 mm Chuck size 203 mm Turret 10 stations (BMT) Spindle speed 4,800 rpm Power 11/14 kW Machine weight approx. 3,950 kg Dimensions approx. 3,000 x 2,300 x 2,000 mm Accessories - Hydraulic tailstock Predpfxo Agadks Akioc - Coolant system - Built-in tool setter - Workpiece chuck - D200 3-jaw hydraulic chuck with jaws - Parts catcher - Machine lamp - Chip conveyor The machine is in very good condition. It can be inspected under power from calendar week 46 (CW 46) in our showroom.

Condition: excellent (used), Year of construction: 2024, Traverses X Y Z: 660mm x 406mm x 508mm, table size 762mm x 356mm, Prsdpfoz Hayrjx Akisc 10000rpm spindle, 20 station ATC, DIN40 spindle taper, Hurco WINMAX 5 control, coolant, Swarf Auger

Condition: used, Year of construction: 2007, 2007 Hurco VM3 CNC Vertical Machining Centre With Hurco Max Control Table Dimensions 1,321 x 457mm (3 'T' Slots). Maximum Table Load 545kg. Axis Travel 'X'=1,270mm, 'Y'=457mm, 'Z'=457mm. Min/Max Height From Spindle Nose To Table 101-736mm. Rapid Traverse 'X'=24m/min, 'Y'=24m/min, 'Z'=19m/min. 20 Position ATC. Maximum Spindle Speed 8,000rpm (15kW Motor). Spindle Nose ISO 40. S/No. H-V30139 (2007). Psdpfe Ad Efnox Akierc With Coolant System, Auger Conveyor, Filtermist FX5002 Oil Mist Extractor, Air Gun, Wash Gun, Signal Tower, Work Lamps & 4th Axis Enabled. Overall Dimensions L2,830 x W2,770 x H2,576mm. Weight 4,245kg.

Condition: excellent (used), Year of construction: 2022, operating hours: 798 h, functionality: fully functional, machine/vehicle number: S102221332GKBCP, travel distance X-axis: 660 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 508 mm, feed rate X-axis: 28 m/min, feed rate Y-axis: 28 m/min, feed rate Z-axis: 28 m/min, torque: 74 Nm, total height: 2,564 mm, total length: 3,264 mm, total width: 2,930 mm, overall weight: 2,850 kg, spindle speed (max.): 10,000 rpm, operating hours of spindle: 98 h, spindle nose: SK 40, number of slots in tool magazine: 24, Equipment: chip conveyor, documentation/manual, HURCO VM10i A vertical machining center in compact format, in almost new condition. !!! 98 operating hours of the spindle !!! Work area Spindle nose - table (mm) 102 - 610 Table - clamping surface L x W (mm) 762 x 406 T-slots (DIN 650) 3 x 18 H8 x 100 Table load (uniformly distributed) (kg) 1500 Travel X-axis (mm) 660 Y-axis (mm) 406 Z-axis (mm) 508 Feed rate Rapid traverse X-axis / Y-axis / Z-axis 28 / 28 / 28 Main spindle Spindle taper (DIN 69871 A) SK40 Spindle speed max. (rpm) 10,000 Spindle power max. (kW) 11 Spindle torque max. (Nm) 74 Tool changer Magazine slots 24 Tool diameter max. (mm) 80 Tool length max. (mm) 250 Tool weight max. (kg) 7 Includes coolant tank (62 liters) and chip conveyor, as well as extensive accessories (machine vises, chucks, software for processing DXF files). Prsdpfoz Ei Amsx Akiec An inspection is possible at any time. The Hurco is currently still connected and can be tested.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, HURCO VM10i VERTICAL MACHINING CENTRE Year: 2015 Axis X 660 mm Axis Y 406 mm Podpfx Akozwwndeiorc Axis Z 508 mm Rotary table (4th axis) no Type of CNC Table length 762 mm Table width 406 mm Max. part weight 340 kg Number of tool pockets 20 Spindle taper Max. spindle speed 10000 rpm Spindle motor power 11 kW

