Used Hermes for sale (475)

Condition: excellent (used), mileage: 664,966 km, power: 213 kW (289.60 HP), first registration: 06/2008, fuel type: diesel, fuel: diesel, color: white, driver cabin: day cab, gearing type: mechanical, emission class: euro6, Equipment: tail-lift, Year of construction: 2008 Cab: single Empty weight: 9.970 kg Carrying capacity: 9.030 kg GVW: 19.000 kg Tail lift: slider lift Technical condition: very good Visual appearance: very good Registration number: CX427QQ = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. Gedpfx Acezz S T Nomokd No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Year of construction: 1999, condition: ready for operation (used), machine/vehicle number: 9920268, GEISS DU2000 T7 Vacuum Thermoforming Machine • 1999 • 2000 × 1000 mm • Halogen Heaters • Sinumerik Control Gksdpex Uz Ncjfx Acmjd Industrial vacuum thermoformer with large 2000 × 1000 mm sheet capacity and deep draw capability up to ~650 mm. Equipped with high-speed halogen flash heaters, Sinumerik heater control, three vacuum pumps, plug assist, auto sheet loader, and motorized window plates for rapid tool changes. Excellent for high-volume thermoformed parts production.

Condition: used, Nema NCG 4390 S Temperature Shock Chamber -40°C to +180°C Manufacturer: Nema Type: NCG 4390 S Temperature range: -40 °C to +180 °C Dew point range: +5 °C to +89 °C Supply voltage: 400 V Rated current: 32 A Rated power: 15 kW Refrigerant: R 404 A Year of manufacture: 1999 Weight: 2720 kg External dimensions: W 3950 x D 1700 x H 2280 mm Internal dimensions: W 3000 x D 1300 x H 1170 mm WLG DAMPF-O-MAT Electrically controlled automatic steam humidifier and generator for mineral-free and odorless steam Manufacturer: WLG DAMPF-O-MAT Type: EDB 8 Heating voltage: 400 V Power: 6 kW Steam output: 8 kg/h Water-cooled condenser Manufacturer: Bitzer Water-cooled Supply voltage: 400 V Rated current: 13 A Rated power: 4 kW Refrigerant: R 404 A Weight: 145 kg KK-08 Gkodsuzgt Espfx Acmed You can find more items – new and used – in our shop! International shipping costs available upon request!

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, 1 x Ilpra Packaging Solutions thermoformer fitted with Siemens S7 1200 PLC control panel and ILPRA thermo-transfer printer mod. I-PRINT (printing area 53 x 400mm). Supplied with 5 x sets of tooling. Manufacturer - ILPRA S.p.A. Model - Formpack F0 TMF Long Version. Date of manufacture - 2019. Can be used for flexible, semi-rigid and rigid film packs. Speed - Output with sizes 2.2 and 4.2: approx 4/5 cycles per minute, Output with size 2.1: approx 5/6 cyclese per minute. Film width - up to 420mm wide. Maximum diameter of forming film reel - 400mm. Reel core diameter - 76mm. Thickness - 500 microns. Maximum diameter of top web film reel - 250mm. Reel core diameter - 76mm. Type of useable sealing film - plastic, aluminium, medical paper, Tyvec. Electric supply - 400 V / 50 hz / 3 phase. Compressed air supply -7 bar. Vacuum pump - Busch. Tooling external dimensions (internal) - Set 1 - 2x1 format: 197.5mm (177.5mm) x 300mm (280mm). Set 2 - 4x2 format: 98.75mm (78.75mm) x 150mm (130mm). Set 3 - 2x2 format: 190mm x 150mm x (122mm diameter). Set 4&5 - 2x2 format: 197.5mm (177.5mm) x 150mm (130mm). Gsdpfx Acjwp Ac Hemekd Previously used for packing various meat products. Last run in May 2025.

