Used Hermes for sale (475)

Condition: used, Bystronic Type: ERMM180 Thermoplastic Applicator Application Area The thermoplastic applicator applies a thermoplastic material to rectangular glass panes within a production line for solar modules. The material forms a seal to a second glass pane, which is applied in a later process step. The panes are fed in, the material is applied, and the panes are removed on horizontally running belts/conveyors. The thermoplastic applicator is a highly advanced machine that must meet many requirements with great precision. For this reason, you should only process raw materials (glass, sealant) that meet the specifications on the following pages. This helps to achieve a high-quality and safe production. Performance and Connection Values Maximum transport speed: 18 m/min Height of the glass running surface: 1100 mm Height of the applied sealant bead: 0.5 to 1.2 mm Maximum width of the applied sealant bead: 12.0 mm Required constant inlet pressure, pneumatics: 6.5 to 8.0 bar Operating pressure, pneumatics: 6.0 bar Compressed air consumption, normal operation: 10 normal liters/min Compressed air consumption during drum change: 500 normal liters/min Average energy consumption per hour: 10 kWh Operating temperature of the sealant: 110°C to 130°C Ambient Conditions and Emissions Minimum ambient temperature: +15°C Maximum ambient temperature: +35°C Maximum relative humidity: 75% Sound pressure level: less than 70 dB (A) Requirements for the drums for the sealant Design: Material-lid container D18 according to DIN 6644 – with foot (F1) Gsdpfjzdyh Hsx Acmskd and smooth outer surface (body design, smooth). Capacity: 216 liters Inner diameter: 571.5 mm Height: 874 mm Minimum wall thickness: 1.25 mm Processable glass panes Glass types Glass panes with a smooth surface (float glass) can be processed. Dimensions and weights Smallest dimensions Largest dimensions Geometry 1198 mm 1200 mm Length LS 498 mm 600 mm Width BS 1.8* mm 5.0* mm Thickness DS Thermoplastic materials based on poly-isobutylene (butyl) can be processed. The material must be flowable in the range of approximately 110°C to 130°C and have a defined viscosity curve. Only use materials that have proven themselves in practice and have been approved by the manufacturers of these materials and by Bystronic for your intended use. For detailed product descriptions and information on the handling, storage, and disposal of the material used, please refer to the information sheets and safety data sheets, which the manufacturers of the materials will gladly provide. Dimensions of portal robot with glass conveyor Height x Width x Depth: 2800 x 1890 x 2735 mm Weight of the portal robot: 850 kg Weight of the glass conveyor: 1400 kg Dimensions of drum pumps Height x Width x Depth: 3320 x 1060 x 1200 mm Weight (without drum): 850 kg Weight (with drum): 1100 kg Height H at drum pump FP1: 4400 mm Height H at drum pump FP2: 4000 mm Dimensions of control cabinet Height x Width x Depth: 2200 x 1800 x 600 mm Weight: 450 kg The applicator was used with butyl material. Condition: used From a test laboratory, in new condition, only a few operating hours for testing! Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: used, Huber Type: 030TW Huber Unichiller 030TW – Recirculating Chiller / Cooling Thermostat For sale is a Huber Unichiller 030TW, a powerful and efficient recirculating chiller for laboratory and industrial applications. The unit is designed for continuous operation and offers consistent cooling performance with high energy efficiency. Features & Functions: Modern touchscreen control with favorites, timer, data logging, and remote control options Robust, closed-loop cooling system for reliable continuous operation Environmentally friendly refrigerant Suitable for ambient temperatures up to +40 °C Ideal for laboratories, chemistry, engineering, and process cooling Technical Data: Temperature range: –20 °C to +40 °C Temperature stability: ±0.5 K Cooling capacity: 3 kW at +15 °C 2.75 kW at 0 °C 2 kW at –10 °C 1 kW at –20 °C Circulation pump: max. 30 l/min at 4.1 bar Control: Pilot ONE touchscreen controller (5.7″ color display) Connections: Ethernet, USB, RS-232, Pt100 Refrigerant: R449A (CFC and HCFC-free, environmentally friendly) Dimensions (W × D × H): 400 × 440 × 1230 mm Weight: approx. 137 kg Condition: used Scope of supply: (See picture) Huber Unichiller 030TW Power cable Godpfx Acjzii T Aemskd (Subject to changes and errors in the technical data and specifications!) We will be happy to answer any further questions you may have over the phone.

