Used Hot Rolling Mill for sale (19,095)

Condition: ready for operation (used), Year of construction: 1995, travel distance X-axis: 1,800 mm, travel distance Y-axis: 740 mm, travel distance Z-axis: 900 mm, table width: 600 mm, table load: 2,000 kg, table length: 2,000 mm, workpiece weight (max.): 2,000 kg, overall weight: 9,000 kg, Fanuc OM Hfodpfow Hq Hzsx Afnsc Spindle with size 50 taper Maximum spindle speed 2250 rpm Table 2000 x 600 mm Travel 1800 x 740 x 900 mm

Condition: ready for operation (used), Year of construction: 2001, travel distance X-axis: 3,100 mm, feed length Y-axis: 1,000 mm, feed length Z-axis: 1,600 mm, spindle speed (min.): 3,000 rpm, overall weight: 24,000 kg, heidenhain tnc 426 30 station tool changer bt spindle 50 speeds max. spindle speed 3000 rpm table 3100X1050MM max admitted weight 8000KGS strokes 3100X1000X1600MM Hjdpjrckbajfx Afnjfc chip evacuator high-pressure watering

Condition: excellent (used), Year of construction: 2011, control type: NC control, number of rollers: 4, roller (bottom) diameter: 270 mm, roller (top) diameter: 290 mm, side roll diameter: 250 mm, roller length: 3,100 mm, working width: 8 mm, sheet thickness (max.): 8 mm, overall weight: 8,200 kg, total length: 6,200 mm, total width: 1,800 mm, total height: 3,900 mm, power: 8 kW (10.88 HP), Rolling width: 3100mm Rolling thickness 3x toproll Ø:10mm Rolling thickness 5x toproll Ø:14mm Rolling thickness prebending: 8mm Top Roll Ø: 290mm Bottom Roll Ø: 270mm Side roll Ø: 250mm Number of rolls: 4 Rolling speed: 1 - 5 Top support: yes Power: 8kW Length: 6200mm Hfsdpfxjygvwds Afnec Width: 1800mm Height: 3900mm Weight: 8200kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Technical details: x-travel: 6500/13150 mm y-travel: 4000 mm z-travel: 1250 mm w-axis: 2250 mm table surface area: 5500/12150 x 3000 mm max. workpiece weight: 70.000/105.000 kg ram head dimension: 480 x 510 mm milling spindle motor: 63 kW max. torque on the spindle: 3300 Nm tool taper: DIN 39871 AD ISO 50 milling head speed: 6,3 - 4000 U/min feed speeds: 1 - 24000 mm/min w-axis: 1 - 6000 mm/min. distance between columns: 3500 mm passage: 3000 mm total power requirement: 120 kW weight of the machine ca.: 245 t Hedpfswc A Shox Afnefc dimensions of the machine ca.: 29,0 x 7,7 x 8,1 m The machine is in mint condition and was generally overhauled in 2020! with CNC SIEMENS 840 D autom. tool magazine for 153 tool stations autom. milling head magazine for 6 heads milling heads - straight - straight extended length - milling head -angular head standard - 4000 rpm, 144 x 2,5°, ISO 50 milling head -angular small extended length -40 kW, 4000 rpm, 1800 Nm, 144 x 2,5°, ISO 50 milling head -universal index - 40 kW, 4000 rpm, 2100 Nm, C-axis 144 x 2,5° , B-axis +/- 44 x 2,5°, ISO 50 coolant attachment, chip conveyor *

