Vertical machining center

HURCO VM 20 i

Condition: ready for operation (used), Year of construction: 2014, operating hours: 10,000 h, travel distance X-axis: 1,016 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 24, number of axes: 3, This 3-axis Hurco VM20i was manufactured in 2014. It features an X-axis travel of 1,016 mm, Y-axis travel of 508 mm, and Z-axis travel of 400 mm. The machine includes a table size of 1,170 x 507 mm and a spindle speed of 12,000 rpm. If you are looking to get high-quality machining capabilities, consider the Hurco VM20i vertical machining centre we have for sale. Contact us for further details. Fgodpfx Aszc If Sjb Aog • Control: WINMAX • Clamping System: SK40 DIN69871 AD/B • Tool Holder: SK40 • Table Size: 1,170 x 507 mm • Spindle Hours: Approx. 10,000 h • Condition: Used • CE Marking: Yes • Frequency: 50 Hz • Voltage: 400 V • Power Supply: 3 Phase • Largest Motor: 13 kVA • Full Load: 20 kVA • Interrupt Capacity: 10,000 A • Short Circuit Current: 22 kA RMS Symmetrical • Maximum Ambient Temperature: 35 °C Technical Specification Through-spindle Coolant No

Condition: good (used), Year of construction: 2019, Traverses X Y Z 762 x 508 x 520mm, A axis 30/110 degrees, C axis 360 degrees, table size 250mm diameter, table load 200kgs, spindle speed 12,000 rpm, spindle taper Din 40, 40 station ATC, WinMax 5 control, through spindle coolant, swarf conveyor. Fgsdpfxozh I Ago Ab Ajg

Condition: used, Year of construction: 2023, surface area 1168 x 508 mm max. table load 1800 kg travel -x axis 1016 mm travel -y axis 508 mm travel -z axis 508 mm spindle taper SK40 spindle speed 10000 U/min Fgedpeza Hqnsfx Ab Aog spindle capacity 15 kW spindle torque max. 99 Nm rapid traverse y/x/z axis 28 m/min control HURCO MAX5 total power requirement 20 kW weight of the machine ca. 4,15 t dimensions of the machine ca. 3,7 x 3,3 x 2,5 m The machine is like new !!!, only 61 spindle hours Tool changer: - Magazine capacity: 24 positions - Max. tool diameter: 80 mm - Max. tool length: 360 mm - Max. tool weight: 7 kg Accessories: documentation

Condition: good (used), Year of construction: 2014, functionality: fully functional, Hurco VM 20 i, Year of manufacture: 2014, Control system: Winmax, Travel range X/Y/Z: 1016/508/400 mm, Tool changer: 24-position, Tool holder: SK 40, Fgsdozc Icwspfx Ab Aog Spindle speed: up to 12,000 rpm, Chip conveyor, Approximately 11,000 operating hours.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, Equipment: documentation/manual, Machine model: ALC400G Max. workpiece dimensions (W×D×H): 600 × 470 × 240 mm (Flushing) Max. workpiece dimensions (W×D×H): 600 × 470 × 230 mm (Submerged) Max. workpiece weight: 500 kg (Flushing) Max. workpiece weight: 350 kg (Submerged) Work tank dimensions (W×D): 850 × 610 mm X axis travel: 400 mm Y axis travel: 300 mm Z axis travel: 250 mm U axis travel: 150 mm V axis travel: 150 mm Taper angle (at workpiece thickness 130 mm): ±25° Wire diameter: Ø0.1 – Ø0.3 mm Wire feed speed (max): 420 mm/sec Wire tension: 3 – 23 N Machining method: Flushing / Submerged Distance from floor to table top: 995 mm Wire bobbin weight: 8 kg Machine dimensions (W×D×H): 2,115 × 2,500 × 2,230 mm Machine installation space (W×D): 3,350 × 3,850 mm Machine weight (including power supply): 3,400 kg Air pressure: 0.5 MPa Air consumption: 30 NL/min Total power input: 3-phase, 50/60 Hz, 13 kVA Dielectric tank external dimensions (W×D): 700 × 2,155 mm Dielectric tank weight (empty): 450 kg Dielectric tank capacity: 675 liters Dielectric fluid filtration method: 3 replaceable paper filters (internal Fjdpfeyu Nqmjx Ab Asgg pressure type) Deionizer: Ion-exchange resin (18 L type)

Condition: used, Year of construction: 2010, turning diameter over bed 0316 mm turning length 340 mm control ultimax Hurco Fsdpfxsydqpis Ab Ajgg turning diameter over bed slide 240 mm swing dia. 402,5 mm spindle turning speed - stepless 0- 6000 U/min- rpm spindle bore 45 mm feeds 0- 30 m/min voltage 400 V connected load 14 KW face slide travel 185 mm longitudinal travel 340 mm dimensions of the machine ca. 3,76 x 2,92 x 2,15 m taper diameter VDI 20 mm main drive motor 11,5 kW weight of the machine ca. 3,2 t Machine has 12 position turret and a bar loader.

Condition: excellent (used), Year of construction: 2007, Buderus SB735 low temperature boiler Year: 2007 Output: 1200Kw Burner: Weishaupt oil or gas burner on request Fgodponr Ek Uefx Ab Asg

Condition: excellent (used), Year of construction: 1988, functionality: fully functional, 1 used steam boiler ----- - with corrugated flame tube and dished ends - Manufacturer: STANDARD Heating surface approx.: 240 sqm Capacity: 13.4 t/h Previous operating overpressure: 14.0 bar Test overpressure: 18.2 bar Water content approx.: 18,160 l Year of manufacture: 1988 Fodpfjxtndnex Ab Ajgg Equipped with Saacke natural gas burner type DG 80, gas control line, control cabinet, feed water pump, and existing coarse and fine fittings.

Condition: used, Year of construction: 2018, Milling machines Travel distance X: 1067 mm Travel distance Y :610 mm Travel distance Z: 610 mm HSC-machines Number of axis: 3 milling machine / machining center table size X: 1270 mm table size Y: 610 mm input Power : 12 kW Torque: 237 Nm High-performance 3-axis machining center Fgjdpfxjzguh Hj Ab Aog Number of tools in the magazine: 30 SK40 tool holder Internal coolant supply Spindle cooler Hurco MAX 5 control with WinMax software

Condition: excellent (used), Year of construction: 2017, Hurco VMX30i vertical machining center Year: 2017 Technical details: X-Axis Movement 760 mm Y-Axis Movement 510 mm Z-Axis Movement 610 mm Table size 1020x510 mm Table load 1000 kg Spindle nose SK40 Spindle speed up to 12000 rpm Tool magazine 30 positions Max weight 7 kg Max tool diameter 80 mm Max tool length 300 mm Rapid traverse rate in X/Y/Z : 35/35/30 m/min Weight 4800 kgs Accessories/options: - With linear scales on all axis, with higher accuracy standard - Through spindle coolant - Chip conveyor - Cooling System - Spindle Cooling - Software options as per on the pictures Fjdpfx Ajzf Rxfob Ajgg Under power in our warehouse. Clamping units, vices, and dust extractor are not the scope of the delivery.