Used Horizontal Machining Center for sale (69,584)

Condition: good (used), Year of construction: 2002, Technical details are shown on picture. Parts shown on pictures not come. Itsdpfxjw U Alqo Aacjn

Condition: good (used), Year of construction: 2009, Traverses XYZ 850 x 700 x 750 mm, Pallet size 500 x 500mm, pallet load 500 kgs, 60 ATC, BT40 spindle taper, Fanuc 31i- control. Spindle power 22Kw, B axis 0.001 Degrees, 14000 rpm spindle, swarf conveyor, Through Spindle Coolant. Itodpfx Aswq Iwxjacsn

Condition: excellent (used), A horizontal machining center from the manufacturer Mori Seiki is being offered here. 11 machine pallets are included in the delivery. The machine is equipped with glass scales and therefore offers high precision. The machine is in very good condition and can be viewed in our hall. The machine will be loaded onto a truck free of charge. Manufacturer: Mori Seiki Type: SH-403 Year of manufacture: 2000 Control: Mori Seiki MSG-501 (Fanuc) Technical data: Travel paths X-Y-Z: 560x510x510 mm B-axis travel: 0.001° (360,000 positions - full-value B-axis) Rapid traverse X-Y-Z: 42 m/min Iedpfx Aaewn Hhkecetn Spindle speed: 12,000 rpm Spindle motor: 22 kW Tool holder: ISO 40 Tool magazine: 180 positions Tool change time: 1.3 s Interference circle: max. 610 mm Pallet size: 400x400 mm Number of pallets: 2 Total power requirement: 67 kVA Required space: 5500x4000 mm Machine dimensions: 5400x2500x2800 mm Machine weight: 11,500 kg Scope of delivery: spindle internal cooling, Knoll coolant system, chip conveyor, transformer, 11x machine pallets

Condition: ready for operation (used), Year of construction: 2002, operating hours: 725 h, functionality: limited functionality, machine/vehicle number: HSS40050, spindle speed (min.): 3,100 rpm, spindle speed (max.): 14,000 rpm, No reserve price – guaranteed sale to the highest bidder! Submission of a bid obligates the buyer to collect the item by 26/09/2025. TECHNICAL DETAILS Spindle fault: The spindle is malfunctioning and currently only runs stably above approximately 3,100 rpm. The cause may be either a wiring issue in the control system or an internal fault in the spindle at lower speeds. Stable spindle speed from: 3,100 rpm Max. spindle speed: 14,000 rpm MACHINE DETAILS Operating hours (Machining): 725 h Operating hours (Cutting): 478 h EQUIPMENT - FANUC control with SEICOS interface - Twin pallet changer Itjdpfx Aaoxal Rlocon - Machine table adjustable in 1° increments

Condition: good (used), Year of construction: 2002, Heckert CWK 400 D, year 2002, Siemens 840 D control, X/Y/Z travel 650/650/650 mm, 240-position tool changer, HSK 63 spindle taper, spindle speed up to 10,000 rpm, internal coolant supply 30 - 50 bar, NC rotary table Ø 460 mm, six-pallet changer 500 x 400 mm, chip conveyor, new spare spindle, 25 HSK holders. Itedpow Uf Hksfx Aacsn

Condition: used, Year of construction: 1999, control Siemens 840D Number of axles 4 St. 2 toll turrets 160 tool taper HSK 63 spindle turning speed range 24.000 U/min Itedpfx Aajqn A Rvocjn filter unit Ja chip conveyor Ja kW

Condition: ready for operation (used), operating hours: 13,245 h, functionality: fully functional, travel distance X-axis: 700 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 700 mm, table load: 800 kg, spindle speed (max.): 5,000 rpm, TECHNICAL DETAILS Itjdpexghcdofx Aacjn Travel Range X: 700 mm Travel Range Y: 800 mm Travel Range Z: 700 mm Table Size: 500 mm × 500 mm Rotary Table: indexed in 1° increments, 360 positions Table Load Capacity: 800 kg Spindle Speed: 5,000 rpm Distance Spindle Nose to Table Surface: 150 mm – 850 mm Tool Holder: BT 50 Tool Magazine (ATC): 60 stations, chain magazine Maximum Tool Length: 450 mm MACHINE DETAILS Control: CNC OSP U100M Dimensions & Weight Machine Weight: 21,000 kg Dimensions (L x W x H): 5,500 x 3,160 x 3,300 mm Operating Hours Spindle Hours: 13,245 h Power-On Hours: 27,372 h EQUIPMENT Chip conveyor Table-mounted Tool Presetter 2 tables with MAS bores for clamping

