Used Hot Rolling Mill for sale (19,095)

Condition: excellent (used), Year of construction: 2007, Twin drum spiral hot air oven direct from closed McD factory, this was used for pre-cooking burgers and nuggets. These machines are built for the high capacity cooking, grilling and steaming of a wide range of products, the degree of cooking, grilling or steaming is determined by the air temperature, the air speed, the air humidity and the time that the product is in the system. Electrically heated. 96m x 600mm belt. Was in use from 2007 until 2016 when the contract moved to another factory. Machine is in lovely condition, we also have everything else used in the factory - formers, fryers, coating machines, filters, spiral freezers, bagging lines etc. Please note that the photos probably show two different ovens, both are very similar. Hjdpfx Asx Altfofnefc

Condition: good (used), Year of construction: 2012, functionality: fully functional, Control: SIEMENS Spindle bore: 65 mm Turning length: 660 mm Max. speed: 6,000 rpm Counter spindle Z= 700 mm TOOL CARRIER 1 with milling spindle Milling spindle: 7,200 rpm Hfjdpfjyi Uk Iex Afnjc B-axis: 360° 14 stations with driven tools Tool speed: 7,200 rpm Travel: X= 230 / Y= ±65 / Z= 845 TOOL CARRIER 2 14 stations with driven tools Tool speed: 7,200 rpm Travel: X= 140 / Y= ±45 / Z= 810 Chip conveyor Filter Bar feeder INDEX MBL

Condition: ready for operation (used), Year of construction: 2001, JOHNFORD VTC 880 TWIN PALLET CNC VERTICAL LATHE MAKE JOHNFORD, MADE IN TAIWAN MODEL VTC 880 + APC + ATC YEAR 2001 CONTROL FANUC 18 T MAX SWING DIA 1,000 mm MAX CUTTING DIA 900.0 mm STANDARD CUTTING DIA 800.0 mm Hfedpfoukuprsx Afnjc MAX CUTTING HEIGHT 800.0 mm TRAVERSES X AXIS 50.0 mm to 810.0 mm Z AXIS 880.0 mm SPINDLE SPEEDS 10 to 800 RPM SPINDLE BEARING DIA 330.0 mm SPINDLE NOSE A2 - 11 SPINDLE MOTOR 18.5 / 22 kW TURRET TYPE AUTOMATIC TOOL CHANGER NO OF TYPES 2 X 12 ATC TOOLS SHANK SIZE BT 50 AND CAPTO PLUS FULL C AXIS MILLING TAPPING X, Z, C, A AND B AXES HIGH PRESSURE COOLANT PAPER COOLANT FILTRATION SWARF CONVEYOR FULLY OPERATIONAL FULL SET OF MANUALS GOOD RANGE OF TOOLING

Condition: good (used), Year of construction: 2008, HWACHEON HI- TECH 200B CNC LATHE MAKE HWACHEON, MADE IN SOUTH KOREA MODEL HI TECH 200B YEAR 2008 CONTROL FANUC O i-TB SWING OVER BED 500.0 mm SWING OVER SADDLE 390.0 mm MAX MACHINING DIA 350.0 mm MAX WORK LENGTH 400.0 mm TRAVERSES (XZ) X AXIS: 195.0 mm Z AXIS: 430.0 mm CHUCK DIA 250.0 mm MAX. SPINDLE SPEED 3,500 RPM SPINDLE NOSE A2-8 SPINDLE BAR CAPACITY 76 mm TURRET 12 STATIONS MACHINE WEIGHT 4,500 kgs PLUS Hfjdpst Urwhsfx Afnjc RENISHAW PROBE PARTS CATCHER TAILSTOCK SWARF CONVEYOR MACHINE MANUALS MACHINE IN GOOD WORKING ORDER