Year of construction: 2004, operating hours: 43,310 h, condition: excellent (used), functionality: fully functional, 2004 Illig RV 74b Three Station Thermoformer - Machines punch press toggle system has been completely replaced with new parts in August this year. Manufacturer Illig Model RV 74b Year 2004 Condition Good Approx hours 43310 Stations Three Delivery date Immediately Maximum forming area 704 x 514 mm Minimum forming area 400 x 250 mm Depth of draw 120/40 mm Max film width 760 mm Sheet thickness range 0.18 - 2 mm Operating pressure 2 bar Max dry cycles / min 35 All details are subject to change and/or errors. All equipment is subject to availability and/or prior sale. Gkedpfx Aj Ahw A Eecmed

Condition: used, axle configuration: 3 axles, first registration: 01/2015, total length: 13,400 mm, total width: 2,500 mm, total height: 2,700 mm, suspension: air, tire size: 385/65/22.5, color: other, Equipment: ABS, = Additional Options and Accessories = - Box container - Rear doors - Air suspension = Additional Information = General Information Year of manufacture: 2015 Registration number: QAAJ925 Axle Configuration Tire size: 385/65/22.5 Axle brand: Schmitz Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Lift axle Weights GVWR (Gross Vehicle Weight): 39,000 kg Maintenance, History, and Condition APK (Technical Inspection): valid until 01/2027 Gedps Akdn Sofx Acmjkd Damage: None

Condition: used, Year of construction: 2013, Hermle C400U Operating hours: Operating hours: 29,500 h Gjdpfx Acs Ai Iu Asmjkd Spindle since replacement: about 3,000 h Control: Heidenhain TNC530 Travel: X-850 mm, Y-700 mm, Z-500 mm A-axis: C-axis: 360 Spindle speed: 18.000 U/min Spindle mount: HSK-63A tool magazine: 38 pos. NC swivel table: 650 mm diameter chip conveyor: Yes Bleed-off device: Yes Electrical heat compensation: Yes probe: Renishaw Tool measurement: BLUM A2 suction: Yes electric handwheel: Yes

Condition: used, Autotherm ATK 2000 cooling system, 20.5 kW cooling system in a 20-foot container Technical data - Nominal voltage: 3/PE AC 50Hz 400V (DIN IEC 38) - Nominal power: 20.5 (31.5) kW - Nominal current: 50 (71) A - Supply line fuse: 80 A Mechanical data - Dimensions: (W x L x H) 2430 x 6800 x 4350 mm - Weight: 4800 kg - Supply: Flange SDIN2633 DIN100 PN16 - Return: Flange SDIN2633 DIN100 PN16 - Overflow / Drain: 2" internal thread - Well water inlet: 2" internal thread - Well water outlet: 2" internal thread - Adiabatic inlet: 3/4" internal thread - Filling: manual 3/4" internal thread Water circuit - Heat transfer fluid: Water/glycol (90 % / 10 %) - Flow pressure: max. 10.6 bar - Tank volume: 4000 liters Free cooling circuit - Pump type: Grundfos CR 45-1-1 AFAE-EUUE - Delivery pressure: ... 2.15 bar - Flow rate: 58 m³/h Consumer circuit - Pump type: (Pressure boosting system) Grundfos Hydro 2000 ME 2 CRE 32-6 AFAE-EUUE - Delivery pressure: max. 10.6 bar - Flow rate: max. 40 m³/h 20-foot container AIS-DSC-22-28 External dimensions mm (L x W x H): 6,058 x 2,438 x 2,591 Internal dimensions mm (L x W x H): 5,898 x 2,352 x 2,390 Usable area inside m²: 13.88 Compact control Compact Control 2000 ME. Compact microprocessor control for stepless and cascade control of pumps with MGE motors and integrated frequency inverter for demand-dependent, energy-optimized operation of multi-pump systems. With automatic switching on and off of the individual speed-controlled pumps via a digital controller specially developed for centrifugal pumps. Gkjdouzhcuopfx Acmsd Grundfos R100 infrared handheld device and diagnostic unit: for commissioning, data monitoring, reading error messages and configuring Grundfos pumps. You can find more items - new and used - in our shop! International shipping costs on request!