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, spindle speed (max.): 6,000 rpm, power: 0.03 kW (0.04 HP), Equipment: chip conveyor, documentation/manual, Options : Concept 2000 chip conveyor 120 HSK 100 tools Spindle center coolant 70 bar 0.001° indexing table Tool gauge Tooling Renishaw OMP 60 Performance package Hard metal package High-speed 3D package SMOOTHING control 2 additional paddles Isdjtrd H Uepfx Aacetn Auto power ON/OFF 3-color lamp 8 MB memory expansion Electronic handwheel

Condition: excellent (used), Year of construction: 2000, A horizontal machining center from the manufacturer Mori Seiki is being offered here. 12 machine pallets are included in the delivery. The machine is equipped with glass scales and therefore offers high precision. The machine is in very good condition and can be viewed in our hall. The machine will be loaded onto a truck free of charge. Manufacturer: Mori Seiki Type: SH-403 Year of manufacture: 2000 Control: Mori Seiki MSG-501 (Fanuc) Technical data: Travel paths X-Y-Z: 560x510x510 mm B-axis travel: 0.001° (360,000 positions - full-value B-axis) Rapid traverse X-Y-Z: 42 m/min Spindle speed: 12,000 rpm Spindle motor: 22 kW Tool holder: ISO 40 Tool magazine: 180 positions Tool change time: 1.3 s Interference circle: max. 610 mm Ijdpfown Hiuox Aacjtn Pallet size: 400x400 mm Number of pallets: 2 Total power requirement: 67 kVA Required space: 5500x4000 mm Machine dimensions: 5400x2500x2800 mm Machine weight: 11,500 kg Scope of delivery: spindle internal cooling, Knoll coolant system, chip conveyor, transformer, 12x machine pallets

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, travel distance X-axis: 760 mm, travel distance Y-axis: 760 mm, travel distance Z-axis: 760 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 60 m/min, controller model: P200M, spindle speed (max.): 15,000 rpm, number of slots in tool magazine: 64, tool length: 300 mm, tool diameter: 150 mm, Equipment: chip conveyor, Transport, installation, and commissioning – we deliver your machine ready for operation (optional) Machine type: Horizontal Machining Center Manufacturer: Okuma Model: MB-5000H Space Center Year of manufacture: 12.2010 Commissioned: End of 2011 Control system: OSP-P200M Delivery time: by arrangement 👉Spindle speed 15,000 rpm 👉ConSep coolant filtration system 👉Tool magazine – 64 positions The machining center is in very good overall condition. The machine is suitable for both heavy-duty machining and fine finishing operations. Thanks to its comprehensive basic and additional equipment, including a ConSep coolant filtration system, high-pressure coolant pump up to 70 bar, 64-position tool magazine, dual pallet changer, and spindle speed up to 15,000 rpm, your production becomes significantly more efficient. The machine operates accurately and precisely. Machine features 👉ConSep coolant filtration system with chip conveyor 👉High-pressure coolant pump up to 70 bar 👉Spindle speed 15,000 rpm 👉64-position tool magazine 👉Dual pallet changer Technical data Travel X-axis (column right-left): 760 mm Z-axis (table front-back): 760 mm Y-axis (spindle up-down): 760 mm Rapid traverse X/Y/Z axes: 60 m/min Distance pallet to spindle center: 50–810 mm Distance pallet center to spindle nose: 135–895 mm Palette Pallet size: 500×500 mm B-axis indexing: 1° Max. load capacity: 500 kg Pallet changer: dual Spindle Spindle speed: 15,000 rpm Spindle power: 26 kW Max. torque: 199 Nm Tool holder: BT40 Tool magazine: 64 positions Max. tool diameter (adjacent tools fitted): 70 mm Max. tool diameter (no adjacent tools): 150 mm Max. tool length: 300 mm Max. tool weight: 10 kg Itsdpfx Aow S Hcbeacjn Options 👉Transport organization and execution 👉Machine rigging and installation 👉Machine commissioning and production-ready handover

