Used Haas Vf 2 Ss for sale (251)

Condition: ready for operation (used), Year of construction: 2020, travel distance X-axis: 762 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 508 mm, controller manufacturer: HAAS, spindle speed (max.): 12,000 rpm, spindle motor power: 22,400 W, This 5-axis HAAS VF 2 SS YT vertical machining center was manufactured in 2020. Ideal for precision machining, it offers robust construction and advanced control technology. If you are looking to get high-quality milling capabilities, consider the HAAS VF 2 SS YT machine we have for sale. Contact us for more information. Additional equipment • Type: Side-Mount (SMTC)/ Capacity: 30+1/ Max Tool Diameter (full): 64 mm/ Max Tool Diameter (adjacent empty): 127 mm/ Max Tool Length: 279 mm /Max Tool Weight: 5.0 kg • Tool-to-Tool (avg): 1.80 s/ Chip-to-Chip (avg): 2.40 s • Included: HRT210 Machine Benefits Technical Machine Benefits • Torque: 122 nm at 2000 rpm • Drive system: inline direct-drive Ffedoyaix Uepfx Afnsu • Taper: bt40 / ct40 / hsk-a63 • Lubrication: air/oil injection/cooling: liquid-cooled • Max cutting feedrate: 21. 2 m/min / rapids on x, y, z-axis: 35. 6 m/min • Coolant tank capacity: 208 l / through-spindle coolant pressure: 21 bar / through-tool air blast: yes / chip auger: yes / chip tray filter kit: yes / window air blast: yes / coolant pump: multi-stage • Air consumption: 113 l/min at 6. 9 bar / minimum air pressure: 5. 5 bar / air hose connection: 3/8 in • Standard interface: ethernet and wifi / control memory: 1 gb / remote monitoring: haasconnect / high-speed machining: included / advanced tool management: included /media display (m130): included / power failure detection: included /safe run function: included / rigid tapping: included

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, travel distance X-axis: 762 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 508 mm, table load: 680 kg, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Travel X-axis: 762 mm Travel Y-axis: 406 mm Travel Z-axis: 508 mm Table length: 914 mm Table width: 356 mm Table load capacity: max. 680 kg Spindle speed: 12,000 rpm Feed Rapid traverse X-axis: max. 35.6 m/min Rapid traverse Y-axis: max. 35.6 m/min Rapid traverse Z-axis: max. 35.6 m/min Ffedpfx Aox Up Dhsfnou Tool Changer Capacity: 24+1 Tool holder: CAT 40 Max. tool diameter: 76 mm Tool change time: 1.6 s Chip-to-chip time: 2.2 s MACHINE DETAILS Machine weight: 3,629 kg

Condition: used, Year of construction: 2006, travel distance X-axis: 762 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 508 mm, controller manufacturer: Haas, total height: 2,750 mm, total length: 2,250 mm, total width: 2,360 mm, table width: 914 mm, table length: 356 mm, table load: 680 kg, spindle speed (max.): 12,000 rpm, Equipment: documentation/manual, CNC Vertical Machining Centre CNC Control Haas CNC Ffsdpjydn E Isfx Afneu Table size 914 x 356 mm Table load 680 kg Number of pallets: 1 x Movement X-axis 762 mm Movement Y-axis 406 mm Movement Z-axis 508 mm Spindle taper DIN 68971A Spindle speed 12.000 1/min Spindle motor 22,4kW Magazin capacity 24 + 1 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: good (used), Year of construction: 2007, travel distance X-axis: 762 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 508 mm, Machine: Haas VF-2SS with HRT160 Year of manufacture: 2007 Condition: Used, inspected, fully functional Technical specifications: Spindle: max. 12,000 rpm, 22.4 kW power, standard SK40 taper Travel: X: 762 mm Y: 406 mm Z: 508 mm Table: 914 x 406 mm, T-slots Rotary table: HRT160, 4th axis, integrated for simultaneous machining Tool changer: 24 stations CNC control: Haas Classic Control Coolant system included Special features: HRT160 enables 4-axis machining for complex workpieces Machine can be inspected under power by appointment in Burbach. We provide loading assistance. Buyer is responsible for transport. Ffodpfxjyg Iixo Afnou Technical data, accessories and description of the machine are non-binding.

