Used Air Humidifier for sale (23,364)

Condition: used, Compressed Air Refrigeration Dryer, KAESER Type TA 5 Serial No. 2143, Item No. 1.7917.2, Year of manufacture 2002 Throughput: 600 liters/min. Operating pressure: max. 16 bar Refrigerant: R134a Rsdjy Ra Dwspfx Aqusu Charge weight: 0.28 kg Compressed air connection thread: 3/4" Power consumption: 250 Watts Power supply: 230 Volts, 50 Hz, 2 Amps - Condensate drain: DN 6 mm Space requirement (L x W x H): 630 x 500 x 780 mm Weight: 70 kg In good condition

Condition: new, ME-LINE - Air-Cooled Dehumidifiers are used for drying air of up to 100% relative humidity (RH) with temperatures from +45 ºC and above. EU-LINE - Air-Cooled Dehumidifiers are used for drying air of up to 100% relative humidity (RH) with temperatures from -30 ºC to +40 ºC. Rust is the adversary of freshly blasted steel; high air humidity combined with low steel temperatures creates ideal circumstances for moisture condensation onto the recently blasted surface. Condensation rust is a major cause of early coating failure. By lowering relative humidity, the Proton dehumidifiers are designed to give the best climatic conditions for blasting. Climate conditions across the world vary considerably from chilly and humid in Western Europe, warm and humid in the Far East, to hot and humid in the Middle East. Various types of technology can be employed in the dehumidification process; certain dehumidification technologies are more successful than others in dealing with specific climatic conditions. Rsdpskw Ukujfx Aquju Each Proton dehumidifier is built to the highest quality standards and comes with regional certification. The heart of the humidifier is a very efficient and robust metal silicate rotor. The rotor contains a vast number of air channels, running parallel to the shaft, which ensures a large internal surface for adsorbing water vapour. The rotor is not affected by over saturation. Therefore, the PROTON dehumidifier’s rotor can resist long time storage at high humidity without loosing capacity. The PROTON dehumidifiers have been developed especially for corrossion protection in connection with sandblasting and painting operations to protect materials and to avoid moisture problems, meeting the following conditions: •Avaliable in sizes from 1.000m³/h to 18.000m³/h dry air. •Avaliable in pre-cooled and after-cooled versions for warm climates. •Robust design with steelframe, eyebolts etc. •Vital parts can easily be maintained and exchanged. •Large air inlet grills and filters. •Can be built into containers for protection. •Adjustable dehumidifying capacity and outlet air temperature in 4Grades. •Outdoor and indoor use. •Dry air pressure up to 1200 Pa. Technical. Spec.: Dehumidifiers differs between 1.000m3/h - 18.000m3/h.PROTON Dehumidifiers decrease the Relative Humidity (RH) from 90% to %10-15. Dehumidifiers are capable to remove 100lt water per hour.

Condition: used, functionality: unexamined, For sale: Air Dryer Type FD 120 3x380/415V; 50Hz Serial no. 302210 Rjdpfx Aqjyutnpjueu Net price: EUR 1,100 negotiable.

Condition: good (used), Year of construction: 2015, Atlas Copco Oil Free Screw Compressor with built-in Air Dryer Model SF2+FF 7.75 bar / 112 PSI Year 2015 400 volts three phase, 2.2 KW / 3 HP, 2885 RPM 8.9 CFM / 4.21 lts/s Very little use Ex Pharma Facility Rodpjy Iplfjfx Aquju

Condition: used, Used hydrogen plant designed to produce high purity hydrogen and carbon monoxide from natural gas. Built by Air Liquide and first operated in 2015, shut down in August 2024. Output capacity as follows: - Hydrogen 60000 Nm3/hour with 99.99% purity. - Carbon monoxide 14500 Nm3/hour with approximately 99% purity. (Actual purity depends on volume of nitrogen in the natural gas feedstock.) - Superheated 40 bar steam by-product. The HyCO plant includes the following (5) main sections: - Syngas generation / steam reforming and steam generation - Gas cooling - CO2 scrubbing Rsdpjy Ryrbefx Aquou - Gas drying and cryogenic dismantling - Pressure swing adsorption (PSA) Also included: sub-systems for provision of operating resources, flare system, process control and safety shutdown system.

