Used Eisele Vms Ii for sale (110)

Condition: excellent (used), Year of construction: 1987, functionality: fully functional, Cold Circular Saw Eisele VMS-II-S, Year 1987, Very Good Condition from University >> Manufacturer: EISELE, Model VMS II S >> Vertical cold circular saw >> 2 speeds: 17/34 rpm Iodsxx T Nmopfx Ag Dea >> Year of manufacture: 1987 >> Working range: Ø 80-102 mm / Flat 160x75/82 mm >> Drive power: 1.4/1.9 kW >> Saw blade diameter possible: 275 - 315 mm >> Space requirements approx. 80 x 90 x 180 cm >> Weight approx. 400 kg >> Manual lowering of the saw carriage with adjustable hand lever >> Manual, laterally adjustable material vice >> Coolant system with electric coolant pump integrated in machine base About the machine: A well-maintained Eisele VMS-II cold circular saw is being offered. The machine is in original condition and fully functional. It comes from a university and has seen little use. You are welcome to test and inspect the saw under power at our facility.

Condition: used, Max. saw blade diameter: 350 mm Manual saw feed 2 sawing speeds Ijdpfx Ajxn Ivgog Dja Coolant lubrication

Condition: excellent (used), Year of construction: 1966, I sell a circular saw made in Germany. Company Eisele model vms II in good condition Iedpfx Aovbwfneg Dea

Condition: used, Mitre Cold Circular Saw EISELE Type VMS-II-S Model No. 421 Serial No. V 2295 Year of manufacture: 1984 Cutting capacity at 90° (round): Ø 120 mm Cutting capacity at 90° (rectangular): 120 x 90 mm Saw blade diameter max.: 350 mm Blade speed: 40 - 80 rpm, 2-step Mitre cuts: 45° to the left, 90°, and continuously adjustable up to 30° (60°) to the right Motor power: 1.4 and 1.9 kW Power supply: 380 Volt, 50 Hz - Two cutting speed stages via two motor speeds - Manual saw carriage lowering via adjustable lever - Manual material vice, side-adjustable - Coolant system with electric coolant pump integrated in machine base - Equipped with one saw blade, approx. Ø 350 mm - Outfeed roller conveyor 750 mm with simple length stop up to 1000 mm, fixed to the machine base - Infeed roller conveyor 2350 mm with simple length stop up to 2500 mm, free-standing - Usable roller width: 180 mm Space requirement of base machine with outfeed roller conveyor (L x W x H): 1400 x 850 x 1700 mm Iodpfjxk Uunex Ag Doa Base machine weight: approx. 450 kg Infeed roller conveyor weight: approx. 140 kg Good condition

Condition: good (used), Year of construction: 1972, functionality: fully functional, machine/vehicle number: 27252, saw blade diameter: 275 mm, cutting height (max.): 140 mm, cutting range round steel at 90°: 80 mm, total length: 680 mm, total height: 1,750 mm, total width: 680 mm, overall weight: 270 kg, type of input current: three-phase, rotational speed (min.): 10 rpm, rotational speed (max.): 80 rpm, space requirement length: 2,120 mm, input voltage: 380 V, length stop: 1,000 mm, working height: 950 mm, saw drive: 1,400 W, Equipment: documentation/manual, The machine has been in operation since it was purchased new in 1972, works perfectly, and will remain in use until sold. INCL. 6 SAW BLADES 275 x 2.5 x 2.5 x 40, freshly reground 2021: Coolant pump switch replaced 2020: Overhaul at Bider Hauser AG Iodpfxsv Uk Iio Ag Dja - Drive motor replacement - New saw blade flange - New gear oil Base area 680 x 680 mm Length stop right 1000 mm (1310 mm from saw blade) Workpiece support left 800 mm from saw blade Speeds: 10/20/40/80 rpm Cutting ranges: Hollow flat profiles / angle iron: - Straight --> 140 x 70 mm - Mitered --> 100 x 70 mm Pipes --> 3" diameter Solid material --> 80 mm diameter Square material --> 50 x 50 mm

Condition: good (used), Year of construction: 1985, Eisele VMS-II-S-PV metal circular saw Type No. 421 Iedpfx Aged Hbnfs Dsa Maschnr. 01224 380V Built in 1985 50 Hz