Condition: good (used), Year of construction: 2000, functionality: fully functional, Control: CNC path control with color screen SEIKOS 16 M Itjdpfxew Ud U Tj Aacjn TECHNICAL SPECIFICATIONS Working area: X-axis (table traverse): 680 mm Y-axis (spindle head vertical): 680 mm Z-axis (column longitudinal): 680 mm Pallet clamping surface: 500 x 500 mm Drive power (50% DC/continuous): 25/22 kW Speed range (2 stages): 60 – 12,000 rpm Tool holder DIN 69871: A 40 Tool changer (chain magazine) Number of magazine positions: 60 Max. tool diameter: 95/160 mm Chip-to-chip time: 3.8 sec EQUIPMENT/ACCESSORIES - Full enclosure with sliding door, electrically interlocked, incl. work area lighting - 2-way pallet changer - Automatic tool changer ATC 60 - Chip conveyor - Coolant system with 3 pumps, 100 l tank - Coolant supply via spindle collar approx. 25/40 bar - Work area washdown - Broken drill detection (controllable via G-code) - Tool measurement (controllable via G-code) - Electronic handwheel - 2 additional pallets - Table with 1° indexing - Spindle electronically positionable - Installation elements - Documentation

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, travel distance X-axis: 950 mm, travel distance Y-axis: 720 mm, travel distance Z-axis: 760 mm, table width: 630 mm, table length: 630 mm, TECHNICAL DETAILS Travel distances X-axis travel: 950 mm Y-axis travel: 720 mm Z-axis travel: 760 mm Spindle Spindle speed range: 12,000 rpm Work table Table outer length: 630 mm Table outer width: 630 mm MACHINE DETAILS Control: Fanuc Series 16I-M Dimensions Itjdpfx Aajw Nwupocon Machine width: 3,200 mm Machine height: 3,200 mm

Condition: used, Horizontal machining center with pallet changer STEINEL type BZ 24 FFZ with CNC control SIEMENS Sinumerik 850 M serial no. 77 year of construction 1990 Travel X: 630 mm, Y: 500 mm, Z: 500 mm Table size per pallet 400 x 400 mm Pallet rotation B-axis Spindle speed max. 7100 rpm infinitely variable Tool holder ISO 40 Mains connection 380 Volt, 50 Hz, 80 Amp. Itodpfx Ajdzqmrjacen - Tool changer with 60 tool positions and double arm gripper - Pallet changer with 4 pallets - Horizontal pallet position for machining, axis movement = X-axis - Pallet rotation = B-axis - Spindle ram as Z-axis - Spindle ram with transverse movement as Y-axis - KSS spray nozzles on the spindle ram and in the work area - Coolant device with chip conveyor under the work area - CNC control SIEMENS Sinumerik 850 M - Interface for data transfer Space requirement L x W x H 9000 x 3100 x 3200 mm Weight 13.5 tons Transport dimensions on truck: Machine with tool magazine L x W x H 9000 x 3000 x 3000 mm Chip conveyor L x W x H 4700 x 1000 x 1450 mm Container loading into a 40" OT HC is possible. good condition

Condition: like new (used), Year of construction: 2018, operating hours: 6,700 h, functionality: fully functional, machine/vehicle number: 390.829, workpiece length (max.): 5,600 mm, workpiece width (max.): 1,000 mm, workpiece height (max.): 60 mm, workpiece weight (max.): 75 kg, total height: 1,409 mm, total length: 1,484 mm, total width: 2,325 mm, table width: 1,000 mm, table height: 915 mm, table length: 1,484 mm, rotational speed (max.): 20,000 rpm, overall weight: 1,600 kg, spindle speed (min.): 1,000 rpm, spindle speed (max.): 20,000 rpm, spindle motor power: 5,500 W, number of spindles: 1, number of slots in tool magazine: 1, input voltage: 400 V, type of input current: three-phase, input current: 32 A, Equipment: documentation/manual, For sale due to acquisition of a new machine: our Gannomat Protec 571 CNC machining center, purchased new in 2018. The Gannomat Protec CNC machining center is a high-precision woodworking machine designed for efficient drilling, milling, and grooving operations. Engineered for versatility and accuracy, it is ideal for producing furniture components and panels. Its advanced automation and robust construction ensure repeatable results and significant time savings in production. This machining center is especially suitable for workshops aiming to optimize productivity and achieve seamless machining processes. Technical specifications: - Workpiece width X: 60 - 1000 mm - Workpiece length Y: 250 - 5600 mm - Workpiece height Z: 6 - 60 mm - Workpiece weight: 75 kg - Rapid machining: 21 drilling spindles - Stable grooving unit: 8.3 mm saw blade width - Powerful milling unit: 5.5 kW (S1), with reversible rotation - Compact footprint: Less than 3.3 m² Including with the machine: - Drilling tools and 1 pc. HSK63 chuck and tool for modern joinery applications. Optional software: - Gannomat Editor office software: €1,000 (installation and activation by Gannomat for an additional fee) - DXF postprocessor for efficient operation: €1,000 (installation and activation by Gannomat for an additional fee) ATTENTION: Low operating hours. Itodpoxltluofx Aacjn The price of the machine does not include VAT.