Year of construction: 2006, condition: used, 1 x Variovac Primus Thermoformer Model: Primus Year: 2006 *Has been serviced by Variovac twice a year since being manufactured* Width of bottom film (nominal width): 402 mm Width of top film (nominal width): 395 mm Stroke length: 260 mm Film heating: pre-heating Forming pump: 60 cmb/h Gsdpfx Aj Adriaecmskd Evacuation by: side ports Evacuation pump 250 cmb/h Gassing system: via side ports Cross cutting system: 2x combination punch Die size: 1. 400-260 R P Pack sizes: 2.2,3.2 Operating language: English Electric power supply: 3 x 400 V N/PE, 50 Hz Automatic date coder Installed Gas Mixer 2x gas mixer installed Located in Bristol, UK

Year of construction: 2014, condition: used, This listing is for 1 of 2 Thermo Scientific ORBITOR RS Microplate Handler The unit is in full working condition and ready for immediate use This robotic microplate handler is a versatile arm designed to provide accurate and consistent automated movements for laboratory workflows. Manufactured by Thermo Scientific, this reliable collaborative robot is an excellent addition to any modern high-throughput screening facility. Transparency Report and Technical Audit: Software and Media Disclosure: Gkjdpfxszqf I Ee Acmjd As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory. 2015 Cedrex Fluid X xsd-48 Pro Source Pedigree: Biotech / Research Facility Condition: Direct-from-Bench (Decontaminated/Original) Integrity: 100% Original Parts (Non-Refurbished)

Condition: excellent (used), mileage: 687,313 km, power: 177 kW (240.65 HP), first registration: 10/2012, fuel type: diesel, fuel: diesel, color: other, driver cabin: day cab, gearing type: automatic, emission class: euro5, loading space length: 8,650 mm, loading space width: 2,470 mm, loading space height: 2,400 mm, Equipment: tail-lift, General information Year of construction: 2012 Cab: single Registration number: CM193DG Technical information Engine capacity: 7.146 cc Weights Empty weight: 9.960 kg Carrying capacity: 8.030 kg GVW: 17.990 kg Functional Tail lift: dholandia Make of bodywork: CHEREAU Cooling engine: diesel and electric Condition Technical condition: very good Visual appearance: very good = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Gksdpjywz Hyefx Acmod Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: ready for operation (used), Year of construction: 2000, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 430, total height: 2,930 mm, total width: 2,210 mm, table width: 560 mm, table length: 1,000 mm, overall weight: 7,000 kg, spindle speed (max.): 16,000 rpm, spindle motor power: 15,000 W, number of slots in tool magazine: 30, product length (max.): 2,700 mm, number of axes: 3, This 3-axis HERMLE C800V vertical machining centre was manufactured in 2000. It features a travel range of 800 mm in the X-axis, 600 mm in the Y-axis, and 500 mm in the Z-axis. The machine includes a 30-position tool changer and a spindle speed range of 16,000 rpm. If you are looking to get high-quality machining capabilities, consider the HERMLE C800V machine we have for sale. Contact us for further details. Gsdpoz D Tdxefx Acmskd - Power (40% / 100% Duty Cycle): 15 kW / 10 kW- Rapid Traverse (X, Y, Z): 35 m/min- Coolant System: 300 L – 40 L/min at 3 bar- Operation Voltage: 400 V / 3~ 50 Hz- Control Voltage: 24 V-- Total Nominal Current: 44 A- Total Rating: 31 kVA- Electrical Drawing No.: 300.91 K 40.1- Control Unit Operating Hours: 57,705 hrs- Machine Operating Hours: 48,735 hrs- Program Run Time: 19,077 hrs- Spindle Operating Hours: 18,005 hrs- Drive On: 30,073 hrs- Axes in Motion: 17,617 hrs- Included Equipment / Accessories:- Heidenhain TS 642 touch probe system (retrofitted in 2023)- 3 Allmatic vises- Approx. 300 tool holders- 3 jaw chucks- Miscellaneous small parts- Complete machine documentation and service reports- Service History:- 2019: New main spindle fitted- 2023: Retrofitted with Heidenhain TS 642 touch probe system Technical Specification Taper Size SK 40

Year of construction: 2005, condition: excellent (used), 1 x Variovac Optimus Thermoformer Model: Optimus Yeae: 2005 *During its time in production it was serviced twice a year by Variovac UK* Basic data: Product: Fresh bacon. Weight: various Top film: pa/pe 62µ clear Bottom film: pa/pe 200µ clear Evacuation: internal vacuum pump Capacity: 2-6 cycles/minute Packaging/cycle: 1 lanes/1 rows = 1 pcs. Pack sizes external: 280x240 mm Pack sizes internal: 265x 223 mm Max. draw depth: 70 mm Description of product: Bulk bacon 1 -track/ 1 -row = 1 pack/cycle Godpfx Acs Adrhvsmskd Vacuum only Located in Bristol, UK

