150-300 bar 30-75 lpm high-pressure cleaner

PTC Salmon

Year of construction: 2022, condition: as good as new (ex-display), High pressure cleaning unit, high pressure flushing unit, high pressure built-in flushing unit on hot galvanized and painted high quality steel frame with forklift lugs suitable for installation in company vehicles. PTC Salmon similar but no Feierabend & Fock, Karo, Leistikow, Müller, Rioned, Rockstroh, Rom, Rowo,... The following models are available: Salmon 60/150 | 60l/min. at 150bar | Engine: Kohler 19kW Salmon 45/200 | 45l/min. at 200bar | Motor: Kohler 19kW Salmon 35/250 | 35l/min. at 250bar | Motor: Kohler 19kW Salmon 30/300 | 30l/min. at 300bar | Motor: Kohler 19kW DIMENSIONS / WEIGHT: Dimensions without water tank LxWxH: approx. 760x1.250x1.200 mm. dimensions with 400l water tank LxWxH: ca. 1.220x1.250x1.200 mm Dimensions with 800l water tank LxWxH: approx. 1.670x1.250x1.200 mm Empty weight without water tank: approx. 370 kg Empty weight with 400l water tank: approx. 400 kg Empty weight with 800l water tank: approx. 430 kg HIGH PRESSURE PUMP: - Manufacturer: HPP - Model: CLW - Flow rate: 30 - 60 l/min. - Working pressure: 150 - 300 bar MOTOR: - Manufacturer: Kohler - Model: KDW 1003 - Fuel: Diesel - Max power: 26 hp (19 kW) CONTROL PANEL: - Start button - Operating hours counter - Electronic fuel gauge - LED indicators for oil temperature, low lubrication oil pressure, clogged air filter, RPM, alternator and spark plugs - Emergency stop button ELECTRICAL OPERATION: - On / off hydraulic hose reel; - On / Off bypass; - Speed control +/-; - Emergency stop button; - Switching to radio remote control; INSTALLED ALARM: - Low water protection against dry running of the high pressure pump with automatic shutdown function. SAFETY AND PRESSURE REGULATING VALVES: - The unit is equipped with a safety valve, a pressure regulating valve and a pressure gauge. HIGH PRESSURE HOSE REEL: - Type: electric hose reel - Material: stainless steel - Capacity: max. 80 m ½" u. 80 m 3/8" high pressure hose. - Hose: 80 m ½" high pressure hose (included) - Hose guide: manual LOW PRESSURE WATER SUPPLY HOSE REEL: - Type: manual hose reel - Material: stainless steel - Capacity: max. 35 m ¾" low pressure hose - Hose: 35 m ¾" low pressure hose (included). WATER FILTER: - With washable cartridge and drain valve . - Filtration degree: 50 mesh INCLUDED: - Multifunction radio remote control IMET; - On / Off motor; - On / Off Bypass; - Speed control +/-; - Winding / unwinding hydraulic hose reel; - Emergency stop button; - Battery charger for radio remote control; - 400 or 800 l (with steel frame) polyethylene water tank; OPTIONAL ON REQUEST: - Pulsation/booster pump; - 50 or 60 m ½" high pressure hose; - 50, 60 or 80 m 3/8" high pressure hose with G3/4" connection; ACCESSORIES ON REQUEST: - Kit STORZ for connection to the water hydrant; - Kit UNI 45 ; Dcodpfx Aoiky H Sjfnec - Version with 2 HD reels; - Mobile hot water generator 10 kW - 12 VDC; - Kit high pressure spray gun, swivel and quick coupling; - Kit high pressure lance with flat jet nozzle 15° / rotating nozzle; - Kit lance for high flow; - Kit rotary nozzles; - Kit double head nozzles; - Kit water sand lance; - Kit detergent dispenser; - Step cleaner; - Surface cleaner; - Sludge suction device (Venturi); - Pipe cleaning nozzles; Other accessories on request