Condition: used, Year of construction: 2004, MORI SEIKI MT 2000 SZ TURN MILL CENTRE MAKE MORI SEIKI MODEL MT 2000 YEAR 2004 CONTROL MSG 501 SWING OVER CROSS SLIDE 599.5 mm SWING 749.0 mm CHUCK SIZE 250.0 mm DISTANCE BETWEEN CENTRE 1280.0 mm MAX. CUTTING DIAMETER 548.6 mm MAX. CUTTING LENGTH 1018.0 mm BAR CAPACITY 63.5 mm C AXIS 0.001 DEGREE SPINDLE RANGE 4500 rpm SPINDLE MOTOR 20 hp SPINDLE NOSE A2-6 SUB SPINDLE BAR CAPACITY 43.18 mm SUB SPINDLE MOTOR 10 hp SUB SPINDLE SPEED 6000 RPM TOOL CHANGE CAPACITY 60 STATION TURRET 12 STATIONS TRAVEL B AXIS +/- 120 DEGREE Y AXIS +/- 78.7 MM PLUS Hodpfxouq Iwpe Afnsfc CNC BARFEED PART CONVAYOR TOOL SETTING PROBE Y AXIS HIGH PRESSURE SWARF CONVAYOR FULL SET OF MANUALS GOOD RANGE TOOLING

Condition: new, Year of construction: 2026, 600 mm 500 mm 400 mm Hedpfxjyiu Rzo Afnefc 1000x500 mm 1200x250 mm 40-3200 U/min DIN 2080 ISO 40

Condition: good (used), Year of construction: 2008, functionality: fully functional, spindle speed (min.): 25 rpm, spindle speed (max.): 5,000 rpm, Equipment: documentation/manual, rotational speed infinitely variable, Okuma Multus B300-W 6-axis turning and milling center - Okuma OSP P200L - Year of manufacture: 2008 - Cutting time: 13,900 h Hsdpfjyiu Dbex Afnefc - H1 milling spindle: 6,000 rpm - Main spindle: 3,800 rpm - Sub spindle: 5,000 rpm - ATC 60 system HSKA-63 (60 tools) - Geometry in very good condition - Marpos tool sensor - Chip conveyor & coolant system with small band filter unit - Optionally extensive tool accessories available

Condition: good (used), Year of construction: 2006, functionality: fully functional, spindle diameter 125 mm x-travel 3000 mm y-travel 2000 mm z-travel 1500 mm W-axis (spindle longitudinal) 600 mm table-size 1250 x 1600 mm table load capacity - central/maximum 5000 kg Control Heidenhain iTNC 530 tool taper ISO 60 spindle turning speed range 5 - 3000 U/min spindle drive motor 37 kW max. torque on the spindle 1646 Nm transmission ratio 2 Working hours: Hjdpfeyifnuox Afnsfc - Machine on: 59.078 h - Autom. cycle: 24.207 h * CNC-control HEIDENHAIN iTNC 530 * Coolant equipment * Table B-axis, 360.000 positions

Condition: good (used), Year of construction: 2006, functionality: fully functional, spindle diameter 160 mm x-travel 8000 mm y-travel 4000 mm z-travel (RAM) 1000 mm W-axis (spindle longitudinal) 800 mm Control Heidenhain iTNC 530 tool taper ISO 50 DIN 69871 spindle turning speed range 5 - 2500 U/min spindle drive motor 40 kW Hedpfx Afeyifkvjnjfc max. torque on the spindle 2024 Nm Working hours: - Machine on: 27.315 h - Autom. cycle: 11.533 h * CNC-control HEIDENHAIN iTNC 530 * 30-pos. ATC * Floor plates 8000 x 4000 mm * Coolant equipment with coolant through spindle * Swarf conveyor * movable operators platform * Documentation

Condition: used, Year of construction: 2008, total length: 4,500 mm, total width: 1,700 mm, total height: 1,200 mm, Empty weight: 7.000 kg - Year: 2008 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 20830013 - Drive system: Teach-in - Number of rolls [pcs.]: 3 - Power [kW]: 11.0 - Max. sheet thickness [mm]: 16 - Max. working width [mm]: 2000 - Transport dimensions: 4500mm x 1700mm x 1200mm (l x w x h) - Transport weight [kg]: 7000kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Hfodpfxexdigfs Afnec Lukas van Rossum