Condition: used, Year of construction: 2009, HERMA provides specialized automated and semi-automated labeling systems designed for boxes, cartons, and packaging lines, built around the HERMA 500 High-Performance Labeler. [[1](/), [2](/)] Gkjdpfjz Rvb Iox Acmjd Key Box and Carton Labeling Solutions - Print & Apply Systems: Integrates a label printer and applicator unit to print variable data (such as shipping labels, barcodes, or tracking info) in real-time right before dispensing onto boxes. - Tamper-Evident Seal Labelers (e.g., HERMA 362E TE): Designed for sealing rectangular, dimensionally stable folding boxes and cartons with L-shaped or C-shaped security labels, achieving speeds up to 200 products per minute. - Top and Bottom Labelers (e.g., HERMA 652C): Compact, space-saving systems equipped with dual HERMA 500 applicators to apply labels simultaneously or sequentially to the top and bottom of packages at speeds up to 250 products per minute. - Two-Side Labelers (Series 362 - E, C, M, and TE variants): Provides accurate side or corner labeling for primary and secondary carton packaging, featuring synchronous centering devices and quick, tool-free format adjustments. Core Features - Modular Architecture: Built with standardized components allowing easy integration of thermal inkjet or thermal transfer printers, vision inspection systems, and automated rejection units. - High Precision & Speed: Powered by the HERMA 500 applicator series for high-cycle rates and stable label positioning. - Connectivity & Control: Features touch-screen operation, PLC/Ethernet interfacing, and automatic line-speed synchronization Type: Labeller for Boxer, top Jars, Bottles, Small Boxes, etc

Condition: used, High-Speed Thermo-System / Baking-System Kodak-TSO-850 High-Speed Thermo-System Einbrenn-System Kodak TSO-850 High-Speed Thermo-System / Baking-System Kodak-TSO-850 High-Speed Thermo-System Year 2007 - Serial-No. 1369 Arbeitsbreite / Working width max. 850mm Elektrischer Anschluss / Power supply: 400V / 50Hz / 40A Godpfx Ao Aikfvscmskd Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, This listing is for a Thermo Fisher Scientific RC 3BP+ Centrifuge The unit is in full working condition and is ready for immediate release. Key Features & Capabilities The RC 3BP Plus is designed for large-batch/volume processing: for example one rotor option handles 6 × 1 000 mL bottles or 12 blood-bags. Gjdpfx Aoxukh Eecmskd Maximum speed of up to 5 000 rpm, producing a maximum relative centrifugal force (RCF) of about 7 277 ×g. Refrigeration/temperature control: The unit offers temperature setting range roughly from –10 °C to +40 °C (or around +2 °C to +40 °C depending on source) and is capable of keeping sample chamber temperature stable. Microprocessor control with programmable run-profiles: 15 stored programs, features such as “Accumulated Centrifugal Effect (ACE)”, Step-Mode runs, slow-start/stop, etc. Quiet & robust operation: Noise level at maximum speed is under ~58 dBA. Safety and build quality: The rotor chamber, baseframe and guard ring are made of high-strength steel; automatic lid lock; electronic imbalance detection; door cannot open during spin; machine cannot start if door open. Technical Specifications (summarised) Here are some of the important specs to consider: Maximum speed: 5,000 rpm. Maximum RCF: ~7,277 ×g. Minimum speed: ~300 rpm. Temperature control range: Approximately –10 °C to +40 °C (or +2 °C to +40 °C depending on spec sheet) for samples. Capacity: 6 × 1 000 mL bottles or 12 × 250 mL blood bags (depending on rotor/adapter). Noise at max speed: < 58 dB(A). Dimensions: Height ~1178 mm (46.3 in), Width ~800 mm (31.5 in), Depth ~905 mm (35.6 in) (varies by version). Dimensions: Height ~1178 mm (46.3 in), Width ~800 mm (31.5 in), Depth ~905 mm (35.6 in) (varies by version). (≈981 lb) Drive: high-performance induction motor Intended Usage & Applications This centrifuge is suited for laboratories that need to process large volumes and relatively low speeds (compared with ultra-centrifuges). Some typical uses include: Blood banking/separation of large bag volumes. Bulk processing of bottles (1 L size) for sample prep. Applications where sample temperature control is important (hence the refrigeration). Labs requiring strong reproducibility via programmable runs, slow-start/stop, step modes

