Used High Pressure Air for sale (50,773)

Condition: ready for operation (used), A high-pressure pump BFT with Rexroth and VEM components is available. Pressure: approx. 4000bar, motor power: approx. 37kW. An on-site inspection is possible. Kfedpfxjxxa T Es Aa Eja

Condition: used, Hydraulic machine vice, high-pressure clamp ARNOLD / FRESMAK Jaw width: 160 mm Jaw height: 50 mm Clamping force: 5 tons Clamping range: 0 to 305 mm Maximum opening: 308 mm Guideway height: 112 mm - 2 clamping ranges adjustable via locking pin, 0 to 158 and 148 to 308 mm - with rotary plate Kedpfexp R E Tsx Aa Esfa Dimensions (L x W x H): 580 x 325 x 165 mm Own weight: 65 kg Good condition

Condition: good (used), water pressure: 1,500 bar, Aquablast DUO surface cleaner. Clean, demolish, and strip surfaces with high-pressure water. Kfedpfxev S Ep Ae Aa Esa Clean, strip, remove, demolish, and roughen The Aquablast offers numerous applications for every surface. Different results are achieved depending on the pressure and flow rate. Applications range from thorough surface cleaning to targeted removal of solids.

Condition: used, Year of construction: 2017, operating hours: 300 h, functionality: fully functional, total width: 2,160 mm, total length: 1,350 mm, total height: 1,700 mm, pressure: 2,500 bar, operating pressure: 2,500 bar, fuel: diesel, overall weight: 1,850 kg, rotational speed (max.): 1,800 rpm, high-pressure hose length: 20,000 mm, empty load weight: 1,850 kg, fuel tank capacity: 140 l, type of cooling: water, power: 120 kW (163.15 HP), water pressure: 2,500 bar, pump capacity: 25 l/min, Equipment: crane, type plate available, CD160-2500 with 2500 bar and 25 l/min. The pump is powered by a water-cooled 4-cylinder SISU diesel engine. The entire frame is made of hot-dip galvanized steel, ensuring long durability and corrosion resistance. The frame is equipped on all four corners with rubber feet, forklift pockets, and lifting eyes. The machine features a galvanized roof plate with a side mount for the protection and storage of, for example, high-pressure hoses. Similar to but not a Dynajet, Falch, Hammelmann, Kamat, Uraca, Woma, etc. General Specifications: Operating pressure: 2500 bar Flow rate: 25 l/min Max. pump speed: 560 rpm Drive engine: 4-cylinder SISU diesel Drive engine output: 119.3 kW Kfedpfx Aasxufbtj Eja Drive engine speed: 1800 rpm Tank: 140 L Max. fuel consumption: 26 L/h Dimensions and unladen weight (SKID): 2160 mm x 1350 mm x 1700 mm (1850 kg) Standard accessories included.

Condition: good (used), Year of construction: 2011, machine/vehicle number: HD 11009208-2, pressure: 350 bar, overall weight: 890 kg, rotational speed (max.): 1,500 rpm, power: 31 kW (42.15 HP), Equipment: type plate available, Used high pressure pump. Technical specifications: Year of manufacture: 2011 Type: RS716E/350 Kjdpfstuqmgex Aa Esfa Serial number: HD 11009208-2 31 kW 350 bar 1500 1/min 47 l/min With Hammelmann ACM 225S-4/HE 400/690V 66.2/38.4A 50Hz 37kW 1480 1/min Condition: used (see pictures and type plates) Scope of delivery: 1 pump

Year of construction: 2000, condition: excellent (used), Atlas Copco Crepelle high pressure compressor Type: D44 Year of manufacture: 2000 Kodpfxef Hly Se Aa Esfa Operating pressure: 40 bar Power: 220 kW Speed: 839 RPM Compressor can be inspected at any time.