Condition: excellent (used), Year of construction: 1999, travel distance X-axis: 1,500 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 500 mm, total length: 5,179 mm, table length: 1,800 mm, table width: 650 mm, total width: 3,345 mm, rapid traverse X-axis: 28,000 m/min, rapid traverse Y-axis: 28,000 m/min, rapid traverse Z-axis: 28,000 m/min, table load: 1,500 kg, overall weight: 7,500 kg, X - Travel: 1500mm Y - Travel: 800mm Z - Travel: 500mm Table Length: 1800mm Table Width: 650mm Table load: 1500 Feed rate X-Axis: 28000mm/min. Feed rate Y-Axis: 28000mm/min. Feed rate Z-Axis: 28000mm/min. Spindle Taper: 40ISO/Bt/Mk Power on spindle: 13.5kW Speeds / ranges: 8000Rpm ATC / revolver: 24 Coolant through spindle / Bar:10 Number of controlled axis: 3 Chip conveyor: yes Coolantsystem: yes Hfjdpjyhph Eofx Afnjc Length: 5179mm Width: 3345mm Height: 2595mm Weight: 7500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2015, XYZ 2-OP Vertical Machining Centre ProtoTRAK TMX Control (2015) Year of Manufacture: 2015 Spindle Speeds to 6,000rpm Spindle Taper BT30 Table Size 457 x 381mm Table Travels 355 x 305 x 455mm (XYZ) 6 Station ATC Rapid Traveres 15m/min Footprint 760 x 1,220 x 2500mm Weight 1100kgs 415V Electrics Air Require for ATC For sale with *Jet Machinery Ltd* Jet Machinery Stock No: #79155 Machine Serial Number: SOP02060 Cost: £17,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Hsdpjya H Nkefx Afnsfc Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: good (used), Year of construction: 2014, CUTTING MILL TYPE PALLMANN PS-H 1000 x 1400, 132 kW Hfedpfx Afeyg E Skjnec very good condition with 3 sets of rotor and stator knives with 2 sets of screens, 5 and 8 mm AVAILABLE AND READY TO WORK

Condition: good (used), Year of construction: 2014, CUTTING MILL TYPE PALLMANN PS-H 1000 x 1400, 132 kW Hfjdpfx Aoyg E Ifofnsc very good condition with 3 sets of rotor and stator knives with 2 sets of screens, 5 and 8 mm with electrical cabinet AVAILABLE AND READY TO WORK