Condition: excellent (used), mileage: 772,121 km, power: 175 kW (237.93 HP), first registration: 06/2016, fuel type: diesel, axle configuration: 4x2, wheelbase: 5,800 mm, fuel: diesel, color: other, driver cabin: day cab, gearing type: automatic, emission class: euro6, total length: 9,950 mm, total width: 2,600 mm, loading space length: 7,600 mm, loading space width: 2,500 mm, loading space height: 2,400 mm, Tail lift: dhollandia, 2500 kg WDB96300310052872 Cool unit brand: Thermo King = More information = General information Year of construction: 2016 Registration number: 62-BHJ-3 Technical information Number of cylinders: 6 Engine capacity: 7.698 cc Weights Empty weight: 11.610 kg Carrying capacity: 7.390 kg GVW: 19.000 kg Functional Cooling engine: diesel and electric Condition Technical condition: very good Visual appearance: very good = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Gksdpfszpyh Dsx Acmod Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Year of construction: 2010, operating hours: 3,037 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 139737, Multivac R-145 thermoformer from 2010, in excellent condition and recently removed from production. It can be used for both soft and hard film. Film width: 420 mm. Includes 4 moulds: No. 1: 375 x 184 mm, maximum depth 100 mm. No. 2: 355 x 187 mm, maximum depth 65 mm. No. 3: 1:2, 132 x 95 mm. No. 4: 1:3, 190 x 110 mm. Built-in vacuum pump and MAP machine. Gedpfx Asz I Dfzjcmjkd

Condition: excellent (used), mileage: 1,262,910 km, power: 169 kW (229.78 HP), first registration: 03/2007, fuel type: diesel, axle configuration: 4x2, wheelbase: 4,700 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: semi-automatic, emission class: euro4, total length: 8,720 mm, total width: 2,600 mm, loading space length: 6,530 mm, loading space width: 2,460 mm, loading space height: 2,490 mm, Equipment: ABS, air conditioning, cruise control, electric window regulation, power mirror, = Additional options and accessories = Gkjdpfeymr Apox Acmod - Air suspension - High Beams - iso tray - Leaf spring - Radio/Cassette player - Radio/CD player - Speed limiter - Sun visor = Remarks = Tail lift: Yes XLEP4X20005164884 Cool unit brand: Thermo King = More information = General information Year of construction: 2007 Registration number: BS-TT-70 Technical information Number of cylinders: 5 Engine capacity: 8.867 cc Front axle: Steering Weights Empty weight: 9.650 kg Carrying capacity: 8.950 kg GVW: 18.600 kg Functional Make of bodywork: thermo king MD-200 Cooling engine: diesel and electric Condition Technical condition: very good Visual appearance: very good = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: excellent (used), mileage: 273,024 km, power: 265 kW (360.30 HP), first registration: 10/2014, fuel type: diesel, fuel: diesel, color: other, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, loading space length: 8,000 mm, Trailer Height: 260 cm Tail lift: Yes WJMA1VPH60C295056 Cool unit brand: Thermo King = More information = Year of construction: 2014 Empty weight: 9.700 kg Carrying capacity: 10.300 kg GVW: 20.000 kg Cooling engine: diesel and electric Technical condition: very good Visual appearance: very good Registration number: EEB48 = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam Gsdjymp I Nopfx Acmekd IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: used, This listing is for the Thermo Scientific ClearVue Coverslipper The units are in full working condition and are ready for immediate use Gkjdpfx Aeyt Ilaocmsd The Thermo Scientific ClearVue Coverslipper is an automated, high-throughput system designed to streamline slide preparation in pathology and histology laboratories. It is engineered to deliver high-quality, consistent results with minimal manual intervention Key Features and Performance - High Throughput: The system can process up to 250 slides per hour. It can handle up to 11 slide baskets simultaneously through a load-on-demand system. - Specimen Recognition: The system automatically identifies the type of slide preparation (histology vs. cytology) and adjusts the mountant volume. - Stainer Compatibility: It is compatible with various slide stainers, including:Thermo Scientific Varistain Gemini ES and 24-4. - Sakura Tissue-Tek DRS 2000 series. - Leica Auto-Stainer - Pre-loaded Hoppers: The system uses pre-filled coverslip hoppers (holding 500–575 slips) to reduce glass handling and prevent contamination or fingerprints. - Optical Recognition: Sensors ensure proper slide positioning. The system uses vacuum and pressure to mount the cover glass accurately without bubbles