Condition: used, mileage: 229,812 km, power: 335 kW (455.47 HP), first registration: 03/2009, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 12/2023, color: white, gearing type: semi-automatic, emission class: euro5, total width: 2,550 mm, total height: 3,890 mm, loading space volume: 14 m³, Equipment: ABS, air conditioning, ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ BUY ++ Mercedes Actros 3346 K 6x4 Wiedemann Super 2000 8.0/6.0/2.0, water reclaimer superstructure * Wiedemann enviro tec * Super 2000 8.0/6.0/2.0, water recycling * 14,000 liter tank size * 2,000 liters of fresh water * 6,000 liters of rinsing water * 8,000 liters sludge volume * Emptying by tilting the tank 45° Vacuum system * Wiedemann & Reichhardt KW 3000 * approx. 3,000cbm/h * approx. 25m suction hose DN 125 * Suction pipe DN 125 w. Duct folder High pressure system * URACA P3-45 G 65 approx. 406l/min at 175bar * approx. 200m HP hose DN32 * Hydraulic flushing hose reel with approx. 60m DN 13 Special features * Suction and HP boom * 5 liter hand washing device * Stainless steel tool box * Control cabinet without display * Radio remote control with display * Device cabinet with two flaps - on both sides * Hose storage * Sound insulation of the pump compartment raised * Working lights * Central lubrication system Technical data * Unladen weight 18,810 KG * GGW 26,000 KG * Length 10,350 mm Dsdpfxovh H Dyo Afnecc * Height 3,890 mm * Width 2,550 mm Special equipment: Axle load front axle 9.0 t, Audio system: CD radio comfort (Bluetooth), Exhaust raised behind cab, Compressed air horn, Cab: Movable cab entrance, Cab: Comfort suspension (1.8 HZ), 16-speed gearbox, Reinforced cooling, Air filter: Construction site vehicle filter, Air filter: Cyclone air filter, Power take-off independent of gearbox, Parameterizable special module, Rotating beacon left/right, Automatic circuit breaker, Sun visor, Stabilizer on 1st rear axle, Socket 12 volt, Stone impact protection grille, Front bumper in steel design, Drum brakes front and rear axle, Oil filter on front and rear axles, Oil filter on rear axle Socket 12 volt, Stone guard, Front bumper in steel design, Drum brake front and rear axle, Oil cooler transmission Further equipment: EURO 5 emissions standard, Axle configuration: 6x4, Exterior mirrors electrically adjustable and heated, Exterior mirrors wide angle and heated, left, Exterior temperature display, Battery 165 Ah, Roof hatch (steel), Rear axle differential lock, Cab: M (medium length), Suspension: leaf/leaf, Generator 80 A, Rear axle H 7, 13 t, Disc wheel 300, Hydraulic pump (Meiller pump - 6 pistons), Body/bodywork: Chassis for tipper (additional AV), Body/construction: tipper, Fuel tank: 300 ltr, Engine: 12.0 ltr. - 335 kW V6 diesel (OM 501 LA), Engine brake with constant throttle, Power take-off MB 2C, Wheelbase 3900 mm, Rear window, Seats in cab: Driver's seat, standard swivel seat, Telligent gearshift, Telligent brake system with ABS+ASR, Drum brake rear axle, CB radio preparation, Telephone/fax preparation, Front axle straight, Immobilizer, Thermal insulation glazing, Central locking incl. key, Gross vehicle weight 26.00 t For more detailed information and/or pictures, please contact us directly. You will find a large selection of other vehicles to BUY or RENT under: Subject to changes, prior sale and errors excepted. The buyer is obliged to independently check the condition and equipment of the goods. The sale is subject exclusively to our general terms and conditions and to the exclusion of any warranty.

Condition: new, Year of construction: 2024, total height: 860 mm, total length: 2,000 mm, total width: 1,000 mm, overall weight: 650 kg, height adjustment type: mechanical, Manufacturer: GERD WOLFF Technical Details: • Length 2000 mm • Width 1000 mm • Height 200 mm • Weight 650 kg • Hole diameter 28 mm • Hole spacing 100 mm • Plate thickness: 25mm Advantages and Features: • 3-day gas nitriding process • Increased corrosion resistance • Weld spatter adhesion protection • Maximum load capacity • Enhanced fatigue strength • Improved vibration resistance • Fine scale engraving • Reinforcement with welded seams and ribs on the underside • Optimal working height of 820-865 mm • 4 height-adjustable support legs • Available with a matching accessory set (optional) Our welding tables are manufactured using HT 300 cast iron and are nitrided as a whole after mechanical processing. Furthermore, they feature precise fine scale engraving using laser technology. To ensure adequate stability, our welding tables are reinforced with welded seams and ribs on the underside (see illustrations). Additionally, they undergo a 3-day gas nitriding process, enhancing their corrosion resistance, fatigue strength, and vibration resistance, among other factors. All our tables come with adjustable legs. The minimum height adjustment range is 620 mm, while the maximum is 665 mm, allowing for a variable working height of 820 to 865 mm. Additional available dimensions: • 1000 x 1000 x 200 • 1200 x 1200 x 200 • 1500 x 1000 x 200 • 1500 x 1500 x 200 • 1500 x 2000 x 200 • 2000 x 3000 x 200 • 3000 x 1500 x 200 • 3000 x 2000 x 200 • 4000 x 2000 x 200 • 2400 x 1200 x 200 Please note that the images are not to scale and are for illustrative purposes only. Our welding tables are produced for our distribution brand "GERD WOLFF Maschinenfabrik" by a reputable manufacturer. Dcsdpfjvbbqzjx Afnjc 3D Welding Table - 3D Clamping Fixtures - 3D Precision Welding Table