Condition: used, suitable for nitrogen all stainless steel belt width ± 600 mm nett belt length ± 6.000 mm dimensions (l x w x h) : ± 7.600 x 1.500 x 2.300 mm product height: max. ± 80 mm Rjdoy Tun Aspfx Aquou

Condition: used, Freshline freezer MP Type IQF 1220.15/3070 suitable for nitrogen all stainless steel product height: max. ± 100 mm capacity: ± 5.000 kg / h product load (kg/running meter): ± 13-14 kg / running meter 400/460V, 50/60Hz, 3PH+PE, 110A, 32kW Pneumatic: 1Nm3/h at 5-7barg LIN pressure nitrogen 3barg Rodoy Nkd Espfx Aquou net belt width ± 1.220 mm net belt length ± 16.800 mm dimensions (l x w x h) : ± 17.700 x 2.600 x 2.600 mm (max open) in very good condition

Condition: used, Year of construction: 2018, Colour: Grey Empty weight: 400 kg Dimensions (LxBxH): 160 x 130 x 130 cm - Details: - └ Description: Includes tank and dryer - Year: 2018 - Documentation available: No - CE certificate present: No - Transport dimensions: 1600mm x 1300mm x 1300mm (l x w x h) - Transport weight [kg]: 400kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Redpsyuga Esfx Aquju Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 1991, Technical details: feed pressure: 10 bar volume capacity: 4,05 m³/min liter capacity: 4050 l/min Number of working hours: 16160 h total power requirement: 30 kw weight of the machine ca.: 0,67 t space requirements of the machine approx.: 2,2x0,9x1,65 m compressor: ECOAIR Type 4050.6210.2 operational pressure 15bar * Redpfx Aqju Nz Dnsusu

Condition: excellent (used), Year of construction: 2025, functionality: fully functional, COMPLETE PACKAGE: Mobile, transportable compressed air supply station – the entire system is installed in a red steel container (10 ft) and can be transported as a single unit using a crane. Simply connect the three-phase power supply and compressed air line – and it’s ready to go. The interior features a HIGH-QUALITY INDUSTRIAL SYSTEM manufactured in 2025: - SCC screw compressor with frequency inverter (speed-controlled, energy-efficient) - 2000-liter pressure vessel VIG (stands upright, protrudes through the container roof with a weather protection cover) - Complete control system with touch panel and emergency stop button on the outside - Acoustic sound insulation (black foam mats inside) - Permanently installed electric heater in the container (frost protection for year-round operation) - Hose material and compressed air connections for consumers - Crane lifting points on the container roof - Control panel with touch display, emergency stop, status LEDs Originally from the shipyard operations of Strela Shiprepair GmbH. System freshly painted, clean, and ready for use. Assumption of the maintenance contract with Schulze is possible. TECHNICAL DATA: Rjdpfezav Ddjx Aqueu SCREW COMPRESSOR: - Manufacturer: SCC Air Compressors - Control: SCC frequency inverter (speed-controlled) - Type: Screw compressor, stationary in the container - Year of manufacture: 2025, commissioning date: 23.05.2025 - Operating time: approx. 1 year in shipyard operations PRESSURE VESSEL: - Manufacturer: VIG GmbH, Kreuztal - Volume: 2,000 liters - Max. pressure: 11 bar - Test pressure: 15.73 bar - Temperature: -10°C to +50°C - Standard: AD 2000, test mark 1003 - Factory No.: 124585, year of manufacture 2025 CONTAINER: - 10-foot steel container, soundproofed, painted red - External dimensions: approx. 2,991 x 2,438 x 2,591 mm - Crane lifting points on the roof (photo attached showing the shipyard crane) - Three-phase power connection 400 V CEE IDEAL FOR: - Shipyards and shipbuilding companies (mobile compressed air supply for ships) - Sandblasting service providers (mobile complete solution) - Industrial companies with changing locations - Automotive/body shops with an external location - Construction companies, scaffolding companies PICKUP: Loading with the shipyard crane directly on-site (container has lifting points on the roof). Transport by low-bed trailer via a forwarding agency. Inspection appointments are available at any time – we will then show you the complete documentation and demonstrate the system in operation.