Condition: ready for operation (used), Year of construction: 2022, controller manufacturer: HAAS, spindle speed (max.): 12,000 rpm, This 3-axis HAAS VF-2SSYT with Pallet Pool 3+1 was manufactured in 2022. It features a 30 hp, 22.4 kW in-line spindle, capable of 12,000 rpm, and a 50+1 tool changer. It includes a 15" screen and a 3+1 pallet pool with 900x450 mm pallets. If you are looking to get high-quality milling capabilities, consider the HAAS VF-2SSYT machine we have for sale. Contact us for more information. Machine Benefits Technical Machine Benefits • Tool changer: 50+1 tool changer • Extra coolant: 360 liters • Pallet pool: 3+1 pallet pool with 900x450 pallets • 21 bar trough spindle Ffedpfxox Hblue Afnsu • 15" screen Extra Information Machine still under power

Condition: excellent (used), Year of construction: 2019, Traverses X Y Z: 762 x 406 x 508mm, Table 915 x 355mm, Spindle speed 0 - 12000rpm, Ffedpfx Ajx Dk Evjfneu Spindle taper BT40, Spindle Motor 40Hp, HAAS Control, 30 Station ATC, coolant

Condition: used, Year of construction: 2016, x-travel 762 mm y-travel 406 mm z-travel 508 mm Ffsdpfx Afsyb S Injnsu control Haas

Condition: like new (used), Year of construction: 2024, Traverses X Y Z: 762 x 508x 508, Table 914 x 457mm, Spindle speed 0 – 12,000rpm, Spindle taper BT40, Spindle Motor 22Kw, HAAS Control, 30 Station ATC, through spindle Coolant , Low Volt light, swarf auger, spindle probe, tool setter Fodpsv Tah Asfx Afnsfu

Condition: used, Year of construction: 2005, Technical details: x-travel: 750 mm y-travel: 406 mm z-travel: 508 mm weight of the machine ca.: 4 t bore spindle turning speed range: 12.000 U/min HAAS VF-2 is a 3-axis machining center designed for precision, high accuracy and reliability. Fodpox Iwr Tefx Afnefu *

Condition: good (used), Year of construction: 2011, functionality: fully functional, The machine is in good technical condition, testing can be arranged by prior agreement. Ffjdpfx Afeyg R S Neneu

Condition: excellent (used), Year of construction: 2007, Haas VF-2SS vertical machining center Year: 2007 CNC Control Haas CNC Table size 914 x 356 mm Table load 680 kg Movement X-axis 762 mm Movement Y-axis 406 mm Movement Z-axis 508 mm Spindle taper SK40 Spindle speed 12000 rpm Spindle motor 22,4kW Fedpoygiptofx Afnofu Tool magazin capacity 24 + 1 Accessories/options: - swarf spiral - through spindle coolant - 4.axis rotary table, HRT210 - Renishaw system

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, CNC HASS VF-2SS 2011 Fjdpfsyh Rwxsx Afnefu

Condition: ready for operation (used), Year of construction: 2018, General Data Machine weight 3700 kg Measurements height 2800 mm Main Drive Spindle Speed 12000 RPM Spindle motor power 22.4 kW Tool taper BT 40 Number of axis 4 Dimensions Machine Length 2700 mm Table Table load 680 kg Movement X-Axis Movement 762 mm Z-Axis Movement 508 mm Ffjdox D D N Iepfx Afnou Y-Axis Movement 406 mm Tools Max weight 5 kg This 4-axis HAAS VF-2SS-EU vertical machining center was manufactured in 2018. It features a 762 mm X-axis travel, 406 mm Y-axis travel, and 508 mm Z-axis travel. Equipped with a BT-40 spindle achieving up to 12,000 rpm and a side-mount tool changer with a 30 + 1 tool capacity. Rapid traverse rates reach 35.6 m/min. Consider the opportunity to buy this HAAS VF-2SS-EU vertical machining center. Contact us for more information about this machine. Application Types Milling

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 1101742, travel distance X-axis: 762 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 508 mm, table width: 900 mm, table length: 400 mm, Machine recovered from the insolvency of an automotive supplier - machines are currently still in operation! TECHNICAL DETAILS X-axis travel: 762 mm Y-axis travel: 406 mm Z-axis travel: 508 mm Table dimensions: approx. 900 x 400 mm EQUIPMENT Tool changer Further information according to manufacturer - without guarantee Spindle speed: 12,000 rpm Tool taper: CT 40 Ffedpfxev Naw Nj Afnju Table load: max. 680 kg Tool diameter: 76 mm Tool slots: 24+1 Machine dimensions: approx. 3.2 x 2.8 x 2.7 m Weight: approx. 3.7 t

