Used Hurco Bmc 25 for sale (155)

Condition: used, CNC Vertical Machining Center HURCO Type BMC 25/M Serial No: ZB9-001-052 Year of manufacture: approx. 1995 Travel distances X: 610 mm, Y: 410 mm, Z: 560 mm Table size (clamping surface) 845 x 400 mm Table size (with coolant groove) 1050 x 500 mm Spindle taper SK 40 Distance spindle nose - table 155 - 710 mm Table load capacity max. 500 kg Overhang 420 mm Spindle speed max. 10,000 rpm Feed rate 3 to 5080 mm/min Rapid traverse 10 m/min Spindle drive approx. 5.5 kW Power supply 400 Volt, 50 Hz - CNC path control Ultimax 3 with two TFT monitors - Electronic handwheel - Indirect measuring system with rotary encoders on the ballscrew - Tool changer with 20 tool stations - Full enclosure with sliding door - Swiveling control panel - Yaskawa (Japan) spindle drives - Pneumatic-mechanical tool clamp - Without coolant system – pump included – coolant tray missing Machine width 2400 mm Space requirement for transport L x W x H = 3000 x 2400 x 2650 mm Cjdpfx Afsw Nklhonsgn Weight 4200 kg Good condition

Condition: ready for operation (used), Year of construction: 2000, operating hours: 5,374 h, travel distance X-axis: 610 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 540 mm, spindle speed (max.): 8,000 rpm, number of axes: 3, This 3-axis Hurco BMC 2416 vertical machining center was manufactured in 2000. It features a robust Ultimax control system, a spindle speed of up to 8000 rpm, and rapid traverse rates reaching 24003 mm/min. With a tool magazine of 24 positions and generous travels in X, Y, and Z dimensions (610, 406, 540 mm respectively), consider the opportunity to buy this Hurco BMC 2416 vertical machining center. Contact us for more information about this machine. Machine Benefits Technical Machine Benefits • Max rapid traverse: 24003 mm/min • Max contour feed: 7620 mm/min • Tool positions: 24 Cgodpfxox D Nz Ns Afnjn Extra Information Machine still under power

Condition: ready for operation (used), Year of construction: 2000, operating hours: 25,000 h, Machining center Huroc BMC 64 No IKZ chip conveyor coolant trough spindle mount SK 40 DIN 69871 Cgsdpep I Hanefx Afnen

Condition: ready for operation (used), Year of construction: 1997, Main Drive Spindle speed range 80 to 8000 Spindle motor power 5.5 kW Number of axis 3 Movement X-Axis Movement 760 mm Y-Axis Movement 460 mm Z-Axis Movement 610 mm Additional Equipment Lehman 4/5-axis dividing machine, diameter 200 mm Fully protective cabin with sliding door This 5-axis Hurco BMC 30HT/M was manufactured in 1997, featuring a Lehman 4/5-axis dividing head with a 200 mm diameter. It includes a CNC Ultimax 3 control, a tool changer with 24 positions, and a spindle speed up to 8000 rpm. The machine offers X/Y/Z travel paths of 760/460/610 mm and a rapid traverse of 24 m/min. Consider the opportunity to buy this Hurco BMC 30HT/M vertical machining center. Contact us for more information about this machine. Cgsdpfx Ajx D D Rlsfnjn Application Types Milling

Condition: used, CNC Vertical Machining Center HURCO Type BMC 30/M Serial No: B3M92202056AB : 9650234 Year of construction 1996 CNC path control Ultimax 3 Travel X: 760 mm, Y: 460 mm, Z: 610 mm Cgjdpfx Aetrhq Hefnjn Table size (clamping surface) 1010 x 400 mm Table size (with water groove) 1120 x 500 mm Spindle holder SK 40 Distance spindle nose - table 150 - 760 mm Projection 450 mm Spindle speed 80 to 8000 rpm infinitely variable Feed rate 3 to 16,000 mm/min. Rapid traverse 24 m/min. Spindle drive 7.5 kW at 30 min / 5.5 kW at 100% Mains connection 400 Volt, 50 Hz - CNC path control Ultimax 3 (with hardware update e.g. TFT monitors) - Electronic handwheel - Indirect measuring system with rotary encoders on the ball screw spindle - Tool changer with 24 tool positions - Fully protected cabin with sliding door - Rotating control panel - spindle drives Yaskawa (Japan) - pneum. mechanical tool clamp - Coolant unit adjacent, pushed under from behind - trough rinsing Machine width 2400 mm Space required for transportation L x W x H 3400 x 2400 x 2550 mm Weight approx. 4800 kg good condition