Condition: used, EMA high-frequency welding machine with a chilled water unit EMA high-frequency welding machine MFA with Thermotec PT2000 water cooling system Welding machine range: 0 - 1000 °C MF output: 80A MF generator frequency: 10 kHz Mains connection: 380V 106 A Foot pedal Water cooling, chilled water unit Thermotec PT2000 Dimensions approx. L1500 x W730 x H1900 mm Volume: 1730 liters Year of manufacture: 2004 The collection basin is not included in the scope of supply. You can find more items – new and used – in our shop! International shipping costs available upon request! Gkedpfx Ajd Tv H Dscmjd

Condition: used, Mathis THN 10988 Laboratory Thermosoling System Gkjdpfx Acju D Arismed Application: This combination of a padding machine and a dryer has proven to be extremely effective in practice. It is used in this form for a variety of hot air treatment processes, such as drying, fixing, condensing, thermosoling, etc. The system is used wherever a specific sample size is required, for example, for the production of sample collections or similar applications. Dryer THN If all the aforementioned applications are to be ensured and the use of frame racks is also desired when the dryer is operated independently, the THN type is preferable. The standard frame racks are suitable for a sample size of max. 50 x 50 cm (larger frame racks are available upon request). If all the above-mentioned application possibilities are to be ensured and the use of frame racks is also desired for the stand-alone operation of the dryer, the THN model is preferable. The standard frame racks are suitable for samples up to a size of 50 x 50 cm (larger frame racks are available upon request). Length-adjustable frames for fabrics or length and width-adjustable material holders for knitted fabrics, mesh fabrics, non-woven fabrics, etc., as well as clamping frames for foils and paper are available. Drying chamber The drying chamber with electrical distribution box and control panel is mounted and screwed onto a base frame. A double-walled construction with insulation in between ensures good thermal insulation of the dryer. The 1300 mm long nozzle arrangement is divided into an upper and a lower nozzle compartment. A control flap allows the ventilation to be regulated evenly from above and below or the airflow from above or below. Fan and heater A powerful fan with a capacity of approximately 900–3500 m³/h, in combination with an optimally matched heating capacity, ensures intensive air circulation and thus optimal evaporation performance. A double-protected monitoring system reduces maintenance and increases the operational safety of the dryer. The heating capacity is designed for rapid heating and is automatically reduced after the desired temperature is reached in order to avoid unnecessary power surges. The temperature is controlled electronically in the range of 20–250 °C. Fresh air is directed directly into the recirculating air fan via a fan. The desired airflow can be adjusted using a step switch. Technical data Air speed approx. 4–12 m/s Air volume flow approx. 900–3500 m³/h Temperature range up to 250 °C Heating capacity approx. 27 kW Nozzle cross-section 1300 mm Infinitely adjustable fabric tension Multi-stage adjustable fresh air supply Dimensions (L x W x H): 4800 x 1380 x 1750 mm Purchase price: €86,275 You can find more items in other sizes – new and used – in our shop! International shipping costs on request!