Condition: used, mileage: 48,637 km, power: 130 kW (176.75 HP), color: white, gearing type: automatic, loading space length: 57,200 mm, loading space width: 24,900 mm, loading space height: 22,000 mm, Equipment: ABS, air conditioning, power assisted steering, For inquiries regarding the vehicle, please contact Mr. Seidel (at telephone number). Mercedes-Benz Atego 818 L refrigerated box van + tailgate lift. Gedpfx Acszlbagemskd Tailgate lift: Dautel DL 1000 L (1,000 kg), refrigerated unit ThermoKing V-600 Max, temperature recorder, A1M front axle, 4.1 t, A2B rear axle, crown wheel 325, hypoid, 6.2 t, A2Z rear axle differential lock, A5L axle ratio i = 3.417, B1B electronic braking system with ABS and ASR, B1C electronic compressed air supply unit, low, B1F heater, electronic compressed air supply unit, B2A disc brake, on front and rear axles, B4A condensate monitoring, for compressed air system, C2J wheelbase 4220 mm, C5I fastening parts, for platform body, C6A steering ZF 8090, C6Y stabilizer, under frame, rear axle, C7M protective device, lateral, weight-optimized, C9Y deletion of rear underrun protection (ECE), D1C driver's air-suspended seat, comfort, D1M passenger's fixed seat, simple, D2V armrests, on both sides, driver's seat, D2Y seatbelt control, D3Q seat cover, velour, D4B classic cockpit, D4W power windows, on both sides, D5Y rubber floor mats, driver and passenger side, D6F air conditioning, D6Y pollen filter, D7L storage compartment, above windshield, 1 compartment, D8A roof hatch/ventilation flap, roof, E0F batteries, Exide, E0Y battery cover, E1H batteries, 2 x 12 V/165 Ah, maintenance-free, E1N generator 28 V/100 A, E4C additional functions, for body manufacturer, E5A switch No. 1 for external body electrical system, E6Z reversing warning, E7F cable remote control for air suspension, E9H pre-installation for tailgate lift control, F1X S cab ClassicSpace, 2.30 m, tunnel, F5L external sun visor, transparent, F6I front mirror, heated, F6J main mirror, electric, driver's side, F7W cab entry, single-step, F8E locking system, with central locking, F8F comfort locking system, F8V light sensor, F8W rain sensor, F9A pre-installation, cab parts, body width 2600 mm, G0K driving program economy/power, G1D transmission G 90-6/6.70-0.73, G5G Mercedes PowerShift 3, I0E tires tubeless, 215/75 R 17.5 front/front-outer axle, I4A wheel formula 4x2, I5Q 7.5-ton truck, I6A platform chassis, I6X air suspension, rear axle, J1H instrument panel, 12.7 cm, J1O tachograph digital, 2nd generation, ADR, J1S tachograph manufacturer VDO, J3N Fleetboard Eco Support, J3V Truck Data Center 7, J4X seatbelt warning, with seat occupancy detection passenger side, J5S radio, with USB connection and Bluetooth, J8Y pre-installation for Truck Data Center 7, J9D pre-installation for toll collection, K0E plastic tank 120 l, left, K3T AdBlue tank 25 l, K5M tanks, lockable, K5S protective cap for AdBlue dosing system, K7I exhaust system, on frame right, tailpipe to the inside, L0A lighting regulations, according to UN-R 48.06, L0Y rear lights wiring harness, extended, L1B daytime running lights, L2H side marker lights, flashing, L9D pre-installation, additional turn signals, M0S noise encapsulation, according to ECE, M1I engine OM934, R4, 5.1 l, 130 kW (177 hp), 750 Nm, M4X engine version Euro VI, E, M5V High Performance Engine Brake, M8Z fuel preheating, O1N Off-Line FHS attachments, O1X integration of CLCS TL function in ASAM, P0L tailgate lift preparation, Atego, Q1C front suspension 3.4 t, parabolic, R0Z wheel nut cover, R1A steep shoulder rims 6.00 x 17.5, S1D stability control assistant (ESP), S1H lane keeping assist, S1P Active Brake Assist, S5A speed limiter 90 km/h / 56 mph, ECE, S5Z cruise control, T0G weight variant 7.49 t (3.4/4.

Condition: good (used), mileage: 310,592 km, power: 184 kW (250.17 HP), first registration: 02/2019, fuel type: diesel, tire size: 285/70R29.5, axle configuration: 4x2, fuel: diesel, color: white, gearing type: automatic, emission class: euro6, suspension: air, permissible axle load (axle 1): 5,800 kg, permissible axle load (axle 2): 10,900 kg, loading space length: 7,650 mm, loading space width: 2,450 mm, loading space height: 2,350 mm, Equipment: ABS, AdBlue, cruise control, onboard computer, tail-lift, = Additional Options and Accessories = - Cabin - Air suspension = Further Information = General Information Year of construction: 2019 Axle Configuration Suspension: Air suspension Front axle: Tire size: 285/70R29.5; Max. axle load: 5800 kg; Steerable; Tire tread depth left: 70%; Tire tread depth right: 70% Rear axle: Tire size: 285/70R19.5; Double tires; Max. axle load: 10900 kg; Tire tread depth left inner: 70%; Tire tread depth left outer: 70%; Tire tread depth right inner: 70%; Tire tread depth right outer: 70% Gjdozwmugopfx Acmjkd Weights Unladen weight: 9,400 kg Payload: 6,600 kg GVW: 16,000 kg Functional Tail lift: BAR, Rear door Cooling: 20 °C to 20 °C Body manufacturer: Thermoking T-1200R Condition Technical condition: good Optical condition: good