Condition: reconditioned (used), Year of construction: 2017, operating hours: 1,651 h, functionality: fully functional, machine/vehicle number: G393, operating pressure: 500 bar, total length: 1,175 mm, total height: 945 mm, total width: 760 mm, pressure: 500 bar, type of input current: three-phase, empty load weight: 290 kg, input voltage: 400 V, power: 15 kW (20.39 HP), input current: 32 A, noise level: 78 dB, pressure (max.): 500 bar, input frequency: 50 Hz, water pressure: 500 bar, Dear Sir or Madam, For sale is an overhauled Falch WheelJet 15 Electric without accessories. 500 bar 15 l/min Kodpfx Ajxugifsa Esfa 32A plug Best regards, STS-Reinigungstechnik Team

Condition: used, Year of construction: 1986, Technical details: weight: 7,5 kg number of strokes: 2000 Hub / Min Torque: 15 kp dimensions L x W x H: 170x160x130 mm air pressure clamping unit application area operation of vise clamping consists: air pressure motor, impuls mechanism and a control mechanism air pressure supply necessary averaged operation pressure 0,4- 0,6 MPa air pressure consumption 1,1m³/min with 0,5 MPa tightening force: 80kN Kfjdpfxeu Nkk Ro Aa Esa accessories: copy of documentation available 13 pcs available i.D. *

Condition: like new (used), Year of construction: 2020, functionality: fully functional, High pressure fan motor 15kw / 3000 rpm. Maximum 1415Nm3/hr on 138mbar Weight 337kg. Kfedpfx Aajx Htakj Eoa Possible to buy maximum 3 fans- one unused ,other 2 littlebit runned, max 2-3 months.

Condition: excellent (used), Year of construction: 2017, operating hours: 4,000 h, functionality: fully functional, operating pressure: 2,500 bar, Used Falch Trail Jet 125 high-pressure washer with 2500 bar pressure. The unit is in very good technical condition and ready for operation. Included with the device are the following items: - 3 new Falch high-pressure hoses - 3 used Falch high-pressure hoses - 3 control cables for connecting the Falch gun - New Falch 4-nozzle rotary head - Falch gun - 3 lance extensions for the Falch gun Kfedpexzk U Ssfx Aa Eoa - Additional components for the machine: sets of seals, filters, etc. The machine has been serviced at the Falch headquarters and has operated for 5 hours since service. Machine data: Year of manufacture: 2017, power: 129 kW, Deutz engine. The machine allows for adjustable working pressure.

Condition: good (used), Year of construction: 2009, machine/vehicle number: HD 10906347, pressure: 350 bar, overall weight: 850 kg, rotational speed (max.): 1,500 rpm, power: 35 kW (47.59 HP), Equipment: type plate available, Used high pressure pump. Technical specifications: Year of manufacture: 2009 Type: RS716E/350 Serial number: HD 10906347 35 kW 350 bar 1500 1/min 47 l/min With Küenle KDGN 225S4 NV Kjdpfstuqmkjx Aa Esfa 400 / 690V 67.2 / 39A 50Hz 37kW 1475 1/min Condition: used (see pictures and nameplates) Scope of delivery: 1 pump

Condition: repair required (used), Year of construction: 2011, functionality: not functional, machine/vehicle number: 8506, operating pressure: 2,000 bar, Equipment: documentation/manual, 1. Product Overview We are pleased to offer a second-hand MiniDeBEE New Generation of High Pressu Homogenizer, specially suited for cell lysis, particle size reduction, production of nano and micro-emulsion. Perfect mix between laboratory and pilot scale. Scaling up guaranteed. Kfsdpfx Aajxuvm He Esa 2. Technical Specifications Model: MiniDeBEE 2011 - up to 2000 bar Max Flow rate: 200 ml/min Condition: Used for 1.5 years at Cosaic - Currently NOT FUNCTIONAL ; (problem diagnosed with Pion’s support.Cost repair spare parts up to 2500 EUR;