Condition: used, Vötsch VT 7030 S2 Temperature Shock Test Chamber System for extreme temperature changes During temperature shock testing, the resistance of components, devices, and other products to rapid changes in ambient temperature is tested. The test specimens are subjected to rapid temperature changes in air with alternating upper and lower temperature loads. By means of these cyclic loads and the accelerated aging caused by temperature changes, weaknesses in the test specimen can be identified. Vertical arrangement of the test chambers Ball screw drive for secure guidance of the carriage All-round grids in the carriage secure the test specimens High air circulation rate, short temperature change times, and uniform temperature distribution in the test chamber The warm chamber can be used as a temperature storage device, and the cold chamber as a temperature change device Touch panel for convenient operation of the simulation programs with graphical display Minimal energy consumption No compressed air required Data for temperature tests in single-chamber operation Warm chamber: Temperature shock test chamber, test chamber 300 l Temperature range +50 °C to +220 °C Temperature deviation over time in the center of the usable space ± 1 K Temperature deviation spatially ± 2 K Temperature gradient (according to IEC 60068-3-5) 4 K Temperature change rate (according to IEC 60068-3-5, measured in the supply air) Heating 11 K/min Cold chamber: Temperature shock test chamber, test chamber 300 l Temperature range -80 °C to +70 °C Temperature deviation over time in the center of the usable space ± 1 K Temperature deviation spatially 2 K Temperature gradient (according to IEC 60068-3-5) 4 K Temperature change rate (according to IEC 60068-3-5, measured in the supply air) Heating 1.5 K/min Cooling 4 K/min Technical data: Temperature shock test chamber Test chamber volume approx. 300 l Voltage: 3/N/PE AC 400 V ± 10 %, 50 Hz Nominal power: 30 kW Nominal current: 50 A Refrigerant: R-404a /R-23 Refrigeration unit: Water-cooled Weight: approx. 940 kg Year of manufacture: 1998 Test chamber dimensions: Width 770 mm x Depth 650 mm x Height 610 mm Housing dimensions: Width 1200 mm x Depth 1800 mm x Height 2050 mm Godpfowbdv Sjx Acmokd TS 05 You can find more new and used items in our shop! International shipping costs on request!

Condition: used, This listing is for a Thermo Scientific Heratherm IMH400-S Incubator. The unit is in full working condition and ready for immediate use. Advanced gravity convection technology ensures stable temperatures. Power-On Verified. The Thermo Scientific Heratherm IMH400-S is a high-performance microbiological incubator designed for delicate samples. It features a stainless steel interior, intuitive interface, and exceptional temperature uniformity. Ideal for research and clinical labs requiring reliability and precision. Transparency Report and Technical Audit: • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original) • Power-On Test: Verified; Digital display active, lighting operational, and fan system engaged. • Integrity: 100% Original Parts (Non-Refurbished) • Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Gkjdpfsxzh H Eex Acmod Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory.

Year of construction: 2004, condition: used, functionality: limited functionality, machine/vehicle number: ST 5151, We offer this used Envirotec Envitherm 50.0/3 W thermal afterburning system, manufactured in 2004. Manufacturer's serial number: ST 5151 Year of manufacture: 2004 Three-chamber operation Exhaust gas volume: 50,000 Nm³/h Combustion chamber temperature: 800°C The system essentially consists of three reactor vessels, which are filled with honeycomb bodies as heat storage. Gksdpfx Acez Stbzjmsd The system is equipped with two hot bypasses and an energy recovery system. If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: used, Year of construction: 2012, This MIWE Thermo Express rack oven system consists of 2 ovens, each with 9 racks, thus offering excellent capacity for medium-sized bakeries. The ovens are heated with thermal oil, which provides excellent baking quality that is unparalleled. The ovens also have an automatic loading and unloading system, making baking a breeze. consisting of: 2x MIWE Thermo Express rack ovens 9 racks per oven Total baking area: 68.4 m² MIWE Athlet B330S automatic loading and unloading system Including exhaust system at the loader Central control unit Gkodpfxs Ahwvbs Acmed Heating boiler central unit HKZ350