Condition: excellent (used), mileage: 386,183 km, power: 120 kW (163.15 HP), first registration: 11/2016, fuel type: diesel, wheelbase: 4,330 mm, fuel: diesel, color: other, driver cabin: day cab, gearing type: automatic, emission class: euro6, number of seats: 2, total width: 2,020 mm, permissible axle load (axle 1): 1,860 kg, permissible axle load (axle 2): 2,250 kg, loading space length: 4,230 mm, loading space width: 1,850 mm, loading space height: 1,850 mm, V540BR Cool unit brand: Thermo King = More information = General information Year of construction: 2016 Registration number: V-540-BR Technical information Number of cylinders: 4 Engine capacity: 2.143 cc Max. front axle load: 1860 kg Max. rear axle load: 2250 kg Weights Empty weight: 2.690 kg Carrying capacity: 910 kg GVW: 3.500 kg Max. towing weight: 5.500 kg Condition Technical condition: very good Visual appearance: very good = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Gkodpjymrb Ejfx Acmjd Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: good (used), mileage: 416,794 km, power: 206 kW (280.08 HP), first registration: 03/2015, fuel type: diesel, tire size: 265/70R19.5, axle configuration: 4x2, fuel: diesel, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, loading space length: 6,430 mm, loading space width: 2,480 mm, loading space height: 2,590 mm, Equipment: ABS, AdBlue, cruise control, spoiler, tail-lift, = Additional Options and Accessories = - Aluminum fuel tank - Leaf spring suspension - Roof spoiler - Air suspension - Reversing camera - Sun visor = Notes = Iveco Eurocargo 120.250 4x2 - Thermoking T-800R Frigo - Loadlift - Euro 6 - Automatic Year of Manufacture: 31-3-2015 Mileage: 416794 ZCFA71EJ302646721 Box dimensions: 6.43 - 2.48 - 2.59 Thermoking T-800 R Frigo Diesel/electric Zepro loadlift Automatic gearbox Euro 6 Camera system Refrigeration unit brand: Thermo King = Further Information = General information Year of construction: 2015 Axle configuration Tire size: 265/70R19.5 Front axle: Steered; Tire tread left: 50%; Tire tread right: 50%; Suspension: Leaf spring suspension Rear axle: Dual tires; Tire tread left inner: 80%; Tire tread left outer: 80%; Tire tread right inner: 80%; Tire tread right outer: 80%; Suspension: Air suspension Weights Unladen weight: 9,400 kg Payload: 6,590 kg GVW: 15,990 kg Functional Tail lift: Rear tailgate Cooling: 20 °C to 20 °C Body brand: Thermoking Gsdozzq N Nopfx Acmjkd Condition Technical condition: good Optical condition: good Further information Please contact VAEX The Truck Traders for further information.

Condition: used, This listing is for the Thermo Scientific Multifuge Pro Centrifuge Series The units are in full working condition and are ready for immediate use Gkjdpoyt Naxsfx Acmjd The Thermo Scientific™ Multifuge™ Pro Centrifuge Series (including the X4R refrigerated model) is a high-performance, versatile laboratory centrifuge designed for high-capacity, general-purpose processing. Featuring a 4-liter capacity, these units are ideal for cell culture, blood separation, and microbiologyKey Features: - Auto-Lock™ Rotor Exchange: Tool-less, push-button rotor exchange for fast application changes in under 3 seconds. - Intuitive Interface: A full-color touch screen provides easy, rapid programming, with storage for up to 100 programs. - Versatility & Capacity: Compatible with up to 18 different rotors (swing-out and fixed-angle) with a maximum speed of 15,200 rpm (up to 25,830 x g). - Sample Protection: ClickSeal™ biocontainment lids provide certified, glove-friendly, snap-on sealing for safety. - Efficient Design: The X4R refrigerated model includes a powerful cooling system for temperature-sensitive samples, with a range of -10°C to +40°C. - SMARTSpin™ Technology: Advanced rotor management optimizes acceleration, braking, and residual load imbalance.