Condition: used, Year of construction: 2005, Technical details: Hjdpfx Afowp D Nbsnsfc turning diameter: 275 mm turning length: 900 mm spindle passage: 65 mm power capacity at 100 % load: 25/20 kW spindle turning speed range: 1 - 5000 U/min spindle diameter in front bearing: 110 mm c-axis: 1 - 500 U/min. number of workpiece supports: 4 tool turret: 1 x-axis: 290 mm y-axis: 165 mm z-axis: 360 mm b-axis: 360 ° rapid speed: 18/30 m/min number of tools: 2x2 + 2x2 number of driven tools: 2x2 + 2x2 mm toolpiece turning speed range: 8000 / 2000 U/min power capacity: 25% ED 5,8 kW tool taper: TRAUB 60 tool turret: 2/3/4 x-axis: 170 mm z-axis: 600/950 mm y-axis: +/- 60 mm rapid speed: 18/15/30 m/min number of driven tools: 10 mm toolpiece turning speed range: 1 - 6000 U/min power capacity: 25% ED 5,8 kW tool taper: DIN 69880 40 x 63 total power requirement: 95 kW weight of the machine ca.: 16 t dimensions of the machine ca.: 10,0 x 3,5 x 3,0 m with CNC TRAUB TX 8i, Barloader TRAUB Stamag DNH61 / 3000, Main and Sub spindle with C-axis 1 support with B-axis 3 turret supports dust exhauster, coolant attachment with coalescence-seperator and chip conveyor 2 pc. 3-jaw chuck SMW KNCS-N 170-43 2 pc. HAINBUCH Spanntop chuck 40 pc. various tool holder non-driven 6 pc various tool holder driven Spare parts package *

Condition: used, Year of construction: 2000, x-travel 4300 mm y-travel 1000 mm z-travel 1700 mm Hodpjyhhvhefx Afnofc Control TNC430 ja

Condition: like new (used), Year of construction: 2013, functionality: fully functional, Ficep 1201 DE Excalibur drilling machine for processing flat steel and profiles with longitudinally moving drilling unit. This machine has been completely cleaned and checked. Hfsdpfx Afjv Iamzjnjc The drilling machine has a numerically controlled, longitudinally moving drilling unit, X-axis, adjustment 0 - 15,000 mm, automatic tool change system with HSK A80 holder for 6 tool positions. Thanks to the 19 kW drill spindle drive, the drilling machine is suitable for use with carbide drilling tools. Technical details: Profiled and flat steel support with guide rail with fixed table Total length 15 m. Mobile drilling unit for longitudinal positioning on workpieces. Horizontal drill head with one drill spindle Additional drill chuck storage in X-axis direction Clamping device for securing material Position detection device Profile size - max.: 1200 x 1200 mm Number of drill spindles: 1 pc. Drill diameter: 5 - 40 mm Thread cutting: M6 - M30 Drill spindle speed: 180 - 3000 rpm Holder: HSK A 80 Tool changer: 1 x 6 For further information, please contact us

Condition: new, The Mark Super S, part of the Conventional Vertical Milling Machines category, excels as a mill drill with robust capabilities. This versatile machine is perfect for a wide array of applications, including drilling and milling of steel and non-ferrous metals. With its motorized cutter head movement and hand-wheel for precise positioning, the Mark Super S ensures that you can achieve accurate results every time. It features an infinitely variable feed on the X-axis, coupled with an automated drilling feed and a clear digital depth display for ease of use. The swiveling head allows for extensive maneuverability, while the gearbox milling head delivers powerful machining capabilities. Enhanced productivity is assured with dual gear steps for high torque, a 3-axis position indicator, and an intuitive operator interface. Even after 15 years of popularity, the Mark Super S remains a top choice for workshops and educational settings. Request a quote today to explore the advantages this mill drill can bring to your operations. Hodpfx Asqcuc Tjfnsfc

Condition: excellent (used), functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, DGUV certified until: 03/2027, type of input current: three-phase, Roll Press Fortuna Automat A 3 E + Dough Divider and Rounder Machine Top Model Roll Press Fortuna Automat, Size 3+ Simple, robust technology Head cleaning electrically operated to the rear Divider head with stainless steel blades Dough input up to 2400g Dough divider with 3 rounding plates Connection: 400V, 16A CEE plug Dimensions: 720 x 800 x 1510 mm (W x D x H) Used machine, cleaned Quality from a specialist company! Benefit from over 35 years of experience! Options: Platform or mobile chassis Rounding plates Service package Maintenance contract E-box for added safety Delivery service Instruction & commissioning We have a large selection of dough dividers! Hfedpfx Afow Tub Uensc