Condition: used, Year of construction: 2021, functionality: fully functional, Dürr Ecopure VAR 2206 Thermal Oxidizer with Flue Gas Cleaning (2021) For burning liquid and gaseous waste streams including fluorinated gases, e.g. PFAS, and recovery of aqueous hydrogen fluoride Emissions limits SO2 ≤ 100 mg/Nm³ NOX ≤ 30 mg/Nm³ CO ≤ 50 mg/Nm³ CF4 ≤ 70 mg/Nm³ HF ≤ 1 mg/Nm³ NH3 ≤ 2 mg/Nm³ Comprising Direct fired thermal oxidizer Hot gas cooling and acid recovery Alkaline wet scrubber Honeycomb selective catalytic reduction deNOx system >1M cost spare parts Direct fired thermal oxidizer Including 2x natural gas combustion chambers and burners - High calorific liquid waste requires safe ignition supplemental hydrogen supply for acid formation - Gaseous waste streams injected via nozzles downstream and close to the burner - 1.5MW multi-fuel natural gas & liquid waste (minor fuel stream) burner with natural gas capacity up to 200Nm3/h - 1400C normal, 1540C max allowable temperature destruction of pollutants to reduce emissions with 3.28 MW thermal energy transfer - 2 seconds minimum residence time in combustion chamber at 1400C - 1,800mm combustion chamber internal dia. - Approx 300mm refractory lining - 2,400mm combustion chamber external dia. - 12,000mm combustion chamber internal length - 3.28MW maximum thermal capacity - 4,900Nm3/h, 60mbar, 14kW combustion air fans One chamber is active, the other one is on standby and can be prepared, repaired, or maintained. This allows minimizing shutdown and changeover time to only several days Wet scrubber hot gas cooling and acid recovery SGL Carbon Diabon HT-PQ 850 graphite pipe quencher - 6,000 Nm3/h capacity flow - 1,100 mm dia. - 2,000mm high Gsdpjz Ai Tpsfx Acmekd - pumps SGL Carbon Diabon THX-RS falling film absorber shell & tube heat exchanger - 1,100mm dia. - 4,500mm tube length - 595 no. tubes - 22mm tube internal dia. - Graphite, carbon steel - pumps Quench vessel - PP/FRP - 1,100mm dia. - Approx. 6,000mm high 2x Scrubber absorber columns, each - Shell FRP/PP - Internals PP - 1,000mm dia. - 11,000mm high - Pumps - Dosing station FRP 5m3 Emergency water tank - 1,600mm dia. - 3,000mm high - 3kW heating 2x Teblick 100,000L HDPE hydrofluoric acid tanks (2019) Honeycomb selective catalytic reduction deNOx system - 5,900Nm3/h, 130mbar, 42kW induced draft fan - 320 kW gas/gas heat exchanger - 500 kW capacity reheat burner - 1.2m deNOx honeycomb catalyst Clean gas outflow Stack with flow & temperature measurement Spare parts include - 200 items of sensors, pumps, valves, gaskets, joints etc. - Graphite quencher - Falling film absorber With the redesign and maintenance support of Dürr, the system could also - be adapted to other halogenated gases with bricks to be selected according to gas application - cope with the presence of VOCs or contaminated air - larger volumes with the addition of a small lance for 15kg/h liquid injection

Condition: excellent (used), mileage: 474,277 km, power: 162 kW (220.26 HP), first registration: 08/2002, fuel type: diesel, tire size: 275/80 R22.5, axle configuration: 4x2, fuel: diesel, color: other, driver cabin: day cab, gearing type: mechanical, number of gears: 6, emission class: euro3, suspension: other, total length: 8,600 mm, total width: 2,600 mm, total height: 3,800 mm, loading space length: 6,380 mm, loading space width: 2,500 mm, loading space height: 2,500 mm, Equipment: ABS, airbag, cruise control, electric window regulation, power assisted steering, = Additional options and accessories = - Passenger seat - Spare wheel = Remarks = Tail lift: Yes TRANSPORT TO ANTWERP 590 EURO Cool unit brand: Thermo King = More information = Year of construction: 2002 Tyre size: 275/80 R22.5 Brakes: disc brakes Front axle: Steering; Suspension: parabolic suspension Rear axle: Double wheels; Suspension: air suspension Gkedszw Hpdspfx Acmed Empty weight: 9.580 kg Technical condition: very good Visual appearance: very good

Condition: good (used), Year of construction: 2001, Greiner Thermorunner 4 for polypropylene (PP) and polystyrene (PS). Including heating station, forming station and cooling system. * Punching force: 180000N * Production speed: max. 45 cycl/min * Sheet width min: 150 mm * Sheet width max: 560 mm * Sheet thickness min: 0.3 mm * Sheet thickness max: 2.5 mm Gkodpfx Aen Utzfscmsd This Thermoforming Line is already disassembled and secured for transport (Location: Waalwijk, The Netherlands)