Condition: used, Year of construction: 2009, Offered here is a used machining center from manufacturer Deckel Maho DMG. The machine is in good condition and can be inspected at our facility. Free loaded on truck (FCA) Manufacturer: DMG Deckel Maho Model: DMC 125 H duoBlock Year of manufacture: 2009 Control: Siemens 840 D Solutionline (PCU 50) Technical Data: Travel distances X/Y/Z axis: 1250 x 1000 x 1000 mm Feed rate X/Y/Z axis: 20 - 60,000 mm/min Rapid traverse X/Y/Z axis: 60 m/min B-axis travel: 360 x 0.001° Feed rate B-axis: 10,800 °/min Max. rotary table speed: 30 rpm Spindle speed: 20 - 8000 rpm Transmission stages: 2 Max. workpiece diameter: 1250 mm Max. workpiece height: 1580 mm Clamping surface: 800 x 800 mm Max. workpiece weight: 1500 kg Pallet weight: 570 kg Max. permissible weight difference for pallet loading: 1000 kg Tool holder: SK 50 according to DIN 69871 Max. tool length: 650 mm Transport dimensions: 6500 x 3000 x 3200 mm Transport weight of machine (without magazine or other accessories): approx. 20,000 kg Required floor space: approx. 7000 x 6000 mm Itodpfxjw Ew T Sj Aacjn Total weight of machine: 24,000 kg Accessories: • Chip conveyor with coolant tank • Coolant system • 4x machine pallets • Tool magazine • Oil mist extraction unit Miscellaneous new spare parts: • 1x linear measuring system Y-axis • 1x lubrication unit 230V 0.12 30bar • 1x gear unit P-AGG*MKF1-KW2-20036 • 1x Cyclo gearbox*F1C- A25 • 1x retrofit kit for power module • 1x lifting devices for the machine

Year of construction: 2021, condition: as good as new (ex-display), Highlights: - Powerfull motorizied spindle 16.000 U/min | 206 Nm - Hydraulic clapming for fixtures - Latest Machine Generation Basic machine G640 Work area travel range: X = 1.050 mm, Y = 800 mm, Z = 1.050 mm Power supply 400 V, 50 Hz, TN-S Decentralized work area mist collector Machine cooling system with an air-cooled cooling unit Machine control series FANUC 31i-MODEL B Plus Cycle package for measuring probes (RENISHAW) Control panel to enter tool data at tool loading and unloading position Rotary table with GROB pallet clamping system (B-axis) Motorized spindle HSK-A 63, 16,000 rpm, 159/206 Nm, 25/32 kW, oil-air lubrication GROB spindle diagnostics GSD Single disc-type magazine HSK-A 63 with 50 pockets Tool cleaning device Electromechanical tool breakage detection device Twin palette changer Setup station driven by a three-phase servomotor Setup station door, manually-operated, for manual loading/unloading Additional control panel Pallet 630 x 630 mm, T-slots Equipping the pallet with 12 fluid connections Scraper-type conveyor, discharge height 1,100 mm Iedpfx Aaslaugaecstn High-pressure cutting fluid system (23 bar, ICS) Compressed air feed through spindle center External compressed air supply via a flexibly adjustable hose Cutting fluid recirculation on the weekend Flush gun at the work area Air gun at the work area Part clamping system in work area, customer-specific Hydraulic power unit for the part clamping system KP1: Pressure oil, proportional valve technology, 30-190 bar (H2.1) KP2: Pressure oil, proportional valve technology, 30-190 bar (H2.1) KP3: Pressure oil, proportional valve technology, 30-190 bar (H2.1) KP4: Pressure oil, proportional valve technology, 30-190 bar (H2.1) KP5: Pressure oil, manual pressure reduction, 30-200 bar (H1.1) KP6: Pressure oil, manual pressure reduction, 30-200 bar (H1.1) Cooling unit for hydraulic proportional valves Part clamping system in setup station of pallet changer, customer-specific KP1: Pressure oil, proportional valve technology, 30-190 bar (H2.1) KP2: Pressure oil, proportional valve technology, 30-190 bar (H2.1) KP3: Pressure oil, proportional valve technology, 30-190 bar (H2.1) KP4: Pressure oil, proportional valve technology, 30-190 bar (H2.1) KP5: Pressure oil, manual pressure reduction, 30-200 bar (H1.1) KP6: Pressure oil, manual pressure reduction, 30-200 bar (H1.1) KP7: Compressed air, seating check system (P2.1) KP8: Compressed air, seating check system (P2.1) KP8: Compressed air, seating check system (P2.1) KP10: Compressed air, seating check system (P2.1) KP11: Compressed air, manual pressure regulation, 0.5-5 bar (P1.1) KP12: Compressed air, manual pressure regulation, 0.5-5 bar (P1.1) Touch probe Renishaw RMP60 12-month warranty