Condition: used, Year of construction: 1998, turning length 4.500 mm Hfsdpfx Afox Emvienjc greates pass round over bed 810 - 760 mm swing diameter over slide rest 740 mm control SIEMENS - 840 C max. turning diameter 800 mm turning diameter over slide 740 mm travel -x2 axis 875 mm travel -z2 axis 5.200 mm CNC Turning- and Milling Center | NILES-SIMMONS - N40 MCT 4500 equipped with a turret for driven tools as well as NC steady rest and tailstock. Additional equipment: - Centering points, - Jaw sets, - Clamping jaws, The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: N-40 | N 40 | N40MCT4500 | N40MCT

Condition: used, Year of construction: 2007, greates pass round over bed 670 mm swing diameter over bed slide 490 mm max. turning diameter 490 mm control SIEMENS - 840 D main spindle bore 115 mm external spindle dia. in forward position 160 mm CNC Turning- and Milling Center | HEYLIGENSTAEDT - HEYNUMAT 5 UK / 1500 equipped with a turret for driven tools as well as travelling lynette and tailstock. Additional equipment: - Centering points, - Jaw sets, - Clamping jaws, - 3 jaw chuck, A machine video from the production plant will be shared on request. Hfedpfx Aoxcbktofnoc The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: Heynumat 5 U | Heynumat 5-U | Heynumat 5 U 1500

Condition: used, Year of construction: 1998, turning length 3.000 mm greates pass round over bed 810 - 760 mm swing diameter over slide rest 740 mm control SIEMENS - 840 C max. turning diameter 800 mm turning diameter over slide 740 mm travel -x2 axis 875 mm travel -z2 axis 3.700 mm CNC Turning- and Milling Center | NILES-SIMMONS - N40 MC / 3000 equipped with a well as travelling lynette and tailstock. Additional equipment: - Centering points, - Jaw sets, - Clamping jaws, Hfjdpfexb Efrox Afnjc The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: N-40 | N 40 | N40MC3000 | N40MC

Condition: ready for operation (used), Year of construction: 1995, x-travel 300 mm y-travel 200 mm z-travel 350 mm Hfodovxllkopfx Afnjc table surface area 700 x 270 mm taper in main spindle ISO 40 turning speeds 8: 150 - 1660 U/min turning speed range - horizontal 8. 110 - 1230 U/min feeds 8: 25 - 285 mm/min weight 900 kg quill stroke 60 mm total power requirement 3,7 kW range L-W-H 1,3 x 1,38 x 1,65 m Universal tool milling machine with 2 axis digital display and swiveling vertical milling head with quill, fixed + swiveling table, slotting head, automatic feeds and rapid traverse in all three directions. Machine from a repair shop. It has only a few working hours, the accuracy is very good. Machine with a just low special price. Price new about € 24000,--. Our price is a special fix price. Machine dealer with own stock of 1600 m².

Condition: used, tool adaptor 88 length 560 mm center height of top slides 65 mm weight 17 kg Counter holder / horizontal milling device for tool milling machine Deckel Mod. FP 1 consisting of upper beam and mounting of the milling arbor. The distance Hodpfx Afev Dxzconofc from the middle of the milling arbor to the lower edge of the counter holder is 65 mm, the width of the guide is 88 mm. Machine dealer with own stock of 1600 m².

Condition: used, dia. of draw-in collets 4 - 24 mm max. radius to grind 12 mm grinding range 4 - 24 mm grinding wheel-diameter 100 mm total power requirement 0,4 kW weight of the machine ca. 100 kg Hfodpfsv Dxzpjx Afnoc dimensions of the machine ca. 1 x 0,6 x 0,4 m transport dimension 1 x 0,6 x 1,3 m Machine has 19 clamping devices 4-14 mm, 12 pieces of grinding wheels 100 mm, puller for grinding wheel. Machine dealer with own stock of 1600 m².

