Temperature shock chamber

Nema NCG 4390 S

Condition: refurbished (used), Complete Cutting Machine Group from LINCK: 1.Pre-cut feed table Linck EV20 (condition:good) 2.Chipper canter LinckV18 (condition: good) Lhedpfx Ahjrvh Tms Esc 5.Boad separator unit Linck SE (condition: refurbished) 1. EV20- Pre-cut feed table Linck EV20 for smaller logs. Hydraulic unit is included. 2. Chipper canter LinckV18. 2x85 KW motor with direct drive. Completely refurbished set. We can also offer full electrical installation and assembly of line on site.

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, cooling capacity: 800 kW (1,087.70 HP), overall weight: 4,500 kg, Equipment: compressor, freezer, Refrigeration machine with 2x dry coolers Lederzq Arjpfx Ah Eshc Cooling capacity: max 800 kW Number of cooling circuits: 2 Refrigerant type: R134A Voltage: 400 V Absorbed power: 176 kW Year of manufacture: 2009 2 Trane CHHP0N2TKG0N134A semi-hermetic screw compressors, shell and tube as evaporator, 2x oil separators, Guentner GBV 200 Evaporator TRANE EG 340 evaporator water concentration 560 liters Control cabinet 1x air-cooled condenser machine weight: 4500kg With dry coolers 1x Güntner GWH 090.1D/5-M PT: 30.8 bar PS: 28 bar The specified cooling capacity is at a water outlet of +7°C at a condensing temperature of +40°C.

Condition: new, TECHNICAL DATA Gas-fired preheating furnace, make VEI Lodpfx Ahofbgz Ie Eehc type: VEI_KO_V_GB_400-350 temperature: 350°C burners power: 2 x 200 kW fans: 2 x 4 kW useable dimensions x 2 (h x d x w): 1.000 x 1.400 x 2.800 mm

Condition: good (used), Year of construction: 2010, functionality: fully functional, Corner cutting module Lhedpfeuxn H Iex Ah Eoc with its electrical panel

Year of construction: 2003, condition: reconditioned (used), longitudinal saw for cutting boards 4 meters main engine 400V, 7.5kW - blade feed motor 400V, 2.2 kW - extending the pneumatic saw - working pressure 6bar - cutting length 4020 mm Ljdpfx Ahehbp T Se Eehc - cutting height approx. 170mm - machine length 5.5 m - machine width 1.6 m

Condition: excellent (used), Year of construction: 2020, Euro pallet production machine Capacity - approx. 500 pallets per shift Lsdpfx Ahoulfk Aj Ejhc Still installed. Production is stoped.

Condition: like new (used), Year of construction: 2021, functionality: fully functional, saw blade diameter: 600 mm, cutting height (max.): 180 mm, feed length X-axis: 3,200 mm, The KP 900 EasyCut cut-off saw is a suitable solution for companies that process solid wood and place maximum emphasis on the quality and yield of their production. It is used to cut out defects and optimize lengths. On average, up to 900 bm/hour can be processed on this saw. (for material with a length of 4 m with 8 cuts). The saw can be operated by one or two workers, depending on the nature of the processed material. The optimization saw KP 900 EasyCut is suitable for production, which is focused on cutting accuracy, minimization of cargo waste, speed but also safety of work. The advantage of the machine is a high degree of flexibility in the input and output dimensions of the processed material. Controlling the saw is intuitive and special software facilitates programming and entering cutting parameters. KP 900 EasyCut has extended mechanization options at the output. Device functions Lodpsv Iz Rnofx Ah Ejhc Length optimization The function consists in minimizing waste and maximizing the yield of the assortment. The inserted material is optically scanned by the binder and automatically precisely laid out on the cross-section of the specified lengths of the selected program. The optimization system then always prioritizes the cut of the longest specified length that fits into the inserted material. The saw automatically measures the length of each inserted piece, so it is not necessary to sort the material in advance by size. In the case of marked defects, the material is optically divided into individual pieces by the binder (from defect to defect) and these pieces are again separately optimized for length. If the cut part does not meet the length of the smallest length in the program, it goes to waste. Automatic front and back cropping can be set in the selected program. Qualitative optimization - waste The essence of this function is that the operator performs a visual assessment of the cut piece and marks with two perpendicular lines the places with defects that must be cut out with special chalk. By moving the binder with special optics over the cut material, the current positions (chalk strokes) of the necessary cuts are recorded. The resulting parts in different lengths (from defect to defect) are automatically length-optimized and cut to the required lengths using the software according to the cutting program. If the cut part does not meet the length of the smallest length in the program, it goes to waste. Automatic front and back cropping can be set in the selected program. Solid and massive construction with a robust cover of the cutting area guarantees high work safety. Quality of individual components, material and processing ensures trouble-free operation of the equipment and a long service life in demanding working conditions. Material flow In the basic design, the saw is LEFT oriented, i.e. material flow is from right to left. Automatic loading system is a combination of sophisticated printing equipment and optics. The system is an integral part of the entrance table. It moves along a precise linear rail with bearings and ensures very precise positioning of the workpiece in the cut (up to ±0.1 mm). Thanks to the optical integrated system, the loader reads the length of the material, marked defects and quality. Clear touch 15" display