Condition: used, Year of manufacture 1997 2 grid tables Working area X 3,900 mm Ijdpew Uf N Sjfx Aacetn Working area Y 1,600 mm Working area Z 200 mm Additional images available

Condition: used, TECHNICAL DETAILS - Number of axes : 4 MILLING SPINDLE - Tool holder type : BT50 - Spindle power : 40 [kW] - Spindle speeds : 12000 [rpm] - Gearbox - Speed ranges : 2 Itedpfx Aajw Ephbjcjn LINEAR AXES - Travels on X/Y/Z axes : 2400/1650/1750 [mm] - Rapid traverses rates (X/Y/Z) : 42 [m/min] - Cutting feed rates (X/Y/Z) : 20 [m/min] B ROTARY AXIS - Travel : 360 [°] - Indexing precision : 0.001 [°] TOOL CHANGER - Auto. Tool Changer type : Bras chargeur - Tool magazine capacity : 116 - Tool exchange time : 3.8 [sec] PALLET CHANGER - Pallet changing device type : Rotopalette - Pallet size : 1600 x 1250 [mm] - Pallets number : 2 - Maximum weight upon pallet : 5000 [kg] - Distance table center / spindle nose (min./max.) : 100 - 1750 [mm] - Maximum workpiece diameter : 2500 [mm] - Maximum workpiece height : 1850 [mm] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 86 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 9.485 x 6.155 [mm] - Machine height : 4.370 [mm] - Machine weight : 50000 [kg] MACHINE HOURS - Number of working hours : 15446 [h] EQUIPMENT - CNC : Fanuc 31i-model B5 Interface : Ethernet / RS232 / USB / PCMCIA - SOFT SCALE II - Electronic handwheel - Rigid tapping - 3 colors status lamp - Coolant tank * with high-pressure pump : 70 [bars] * Coolant through spindle * with paper filtering unit * with cooling unit for coolant * With washing gun * With cabin washing - Chips conveyor - Spindle cooling unit - Tool probe - Workpiece probe : Renishaw RMP60 - Tool breakage detection : SOFT AC - Pallets number : 2 - Milling vice - Tool-holders

Condition: used, Machine not operational, control system does not start Horizontal Machining Center with Pallet Changer STEINEL Type BZ 24 FFZ with CNC Control SIEMENS Sinumerik 850 M Serial No. 58 Year of manufacture 1990 Travels X: 630 mm, Y: 500 mm, Z: 500 mm Table size per pallet 400 x 400 mm Iedpfedzqmfjx Aacjtn Pallet rotation B-axis Spindle speed max. 7100 rpm, infinitely variable Tool holder ISO 40 Power supply 380 Volt, 50 Hz, 80 Amp. - Tool changer with 60 tool positions and double-arm gripper - Pallet changer with 4 pallets - Horizontally positioned pallet station for machining, axis movement = X-axis - Pallet rotation = B-axis - Ram spindle as Z-axis - Ram spindle with cross movement as Y-axis - Coolant spray nozzles on the ram spindle and in the work area - Coolant system with chip conveyor beneath the work area - CNC Control SIEMENS Sinumerik 850 M with TFT monitor - Interface for data transfer Space requirement (L x W x H) 9000 x 3100 x 3200 mm Weight 13.5 tons Machine not operational, control system does not start – otherwise in good condition Transport dimensions: Machine with tool magazine L x W x H 9000 x 3000 x 3000 mm Chip conveyor L x W x H 4700 x 1000 x 1450 mm