Condition: used, Year of construction: 1991, operating hours: 530 h, functionality: fully functional, overall weight: 1,200 kg, motor manufacturer: Deutz, power: 42 kW (57.10 HP), fuel tank capacity: 31 l, pressure (max.): 12 bar, IR-Ecoair F58 construction compressor Year of manufacture: 1991 530 operating hours 42 kW, 4-cylinder Deutz engine, model F4L 1011 Approx. 1,200 kg Redpfx Aqozazi Ssuju 12 bar 3,000 rpm

Condition: good (used), functionality: fully functional, SafeFAST Elite 212D flow cabinet with stand Manufacturer: Faster-Air Model: SafeFAST Elite 212 D “Technical data sheet” from the manufacturer: Useful dimensions (mm): WxDxH: 1192x580x740 Rsdpfx Aqov Dhynousu Overall dimensions (m): WxDxH: 1350x855x1545 Noise level (dbA): -54 Working aperture (mm): 200 Exhaust flow rate (m3/h): 390 Lighting level (lux): 1200+ Weight (kg): 195 Electrical data: 230 V – 50 Hz

Condition: good (used), Code: 0386 Brand: BOTTARINI AIR KRONE - ITALY Redpfxey Spkis Aquou Model: KS 22 - CE Standard Silenced screw air-compressor with tank and dryer for craft and industry - CE Standard Features: Palletised design, this means that it can be placed anywhere using a simple transpallet. No bolting down is required. Panel-enclosed design that allows for easy access from all sides for routine maintenance Clearly visible and functional control panel features a pressure gauge, air pressure, running time counter, a digital temperature regulator, and a timer. Light on/off button and fault indicator lights Technical data: Motor power 20 Hp 10 Bar 2 m³/min Air delivery 70 CFM Vertical tank 500 liters Dryer Overall dimensions Compressor mm 700 x 700 x 1000 h - 210 kg Overall dimensions Dryer mm 500 x 500 x 600 h - Kg 50

Condition: excellent (used), Year of construction: 2008, Air Plants 'CEF 3 - 7.5Kw' Single bin dust extraction / Filter unit. UK £1950 + VAT. This unit has been used for fine dust only and has had little use over the years. In excellent condition and immediately available. Rodjyvvdqepfx Aqueu

Condition: good (used), Year of construction: 2002, For sale are 3 units of electrostatic industrial filters from the brand Air-Fresh-Service, model F-V10. Voltage/Frequency: 230V/50Hz Current: 1.0 A Power: 0.22 kW Transport and loading can be organized across Europe at an additional cost if required. Prices are exclusive of VAT. Viewing is possible by appointment. Please contact us; our team will be pleased to assist you further. Machinery Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, MACHINE TOOLS, AND MORE. Rsdpfx Aqjy H H Dvjusu Are you looking for a high-quality yet affordable machine for your production? Or do you want to sell yours? For further information or to get in touch, please use the contact form.

Condition: new, Year of construction: 2025, functionality: fully functional, overall weight: 130 kg, total length: 1,100 mm, total width: 450 mm, fuel type: electric, volume flow: 60 m³/h, operating pressure: 10 bar, pressure (min.): 6 bar, pressure (max.): 10 bar, noise level: 65 dB, protection type (IP code): IP23, type of cooling: air, Equipment: refrigerant dryer, VIBER-AIR INV7.5-500 – INDUSTRIAL SCREW COMPRESSOR WITH INVERTER AND INTEGRATED DRYER Professional screw compressor designed for continuous industrial use, ideal for carpentry shops, workshops, production facilities, CNC machines, and use with pneumatic tools. The inverter technology enables automatic adjustment of the motor speed based on the actual air consumption, reducing energy consumption, mechanical wear, and noise. The integrated dryer ensures cleaner and drier compressed air, improving the reliability of the system and the lifespan of the connected pneumatic equipment. Rodpfxoy Uk Afj Aquju MAIN FEATURES: • Industrial screw compressor • 7.5 kW motor • 500-liter tank • 400V power supply • Integrated inverter for energy saving • Integrated dryer • Direct drive • Low noise level • Electronic control • Reduced maintenance • High operational reliability Ideal for: • Carpentry shops • CNC plants • Mechanical workshops • Manufacturing companies • Continuous professional use

Year of construction: 1988, condition: used, Compressor unit type 178 A CD E Delivery volume 4760 l min 9 bar operating pressure Rodpsgw Dqpefx Aqusu KW 30

Year of construction: 1990, condition: used, machine/vehicle number: 226794, Air Output: (8 bar) 2,05 m³/min Rodpfxe E E Awo Aqusu Pressure: 8 bar Motor: 15 kW