Condition: new, sheet width 1290 mm plate thickness 5 mm pre-bending ja roll diameter 120 mm roll speed 1 - 6 m/min total power requirement 1,1 kW weight of the machine ca. 825 kg Asymmetry roll arrangement, pre-bending ist possible. Hfjdpfx Ajvzhgpefnec This new machine is in the following sizes obtainable: working length from 1040 until 2540 mm, max. plate thickness ( 400 N/mm² ) from 1 until 6,5 mm. We are distributor only for Germany. Machine dealer with own stock of 1600 m².

Condition: ready for operation (used), Year of construction: 2010, x-travel 10000 mm y-travel 1500 mm z-travel 1000 mm passage 1300 mm passage width 1500 mm control Siemens Sinumerik 840 D turning speeds 2 Stufen: 6000 U/min Number of working hours 54821 h tool taper SK 50 Boring power 120 mm thread capacity M 55 toolpiece magazine: chain magazine 30 Stück rapid traverse X-axis 36000 m/min rapid motion Y-axis 30000 m/min rapid traverse Z-axis 30000 m/min total power requirement 36 kW dimensions of the machine ca. 12 x 11 m Gantry-style milling machine with movable portal bridge and stationary clamping table. Features: • Clamping table designed with transverse clamping beams spaced 750 mm ndard panel panels are not included. Panel panels must be purchased separately if required. • Hydraulic clamping device with clamping bridges for axis machining, includinghydraulic system • Angle drilling and milling head, n = 4000 rpm SK50 • High accuracy and stability thanks to Hirth gearing • Automatic tool change in the angle head • RWP20.50-M touch probe • Pendulum operation • Safety fence with light curtains, Sick brand • Clamping table with 750 mm transverse clamping beams • 30-position tool chain magazine on the gantry frame • Machine cooling system • Integrated water-to-air heat exchanger in the control cabinet • Unisign remote diagnostics for Siemens Sinumerik 840 D • Makrolon curtains on both sides of the gantry bridge motorized height adjustment • Partition wall with viewing window • Chip conveyor with hinged belt design • Mounting and alignment elements • Documentation Accessories: 1 spare SK50 angle drill and milling head 1 spare Hexagon RWP 20.50-M touch probe 1 2500 x 1200 mm T-slot clamping frame, which can be installed on the machineinstead of the hydraulic device. Hodpfxox S Rx Ie Afnefc Various spare parts

Condition: ready for operation (used), Year of construction: 2003, travel distance X-axis: 2,000 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 550 mm, controller manufacturer: SIEMENS, controller model: Sinumerik, table width: 550 mm, table length: 2,600 mm, spindle speed (max.): 12,000 rpm, number of axes: 4, This CHIRON MILL 2000 Vertical Machining Center was manufactured in the year 2003. It is equipped with a Siemens Sinumerik control unit. The machine has a spindle speed of 12000 rpm. Additional equipment • Chip conveyor Machine Benefits Technical Machine Benefits Hodpfx Afeyi Eh Donofc • Rapid feed 40 m/min • Tool magazine with capacity for 24 tools

Condition: used, Year of construction: 2019, travel -x axis 1.525 mm travel -y axis 770 mm travel -z axis 625 mm control HEIDENHAIN - TNC620 table dimension (L x W) 1.600 x 750 mm numbers of positions in the tool changer 24 tool taper SK50 Hfjdpfjyhrbuox Afnsc Milling machining centers - vertical | DOOSAN - MYNX 7500/50 II equipped with 24-way tool changer, ITC cooling system and chip conveyor. The machine only has 3.165h spindle hours. The machine is in a well-maintained condition. The machine video from the production plant will be shared on request. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: MYNX7500/50II | MYNX 7500 | MYNX7500 | MYNX-7500 | MYNX750050II