Condition: excellent (used), Year of construction: 1997, Ultimax 3-4 control system with two color screens (text and graphics) Travel X/Y/Z: 1020/510/610 mm Codpfx Aewzy N Ijfnogn Speed: 8000 rpm Tool magazine for 24 tools, SK 40 DCF software

Condition: used, Year of construction: 1999, x-travel 610 mm y-travel 405 mm z-travel 510 mm table surface area 760 x 400 mm spindle taper SK 40 spindle turning speed - stepless 80 - 8000 U/min spindle drive 7,5 kW max. torque on the spindle max. 142 Nm feeds 3,0 - 7600 mm/min rapid motion -longitudinal/cross/vertical 24 / 24 / 15 m/min distance table / vertical spindle max. 600 mm table load 350 kg Cgedpfx Ajvh Nbusfnsn no. of tools in magazin 24 workpiece diameter at full load 80 mm tool length - max. 300 mm weight of tools max. 6,8 kg control ULTIMAX SSM total power requirement 18 kVA weight of the machine ca. 4,1 t Accessories: 2 tool fixtures SK 40, 3-jaw chuck RÖHM, chip conveyor, coolant

Condition: used, Year of construction: 1998, functionality: fully functional, machine/vehicle number: B3M92212078CC, CNC Vertical Machining Center HURCO Type BMC 30/M Year of manufacture: 1998 CNC path control Ultimax 3 X: 760 mm, Y: 460 mm, Z: 610 mm Table: 1010 x 400 mm Spindle mount: SK 40 Distance spindle nose - table: 150 - 760 mm Overhang: 450 mm Spindle speed: 80 to 8000 rpm, stepless Rapid traverse: 24 m/min Cgsdpfjw Tdiuox Afnon Spindle drive: 7.5 kW at 30min / 5.5 kW at 100% Electrical connection: 400 Volt, 50 Hz - CNC path control Ultimax 3 (with hardware update, e.g. TFT monitors) - Electronic handwheel - Indirect measuring system with rotary encoders on the ball screw - Tool changer with 24 tool positions - Full enclosure / sliding door - Swivel operating panel - Pneumatic/mechanical tool clamping Dimensions (L x W x H): 3400 x 2400 x 2550 mm Weight: approx. 4,800 kg Good condition

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, travel distance X-axis: 1,020 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 610 mm, nominal power (apparent): 25 kVA, controller model: Ultimax 4, table width: 1,220 mm, table length: 510 mm, spindle speed (min.): 80 rpm, spindle speed (max.): 8,000 rpm, number of slots in tool magazine: 24, mount diameter: 40 mm, Equipment: rotational speed infinitely variable, Hurco BMC 4020 CNC Milling Machine Cjdpfx Afswa T Injnjgn Ultimax 4 Control Travel X 1,020 mm, Y 510 mm, Z 610 mm Clamping Area 1,220 x 510 mm Tool Positions 24 x SK40 Spindle Speed 80-8,000 rpm Coolant System Please contact us if you are interested.

Condition: ready for operation (used), functionality: limited functionality, To be sold as a package: HURCO BMC 30 Machine number: BK-9-002-020 Year of manufacture: 1990 Csdpfx Afjt Takaonsgn HURCO BMC 45M Machine number: 92001097BB Year of manufacture: 1997 The machines can be inspected but cannot be operated. Delivery terms: ex works Location: 36110 Schlitz-Bernshausen Delivery time: immediately Price: negotiable