Condition: used, Vötsch Temperature shock chamber / Thermal shock chamber Vötsch ShockEvent T/120/V2 temperature shock chamber Hot chamber up to +220 °C / Cold chamber up to -80 °C Workshop-checked – water-cooled version with 120-liter test chamber volume For sale is a used temperature shock chamber from the manufacturer Vötsch Industrietechnik GmbH. The temperature shock chamber is suitable for thermal cyclical testing, environmental simulation, material testing, quality assurance, electronics and component testing, as well as development, aging and stress tests. The system has a hot chamber and a cold chamber. The test item is transported between the two temperature zones using a mobile test trolley. This allows for rapid temperature changes to test the thermal resistance. Technical data: Manufacturer: Vötsch Industrietechnik GmbH Gkjdpfx Ae Ah Shwecmsd Type: ShockEvent T/120/V2 Device type: Temperature shock chamber / Thermal shock chamber Year of manufacture: 2018 Hot chamber: up to +220 °C Cold chamber: up to -80 °C Two-chamber temperature shock system Humidity control: not available Water-cooled version Temperature data according to manufacturer's brochure: Hot chamber: +50 °C to +220 °C Cold chamber: -80 °C to +100 °C Temperature change by transporting the test item between the hot and cold chambers Temperature change rates according to manufacturer's brochure: Heating rate, hot chamber: approx. 18 K/min Cooling rate, cold chamber: approx. 7.5 K/min Refrigerant 1: R449A Refrigerant quantity: 1.70 kg Max. low pressure: 22.5 bar g Max. high pressure: 25 bar g Refrigerant 2: R23 Refrigerant quantity: 1.30 kg Max. low pressure: 22.5 bar g Max. high pressure: 25 bar g Standby pressure: 14 bar g Power connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated power: 10 kW Rated current: 25 A Test chamber volume: 120 liters Internal dimensions (H × W × D): 410 × 470 × 650 mm External dimensions (H × W × D): 2,450 × 1,000 × 2,530 mm Weight: approx. 1,000 kg Dimensions and weight according to manufacturer's brochure for the basic unit of the T/120/V2 model series. Deviations due to equipment features are possible. Equipment: Two separate temperature chambers Hot chamber and cold chamber Mobile test item trolley Digital control and operating unit Temperature control Water-cooled version Cooling water connections for supply and return Temperature shock operation Temperature change between hot and cold chambers Electrical connection: 400 V / 50 Hz Refrigeration system with R449A and R23 Temperature monitoring Test item support in the mobile trolley Application areas: Temperature shock testing Thermal cyclical testing Environmental simulation Material testing Electronics testing Component testing Assembly testing Sensor testing Quality assurance Research and development Service life testing Aging and stress tests Condition: Used Optical condition according to pictures Scope of delivery: 1x Vötsch ShockEvent T/120/V2 temperature shock chamber Accessories according to pictures The table shown in the photos, or any other items not explicitly mentioned, are not part of the sale. Shipping or freight transport possible. Subject to changes, errors and prior sale. We will be happy to answer any further questions by telephone.

Condition: used, This listing is for the Thermo Scientific A8150001 Gemini AS Heated Slide Stainer The unit is in full working condition and is ready for immediate use The Thermo Scientific Gemini AS Automated Slide Stainer (Model A81500001) is a high-performance staining system designed for histology and pathology laboratories requiring reliable and reproducible slide preparation. This automated staining instrument simplifies laboratory workflows by processing multiple slide racks simultaneously while maintaining consistent staining quality. The A81500001 model includes integrated heated stations, allowing slides to be dried efficiently during staining protocols. The Gemini AS supports a wide range of histological staining procedures and can be programmed for customised protocols, making it suitable for routine staining as well as specialised laboratory applications. Its high capacity and flexible configuration make it ideal for laboratories handling moderate to high sample volumes. With multiple reagent stations and automated timing control, the system reduces manual handling and ensures consistent staining results, improving overall laboratory productivity. Key Features Gkedsyuylhopfx Acmod Automated slide staining system for histology laboratories 5 heated stations for slide drying Capacity for up to 12 slide racks Each rack holds up to 20 slides Up to 26 reagent stations Programmable staining protocols Consistent and reproducible results Ideal for pathology, research, and clinical laboratories