Condition: new, Year of construction: 2022, functionality: fully functional, type of input current: three-phase, power: 50 kW (67.98 HP), input voltage: 400 V, fuel: domestic gas H, overall weight: 2,200 kg, nominal power: 50 kW (67.98 HP), input frequency: 50 Hz, continuous power: 50 kW (67.98 HP), input current: 72 A, Equipment: documentation/manual, For sale: new and unused 2G g box 50plus combined heat and power (CHP) unit from 2022. This is a 2G Energietechnik g box 50plus, configuration as70 4, suitable for simultaneous generation of electricity and heat using natural gas. The unit has never been put into operation and is in new condition. At full load, the CHP unit delivers 50 kW of electrical power and approximately 104 kW of thermal power. The unit is designed for 400 V and 50 Hz and is equipped with a Liebherr G924 natural gas engine and a Leroy Somer LSAH 44.3 generator. Technical specifications: • Manufacturer: 2G Energietechnik GmbH • Type: g box 50plus • Configuration: as70 4 • ID number: H1214 • Year of manufacture: 2022 • Electrical power: 50 kW • Thermal power: approximately 104 kW • Rated voltage: 400 V • Rated frequency: 50 Hz • Rated current: 72 A • Weight of CHP module: approximately 2,200 kg • Fuel: natural gas • Electrical efficiency: approximately 34.5 percent • Thermal efficiency: approximately 71.8 percent • NOx emissions: less than 125 mg per Nm³ • Sound pressure level of CHP: approximately 55 dB(A) at 1 meter The offered package consists not only of the CHP module. The installation also includes two Viessmann boiler bodies, one Viessmann Proflame VM IV 3 gas burner, a separate control cabinet, and various flue gas components, fittings, and related documentation. The original new price of the complete installation was approximately €189,000. Gjdpoz Hngmefx Acmskd The installation comes from a project for which it was ultimately not used. The various main components are from 2022 and have been stored without being put into operation. Due to the size and composition of the installation, we advise interested parties to contact us in advance for further technical information, photos, documentation, and an overview of the components available. An inspection is, of course, possible (location: Winterswijk, Netherlands). Loading onto the buyer's transport vehicle is possible on site.

Condition: used, This listing is for a stack of 3 x Thermo Scientifi Max Q 8000 Orbital Shaker-Incubator The units are in full working condition and is ready for immediate use Also available as individual units The MaxQ 8000 provides high-capacity orbital shaking with integrated temperature control. This unit is direct-from-lab surplus in original condition, ideal for growing cultures and general mixing applications while saving valuable floor space. Viewing is possible in Duxford by appointment Professional Asset Overview The Thermo Scientifi Max Q 8000 Orbital Shaker-Incubator was acquired after decontamination as a surplus asset directly from a high-tier research facility. This unit is sold in its Original Lab State. We specialize in Direct Reuse, meaning we do not tamper with, refurbish, or alter the internal components of the machine. You receive the instrument exactly as it was decommissioned from the active research bench. Transparency Report and Technical Audit: • Source Pedigree: Tier-1 Biotech • Condition: Direct-from-Bench Original • Power-On Test: Verified • Integrity: 100% Original Parts (Non-Refurbished) Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Gsdpfx Asyv Ik Necmokd • Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is, Where-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory..