Condition: excellent (used), functionality: fully functional, machine/vehicle number: BJ9-002-042, travel distance X-axis: 560 mm, travel distance Y-axis: 355 mm, travel distance Z-axis: 355 mm, controller model: Hurco Ultimax, spindle speed (max.): 6,000 rpm, Equipment: documentation/manual, TECHNICAL DETAILS X-axis travel: approx. 560 mm Y-axis travel: approx. 355 mm Z-axis travel: approx. 355 mm Table length: approx. 760 mm Table width: approx. 355 mm Spindle speed: up to 6,000 rpm Tool holder: SK40 / CAT40 Main motor power: approx. 7.5–10 HP Tool positions: 16 Rapid traverse: approx. 10 m/min MACHINE DETAILS Control system: Hurco Ultimax Machine weight: approx. 3,200 kg Predpfx Aks Afwwbsiec EQUIPMENT 16-position tool changer Various accessories

Condition: used, Year of construction: 2016, functionality: fully functional, travel distance X-axis: 660 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 508 mm, rapid traverse X-axis: 24 m/min, rapid traverse Y-axis: 24 m/min, rapid traverse Z-axis: 24 m/min, controller manufacturer: Hurco, controller model: WinMax, workpiece weight (max.): 681 kg, total height: 2,519 mm, total length: 1,800 mm, total width: 1,671 mm, table width: 406 mm, table length: 762 mm, table load: 681 kg, overall weight: 2,818 kg, spindle speed (max.): 10,000 rpm, distance table to spindle center: 101 mm, distance table center to spindle nose: 610 mm, spindle motor power: 11 W, spindle nose: ISO40, number of spindles: 1, number of slots in tool magazine: 20, tool length: 25 mm, tool diameter: 89 mm, tool weight: 7 g, Equipment: chip conveyor, documentation/manual, Used Hurco VM10i vertical machining center, ideal for companies seeking precision, reliability, and productivity with a reasonable investment. This machine is perfect for mechanical workshops, subcontractors, and manufacturers of components for automation, automotive, hydraulics, and general mechanical applications. It features a robust structure, high precision, and excellent performance in milling, drilling, and tapping operations. The machine is in good working condition and ready for immediate integration into production. Available for inspection and testing at our facility. Predpfjzcpu Iox Akisc The machine is complete with: * Auger-type chip conveyor with side discharge * High-pressure pump * Digital manuals * CE declaration of conformity

Condition: used, Hurco TM10i, 2 Axis CNC Lathe, Year 2007?, 250mm Diam 3 Jaw Chuck, Tailstock, Hydrafeed MV65 Bar Feed, Collet Chuck Unused In Box, Hurco TM10i CNC turning centre with slant bed design. Precision CNC lathe suitable for subcontract machining, production engineering and general manufacturing applications. The Hurco TM10i CNC Turning Centre is a versatile slant bed CNC lathe designed for precision machining and efficient production of turned components. Suitable for subcontract engineering, general manufacturing and production environments, the machine offers the flexibility required for a wide range of turning applications. Pjdpfx Ake Aggp Teiorc Manufactured by Hurco, a recognised supplier of CNC machine tools, the TM10i combines robust construction with reliable machining performance. The slant bed design promotes excellent rigidity and chip evacuation, helping to maintain accuracy and consistent part quality during production. Ideal for machining a variety of components and materials, the TM10i provides an excellent opportunity to acquire a quality CNC turning centre from a respected manufacturer. Its compact footprint and practical design make it suitable for both established machine shops and expanding engineering businesses. Available for inspection at our Prestwick, Ayrshire facility. Specifications: Swing: 22.9" Machining Length: 29.9" Chuck Size: 10" Bar Capacity: 3.19" Power: 29.5 hp Max RPM: 3,000 RPM Turning Dia: 17.7"

Condition: excellent (used), Year of construction: 2017, Traverses X Y Z: 1016mm x 508mm x 508mm, table size 1168mm x 508mm, 10000rpm spindle, 20 station ATC, BT40 spindle taper, input 15kW, Prjdpjzh Hw Nofx Akioc Hurco WINMAX 5 control, coolant, swarf auger.