Condition: repair required (used), Year of construction: 2013, functionality: not functional, machine/vehicle number: 1106086, travel distance X-axis: 762 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 508 mm, table width: 356 mm, table length: 914 mm, The machine's tool changer is defective. The repair costs for this are approximately €8,000 - €10,000. The axis wear corresponds to the typical wear for a machine of this year of manufacture. TECHNICAL DETAILS Travel Paths X-axis travel: 762 mm Y-axis travel: 406 mm Z-axis travel: 508 mm Fjdpfxow Axkys Afnofu Table Length: 914 mm Width: 356 mm Max. table load: 680 kg Spindle Spindle taper: SK-40 Spindle drive: 22.4 kW Speed: 12,000 rpm Tool Changer Tool changer: 24+1 magazine positions Feed Rates Rapid traverse: 35.6 m/min MACHINE DETAILS Electrical Data Voltage: 360–480 V Phases: 3 Frequency: 50/60 Hz Full load current: 40 A Maximum load: 70 A Short-circuit interrupting capacity: 10,000 A Short-circuit current: 5,000 A RMS symmetric Operating Dimensions Max. operating height: 2,667 mm Max. operating width: 3,175 mm Max. operating depth: 2,769 mm EQUIPMENT Key switch for program lock Synchronized thread tapping 208-liter coolant system with continuous coolant supply 15" color LCD monitor with USB port

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 40164, controller manufacturer: HAAS/FANUC, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 24, TECHNICAL DETAILS Fodpfx Aoxuih Rofnefu Spindle speed: 12,000 rpm MACHINE DETAILS Control: HAAS/FANUC Electrical data Voltage: 360/480 V Phases: 3 Frequency: 50/60 Hz Full load: 40 A Maximum load: 70 A EQUIPMENT 24-position tool changer BT40 Belt filter system / high-pressure pump KNOLL KF 150

Condition: ready for operation (used), Year of construction: 2008, operating hours: 5,557 h, travel distance X-axis: 706 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 508 mm, controller manufacturer: HAAS, table width: 914 mm, table length: 356 mm, table load: 1,361 kg, spindle speed (max.): 8,100 rpm, number of axes: 3, This HAAS VF-2, manufactured in 2008, offers strong machining capability with 706 mm of X-axis travel, 406 mm on the Y-axis, and 508 mm on the Z-axis. Equipped with a spindle speed of 8100 rpm and a powerful 22.4 kW spindle motor, it is well suited for demanding milling applications. The visual and technical condition of the machine is very good for its age. Contact us for more information. • Table: 356 x 914 mm • Tool magazine capacity: 20 tools Fedox D Hpkopfx Afnsfu Additional equipment • Chip conveyor • Documentation / operating manual

Condition: good (used), Year of construction: 2017, Traverses X Y Z: 762 x 406 x 508, Table 914 x 356, Spindle speed 0 - 7500rpm, Spindle taper BT40, Spindle Motor 20Hp HAAS Control, Ffsdpfex Dk Epjx Afneu 20 Station ATC, Programmable Coolant nozzle, Low Volt light, swarf auger

Condition: good (used), Year of construction: 2014, Haas VF 2, Fjdpjyftuqjfx Afnofu Year of manufacture: 2014, Control: Haas, Travel X/Y/Z: 762/406/508 mm, Tool changer: 24 stations, Spindle taper: ISO 40, Spindle speed up to 15,000 rpm, 3D measuring probe, Zero-point clamping system, Vacuum unit,

Condition: excellent (used), Year of construction: 2017, operating hours: 3,200 h, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, Equipment: documentation/manual, Top CNC Machining Center HAAS VF-2 – 5-Axis – with Loading Robot – Year 2017 For sale: CNC machining center HAAS VF-2 - Excellent condition - 5-axis configuration - Includes automatic loading robot - 3200 operating hours. Highlights: - Haas 2-axis rotary table - HANS loading robot Fjdpoyfg Eiefx Afnefu - Tool breakage control and tool measurement by Renishaw - Renishaw OMP40 zero-point probe Model: VF-2 5-axis machining Loading robot for automated production Robust and reliable industrial quality User-friendly HAAS control