Condition: not inspected (used), Eisele VMS II-S-PV automatic saw with automatic feeder and piece counter Roller conveyors left and right Iodpfx Agjwf Af Ts Dja Metal band saw, metal circular saw

Condition: good (used), Year of construction: 1986, functionality: fully functional, machine/vehicle number: 0783, Miter cold circular saw EISELE Isdpfx Aet A Ar Ssg Doa Type VMS-III-S-PV Type No. 430 Machine. No. 0783 Year of construction 1986 Sawing range at 90°: (round) Ø 120 mm Sawing range at 90°: (flat) 150 x 110 mm Sawing range at 45°: (round) Ø 100 mm Sawing range at 45°: (flat) 120 x 100 mm Saw blade diameter: 350 mm Saw blade speed: 17 + 34 rpm Mitre cut 45° to the left, 90° and up to 30°(60°) to the right infinitely variable Motor power: 2 and 2.6 kW Mains connection: 380 Volt, 50 Hz Features: - Semi-automatic vertical cold circular saw - Pneumatic material quick clamping device - Infinitely adjustable pneumatic saw blade feed - Convenient miter adjustment with fixed stops - Saw carriage on very stable rectangular guide - Comfortable and stepless stroke adjustment of the saw unit via clamping lever - Generously dimensioned gearbox - with Eisele rotation compensation for long saw blade service life - Simple saw blade change - High productivity with minimum space requirement (less than 1 m²) - Coolant system in the machine base Space requirement: 1100 x 710 x 1900 mm (L x W x H) Weight 460 kg The machine can be tested / demonstrated under power on site. All information without guarantee. Subject to prior sale. The object of purchase is sold under exclusion of any warranty. The exclusion does not apply to claims for damages arising from grossly negligent or intentional breach of obligations by the seller or for any injury to life, limb or health.

Condition: ready for operation (used), Year of construction: 1989, Saw blade Ø: 350 mm Cutting capacity: at 90° & 45°, round: 120 mm at 90°, flat: 170 x 100 mm at 45°, flat: 120 x 100 mm at 90°, square: 100 mm at 45°, square: 95 mm 2 saw blade speeds: 17/34 rpm Drive motor: 400 V, 2/2.6 kW Weight: 425 kg Required space: 900 x 800 x 1800 mm Iedpfx Asxln Ukjg Dsa

Condition: used, Year of construction: 1985, dimensions of saw-blade Ø 320-350 x 3.0 mm cutting range 120 mm capacity 90 degrees: square 90 x 90 mm capacity 90 degrees: flat 200 x 90 mm capacity 45 degrees: flat 140 x 90 mm work height max. 925 mm saw blade turning speeds 17 / 34 U/min compressed air 6.0 - 8.0 bar engine output 1400 / 2800 U/min. total power requirement 2.0 / 2.6 kW weight 470 kg range L-W-H 850 x 900 x 1800 mm Machine from a vocational school (NL) maintained condition (!!) Furnishing : - semi-automatic vertical cold circular saw - pneumatic material quick-clamping device - Infinitely adjustable saw blade feed - Convenient miter adjustment with fixed stops - Convenient stroke adjustment of the saw unit using a clamping lever - Generously sized gearboxes Iodpjxacbnjfx Ag Dsa - with Eisele rotation compensation for long saw blade service life - Convenient saw blade change - High productivity with minimal space requirements (less than 1 m²) - Coolant device * Machine link: ?machineno=1008-9164094

Condition: good (used), Year of construction: 1980, functionality: fully functional, Type VMS III - PV Machine No. 8518 Year of construction 1980 Isdpfjxmuzaox Ag Dja Technical data : 2-stage saw motor 2.0 / 2.6 kW Saw blade 350 mm 4 cutting speeds 8.5 / 17 / 34 / 68 rpm Clamping range, flat / round 200 / 120 mm Feed length, single stroke 5 - 600 mm Feed length, double stroke 1200 mm