Condition: new, Year of construction: 2024, functionality: fully functional, HIGH-PRESSURE PUMP HT SERVO-JET4000 A well thought-out principle with great effect. HIGH-PRESSURE PUMP HT SERVO-JET4000 Kfjdpfx Aju Hz Tqea Eea A well thought-out principle with great effect. + Up to 40 % energy savings compared to conventional systems, Investment eligible for subsidies + High energy efficiency: servo direct drive, no reactive current, low and and flexible power consumption + Low connected load required: no power consumption when the WSS system is at a standstill of the WSS system, suitable for companies with low energy supply + 3-piston plunger pump: high liter capacity and high efficiency of up to 98 %, replaces 6000 bar technology, long maintenance intervals, simple design, no hydraulic system, no warm-up and start-up phase - ready to start immediately + Permanent pressure control and integrated pulsation damping: Continuous readjustment of the cutting pressure to the set value - no pressure fluctuations, higher cutting speed than with a pressure intensifier in a comparable combination + Lowest noise level of 75 dB: high-quality complete unit with soundproof housing + Can be used universally for all waterjet machines and brands

Condition: used, Mechanical high-pressure machine vice GRESSEL Type MHS 126-3 High-pressure clamp Jaw width: 125 mm Jaw height: 40 mm Opening width: 177 mm Ksdpfx Ajxf U Ahea Eefa Clamping pressure: 2 / 3 / 4 tons Guide rail height: 62 mm - Clamping force adjustable in 3 stages - High-pressure clamp with mechanical power amplifier - Clamping range adjustable in 2 stages - Lateral thread for workpiece stop Dimensions: 440 x 140 x 103 mm Weight: 26 kg Good condition

Condition: new, Year of construction: 2024, operating pressure: 250 bar, total length: 878 mm, high-pressure hose length: 10,000 mm, total height: 702 mm, total width: 538 mm, empty load weight: 57 kg, fuel: super 95, warranty duration: 24 months, We offer for sale the HD 9/25 G Classic petrol-powered high-pressure washer. Kfjdpfx Aex At R Eea Eoa Condition: New Year of manufacture: 2024 Technical specifications: - Pump performance (l/h): 900 - Working pressure (bar): 250 - Maximum pressure (bar): 300 - Water connection: R 3/4″ - Drive type: petrol - Engine type: G390FA - High mobility - Colour: anthracite - Weight with accessories (kg): 56.8 - Dimensions (L x W x H) (mm): 878 x 538 x 702 Scope of delivery: - Standard spray gun - 10 m high-pressure hose - Crankshaft pump with ceramic pistons - Power nozzle - Protection frame - Water filter Features: Independence - No reliance on external power sources. - Compliant with EU STAGE V emission standards. - Convenient manual start. High mobility - Puncture-proof wheels. - Compact and easy to manoeuvre in confined areas. - Fits inside a vehicle. Robust and durable design - Sturdy tubular frame protects the pump from damage. - High-pressure pump equipped with a safety valve and water filter. - Crankshaft pump with ceramic pistons. Accessory storage - Holder for power leads and accessory compartment for easy storage and transport. - Ergonomic handle and convenient hose storage. The HD 9/25 G Classic cold-water high-pressure cleaner, with a working pressure of up to 250 bar, a delivery rate of 900 litres per hour, and a durable crankshaft pump, is designed to handle even the most demanding cleaning tasks. Its high-performance EU STAGE V petrol engine eliminates the need for external power sources. Sturdy tubular steel frame and puncture-proof tyres make it ideal for challenging tasks on construction sites, in industry, municipal areas, or service companies in the construction sector. The ergonomic handle, very compact dimensions, and dedicated accessory holders (e.g., for high-pressure hose and lance) simplify operation and allow for easy transport by vehicle. All major components are easily accessible for servicing and are effectively protected by thermal and safety valves. Please note: The machine does not support suction from alternative water sources.