Condition: used, Price: On request CNC Cjdpfxjwnhrwo Afnsgn Digital type: UNIMAX Number of axes: 3 Travel x: 1020mm Travel y: 510mm Travel z: 610mm Min. Spindle speed: 80rpm Max. Spindle speed: 8000rpm Table: 1220x510mm Motor power: 15kw - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Drive system: CNC - Power [kW]: 15.0 - Number of axes [pcs]: 3 - X-axis travel [mm]: 1020 - Y-axis travel [mm]: 510 - Z-axis travel [mm]: 610 - Table length [mm]: 1220 - Table width [mm]: 510 - Min. spindle speed [rpm]: 80 - Max. spindle speed [rpm]: 8000 - Options: Digital readout - └ Type of digital readout: UNIMAX Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: new, Year of construction: 2025, functionality: fully functional, travel distance X-axis: 3,200 mm, travel distance Y-axis: 2,100 mm, travel distance Z-axis: 900 mm, Travel distances: X-axis (longitudinal) 3200 mm Y-axis (transverse) 2100 mm Z-axis (vertical) 900 mm Working area: Table clamping surface 3000 x 1700 mm Spindle nose to table 66 – 966 mm Table load capacity 11000 kg 5-axis fork head: Tool holder HSK 63 A C-axis (4th axis) +/- 360° B-axis (5th axis) +100° / -110° Main drive: Drive type Motor spindle Drive power 63 kW Spindle speed: Spindle speed 18000 rpm Torque 106 Nm Max. rapid traverse: X and Y axes 15000 mm/min Machine weight: 37700 kg Accessories: Csdpex H Srlofx Afnsgn HURCO CNC Machining Center DCX 32-5 Si (ATC 60) with MAX5 control - AXS control with detachable electronic handwheel - Pentium technology, SSD (Solid-State Drive), 2 GB RAM, Ethernet interface, USB interface, built-in self-diagnosis system, WINDOWS platform - Rigid tapping (tapping without compensation chuck) - 60-position tool changer - 5-axis fork head - Motor spindle - Spindle cooler - Chip conveyor 5-axis simultaneous machining, enabling simultaneous movement of 4 or 5 axes in NC operation.

Condition: not inspected (used), Year of construction: 1999, feed length X-axis: 760 mm, feed length Y-axis: 430 mm, feed length Z-axis: 500 mm, Ultimax 3 with 4th axis BT 40 spindle 8000 rpm spindle speed Cjdpfx Asvgbrvefnogn 760x430x500mm stroke 24-tool changer 860x508mm table

Condition: not inspected (used), Year of construction: 2004, functionality: unexamined, travel distance X-axis: 1,060 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, controller model: Ultimax 4, rotational speed (max.): 10,000 rpm, TECHNICAL DETAILS Travel X-axis: 1,060 mm Travel Y-axis: 610 mm Travel Z-axis: 610 mm Rapid traverse X/Y/Z: 30 m/min Distance table surface to spindle nose: 150 - 760 mm Speed range: 10,000 rpm Spindle motor: 15 kW Tool holder: SK 40 Tool changer: 24 positions Table size: 1,300 x 630 mm Max. table load: 1,100 kg MACHINE DETAILS Control: Ultimax 4 Connected load: 24 kW Cgsdpfeyfpi Dsx Afnsn Dimensions & weight Required space (LxWxH): 4.9 x 3.8 x 2.75 m Machine weight: 6,500 kg EQUIPMENT Chip conveyor

Year of construction: 2012, condition: excellent (used), Type of CNC HURCO ULTIMAX Turning length 483 mm Turning Ø 256 mm Ø above the bed 548.6 mm Ø above transversing slide 320 mm Length between centers 584.2 mm X-axis 203.2 mm Z-axis 508 mm Max workpiece weight kg Spindle bore 61 mm Number of turrets 1 Number of tools on turret 10 Number of rotating tools 10 Turning speed 4800 rpm Spindle motor power 11.2 kW Codpfopiay Sox Afnogn Tailstock

Condition: used, Hurco Hawk Model 5D, with Dynapath Delta CNC control, 70-3800 RPM, 1000mm x 330mm table. Bt 40 Spindle. Immaculate condition from University. Cgjdpfsya Hrrex Afnjn

Condition: ready for operation (used), Year of construction: 2008, travel distance X-axis: 610 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 610 mm, total height: 2,600 mm, overall weight: 4,300 kg, spindle speed (max.): 12,000 rpm, number of axes: 5, This 5-axis Hurco VMX 24t was manufactured in 2008, featuring a Winmax Version 9 control system, a robust table size of 762 x 510 mm, and a high-speed spindle at 12000 rpm. It supports a maximum table load of 1350 kg and offers extensive X, Y, and Z travels of 610 mm each. Accessories include a coolant system with IKZ, spindle cooler, and a large chip conveyor. Contact us for more information about this machine. Additional equipment • Coolant system with IKZ (20 bar) • Spindle cooler • Large chip conveyor Machine Benefits Technical Machine Benefits • Winmax version 9 control system • Table dimensions: 762 x 510 mm • Mounting: sk40 Extra Information Cjdex Nkpzopfx Afnsgn Machine still under power Dimensions Machine Depth 2300 mm