Condition: used, Year of construction: 1975, saw blade diameter 350 mm Isdpfxew Nrvbj Ag Dea capacity 90 degrees: round 120 mm capacity 45 degrees: round 100 mm capacity 90 degrees: flat 150 x 110 mm capacity 45 degrees: flat 120 x 100 mm engine output 1,8 / 2,6 kW 500 mm weight 450 kg dimensions ca. 1100x710x1850 m Semi-automatic vertical cold circular saw with pneumatic clamping and feed device 4 saw blade speeds (2 via motor / 2via gearbox: 11/22/44/88 rpm integrated coolant pump

Condition: used, Year of construction: 1989, saw blade diameter 320 mm cutting diameter 140 mm total power requirement 3 kW weight of the machine ca. 0,5 t Iodpfxjw Dvivo Ag Dea

Condition: good (used), Year of construction: 1985, Eisele VMS III S.PV cold circular saw Manual saw blade feed Isdpjiyzccefx Ag Dja Vice Max. saw blade diameter: 350mm Miter cuts of 90-30 degrees Cutting performance (straight cuts):Flat profiles: 200 x 90 mm Pipes: 120mm diameter Square tubes: 90mm Solid material: 100mm Cutting performance (miter):◾Flat profiles: 140 x 90mm Pipes: 120mm diameter Square tubes: 90mm Solid material: 100mm Speeds: 34/68 rpm

Condition: used, Year of construction: 1991, saw blade diameter 275 mm Ijdpfxsvg R Rno Ag Doa cutting diameter 90 mm stroke 250 mm turning speeds 40 / 80 U/min capacity 90 degrees: square 75 mm total power requirement 1,0 / 1,4 kW weight of the machine ca. 250 kg dimensions of the machine ca. 600 x 700 x 1600 mm Features: - Coolant system - One-sided miter adjustment - Saw blade 275 x 2.5 x 40 mm - Machine base

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, Behringer Eisele VMS 400 A metal circular saw for processing almost all steel qualities. Integrated coolant unit and micro-spraying system, selectable in the control system as required Hydraulic saw feed and quick clamping vice with clamping pressure reduction NC control with graphic display and keypad 3 selectable operating modes (manual mode, series and single cuts) Convenient stroke adjustment of the saw unit via clamping lever Can be combined with infeed and outfeed roller conveyors Manufacturer: Behringer Eisele Type: VMS 400 A metal circular saw Year: 2013 Condition: used, very good Flat 90 ° [mm] 200 x 120 Flat 45 ° [mm] 140 x 120 Flat 30 ° [mm] 100 x 100 Square 90 ° [mm] 120 Ijdpexwmckofx Ag Dja Square 45 ° [mm] 120 Square 30 ° [mm] 100 Round 90 ° [mm] 140 Round 45 ° [mm] 140 Round 30 ° [mm] 110 Feed length 800 mm Drive power 2.0 / 2.6 kW Speeds 8 / 16 / 32 / 64 min-1 Saw blade diameter 400 mm Saw blade feed hydraulic Material feed ball screw Hydraulic clamping device Minimum quantity lubrication Chip clearing brush Length 3,100 mm Width 1,500 mm Height 2,000 mm Weight 1,350 kg Material support height 920 mm Scope of delivery: Documentation 4x saw blades 1x feed roller conveyor 2m

Condition: used, Year of construction: 1977, miter ja Iedpfx Asvxlthsg Doa clamping ja kW mechanical Senkung weight of the machine ca. 500 kg

Condition: used, Year of construction: 2002, functionality: fully functional, machine/vehicle number: 43101P0016 / 0 6776, saw blade diameter: 400 mm, cutting height (max.): 145 mm, feed length X-axis: 2,000 mm, cutting range round steel at 45°: 145 mm, cutting range round steel at 90°: 145 mm, total length: 9,000 mm, total height: 2,200 mm, total width: 1,200 mm, cutting speed: 35 mm/min, overall weight: 750 kg, type of input current: three-phase, saw blade speed: 140 rpm, Equipment: rotational speed infinitely variable, High-performance metal circular saw Semi-automatic with PLC control Feed: hydropneumatic Clamping device: pneumatic This saw was predominantly used for cutting thin-walled tubes. Saw blade lubrication provided by a minimum quantity lubrication system. No information on operating hours. The saw, the feed roller conveyor (6 m) and the stop roller conveyor (1.5 m) have been dismantled and are ready for shipping. Iedpfxoxxm Szo Ag Doa The saw can be connected individually to power and air supply for demonstration purposes. 10 saw blades Ø 350–400 mm are included in the scope of delivery.