Condition: used, HERAfreeze HFU400TV60 Ultra-Low Temperature Freezer –50 to –85 °C For sale is a professional HERAfreeze HFU400TV60 from the manufacturer Thermo Fisher Scientific. This laboratory ultra-low temperature freezer was developed for the storage of temperature-sensitive samples and materials at extremely low temperatures. It is particularly suitable for research institutions, universities, biotechnology companies, and industrial laboratories. Features and properties: - Temperature range from –50 to –85 °C - Generous storage volume of 548 liters - Capacity for up to 400 standard storage boxes, 2 inches each - Microprocessor-controlled temperature regulation - Touchscreen operation - USB interface for retrieving system data - Adjustable temperature alarms - Two-stage cascade cooling system - High-quality thermal insulation - Lockable housing - Casters with locking function Technical data: Manufacturer: Thermo Fisher Scientific Gjdpfo Aigtqsx Acmekd Brand: Thermo Scientific Model: HERAfreeze HFU400TV60 Device type: Laboratory ultra-low temperature freezer Temperature range: –50 to –85 °C Usable volume: 548 liters Storage box capacity: Up to 400 standard boxes Operating voltage: 230 V Frequency: 50 Hz Power consumption: 9.5 A Control: Microprocessor with touchscreen Cooling technology: Two-stage cascade system External dimensions W × D × H: approx. 820 × 960 × 1,980 mm Internal dimensions W × D × H: approx. 590 × 720 × 1,300 mm Shipping weight according to the manufacturer: approx. 332 kg Country of manufacture: USA "Everything from one source: We would be happy to offer you suitable bank financing for your project." More items – new and used – can be found in our shop! International shipping costs on request!

Condition: excellent (used), axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 07/2014, loading space length: 13,480 mm, loading space width: 2,510 mm, loading space height: 3,040 mm, total length: 13,750 mm, total width: 2,600 mm, wheelbase: 8,760 mm, color: other, General information Year of construction: 2014 Gkjdezyvfaopfx Acmsd Registration number: ON-87-HV Axle configuration Rear axle 1: Max. axle load: 9000 kg Rear axle 2: Max. axle load: 9000 kg Rear axle 3: Max. axle load: 9000 kg Weights Empty weight: 8.730 kg Carrying capacity: 28.270 kg GVW: 37.000 kg Functional Cooling engine: diesel and electric (3037 operating hours diesel) Condition Technical condition: very good Visual appearance: very good Financial information Price: On request = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: excellent (used), mileage: 305,413 km, power: 135 kW (183.55 HP), first registration: 07/2012, fuel type: diesel, axle configuration: 4x2, wheelbase: 4,650 mm, fuel: diesel, color: black, driver cabin: day cab, gearing type: mechanical, number of gears: 6, emission class: euro5, total length: 8,740 mm, total width: 2,600 mm, loading space length: 6,440 mm, loading space width: 2,420 mm, loading space height: 2,300 mm, Equipment: ABS, air conditioning, electric window regulation, power mirror, = Additional options and accessories = - Air suspension - Leaf spring - Radio/Cassette player - Radio/CD player - Spare tire - Speed limiter - Sun visor = Remarks = Tail lift: DHOLANDIA, 1500 kg Damages: none XLRAE45FF0L416612 Cool unit brand: Thermo King = More information = Year of construction: 2012 Number of cylinders: 4 Engine capacity: 4.460 cc Empty weight: 6.400 kg Carrying capacity: 5.600 kg GVW: 12.000 kg Technical condition: very good Visual appearance: very good Registration number: 59-BLP-9 = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. Gkodjymqdxjpfx Acmjd When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: used, Year of construction: 1997, rapid traverse X-axis: 30 m/min, total height: 2,930 mm, total length: 2,700 mm, total width: 2,210 mm, overall weight: 7,500 kg, spindle motor power: 10,000 W, HERMLE C 800 U CNC 5-Axis Universal Machining Center Manufacturer: HERMLE Model: C 800 U Year of Manufacture: 1997 Serial Number: 11981 Control System: HEIDENHAIN TNC 430 Technical Specifications: Travel X-Axis: 800 mm Travel Y-Axis: 600 mm Travel Z-Axis: 500 mm Table Size: 540 × 540 mm Swivel Range: +° / −° Spindle Speed: –8,000 rpm (optional up to 15,000 rpm) Spindle Power: 10.5 kW Gsde Aimnqopfx Acmekd Tool Holder: ISO 40 Tool Changer: 30 tool positions Rapid Traverse X/Y/Z: 30 m/min Coolant Tank: 300 l Operating Voltage: 400 V / 50 Hz Total Power: 31 kVA Dimensions (L × W × H): 2,700 × 2,210 × 2,930 mm Weight: approx. 7,500 kg Weight approx.: 7,500 kg Tool Changer: Yes Spindle speed: 8000 - rpm Tool holder type: ISO 40 Travel Z-axis: 500 - mm Spindle performance: 10.5 kW Travel X-axis: 800 - mm Dimensions (LxWxH) approx.: 2700 x 2210 x 2930 mm Rapid traverse: 30 m/min Swivel range ° Number of tool locations: 30 Control: HEIDENHAIN TNC 430 Travel Y-axis: 600 - mm Table Dimensions: 540 x 540 mm Year of construction: 1,997 Condition: good Terms of payment: 100% prepayment before pick-up Terms of delivery: Loaded on truck under power: Yes