Condition: used, Year of construction: 2022, x-travel 1350 mm Csdpfxoxfwg Ne Afnjgn y-travel 950 mm z-travel 600 mm Control MAX 5 total power requirement 35 kW weight of the machine ca. 14 t dimensions of the machine ca. 3100x4535x3495 m

Condition: ready for operation (used), Year of construction: 2008, travel distance X-axis: 1,524 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 610 mm, spindle speed (max.): 10,000 rpm, number of axes: 3, This 3-axis Hurco VMX 60 was manufactured in 2008. A vertical machining center featuring a MAX Control system, it offers X-axis travel of 1,524 mm, Y-axis travel of 660 mm, and Z-axis travel of 610 mm. It includes a spindle speed of 10,000 rpm, a BT40 spindle taper, and a 24-position tool turret. Consider the opportunity to buy this Hurco VMX 60 vertical machining center. Contact us for more information about this machine. • Table size: 1,670 x 660 mm Cgjdpfxeygmtvo Afnjn • Tool turret: 24 positions Additional equipment • Various tools • Chip evacuator Technical Specification Taper Size BT 40

Condition: used, Year of construction: 2010, turning diameter over bed 316 mm turning length 340 mm Cjdpfxoydqpis Afnogn control ultimax Hurco turning diameter over bed slide 240 mm swing dia. 402,5 mm spindle turning speed - stepless 0- 6000 U/min- rpm spindle bore 45 mm feeds 0- 30 m/min voltage 400 V connected load 14 KW face slide travel 185 mm longitudinal travel 340 mm dimensions of the machine ca. 3,76 x 2,92 x 2,15 m taper diameter VDI 20 mm main drive motor 11,5 kW weight of the machine ca. 3,2 t Machine has 12 position turret and a bar loader.

Condition: used, Hurco VM30 Vertical Machining Centre. New 2012 Machine ready with transit clamps in position. Specifications: X: 50" Y: 20" Cgsdpfxox Rkyvj Afnen Z: 20" Power: 20 hp RPM: 10,000 RPM # ATC: 20 Table-W: 52" Table-L: 18"

Condition: good (used), Year of construction: 2001, functionality: fully functional, Hurco VMX50i – CNC Machining Center in Excellent Condition For sale is a Hurco VMX50i, a powerful vertical CNC machining center, ideal for demanding mold making, mechanical engineering, and single-part to small-batch production. Technical Specifications: - Model: Hurco VMX50i - Year of manufacture: 2001 - Control: Hurco Ultimax - Travel axes (X/Y/Z): 1270 / 660 / 610 mm - Spindle: 10,000 rpm, SK40, with spindle cooling - Tool changer: 24 positions - Table size: 1,320 x 610 mm - Max. table load: 1,500 kg - Connected load: approx. 20 kVA Equipment: - Spindle cooling - High-pressure coolant system - Chip conveyor - USB/network interfaces - 3D visualization - Conversational and NC programming - Includes hand wheel and documentation Csdpfx Aeyhap Tofnegn Condition: The machine is in good condition and is currently no longer in production. An inspection under power can be arranged by appointment. Location: Velbert

Condition: ready for operation (used), Year of construction: 2007, operating hours: 13,620 h, controller manufacturer: HURCO, controller model: Ultimax, spindle speed (max.): 12,000 rpm, spindle motor power: 18,000 W, number of axes: 3, This 3-axis Hurco VMX 42 was manufactured in 2007. It features a Hurco Ultimax CNC control, a spindle speed of 12,000 rpm, and an ISO40 / BIG-PLUS spindle interface. The automatic tool changer and SK40 tool holder enhance its efficiency. Additionally, it includes a scraper-type chip conveyor. Consider the opportunity to buy this Hurco VMX 42 vertical machining center. Contact us for more information. • Spindle interface: ISO40 / BIG-PLUSTool system • Automatic tool changer • Tool holder: SK40 (DIN 69871) • Pull stud: DIN standard Additional equipment Cedpfx Asyc S N Iofnsgn • Scraper-type chip conveyor • Discharge height: approx. 1,000 mm Technical Specification Taper Size ISO 40