Condition: excellent (used), functionality: fully functional, Largest, fully hydraulic EISELE: weight approx. 0.75 t, saw blade 440 mm Speeds: 12.5 / 25 rpm Motor power: 2.6 / 3.2 kW Iedpfsxxbn Dox Ag Doa Hydraulic saw feed Hydraulic vise Cutting ranges: 200 x 100 mm (square tube) Mitre cut one-sided 45°.

Condition: excellent (used), Year of construction: 2007, Saw blade diameter: 370 mm Cutting capacity flat at 90/45/30°: 200 x 100 / 140 x 100 / 100 x 100 mm Cutting capacity square at 90/45/30°: 120 / 100 / 90 mm Cutting capacity round at 90 & 45 / at 30°: 130 / 105 mm Iodsxlgz Nepfx Ag Doa 2 saw blade speeds Drive motor: 2 / 2.6 kW Weight: 430 kg Space required: 800 x 700 x 1770 mm

Condition: good (used), Year of construction: 2002, Metal Circular Saw Behringer Eisele VMS 300 PV Manufacturer: Behringer Eisele Type: VMS 300 PV Year of construction: 2002 Condition: used Cutting range: Straight cut: 120 x 75mm Iedsxwl Urspfx Ag Dsa 45° miter cut: 80 x 75mm Speed: 40/80 rpm Weight. 200kg - semi-automatic version - pneumatic quick clamping devices - Infinitely adjustable hydropneumatic saw blade feed - stroke adjustment of the saw unit via clamping lever - generously dimensioned gears with EISELE rotation compensation - Convenient saw blade change Scope of delivery - Operating instructions - 1x saw blade (mounted)

Condition: used, Year of construction: 1979, cutting diameter 440 mm weight of the machine ca. 780 kg +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Iedpfx Agjf Dwa Uo Doa Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Behringer Eisele VMS 370 PV Metal Circular Saw Manufacturer: Behringer Eisele Type: VMS 370 PV Year of manufacture: 2008 Condition: used, very good Machining cross section max. round at 90° 130 mm rectangular at 90° 200 x 100 mm round at 45° 130 mm rectangle at 45° 140 x 100 mm Saw blade diameter 370 mm Saw blade width 3 mm Bore diameter 40 mm Adjustable saw blade speed 34 / 68 rpm Machine head swivels 45-90-45-30° Total motor power 2.0/2.6 kW Width 900 mm Length x width x height 1050 x 900 x 1900 mm Minimum quantity lubrication Scope of delivery: - 1x saw blade Iedpjxwl Ryofx Ag Dea - Instruction manual

Condition: good (used), Year of construction: 2013, Metal Circular Saw BEHRINGER Eisele VMS 370 Manufacturer: Behringer Eisele Type: VMS 370 Isdpfxsxwl Rmo Ag Doa Condition: used, good Year of manufacture: 2013 Machining cross section max. round at 90° 130 mm Machining cross section max. rectangle at 90° 200 x 100 mm Machining cross-section max. round at 45° 130 mm Machining cross-section max. rectangle at 45° 140 x 100 mm Saw blade diameter 370 mm Saw blade width 3 mm Bore diameter 40 mm Adjustable saw blade speed 17/ 34 rpm Machine head swivels 45-90-45-30° Total motor power 2.0/2.6 kW Minimum quantity lubrication Scope of delivery: - BEHRINGER Eisele VMS 370 metal circular saw - used saw blade - digital operating instructions - roller conveyor with stop 2m

Condition: new, Manufacturer: Behringer Eisele Type: VMS 350 Ijdpfexwl Rgjx Ag Dea Condition: NEW Machining cross section max. round at 90° 120 mm Machining cross section max. rectangle at 90° 170 x 100 mm Machining cross section max. round at 45° 120 mm Machining cross-section max. rectangular at 45° 120 x 100 mm Saw blade diameter 350 mm Saw blade width 3 mm Bore diameter 40 mm Adjustable saw blade speed 17 rpm / 34 rpm Machine head swivels 45-90-45-30° Total motor power 1.4/1.9 kW Width 900 mm Length x width x height 1050 x 900 x 1900 mm