Condition: new, length 1900 mm width 810 mm Dsdpfxsgvqz Is Afnocc height 860 mm internal dimension 1,5 x 0,74 x 0,78 m weight of the machine ca. 200 kg dimensions of the machine ca. 1,9 x 0,81 x 0,86 m For collecting and disposing of bulk goods and industrial waste - Tipping container - forklift attachments for in-house storage of Bulk solids - powder-coated in standard color: RAL 5010 blue, RAL 6011 green or RAL 7016 anthracite gray / special paint on request - Tilting device with base plates for swivel and fixed castors - Drainage device - Stable base frame with drive-in pockets - Favorable load center - Robust sheet steel construction with reinforced edges Container volume: approx. 600 l

Condition: used, mileage: 272,250 km, power: 324 kW (440.52 HP), first registration: 06/2013, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: orange, gearing type: mechanical, emission class: euro6, Year of construction: 2012, Equipment: ABS, air conditioning, ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT Internal Number: #480 MAN TGS 26.440 6x2 with KROLL High-Pressure Flushing and Suction Unit with WRS2 Water Recycling System KROLL Fahrzeugbau-Umwelttechnik GmbH * Type K 1.0-13.0/29 P * HOSE STORAGE CASSETTE WITH SIMULTANEOUS TELESCOPIC BOOM DN 125 * Reach, hook side: 5,200 mm * Tank material: S355J2+N (St. 52.3) * Water recycler * Telescopic piston with 3 locking positions * EMPTIED by a pneumatically operated piston * SLUDGE WATER OUTLET DN 80: for recirculating dirty water back into the sewer via the boom. * Side water compartments MAN TGS Chassis * 26.440 6x2 * Manual transmission * EURO 6 * Fuel capacity approx. 400 l * Cab color: municipal orange RAL 2011 * 2x LED beacons on the cab * Rear-view camera * Air conditioning Vacuum system CVS WR 3100, approx. 2,465 cbm/h at 400 bar * Drive: flexible via propeller shafts, V-belts, and pneumatically engaged friction clutch from the vehicle engine PTO * Approx. 20m HD hose DN 125 * Hose storage cassette with simultaneous telescopic boom DN 125 * Reach, hook side: 5,200 mm High-pressure system Uraca P 3-45 approx. 345 l/min at 205 bar * Drive: flexible via propeller shafts, V-belts, and pneumatically engaged friction clutch * Large HD hose reel for 240m 1” DN 25, 180° pivotable * Fitted with approx. 200m DN25 * Small HD hose reel for 80m ?? DN 13, hydraulically operated * Fitted with approx. 60m DN13 Special features of hose storage cassette with telescopic boom DN 125 * Infinitely variable hydraulic height adjustment of the suction hose via roller guide trolley * Suction hose boom is hydraulically extendable, telescopic, and pivotable by 180° * KROLL water recycling WRS2 * Spray gun * LED beacons * LED surround lighting * Remote operation of work functions via CAN-BUS technology * Remote control * Rear-view camera with 7” color monitor * Acoustic insulation in pump room Dedpowwf S Tefx Afnecc * Large equipment box and hose trays * Toolbox * Holder for traffic cones * Vise * Cable pulley for 'banana'/ deflection device * Large advertising panels on both sides For further detailed information and/or images, please contact us directly. A large selection of additional vehicles for PURCHASE or RENTAL can be found at: Changes, prior sale, and errors excepted. The buyer is required to personally verify the condition and specification of the goods. Sale is made exclusively according to our terms and conditions and excludes any warranty. Special Equipment: Front axle load 9.5t, exhaust pipe raised on right, passenger bench seat, rear axle differential lock, ETA circuit breaker, flame-start device, high-load roll stability, automatic climate control, steered trailing axle NOL-08, liftable, PTO NMV221, rotating beacons (2), external sun visor, fleet management system control module, reinforced front axle shock absorbers, pre-installation for engine start/stop system at end of frame

Year of construction: 2007, condition: used, Plant: Mobile sludge dewatering plant, decanter / centrifuge mobile Manufacturer:Hiller Dcedpfx Afeppucaonoc Model: Solid bowl screw centrifuge Type: DP51 Machine No.: H3991 Year of construction: 2007 Maximum permissible: Drum speed 3400 I/min Inner diameter of bowl: approx. 505 mm Reel material: ST52,0 drum wall thickness:13,0 mm Other: steel exchange case with reinforced bottom, Accessories: pump for sludge inlet, flocculant suction pump, flocculant discharge pump Flocculant station: 2 chamber system for liquid polymers with agitator , adjustable Double shaft paddle mixer: galvanized steel Total mass: approx. 4200 kg Purchase and rent possible.