Condition: used, Year of construction: 2020, operating hours: 13,674 h, travel distance X-axis: 810 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 640 mm, spindle speed (max.): 8,000 rpm, operating hours of spindle: 4,211 h, spindle nose: SK 50, Horizontal Machining Center Manufacturer: HURCO Model: HMX 500 Ti Year of manufacture: 2020 Control system: Ultimax Technical specifications: - X-travel: 810 mm - Y-travel: 610 mm - Z-travel: 640 mm - B-axis: 360° - Spindle speed: 8,000 rpm - Drive power: 56 kW - Tool holder: SK 50 Pedszbmzvopfx Akierc - Rapid traverse: 45/40/45 m/min - Power-on hours: approx. 13,674 h - Spindle hours: approx. 4,211 h Equipment & accessories: - Internal Coolant Supply (ICS) 40 bar - 2-station pallet changer (500 mm x 500 mm) with tombstone and zero-point clamping system (Quant) In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are included in the scope of delivery only if noted in the additional information. Subject to technical changes, errors, and prior sale.

Condition: ready for operation (used), Year of construction: 2004, operating hours: 73,420 h, controller manufacturer: HURCO, controller model: Ultimax, This 3-axis Hurco VMX 24 was manufactured in 2004, featuring a robust CNC control system, HURCO Ultimax. It offers a table size of 760 × 510 mm with a load capacity up to 850 kg. The spindle can reach speeds up to 15,000 rpm, and the machine includes a 24-position automatic tool changer. Ideal for detailed milling operations. Contact us for more information about this machine. Podpfx Aksyb Da Aoijrc

Condition: good (used), Year of construction: 2020, functionality: fully functional, turning diameter over cross slide: 402 mm, turning diameter: 295 mm, spindle speed (max.): 3,000 rpm, travel distance X-axis: 250 mm, travel distance Z-axis: 750 mm, overall weight: 5,000 kg, We offer in good condition Hurco TMM10i with the Winmax V11 software machine has following options: X-Axis travel: 250 mm Z-Axis travel: 750 mm Driven tools VDI 40 4.000 RPM Machine weight 5.000 kg Machine can be inspected under power. Predpfx Ajzpfb Njkiec Machine has following options: Renishaw tool arm Internal coolant 20 bar

Condition: ready for operation (used), Year of construction: 2019, operating hours: 1,400 h, travel distance X-axis: 520 mm, spindle speed (max.): 12,000 rpm, number of axes: 5, This 5-axis Hurco VC500i was manufactured in 2019. It features a robust control unit with WinMax software, ensuring efficient operation. The machine includes additional equipment such as a chip conveyor and a Spaleck finishing unit, enhancing productivity. If you are looking to get high-quality machining capabilities, consider the Hurco VC500i vertical machining centre we have for sale. Contact us for further details. Prjdpfx Akjz Hzbdsijc - AC Volts: 400 V- Phase: 3 Phase- Frequency: 50 Hz- Largest Motor: 9 KVA / 12 AMP- Full Load: 34 KVA / 49 AMP- Interrupt Capacity: 10000 AMPS- Short Circuit Current: 20 kA RMS Symmetrical- Max Ambient Temp: 35 DEG. C- Diagram No.: 003-4610-110- Control Unit / Software: WinMax (System Konfiguration)- Additional Equipment: Chip conveyor, Spaleck finishing unit/container, compressed air/coolant system line

Condition: used, Year of construction: 2022, Technical details: turning diameter: 336 mm turning length: 216 mm weight of the machine ca.: 8,3 t Article: CNC multi-axis lathe Psdpfezv Rgwex Akierc Manufacturer: Hurco Model: TMX 8MYSi Year of manufacture: 2022 CNC multi-axis lathe Excerpt from manufacturer’s specifications: Working area: Max. turning diameter: 336 mm Max. swing diameter: 560 mm Main spindle specifications: Max. speed: 4,500 rpm Chuck diameter: 210 mm Tie-bar diameter: 64.5 mm Counter-spindle specifications: Max. speed: 6,000 rpm Tool turret with driven tools Bar-Loading Magazine: SAMSYS M3000 (2022 model) HYDAC Cooler The machine can be visited under power. The tool configuration included in the scope of delivery may differ from the images Please, contact us for getting more information and pictures on mail(at) or *