Condition: used, Year of construction: 2001, Union KCU-130 Table Type Horizontal Boring & Milling Machine with Heidenhain TNC430 Control, X/Y/Z = 4000/3000/1500mm, Table Size 2000 x 2500 x 20,000kgs, B-axis 360 Deg, Spindle Taper BT50, 60 Position ATC, W-axis, U-axis, Swarf Conveyor, Through Spindle Coolant, Guarding Enclosure. S/No. 1370022 (2001) Please Note: Toolholders/Tooling photographed in the toolchanger will not be supplied with this machine. Any available tooling will be a specifically described. Hfedpfxex T Ddys Afnsc Please Note: This Lot is located in Irvine. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: excellent (used), Year of construction: 2019, travel distance X-axis: 450 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 350 mm, feed rate X-axis: 5,000 m/min, feed rate Y-axis: 5,000 m/min, feed rate Z-axis: 5,000 m/min, total height: 2,220 mm, total width: 2,300 mm, total length: 1,990 mm, table width: 400 mm, table length: 800 mm, rotational speed (min.): 5,000 rpm, table load: 300 kg, overall weight: 2,200 kg, Universal milling machine with toolmaker precision  Small-batch production to complex workpieces Vertical milling head with hydraulic tool clamping Y and Z Milling Handwheel in all three axes Linear guideways in all three axes Workspace guard retractable with large chip shield Main motor with spindle brake    X - Travel: 450mm Y - Travel: 400mm Z - Travel: 350mm Table Length: 800mm Table Width: 400mm Hedpsyha Atjfx Afnjfc Table load: 300 Feed rate X-Axis:5000mm/min. Feed rate Y-Axis:5000mm/min. Feed rate Z-Axis:5000mm/min. Spindle Taper: 40ISO/Bt/Mk Power on spindle:10kW Speeds / ranges:5000Rpm Length: 1990mm Width: 2300mm Height: 2220mm Weight: 2200kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, mileage: 253,480 km, power: 265 kW (360.30 HP), first registration: 02/2015, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: orange, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), AROCS – GERMAN VEHICLE DOCUMENTATION, 6x4, AIR-SUSPENDED REAR AXLES, SUN VISOR, BEACON LIGHTS, WHEELBASE 3.60m, ELECTRIC WINDOWS/MIRRORS, SEAT/MIRROR HEATING, REVERSING CAMERA, AUTOMATIC GEARBOX, REINFORCED ENGINE BRAKE, DIFFERENTIAL LOCKS, ABS, ASR, WORK LIGHTS, STORAGE BOX, ADJUSTABLE REAR UNDERRUN PROTECTION, HYDRAULICS TO REAR, AIR CONDITIONING, HOOKLIFT HIAB MULTILIFT XR21S46, SLIDING HOOK, HYDRAULIC CONTAINER LOCKING, GOOD TIRES, 21T CAPACITY, INSPECTION–MAINTENANCE–WARRANTY AT ADDITIONAL COST Hfjdpfxoyh Nb As Afnec

Condition: good (used), Year of construction: 2011, functionality: fully functional, number of driven tool stations in tool turret 1: 48, number of driven tool stations in tool turret 2: 12, Available immediately and can be viewed under power. Upper X Y Z ballscrews fully refurbished mid 2023 by UK company. Included as shown in pictures -- Live tooling turret NA44A/BMT44 -- Capto C4 milling -- Capto C4 turning holders -- Capto C4 extensions -- 3 x Dual Capto C4 for turret -- Various other turret holders as pictured -- See attached spreadsheet (PDF below), for included holders. -- Renishaw arm -- Part catcher arm + converyor (not used for a long time) -- Old version of CAMplete TurnMill with USB dongle TECHNICAL DETAILS - Number of axes : 9 - Number of spindles : 2 MAIN SPINDLE - Spindle nose : A2-5 - Spindle power : 11 [kW] - Spindle speeds : 4500 [rpm] - Max. bar diameter : 65 [mm] - Max. turning diameter : 200 [mm] - C axis indexing precision : 0,001 [°] COUNTER-SPINDLE - Spindle nose : A2-5 - Spindle power : 11 [kW] - Spindle speeds : 5000 [rpm] - Max. bar diameter : 51 [mm] - Max. turning diameter : 200 [mm] - C axis indexing precision : 0,001 [°] - Travel : 780 [mm] - Spindle / counter-spindle distance : 980 [mm] Hfjdpoycl Epofx Afnec TURNING-MILLING SPINDLE - X/Z stroke : 570/1297 [mm] - Y stroke : +/- 100 [mm] - B Axis stroke : 190 (+/-95) [°] - Tool type : Capto C4 - Spindle speeds : 12000 [rpm] - Spindle power : 7,5 [kW]