Condition: used, TECHNICAL DETAILS - Number of axes : 4 MILLING SPINDLE - Tool holder type : BT40 - Spindle power : 22 [kW] - Spindle speeds : 12.000 [rpm] LINEAR AXES - Travels on X/Y/Z axes : 560 x 560 x 560 [mm] - Rapid traverses rates (X/Y/Z) : 40.000 [mm/min] - Cutting feed rates (X/Y/Z) : 1 - 20.000 [mm/min] B ROTARY AXIS - Travel : 360 [°] - Indexing precision : 1 [°] TOOL CHANGER - Auto. Tool Changer type : Bras chargeur - Tool magazine capacity : 60 Iodpsuhbv Eofx Aacjtn - Tool exchange time : 1,2 [sec] PALLET CHANGER - Pallet changing device type : Rotopalette - Pallet size : 400 x 400 [mm] - Pallets number : 2 - Maximum weight upon pallet : 400 [kg] - Distance table / spindle axis (min./max.) : 80 - 640 [mm] - Distance table center / spindle nose (min./max.) : 150 - 710 [mm] - Maximum workpiece diameter : 600 [mm] - Maximum workpiece height : 700 [mm] POWER SUPPLY - Supply voltage : 400 [V] WEIGHT & DIMENSIONS - Machine floor space : 3.600 x 3.750 [mm] - Machine height : 2.828 [mm] - Machine weight : 9.500 [kg] MACHINE HOURS - Number of hours under power : 9.893 [h] - Number of working hours : 2.138 [h] EQUIPMENT - CNC : Fanuc 18-iM - Electronic handwheel - Rigid tapping - Coolant tank * Coolant through spindle * With cabin washing - Chips conveyor - Spindle cooling unit

Condition: used, Horizontal machining center with 2-fold shuttle table STEINEL type BFZ 5 with CNC control SIEMENS Sinumerik 810 M serial no. 34 year of construction 1988 Travel X: 500 mm, Y: 400 mm, Z: 320 mm Clamping surface, table surface 500 x 400 mm Tool holder ISO 40 Spindle speed max. 6300 rpm infinitely variable Main spindle drive 12 kW Itedpfsutuyiox Aacsn Mains connection 380 Volt, 50 Hz, 30 kVA - Tool changer with 24 tool positions - Changing table with 2 stations - Interface for data transfer - Coolant unit with chip conveyor Space requirement L x W x H 4100 x 2500 x 2650 mm Weight approx. 8 tons good condition Transport dimensions: Machine L x W x H 3200 x 2500 x 2650 mm, approx. 7.5 tons. Chip conveyor L x W x H 3500 x 1100 x 2100 mm, approx. 600 kg

Condition: used, TECHNICAL DETAILS - Number of axes : 4 MILLING SPINDLE - Tool holder type : BT40 BIG PLUS - Spindle power : 26 [kW] - Spindle speeds : 15000 [rpm] LINEAR AXES - Travels on X/Y/Z axes : 560/640/640 [mm] - Rapid traverses rates (X/Y/Z) : 60 [m/min] B ROTARY AXIS - Travel : 360 [°] - Indexing precision : 0.001 [°] TOOL CHANGER - Auto. Tool Changer type : Bras chargeur - Tool magazine capacity : 60 PALLET CHANGER - Pallet changing device type : Rotopalette - Pallet size : 400X400 [mm] - Pallets number : 2 - Maximum weight upon pallet : 400 [kg] - Maximum workpiece diameter : 630 [mm] - Maximum workpiece height : 900 [mm] POWER SUPPLY - Supply voltage : 400 [V] WEIGHT & DIMENSIONS - Machine floor space : 4100X2300 [mm] - Machine height : 2720 [mm] - Machine weight : 11000 [kg] MACHINE HOURS - Number of working hours : 3700 [h] EQUIPMENT - CNC : Fanuc 31 iB Interface : Ethernet / RS232 / USB / PCMCIA - Electronic handwheel - Linear scales - Rigid tapping - 3 colors status lamp - Coolant tank * with high-pressure pump : 25 [bars] * Coolant through spindle * With cabin washing - Chips conveyor : Arrière - Spindle cooling unit Itjdpfxeuhbv So Aacjn - Tool probe - Workpiece probe : Renishaw OMP60