Condition: used, Year of construction: 2016, Milling machines Travel distance X: 661 mm Travel distance Y :407 mm Travel distance Z: 508 mm Number of axis: 3 Prsdpfx Aszwnfyekijc milling machine / machining center Control: Hurco Max 5 / WinMax spindle chuck: ISO 40 / DIN 69871 spindle revolutions: 10000 rpm Speed range to: 10000 U/min table size X: 762 mm table size Y: 406 mm max. workpiece weight: 1500 kg tool changer: 20 - time input Power : 11 kW Torque: 72 Nm Rapid traverse: 28 m/min spindle cooling chip conveyor CNC vertical machining center HURCO VM10i, year 2016, equipped with HURCO MAX 5 control and WinMax software. Travels X/Y/Z: 661 x 407 x 508 mm. Table size: 762 x 406 mm, max. table load 1,500 kg. Spindle speed up to 10,000 rpm, spindle power 11 kW, torque 72 Nm, ISO 40 tool holder. 20-position automatic tool changer, rapid traverse 28 m/min, coolant system and chip auger

Condition: good (used), Year of construction: 2013, Travel ranges (working area) X-axis: 660 mm Y-axis: 406 mm Z-axis: 508 mm Spindle nose to table: approx. 102 to 610 mm Coolant system Feed rate / rapid traverse (X / Y / Z): 28 / 28 / 28 m/min Tool changer: Magazine for up to 24 tools (SK40) Psdpfx Akez Nktvsisrc Max. tool weight: 7 kg

Condition: good (used), Year of construction: 2013, functionality: fully functional, CNC control: WinMax Travel ranges: X/Y/Z: 2200 x 1700 x 750 mm Spindle speed: 12,000 rpm Tool holder: SK 40 Big Plus Drive power: 18/26 kW Tool changer: 40-station Table clamping surface: 2100 x 1600 mm Prsdez Hzbqopfx Akijc Distance from spindle nose to table: 150 – 900 mm Equipment/Accessories: Workpiece positioning detection and tool length calibration via probe Direct measuring system (X/Y/Z axes) Production package for high-performance chip removal Internal coolant supply (ICS) 20 bar Chip conveyor Coolant system (1050 liters) with belt filter unit Coolant spray gun Chip splash guard enclosure Machine status signal light LED machine light Set of machine leveling pads Parts list and circuit diagrams on CD Programming and maintenance manuals via control help function

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, travel distance X-axis: 820 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 500 mm, number of slots in tool magazine: 60, Equipment: chip conveyor, General Control: Max 5 Year of manufacture: 2023 Working Area Travel X: 820 mm Travel Y: 550 mm Travel Z: 500 mm Travel B: +110° / -110° Travel C: 360° Tool changer: 60 stations Rapid traverse X/Y/Z: 36 / 36 / 36 m/min Spindle Speed: 12,000 rpm Power: 16 kW Tool holder: SK40 NC Rotary Table Clamping surface L x W: 600 x 600 mm Spindle nose to table: 150 - 650 mm Table load capacity: 350 kg Podpfxsyap Tfs Akijrc Equipment Chip conveyor Coolant supply Direct path measuring system Through-spindle air 5-axis simultaneous capability Workpiece measurement Tool measurement High-pressure coolant (IKZ)

Condition: not inspected (used), Year of construction: 2000, travel distance X-axis: 610 mm, travel distance Y-axis: 405 mm, travel distance Z-axis: 510 mm, overall weight: 4,000 kg, spindle speed (max.): 8,000 rpm, Ultimax control system Table: 760 x 400 mm Travel: 610 x 405 x 510 mm Tool changer: 24 tools Maximum spindle speed: 8,000 rpm Prjdpfx Ajy T Ekbskijc Weight: 4,000 kg

Condition: used, Year of construction: 2013, Milling machines Travel distance X: 533 mm Travel distance Y :406 mm Travel distance Z: 483 mm HSC-machines Number of axis: 5 milling machine / machining center Control: Hurco WinMax 9 spindle chuck: BT30 spindle revolutions: 30000 rpm Speed range to: 30000 U/min tool changer: 20 - time spindle cooling chip conveyor Manufacturer: HURCO Model: VM 10 UHSi Year of manufacture: 2013 Control: HURCO WinMax 9 Number of axes: 5 X-axis travel: 533 mm Podezx T I Njpfx Akisrc Y-axis travel: 406 mm Z-axis travel: 483 mm Spindle speed: up to 30,000 rpm Spindle taper: BT30 Tool changer: 20 positions Equipment: 5-axis machining HSC (High-Speed Cutting) Tool changer Spindle cooling Chip conveyor Tool/workpiece probe Renishaw touch probe The machine is particularly suitable for precise and demanding milling operations as well as applications requiring high spindle speeds.