Condition: not inspected (used), Pouch making machine for liquids, hot or cold fill. Ideal for packing Soups, Sauces, Condiments (Ketchup, Mustard, Mayonnaise), Salad Dressing, Tomato Based Products (Pizza Sauce, Spaghetti Sauce), Liquid Eggs. We have two identical machines here from the same sauce factory. Many other machines including kettles, sauce coolers, glycol chillers etc. Rodpfx Asig Ht Iequju

Condition: used, This listing is for an Air Liquide TR11 nitrogen Vessel. Redpfsxx Aw Hsx Aquou The unit is in full working condition and is ready for immediate release. Range of non-pressurised vessels used to store and transport liquid nitrogen. Light alloy construction with composite material neck

Condition: used, This listing is for a Jun-Air OF302 Application Oil-free compressor 25 liter pressure vessel mounted on frames incl. 5 micron filter regulator with auto-emptied water several withdrawal options for compressed air adjustable rubber mounts flexible applications can also be used for retrofitting existing systems Rodpfxsxzg Rvo Aquou horizontal mounting manner possible ideal for installation in OEM applications 2-frequency driving motor Technical Data Suction - 108 l / min Delivery performance - 38 l / min at 8 bar Volume - 65 dB (A) Cylinder per compressor - 2 Pressure container volume - 25 l Permissible ambient temperature - + 1 ° C to + 40 ° C Supply voltage - 230 V, 50 Hz Engine Power - 0.44 kW Current consumption - 4.1A Thermal protection - Integrated Duty - 100% Weight - 28 kg Dimensions (LxWxH) - 380 x 380 x 610 mm

Condition: used, This listing is for a Jun-Air 6-J mini Air Compressor Redpoxzg Sasfx Aquou Used Jun-Air 6-J mini air compressor providing quiet, oil-free compressed air for laboratory instruments and analytical equipment

Condition: as good as new (ex-display), Year of construction: 2022, 1.0 ft. Ultrasonic Cleaning Device Manufacturer: AIR FRESH SERVICE INDUSTRIEFILTER Type: 1-Chamber Cleaning System Inner Tank: 750 x 600 x 770 mm Rjdpfsv Nztxex Aquou Year of Manufacture: 2022 THIS DEVICE HAS NEVER BEEN USED.

Year of construction: 2020, condition: excellent (used), Weber Legi-Air 4050E CC (Gen.3) – automatic print and apply labeling system with support frame For sale: Weber Legi-Air 4050E CC (Gen.3) – a professional industrial print and apply labeling system designed for automatic product labeling in production lines. Manufactured by Weber Marking Systems, this unit is designed for continuous operation in demanding industrial environments. The machine provides highly precise and efficient label printing and application, making it ideal for packaging and product identification processes. Technical data: Manufacturer: Weber Marking Systems GmbH Model: Legi-Air 4050E CC (Gen.3) Year of manufacture: 2020 Print resolution: 203 / 300 / 600 dpi Maximum print speed: up to 400 mm/s Capacity: up to 240 labels/min Application accuracy: ±0.8 mm Minimum label size: 10 x 5 mm Maximum label size: 160 x 350 mm Maximum applicator arm reach: 400 mm Power supply: 100–240 V AC / 50–60 Hz Power consumption: 700 W Operating pressure: 6 bar Air consumption: 0.1 – 3 l / cycle Additional information: sturdy support frame included, height adjustment on the legs and on the support column, maximum labeling head height on the support frame: approx. 140 cm from the floor, can operate in four directions: left / right / up / down. Redpfx Ajy Ickboqueu TAG: industrial labeler, labeling system, label printer, print and apply system, Weber Legi-Air, Weber Marking Systems, Avery Dennison labeler, Zebra label printer, Sato labeling machine, Novexx labeling system, Videojet label applicator, Domino print and apply, automatic label applicator, carton labeling machine, production line labeler, industrial labeling machine, packaging label applicator, automatic print and apply, product labeling system, industrial label applicator

Condition: good (used), Year of construction: 2015, We offer you: Foam cushion packaging machine Rsdpfx Aqew Ra Ihjueu Manufacturer: Sealed Air Model: Instapak 901 Year of manufacture: 2015 Accessories, depicted tools, and clamping devices are only included in the scope of delivery if specified in the additional information. Subject to changes and errors in technical data and details, as well as prior sale!