Condition: used, TECHNICAL DETAILS Iodpeuhbwvefx Aacotn - Revolver head TRH308 with turret equipped as shown on the picture * Max. power : 12 [kW] * Max. torque during machining : 250 [Nm] * Weight : 100 [kg]

Condition: used, TECHNICAL DETAILS - Number of axes : 4 MILLING SPINDLE - Tool holder type : HSK63 - Spindle power : 22 / 26 [kW] - Spindle speeds : 100 - 10.000 [rpm] LINEAR AXES - Travels on X/Y/Z axes : 800 x 600 x 800 [mm] - Rapid traverses rates (X/Y/Z) : 40 [m/min] B ROTARY AXIS - Travel : 360 [°] - Indexing precision : 0,001 [°] - Rapid traverse rate : 13,88 [rpm] TOOL CHANGER - Auto. Tool Changer type : Bras chargeur - Tool magazine capacity : 60 - Tool exchange time : 2,2 [sec] PALLET CHANGER - Pallet changing device type : Rotopalette - Pallet size : 630 x 500 [mm] - Pallets number : 2 - Maximum weight upon pallet : 900 [kg] - Distance table / spindle axis (min./max.) : 43 - 643 [mm] - Distance table center / spindle nose (min./max.) : 145 - 945 [mm] - Maximum workpiece diameter : 740 [mm] - Maximum workpiece height : 550 [mm] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 56 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 5.244 x 3.305 [mm] - Machine height : 3.345 [mm] - Machine weight : 10.000 [kg] MACHINE HOURS - Number of working hours : 9.095 [h] EQUIPMENT - CNC : Fanuc 0i-MD - Interface : Ethernet / RS232 / USB / PCMCIA - Interactive programming : Manual guide - Electronic handwheel - Linear scales - Rigid tapping - 3 colors status lamp - Coolant tank : 700 [l] * with oil separator * with high-pressure pump : 40 [bars] * Coolant through spindle * with paper filtering unit * With washing gun * With cabin washing - Parts hydraulic clamping : prepared - Hydraulic counter balance : upon Y axis - Chips conveyor - Spindle cooling unit - Tool-holders : 35 Itodpfx Aasuhb D Necon

Condition: used, TECHNICAL DETAILS - Number of axes : 4 MILLING SPINDLE - Tool holder type : BT50 - Spindle power : 45 [kW] - Spindle speeds : 12000 [rpm] LINEAR AXES - Travels on X/Y/Z axes : 1700/1400/1240 [mm] Itsdpfsw D Hwwjx Aacjn - Rapid traverses rates (X/Y/Z) : 48 [m/min] - Cutting feed rates (X/Y/Z) : 20 [m/min] B ROTARY AXIS - Travel : 360 [°] - Indexing precision : 0.001 [°] TOOL CHANGER - Auto. Tool Changer type : Bras chargeur - Tool magazine capacity : 60 - Tool exchange time : 6 [sec] PALLET CHANGER - Pallet changing device type : Rotopalette - Pallet size : 1250/1250 [mm] - Pallets number : 2 - Maximum weight upon pallet : 3000 [kg] - Distance table center / spindle nose (min./max.) : 70-1470 [mm] - Maximum workpiece diameter : 1970 [mm] POWER SUPPLY - Supply voltage : 400 [V] WEIGHT & DIMENSIONS - Machine weight : 32500 [kg] MACHINE HOURS - Number of hours under power : 34422 [h] EQUIPMENT - CNC : Fanuc 31i-model B5 Interface : Ethernet / RS232 / USB / PCMCIA - Electronic handwheel - Rigid tapping - 3 colors status lamp - Coolant tank * with high-pressure pump : 70 [bars] * Coolant through spindle * with paper filtering unit * with cooling unit for coolant * With cabin washing - Chips conveyor - Tool probe - Workpiece probe : Renishaw RMP60 - Electric transformer