Condition: good (used), axle configuration: 3 axles, first registration: 01/2013, suspension: air, Equipment: ABS, = Additional options and accessories = - EBS - Rear doors - Lift axle - Air suspension = Further information = Year of manufacture: 2013 Suspension: Air suspension Rear axle 1: Lift axle Unladen weight: 5,830 kg Payload: 33,170 kg GVW: 39,000 kg Tipping: Rear Technical condition: good Optical condition: good Vehicle number: Tipping semi-trailer: 01 MOL / Thermo / Steel-Aluminum / Lift axle / 28 m³ .: YA2B39C0632139291 F.1 Technically permissible total weight in kg: 39,000 G Unladen weight: 5,830 kg Lift axle Steel-Aluminum 28 m³ Godpjz Av Uyjfx Acmekd No liability for printing and typographical errors, changes, prior sale, and errors. = Company information = No liability for printing and typographical errors, changes, prior sale, and errors. Al Shogran GmbH An der Glashütte 15 41516 Grevenbroich Tel.: Mobile: Ms. Sabine Faust Email:

Condition: used, Thermo Scientific   Thermo Scientific Forced Convection Drying Oven UT 6200 F with external temperature control unit Single STW150 temperature control system 85°C   Thermo Scientific Forced Convection Drying Oven UT 6200 F with external temperature control unit Complete laboratory temperature control and drying system   Description – Function & Application   Gsdpfx Asziy D Ejcmekd For sale is a professional temperature control and drying system consisting of:   Thermo Scientific / Heraeus Forced Convection Drying Oven UT 6200 F Single water temperature control unit STW 150/1-3-10-K5   The forced convection drying oven ensures uniform temperature distribution in the interior and is ideal for drying, heating, and tempering samples, components or materials.   The heating is carried out via the external water temperature control unit (external heater). This achieves a very stable, indirect, and material-friendly temperature control - without local overheating and with homogeneous heat distribution.   Typical applications:   Laboratory & Research Industry & Production Material testing / component drying Tempering, heating, drying at constant temperature Robust laboratory and industrial quality, reliable and durable.   Unit 1 – Forced Convection Drying Oven:   Manufacturer: Thermo Scientific / Heraeus Type: UT 6200 F   Technical data: Max. temperature: 85 °C Operating voltage: 230 V Frequency: 50 / 60 Hz Current consumption: 0.6 A Power: 0.14 kW Protection class: IP20   Dimensions & Weight (approx.) External dimensions: 895 × 816 × 715 mm Interior: 554 × 644 × 503 mm Volume: approx. 180 liters Weight: approx. 100 kg   Unit 2 – Water Temperature Control Unit:   Manufacturer: Single Temperiertechnik GmbH Type: STW 150/1-3-10-K5   Technical data: Heat transfer medium: Water Connection: 400 V / 3~ / PE / 50 Hz Current consumption: 6.9 A Heating power: 9 kW Apparent power: 4.7 kVA Max. temperature: 150 °C   Dimensions & Weight (approx.) Dimensions: 30 × 75 × 60 cm   Weight: 55 kg   Total:   Complete temperature control and drying system Operation together possible (external heating / external heater) Total weight: approx. 155 kg   Important note: "The table shown in the photos is not part of the sale."   Condition: used   Scope of delivery: (See image)   (Changes and errors in the technical data are subject to change!)   We will be happy to answer any further questions you may have by phone.