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, Walk-in temperature chamber for testing, trials, or production processes Temperature range: +40°C to +80°C with a control accuracy of +/- 1°C Air conditioning via recirculation air handling unit (approx. 3000 m³/h) and electric heating, approx. 6 kW External dimensions: 4800 x 3200 x 2430 (depth, width, height in mm) Internal dimensions: 4560 x 2960 x 2160 (depth, width, height in mm) Chamber area: approx. 13.5 m² Gedszpy Idspfx Acmjkd Chamber volume: approx. 29.2 m³ Equipment: - Door with a width of 1200 mm and a height of 2000 mm, with a pre-installed ramp for convenient loading - Viewing window in the door - Floor elements made of 1.5 mm non-slip stainless steel tread plate, glued onto a 15 mm thick, water-resistant laminated pressure distribution plate. Slip resistance class R11. Permissible wheel load: 2500 N - High-quality insulation with 120 mm polyurethane high-temperature foam, U-value according to DIN EN 13165: 0.17 W/m²*K - Temperature-resistant LED ceiling lighting - Temperature-resistant cable duct on the right and left sides with a total of 6 230V sockets - Siemens S7-1200 control system and 7" color touch panel - Integrated PID control for temperature - Recording and graphical display of the temperature profile - Plain text display of fault messages and history tracking, as well as password protection - Potential-free switching contacts for alarm forwarding Electrical connection: AC400V / 3Ph/N/PE / 50 Hz The system can be inspected by arrangement. The buyer must dismantle and remove the system. As the operating location has been closed, no assistance with logistics can be provided.

Condition: used, This listing is for a Thermo Fisher Scientific Sorvall RC6+ Centrifuge The unit is in full working condition and is ready for immediate release. The Sorvall RC 6 Plus is a high-speed, refrigerated floor-standing centrifuge designed for large-volume separations in research, bioprocessing or production labs. According to the manufacturer, it: Is capable of speeds up to 22,000 rpm (which corresponds to about 55,200 ×g) without needing a vacuum system. Handles up to 4 × 1,000 mL bottles in a single run (i.e., ~4 L total) in its standard configuration. Uses a brushless high-frequency motor drive, and has full refrigeration for temperature control. Gedpfx Acoxukkyjmokd Offers a broad rotor compatibility platform (including composite, aluminium, continuous flow etc) for different In short: this is a heavy-duty centrifuge for larger volumes and higher speeds, suited to labs that need more capacity and performance than benchtop or mid-range units. Key Features & Highlights Here are some of the standout features: Speed & G-force: Up to 22,000 rpm, approx. 55,200 ×g. Capacity: 4 bottles of 1,000 mL (4 L total) in typical configuration. Temperature control: Ability to set in range from -20 °C to +40 °C (in 1 °C increments), and maintain temperature accuracy of ±2 °C. Motor/drive: Brushless high-frequency motor = faster spin up/downs, lower maintenance than older belt drives. Programmability & control: Up to 30 stored programs, with features like real-time control (delayed start/stop), ω² dt (integrator) for reproducibility, pre-cool function, and both rpm and RCF display. Safety & interlocks: Automatic lid-lock when running, door cannot be opened while rotor is spinning, and run terminates automatically in the event of certain malfunctions. Rotor flexibility: Supports a wide selection of rotors (fixed-angle, swinging bottle/bucket, continuous flow), including composite carbon-fibre rotors for higher performance / durability

Condition: used, empty load weight: 8,000 kg, maximum load weight: 29,010 kg, overall weight: 39,000 kg, first registration: 01/2015, loading space length: 13,330 mm, loading space width: 2,511 mm, loading space height: 2,626 mm, loading space volume: 87.9 m³, total length: 2,550 mm, total height: 4,000 mm, fuel type: diesel, fuel: diesel, Equipment: ABS, EBS, cooling unit, had accident, Key features Internal reference: 26469M Chassis number: WSM Serial number: 411.827.719 Vehicle model: SCB S3B Vehicle brand: Schmitz Product category: Refrigerated box Condition: Used Date of first registration: 01/22/2015 Last inspection date: 07/14/2025 Fuel: Diesel General vehicle condition: used Hydraulic system: None Cab Vehicle equipment: ABS, EBS Number of seats: 2 Axles & Tires Axle 1: 385/55 R22.5/10mm, disc brakes, air suspension Axle 2: 385/55 R22.5/5mm, disc brakes, air suspension Axle 3: 385/55 R22.5/10mm, disc brakes, air suspension Number of axles: 3 Weights & Dimensions Gross vehicle weight: 39 Payload: 29010 Unladen weight: 8 Vehicle height: 4 Vehicle length: 2550 Towing capacity: 14 Body Body manufacturer: Schmitz Body model: Refrigerated box Body interior dimensions (l x w x h): 13330x2511x2626 Body manufacturing year: 2014 Refrigeration unit Refrigeration unit brand: Thermo King Cooling capacity (temperature): 30 Monitoring: Yes Godpfx Ace Agcq Hsmekd Zones: 2 Refrigerated transport capable: Yes