Condition: good (used), Year of construction: 2017, operating hours: 3,200 h, functionality: fully functional, number of axes: 5, CNC Milling Machine HAAS VF-2 – 5-Axis – with Loading Robot – Year of manufacture 2017 For sale is a HAAS VF-2 CNC milling machine with 5-axis configuration, including an automatic loading robot, manufactured in 2017, with 3,200 operating hours. The machine is in good, well-maintained condition and has been in regular use. It is ideally suited for precise milling operations, series production, and automated machining. Features / Highlights: - 2-axis rotary table from Haas - Loading robot from HANS - Tool breakage detection and tool measurement from Renishaw - Renishaw OMP40 probe - Video of robot loading available via WhatsApp upon request Manufacturer: HAAS Model: VF-2 5-axis machining Loading robot for automated production Robust and reliable industrial quality User-friendly HAAS control system Regularly serviced Condition: Good condition, fully functional Fodsx Svz Ijpfx Afnsfu Year of manufacture: 2017 Inspection possible by appointment. Further technical details, accessories, and documentation available on request. Price: 49,000.— Location: Austria, Vorarlberg, Höchst

Condition: ready for operation (used), Year of construction: 2015, operating hours: 7,100 h, functionality: fully functional, travel distance X-axis: 1,270 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, spindle speed (max.): 12,000 rpm, table load: 794 kg, TECHNICAL DETAILS Travel X: 1,270 mm Travel Y: 508 mm Travel Z: 635 mm Rapid traverse speed X/Y/Z: 35.6 m/min Distance spindle nose to table max.: 742 mm Distance spindle nose to table min.: 107 mm Max. spindle speed: 12,000 rpm Spindle drive power: 22.4 kW Ffjdpfxsxtbtie Afnju Table dimensions: 1,321 x 495 mm Max. table load: 794 kg Tool changer positions: 24+1 Max. tool weight: 5.4 kg Tool change time: 1.8 s MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): approx. 3,000 x 2,500 x 2,600 mm Weight: approx. 6,800 kg Cycle start time: approx. 10,100 h Feed time: approx. 7,100 h EQUIPMENT Haas control with synchronous tapping Wireless probing system Coolant system with programmable coolant nozzle Spiral chip conveyor

Condition: excellent (used), Year of construction: 2019, operating hours: 4,101 h, functionality: fully functional, machine/vehicle number: 1159962, Equipment: chip conveyor, HAAS VF 5 SS VERTICAL MACHINING CENTRE YEAR 2019 SPINDLE SPRRED 12,000 RPM TRAVELS - X AXIS - 1270 MM Y AXIS - 660 MM Z AXIS - 635 MM TABLE SIZE 1321 X 584 MM THROUGH SPINDLE COOLANT HIGH SPEED MACHINING 40 TAPER Fodpfx Ajw N Nw Aofnofu RIGIT TAP 30 ATC 4TH AXIS ENABLED SWARF AUGER HOURS IS ON THE PHOTOS

Condition: ready for operation (used), Year of construction: 2017, spindle speed (max.): 5,000 rpm, travel distance X-axis: 213 mm, travel distance Z-axis: 572 mm, spindle motor power: 22,400 W, total height: 1,956 mm, total width: 2,921 mm, overall weight: 4,000 kg, product length (max.): 4,191 mm, number of axes: 2, This horizontal turning machine was manufactured in 2017. The HAAS ST 20 SS features a maximum turning diameter of 330 mm and a turning length of 572 mm. It includes a hybrid VDI/BOT tool turret with 24 positions and a maximum spindle speed of 5,000 rpm. If you are looking to get high-quality turning capabilities, consider the HAAS ST 20 SS machine we have for sale. Contact us for further details. • Machining capacity: • Maximum turning diameter: 330 mm • Maximum turning length: 572 mm • Spindle bar capacity: 51 mm • Axes: • Rapid feed X-axis: 24 m/min • Rapid feed Z-axis: 24 m/min • Spindle: • Spindle nose: ASA 6 • Chuck size: 210 mm • Tooling: • Tool turret: Hybrid VDI/BOT – 24 positions Fedpfoyifcrsx Afnsfu • General: • Coolant tank capacity: 208 L

Condition: used, Year of construction: 2017, x-travel 1016 mm y-travel 660 mm Ffjdsyhrbnopfx Afnju z-travel 635 mm