Condition: excellent (used), Year of construction: 2010, feed length X-axis: 650 mm, feed length Y-axis: 500 mm, feed length Z-axis: 475 mm, table width: 450 mm, table length: 1,530 mm, table load: 350 kg, X-Axis: 650mm Y-Axis: 500mm Z-Axis: 475mm Table Length: 1530mm Table Width: 450mm Table load: 350 Spindle speeds: 55 - 4000Rpm Feed rate X-Axis:6000mm/min. Feed rate Y-Axis:6000mm/min. Feed rate Z-Axis:3000mm/min. Length: 2300mm Hedpfx Ajxtbkusfnefc Width: 2550mm Height: 2200mm Weight: 2850kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 1993, condition: used, Manufacturer: Forplex Model : FL 0 Type : Hammer mill Year : 1993 Capacity : 5 - 200 Kg / h Materials: Stainless steel Rotor type: hammer blades (result: fine and very fine) Particle size selection: Screening crown Rotor diameter: 145 mm Grid inner diameter: 150 mm Hodpfjyfw Ihex Afnsfc Motor power: 2.2 kW Product feed: vibrating hopper Door security: key to start -> door locked Mobile frame on 4 wheels Support for filter

Year of construction: 1995, condition: used, Manufacturer: Forplex Model : F00 Year : 1995 Type : Hammer mill Material : stainless steel Capacity: a few kg/h. Rotor type: hammers (result: fine and medium-fine) Stator type: fixed hammers Rotor diameter: 85 mm Inner diameter of grid: 100 mm Rotor type: hammer blades (result: fine and very fine) Particle size selection: Screening crown Vibrating feed hopper Motor power: 0.55 kW (3000 rpm) Door security Mobile frame on wheels Hsdpfxeyfw Ibj Afnsfc    

Condition: used, total height: 2,400 mm, total width: 1,850 mm, total length: 1,620 mm, Empty weight: 2.500 kg - Documentation available: No - CE certificate present: No - Serial number: 71235 - Drive system: Conventional - Horizontal/vertical: Horizontal and vertical - Power [kW]: 8.5 - Number of axes [pcs]: 3 - X-axis travel [mm]: 600 - Y-axis travel [mm]: 400 - Z-axis travel [mm]: 400 - Table length [mm]: 900 - Table width [mm]: 500 - Tool holder: ISO40 - Main spindle power [kW]: 4 - Min. spindle speed [rpm]: 40 - Max. spindle speed [rpm]: 2000 - Options: Digital readout - └ Type of digital readout: Heidenhain Hsdpfx Ajx Npm Esfnjfc - Transport dimensions: 1620mm x 1850mm x 2400mm (l x w x h) - Transport weight [kg]: 2500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Year of construction: 2000, machine/vehicle number: 7853, travel distance X-axis: 5,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 2,000 mm, table length: 6,000 mm, table width: 2,000 mm, table load: 17,000 kg, Travelling column milling machine | FPT Sirio-M50 - Heidenhain control system - 60-position automatic tool changer - Coolant treatment and filtration unit - Chip conveyor Hfodpfx Afsxzzlhenjc - Cooling unit, manufacturer Deerosdassi (Italy) - Electrical cabinet - Full machine enclosure (protective housing) An inspection is possible at any time by appointment.

Condition: good (used), Year of construction: 2007, operating hours: 24,276 h, Gildemeister Lathe NEF 600 Hfodpfx Ajykbk Rsfnsc Year of manufacture: 2007 Control: Heidenhain Plus Max. turning diameter: 600 mm Centre distance: 1,250 mm Swing over bed: 600 mm Cross travel: 320 mm Main spindle: Speed range - main spindle: max. 3,000 rpm Spindle bore: 90 mm Chuck diameter: 320 mm Tool turret: Number of tool positions: 8 positions Total power requirement: 42 kVA Machine weight approx.: 5.0 t Space requirement approx.: 3.6 x 2.14 x 1.95 m Accessories: Rinsing gun, Schunk chuck 315 mm, Tailstock MK 5