Year of construction: 2011, condition: like new (used), functionality: fully functional, Buse SF 150 shock freezing cabinet year of manufacture 2011. Cooling media nitrogen / Co 2. 3x high speed fans, Jumo Imago 500 control panel. Lhodpfx Aoyifl Toh Eoc Maximum size trolley Wide 110 cm Deep 130 cm High 210 cm.

Condition: new, functionality: fully functional, Capacity: from approx. 200 up to over 2,000 EPAL pallets (1.2 × 0.8 × 0.15 m) Product description: The Superplan is a professional system for drying and heat‑treating pallets in full compliance with the ISPM‑15 standard, ensuring proper sanitization for export. Designed to handle any type of wood, it reliably achieves a core temperature of 56 °C for at least 30 minutes, guaranteeing the elimination of pests and pathogens in accordance with international regulations. Available heating options: - Gas - Electric - Hot water / steam Its modular design allows for front loading or tunnel configurations, optimizing hot‑air circulation and improving thermal efficiency through controlled internal ventilation and dedicated core‑temperature sensors. Key benefits: - Variable capacity: from 200 up to over 2,000 EPAL pallets per cycle. - Guaranteed compliance with ISPM‑15 export requirements. - Flexible heating options: gas, electric, or steam/hot water. - Energy‑efficient with precise ventilation control and core‑temperature monitoring. - Robust and adaptable: ideal for high‑productivity industrial operations. Superplan is built for pallet manufacturers and wood processors exporting worldwide — combining efficiency, regulatory compliance, and flexible energy options in a single, high‑performance solution. Ledpfsw Hfv Dox Ah Eohc

Condition: used, Year of construction: 2009, We offer a CES LIN industrial cryogenic freezer from 2009. For rapid freezing using LIN (liquid nitrogen). The freezer is ideal for meat, poultry, fish, and bakery plants, as well as for the production of ready meals and convenience foods, where high-quality freezing, preservation of product structure, color, and weight, and minimal juice loss during thawing are important. The device is powered by 3×400 VAC + N + E (50 Hz), with a power of 10 kW, guaranteeing stable, industrial operation. The working chamber with internal dimensions of 2600 x 1100 x 1950 mm allows for the freezing of a wide range of products on trays, nets, in containers or on a conveyor belt, depending on the line configuration. The external dimensions of the freezer, 2850 x 2350 x 2300 mm, make it easy to install the device in an existing production hall. Control is carried out by a PLC system, which enables precise management of process parameters, and the LIN (liquid nitrogen) medium ensures very fast, gentle freezing while maintaining high product quality. Lhjdpjyia Shofx Ah Eec Technical data: Manufacturer: CES Model: CES-BF-LIN-15x24x21-DSWF-E-PT-PLC Year of manufacture: 2009 Type of device: LIN cryogenic freezer (liquid nitrogen) Medium: LIN – Liquid Nitrogen Installed power: 10 kW Power supply: 3×400 VAC + N + E, 50 Hz Weight: approx. 1800 kg Internal chamber dimensions (L x W x H): 2600 x 1100 x 1950 mm External dimensions (L x W x H): 2850 x 2350 x 2300 mm Control: PLC – programmable controller