Condition: new, Year of construction: 2024, functionality: fully functional, travel distance X-axis: 1,270 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 508 mm, rapid traverse X-axis: 24 m/min, rapid traverse Y-axis: 24 m/min, rapid traverse Z-axis: 24 m/min, nominal power (apparent): 22 kVA, torque: 11 Nm, controller manufacturer: Milltronics, controller model: CNC 9000, total height: 2,565 mm, total length: 3,722 mm, total width: 3,210 mm, table width: 508 mm, table length: 1,168 mm, table load: 1,710 kg, overall weight: 4,300 kg, spindle speed (max.): 10,000 rpm, distance table center to spindle nose: 610 mm, spindle motor power: 7,500 W, number of spindles: 1, number of slots in tool magazine: 20, tool length: 240 mm, tool diameter: 80 mm, tool weight: 7,000 g, input voltage: 230 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, => Price of the machine within Germany. => Machine available ex stock. Transport from warehouse in the Netherlands or Italy to be arranged by the buyer. Further machine sizes available. => Installation and commissioning available upon request. Including auger chip conveyor and all software options such as: • Milltronics 9000-DGI CNC incl. all options for desktop, programming, milling strategies • 15" color LCD touchscreen monitor • 120 GB solid state drive • 4 GB RAM • Two USB ports • Productivity software ChipBoss, DSA, MSV, 9000-DGI Desktop Optional accessories: IKZ – Through-spindle coolant 20 bar, with rotary union and auxiliary tank with filter Cjdpfx Aexwyzysfnogn Programmable air cooling via spindle IKZ pre-installation for Milltronics IKZ system allows easy on-site installation of the Milltronics IKZ system IKZ pre-installation for ChipBlaster® IKZ system allows easy on-site installation of the ChipBlaster® IKZ system Programmable minimum quantity lubrication Programmable air cooling LCM 4th axis Model TDE-MV-200 complete with controller and motors LCM 4th axis Model TDE-MV-250 complete with controller and motors 5AX LCM-BSC-200 complete with controller, motors, and cables 4th axis electrical package with 1kW servo controller Milltronics M-170 (170mm) rotary table with servomotor and cable (requires 4th axis electrical package) Milltronics M-200 (200mm) rotary table with servomotor and cable (requires 4th axis electrical package) Milltronics M-250 (250mm) rotary table with servomotor and cable (requires 4th axis electrical package) Milltronics TS-A135 tailstock for M-170 rotary table Milltronics TS-A160 tailstock for M-200 rotary table Milltronics TS-B185 tailstock for M-250 rotary table 180 mm three-jaw chuck with adapter flange (only for Milltronics M-170 and M-200 rotary tables) 230 mm three-jaw chuck with adapter flange (only for Milltronics M-250 rotary table) Tsudakoma 4th axis Model RNE-160R with motor (4th axis electrical package must also be ordered) Tailstock for Tsudakoma RNE-160R Tsudakoma 4th axis Model RNE-200R with motor (4th axis electrical package must also be ordered) Tailstock for Tsudakoma RNE-200R Renishaw OMI-2T interface included OMP40-2 workpiece probe with optical signal transmission and macros OTS tool setting probe with optical signal transmission and macros Renishaw OMI-2T interface included OMP40-2 workpiece probe with optical signal transmission and macros Renishaw OMI-2T included OTS tool setting probe with optical signal transmission and macros Renishaw NC4-F300 non-contact tool measurement DIN / CAT tool holders Hinged belt chip conveyor External keyboard uses 1 USB port Electronic spindle cooler Additional work light Additional "M" functions block with 4 units Programming manual in paper format Machine manual in paper format

Condition: ready for operation (used), Year of construction: 2021, This 3-axis Hurco VM 10i was manufactured in 2021, featuring advanced capabilities like MAX5 control with dual 19" LCD displays, Ethernet and USB interfaces, and a solid-state drive for enhanced performance. It includes high-pressure coolant systems through the spindle, integrated hydraulic tool clamping, and a chip auger for efficient chip management. Consider the opportunity to buy this Hurco VM 10i vertical machining centre. Contact us for more information about this machine. • Includes MAX5 control with detachable electronic handwheel • 2 × 19" LCD color displays (text + graphics) • Network interface • 2 software units for programming • Internal self-diagnostics Cgodsx H A I Repfx Afnjn • Windows platform • Integrated hydraulic tool clamping system • Cooling flood through spindle with ICS (20 bar) • High-pressure cooling flood system • Spindle cooler • Chip auger • Chip splash guard cabin • LED machine light in the work area • Indicator light for machine operating status • Trochoid milling cutter function for higher machining performance • Tool and workpiece measurement • Collision protection with islands • Synchronous thread cutting • ISNC extended NC mode