Condition: like new (used), Year of construction: 2015, operating hours: 3,886 h, functionality: fully functional, turning length: 685 mm, turning diameter over cross slide: 650 mm, spindle speed (max.): 4,000 rpm, spindle bore: 91 mm, travel distance X-axis: 267 mm, travel distance Z-axis: 600 mm, rapid traverse X-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, chuck outer diameter: 250 mm, swing diameter over cross slide: 650 mm, spindle nose: A2-8, overall weight: 5,200 kg, Equipment: documentation/manual, rotational speed infinitely variable, This DMG MORI CLX 450 V3 is standard equipped with: - PROGRESSLine (display of remaining production time and piece count for a complete machining process). - Interface for barfeeder. - Chip conveyor. - High-pressure pump (12 bar). - New 3-jaw chuck (SMW AUTOBLOK type BB-D Ø250) incl. sets of jaws. - Workpiece catcher/dispenser. Hfsdpfx Ajyguqijfnjc - Original DMG mist extraction system. - Foot pedal for clamping/unclamping main spindle. - Rinsing gun (5 bar). - Original DMG documentation.

Condition: new, Face milling cutter (28465) Make Widia Face Mill Hfodpforwfpxox Afnec M 640,Type 125 B 12 RS 60 HP 06D Diameter 125 mm 12 cutting edges new and unused in opened packaging

Condition: new, Copy and face milling head (28466) Make Widia Hsderwfpfopfx Afnsfc Type M 100 Copy Mill D 63 OZ5 diameter 63 mm in opened original packaging

Condition: ready for operation (used), Year of construction: 1981, Bridgeport BR2J2 Turret Milling Machine Digital Readout Spindle Taper R8 Table Size 1065 x 230mm Table Travel: X - 765mm Y - 305mm Knee Travel: Z - 405mm Quill Travel Z - 127mm Coolant 415V Electrics Coolant Hfjdpjyary Ijfx Afnjc For sale with *Jet Machinery Ltd* Jet Machinery Stock No: #79044 Machine Serial Number: 362070681W Cost: £4,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: good (used), Year of construction: 2004, turning length: 1,000 mm, Machine details Manufacturer/Type: Mazak Quick Turn Nexus 350M Year of manufacture: 2004 (11/2004) Control unit: Mazatrol 640T Nexus Turning length: 1,200 mm Max. swing diameter: 750 mm Standard machining diameter: 336 mm Max. machining diameter: 420 mm Bar capacity: 102 mm Max. spindle speed: 4,000 rpm Tool turret: 12 stations Chuck: Kitagawa 12" hydraulically actuated 3-jaw chuck Tailstock present Machine weight: approx. 7,500 kg Accessories 4 × driven tools Multiple Mazak tool holders in turret Additional jaws and accessories available Chip conveyor, coolant tank Loaded free on truck. Hfjdpfx Afewfynfjnjc

Condition: used, Year of construction: 2008, functionality: fully functional, 5-Axis Simultaneous Machining Center MAZAK Variaxis 630-5X II T with Turning Function Control: MAZATROL Matrix Year of manufacture: 2008 Travel - X: 630 mm Travel - Y: 765 mm Travel - Z: 600 mm a-axis: +30 ~ -120° c-axis: +/- 360° Hfsdpsx Db D Aefx Afnjc Max. machining diameter: 730 x 500 mm Max. working height: 500 mm Number of tool changer positions: 120 Tool holder: HSK 63T Max. spindle speed: 18,000 rpm Max. rotary table speed: 1,100 rpm Rotary table diameter: 630 mm Workpiece swing diameter: 730 mm Accessories: - Chip conveyor and tank - Through-spindle coolant (IKZ) - Showa oil mist extraction system - Renishaw probe The machine is in very good condition and can be inspected under power at its current location.

Condition: used, Rolling Machine Brand: JAMMES PROMECAM Type: HC 1310 Maximum thickness: 10 mm Maximum length: 3040 mm Rolling capacity: 1500 mm Upper roller diameter: 300 mm Side roller diameter: 220 mm Hfodpfewf Ndisx Afnoc Working speed: 0 to 7 m/mm Hydraulic control 1 hp motor Hydraulic unit motor: 5.5 kW Weight: 7000 kg Dimensions: 5100 x 1000 x 1000 mm Type: 4-roller rolling machine