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, Niebling HPF SAMK400 High Pressure Forming Machine (2022) with EEM module automatic film loading from magazine stack FAM module automatic removal of protective film SSR FIM2-607dr LC pro HPN ultra violet (UV) lacquer curing system with conveyor (2022) Ksdpfjxlgwwex Aa Ejfa Kuka Cybertech 2 series KR 22 R1610-2/SEC robot with controller & 2x tool stands Niebling NST 100 Intelligent Servo Punch (2022) Kist + Escherich Taifun-Clean workpiece cleaning station with Wanderes brush Rotary inspection table with camera, laser station & Keyence scanner stations, Epson placing & take off robots with controllers ESTA Dustomat 16M mobile dust extractor SAR process automation and product magazine storage with RFID traceability

Condition: good (used), Year of construction: 2017, machine/vehicle number: HD 11610556, pressure: 350 bar, overall weight: 850 kg, power: 30 kW (40.79 HP), Equipment: type plate available, Used high-pressure plunger pump with integrated gearbox and special crosshead seal. Designed for low-viscosity media. Main areas of application in industry and services: - Sewer cleaning - Descaling - Industrial high-pressure cleaning - Special applications Technical specifications: Type: KD716-GK Year of construction: 2017 30kW Pressure: 350 bar 1500 1/min 47 l/min With Elektra electric motor 14BG 220-4AA60-Z 225S 400 / 690V 68 / 39.5A 50Hz 37kW 1475 1/min Ksdpjtuqlxefx Aa Eefa Condition: used (see pictures and type plates) Scope of delivery: 1 PUmpe

Year of construction: 1998, condition: good (used), machine/vehicle number: 98.01112.1773, Stationary high pressure pump unit Hammelmann HDP 122 on base frame without engine. Similar but no Kamat, Uraca, Woma. Pump type: HDP 112 Working pressure: 530 bar Delivery rate: 55 l/min. Drive speed: 1500 rpm. Driving power: 55 kW Kedpsgz H Akjfx Aa Eefa without motor, with pressure control valve, with safety valve, with oil cooling system. Dimensions LxWxH: approx. 2000x1000x1400 mm weight: approx. 300 kg year of construction: 1998 Condition: in good used condition.

Condition: good (used), URACA KD716 High Pressure Pump Electric Driven High Pressure Pump 28mm Two speed motor; 450 bar at 84 ltr/min at 1500 rpm Kodpfx Ajd Hnyyja Ejfa 450 bar at 42 ltr/min at 750 rpm

Condition: like new (used), Year of construction: 2025, operating hours: 250 h, functionality: fully functional, pressure: 2,800 bar, overall weight: 3,000 kg, rotational speed (min.): 1,900 rpm, pump capacity: 30 l/min, Equipment: type plate available, HAMMELMANN AQUAJET 144 Year: 09/2025 Kedpfjvgrpxsx Aa Eefa 2800 BAR Manufacturer's warranty Engine: DEUTZ TCD 6.1 ST5, 140 kW Available immediately

Condition: like new (used), Woma 150Z P16 Ksdpfx Asd Hny Aea Esfa 2000 bar at 20 ltr/min at 1800 rpm

Year of construction: 2010, condition: as good as new (ex-display), Woma 1002 P35 High Pressure Pump in New Condition Kedpfsf Dybzex Aa Ejfa 300 bar - 84 ltr/min - 1500 rpm 300 bar - 101 ltr/min - 1800 rpm

Year of construction: 2007, condition: like new (used), machine/vehicle number: A7.01077.0336, Hammelmann Electric Driven High Pressure Unit 950 bar 38 ltr/min 400V 50Hz complete unit in new condition Ksdodt Uyuopfx Aa Esfa without controls and motor starter

Condition: like new (used), High Pressure Pump 260 bar 60 ltr/min at 1500 rpm and 30kW (current configuration) Kfedpfx Aajd Hnius Eea 600 bar 60 ltr/min at 1500 rpm and 66kW 600 bar 90 ltr/min at 2200 rpm and 97kW

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, pressure: 1,000 bar, operating pressure: 1,000 bar, fuel: diesel, water tank capacity: 3,000 l, power: 300 kW (407.89 HP), year of last overhaul: 2025, water pressure: 1,000 bar, pump capacity: 131 l/min, Woma 325Z P30 diesel-driven high-pressure unit 1000 bar 131 l/min Well-functioning machine, ready for immediate use Machine built into a MAN TGA 26.320 6x2 year 2007 Euro 4 only 64,000 km truck is in top condition EXPORT ONLY Kjdjxb Dp Aopfx Aa Eofa