Condition: good (used), in total 14 pieces available 3 x SEEPEX Nemo 1 x NETZSCH NM045, GETRIEBEBAU NORD, year: 2001 2 x NETZSCH NM021BY, HANNING 0,75 kW, year: 2014 2 x ALLWEILER SEP 380.1A11P01, year: 1990/1992 2 x ALLWEILER AE1N25-ID, GETRIEBEBAU NORD 0,75 kW, year: 1996 Dcedpfxjlhr Hfs Afnsc 3 x ALLWEILER AE1E550-ID, GETRIEBEBAU NORD 4 kW, year: 1996 1 x unknown brand, LEROY SOMER gearbox, 5,5 kW

Condition: used, mileage: 112,474 km, power: 260 kW (353.50 HP), first registration: 10/2001, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: orange, gearing type: semi-automatic, emission class: euro3, total width: 2,550 mm, total height: 3,600 mm, Year of construction: 2001, Equipment: ABS, ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ Internal number: #231 Mercedes Actros 2535 6x2 Wiedemann Super 2000 Body: - Wiedemann enviro tec - Super 2000 6.0/5.0/2.0 water recycling - 11,000-liter tank capacity - 5,000 liters flushing water - 6,000 liters sludge volume - Tank can be emptied by tilting at 45° Vacuum System: - Wiedemann & Reichhardt KW 2000 - 2,000 m³/h - approx. 20 m suction hose DN 125 - Operating hours: approx. 6,933 h High-Pressure System: - URACA KD716, 333 l/min at 170 bar - approx. 230 m high-pressure hose DN 25 - Hydraulic jetting hose reel with approx. 70 m DN 15 - Operating hours: approx. 4,176 h Special Features: - Sludge tank made of stainless steel - Suction and high-pressure booms - Engine can be started from the control cabinet - NMV can be started from the control cabinet - Wireless remote control with display - Equipment cabinet with two flaps, accessible from both sides Dedpfx Ajvh H Hzofnjcc - Hose storage rack - Pump compartment with extended sound insulation - Centralized lubrication system Technical Specifications: - GVW 26,000 KG - Length 9,900 mm - Height 3,600 mm - Width 2,550 mm Chassis: Special Equipment: - Raised exhaust behind cab, additional air compressor, MB 2C PTO, programmable special module, rotating beacon, rear window, circuit breaker, cab seats: driver comfort suspension seat, cab seats: middle seat with seatbelt, sun visor, steel front bumper Additional Equipment: - Emission standard Euro 3, axle configuration 6x2, hill-start aid with timer, trailer brake 2-line, trailer coupling: G 150, trailer socket 24V / 15-pin, electrically adjustable & heated exterior mirrors, battery 165 Ah, rear axle differential lock, cab: off-road mounting (6.0 HZ), cab: M (medium length), suspension: air/air (full air), electric window lift right, electric windows, alternator 80 A, 16-speed transmission, body/chassis: chassis, fuel tank: 400 l, rear top air intake, 1-chamber heated air dryer, engine 12.0 l - 260 kW V6 diesel (OM 501 LA), constant throttle engine brake, wheelbase 4,500 mm, rear axle disc brakes, front axle disc brakes, voltage converter 24V / 12V 8A, rear axle stabilizer, Telligent gearshift, CB radio prep, phone/fax prep, cranked front axle, immobilizer, permissible gross weight 26.00 t For further detailed information and/or photos, please contact us directly. A wide selection of additional vehicles for SALE or RENT can be found at: All information subject to change, prior sale, and errors excepted. The buyer is obliged to independently verify the condition and features of the goods. Sale is carried out exclusively under our terms and conditions and with the exclusion of any warranty.

Condition: used, mileage: 69 km, first registration: 08/2023, fuel type: diesel, axle configuration: > 3 axles, gearing type: automatic, emission class: euro6, loading space volume: 10 m³, Year of construction: 2023, operating hours: 8 h, machine/vehicle number: EXVAC SE.10, RIVARD suction excavator EXVAC SE.10 Dodjg Dl Arspfx Afnscc !! IMMEDIATELY AVAILABLE !!! RIVARD industrial turbine Detachable suction hose inlet 10.5 m³ container volume 4-joint boom Hydrostatic drive Filter cleaning Rear / front fall protection Camera route monitoring

Year of construction: 2025, condition: new, Standard version with column Motorised height adjustment 700 mm Articulated arm length 2x 1.100 mm Height adjustment of grinding spindle 130 mm Grinding motor 5,5 kW including the following options: + speed control, spindle speed approx. 250 - 1.000 min-1 Dodpfogn Tzljx Afnscc + pneumatic grinding pressure support + bellows cover for column and trapezoidal spindle + Incl. foundation screws and mounting template Grinding tools optionally available Request more information