Condition: used, Year of construction: 2022, surface area 1321 x 610 mm max. table load 1800 kg travel -x axis 1270 mm travel -y axis 508 mm travel -z axis 508 mm spindle cone SK40 number of spindle speeds 12000 U/min spindle capacity 15 kW spindle torque max. 82 Nm rapid traverse y/x/z axis 28 m/min control HURCO MAX5 total power requirement 21 kW weight of the machine ca. 4,25 t dimensions of the machine ca. 4,1 x 3,35 x 2,6 m the machine is like new!!!, only 136 spindle hours Tool changer: - Magazine capacity: 24 positions - Max. tool diameter: 80 mm Psdpfxoza Hquj Akijrc - Max. tool length: 250 mm - Max. tool weight: 7 kg Accessories: documentation

Condition: used, Year of construction: 2023, surface area 1168 x 508 mm max. table load 1800 kg travel -x axis 1016 mm travel -y axis 508 mm Pedpoza Hqnsfx Akiorc travel -z axis 508 mm spindle taper SK40 spindle speed 10000 U/min spindle capacity 15 kW spindle torque max. 99 Nm rapid traverse y/x/z axis 28 m/min control HURCO MAX5 total power requirement 20 kW weight of the machine ca. 4,15 t dimensions of the machine ca. 3,7 x 3,3 x 2,5 m The machine is like new !!!, only 61 spindle hours Tool changer: - Magazine capacity: 24 positions - Max. tool diameter: 80 mm - Max. tool length: 360 mm - Max. tool weight: 7 kg Accessories: documentation

Condition: good (used), Year of construction: 2014, functionality: fully functional, Hurco VM 20 i, Prodpfjzc Icwex Akioc Year of manufacture: 2014, Control system: Winmax, Travel range X/Y/Z: 1016/508/400 mm, Tool changer: 24-position, Tool holder: SK 40, Spindle speed: up to 12,000 rpm, Chip conveyor, Approximately 11,000 operating hours.

Condition: ready for operation (used), Year of construction: 2016, travel distance X-axis: 661 mm, travel distance Y-axis: 407 mm, travel distance Z-axis: 508 mm, table load: 1,500 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 11,000 W, number of slots in tool magazine: 24, tool weight: 7,000 g, number of axes: 3, This 3-axis Hurco VM10i was manufactured in 2016. It features an X-axis travel of 661 mm, Y-axis travel of 407 mm, and Z-axis travel of 508 mm. The machine includes a robust table size of 762 x 406 mm and a maximum table load of 1,500 kg. If you are looking to get high-quality machining capabilities, consider the Hurco VM10i vertical machining centre we have for sale. Contact us for further details. • CNC Control: HURCO MAX 5 (WinMax software version V10.01.131.12) • Table Dimensions: 762 x 406 mm • T-Slots: 3 x 18 mm • T-Slot Center Distance: 10 mm • Spindle Nose to Table Distance: 102 - 610 mm • Spindle Torque: 72 Nm • Rapid Traverse (X/Y/Z): 28,000 mm/min • Tool Magazine Capacity: 24 positions • Maximum Tool Diameter (Adjacent Occupied): 80 mm • Maximum Tool Diameter (Adjacent Empty): 120 mm • Maximum Tool Length: 250 mm • Machine Working Hours: 15,420 h 10 min • Spindle Hours: 2,727 h 59 min • Monitor: 19" Touch Screen Pedpezgf Htjfx Akiorc • Hardware: 128 GB SSD, 4 GB RAM, Dual-Core 2.7 GHz Processor • Connectivity: 2x USB 2.0 (console), 2x USB (electrical cabinet), 1x Ethernet LAN Additional equipment • Remote electronic handwheel • Auger-type chip conveyor • Wash gun (water/air) • Status tower lamp • Retention knobs • Leveling pads Technical Specification Taper Size ISO 40