Used Ham Mold for sale (3,003)

Condition: excellent (used), Year of construction: 2006, clamping force: 500 kN, screw diameter: 22 mm, clearance between the columns: 355 mm, overall weight: 2,700 kg, Clamping force: 50 t Year of manufacture: 2006 Injection unit .../200 Screw diameter: 22 mm Specific injection pressure: 2800 bar Injection volume: 41.8 ccm Mould clamping system 50/... Clamping force: 50 t Mould plate dimensions: 520 x 520 mm Tie bar clearance: 355 x 355 mm Mould height: 210 mm Opening stroke: 400 mm Maximum platen distance: 610 mm Weight: 2700 kg Dimensions (m) L x W x H: 3.8 x 1.1 x 2.1 m Rcedpszt Ih Tofx Akijh Control: NC4

Condition: excellent (used), Year of construction: 2021, operating hours: 14,600 h, functionality: fully functional, machine/vehicle number: 248760, clamping force: 40,000 kN, screw diameter: 70 mm, displacement volume: 1,212 cm³, injection pressure: 1,650 bar, injection weight: 1,030 g, mold height (min.): 450 mm, ejector force: 964,000 N, ejector stroke: 250 mm, opening stroke: 1,000 mm, plate length: 1,450 mm, plate width: 1,200 mm, plate height: 1,100 mm, installation height: 3,650 mm, total length: 7,740 mm, total width: 2,340 mm, total height: 2,300 mm, overall weight: 25,600 kg, heating capacity: 29 kW (39.43 HP), pressure: 200 bar, number of injections: 1, pump power: 56,000 W, power: 118 kW (160.44 HP), type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, input current: 213 A, Equipment: documentation/manual, The machine has few operating hours and is in very good condition, having been well-maintained. The machine comes with a Viper12 robot, which was originally supplied with it and can be seen in the accompanying photos. The robot’s control system is not integrated with the machine, so the robot can be removed and used separately, or another robot can be installed in its place. The machine has three air valves and two hydraulic valves, Euro map signals, and a signal for the dispensing unit’s rotation speed. The machine also has a strip guard, which is not included but can be arranged separately. The extruder’s heating elements are insulated with thermal insulation. Due to the guard, the machine can operate with the rear door open. It also has a water tank with 8 zones and two additional blocks with 8 outlets each. The machine has 8 zones for heating the tooling. Only PS material has been injection molded on this machine. Rcjdpfxezqbk No Akish

Condition: excellent (used), Year of construction: 2011, operating hours: 55,806 h, functionality: fully functional, clamping force: 1,500 kN, screw diameter: 45 mm, total length: 4,700 mm, total width: 1,700 mm, total height: 2,000 mm, overall weight: 4,850 kg, For sale is an Arburg injection moulding machine, model 470 C 1500-400. The offer includes Arburg handling, type Multi Select Axis X/Y/Z 600/600/1400 mm. The machine is in excellent condition and ready for immediate use. Technical data: Year of manufacture: 2011 Clamping force: 1,500 kN Tie bar spacing: 470 x 470 mm Mounting plate: 650 x 650 mm Operating hours: 55,806 h (pump) Injection unit: Ø 45 / SP 400 Shot volume: approx. 254 cm³ Shot weight: approx. 232 g Injection pressure: up to 1,580 bar Rcjdpfx Akow E Itieioh Dimensions: approx. 4,700 x 1,700 x 2,000 mm Weight: 4,850 kg Transport and loading can be organized Europe-wide upon request (at extra cost). All prices plus VAT. Inspection possible by appointment. Please contact us – our team will be happy to assist you. Trade-in or exchange possible! Machinery Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you want to sell yours? For more information or contact options, please visit our website.

Condition: like new (used), Year of construction: 2004, operating hours: 69,000 h, functionality: fully functional, clamping force: 1,100 kN, screw diameter: 45 mm, Engel Victory 500/110 Tech Horizontal injection moulding machine with 110 tons clamping force, brand Engel, model Victory 500/110 Tech. Year of manufacture: 2004. Approx. 69,000 automatic operating hours. Includes a fully equipped production cell: ENGEL ERC 43/1-EA Robot (2004), conveyor belt, and safety fencing. The injection moulding machine is delivered RE-conditioned by our expert technical team and in optimal working condition. We can offer our customers on-site commissioning service, ensuring proper machine operation upon installation completion. Technical Details: Screw diameter: 45 mm Year of manufacture: 2004 Operating hours: 69,000 Rcodpfjw Hbiaox Akioh Opening stroke: 507 mm Injection volume: 318 cm³ Injection pressure: 1016/(1603 increased) bar Maximum distance between platens: 800 mm Minimum/Maximum mould thickness: 300 mm (min) / 500 mm (max) Platen dimensions: 740x680 mm

Condition: excellent (used), Year of construction: 2011, Krauss Maffei KM 50 - 100 AX injection molding machine Electric injection molding machine Year of production - 2011 Working hours 47799 Operator language: German, Romanian, Czech Closing unit Rcedpfx Akev Hxgqjijh - Mold closing force: kN 500 - Mold opening force: kN 39.9 - Dimensions of the mounting plate (hxv): mm 510 X 460 - Distance between columns (hxv): mm 410 X 360 Injection unit - Screw diameter: mm 25 - Injection pressure: bar 2025 - Injection volume: cm3 49 - Injection weight for PS: g 45 Dimensions and weight - Net weight with control cabinet: t 3.9 - Machine dimensions (length x width x height): m 4.13 x 1.6 x 1.8

Condition: good (used), Year of construction: 2001, functionality: fully functional, clamping force: 1,300 kN, screw diameter: 35 mm, clearance between the columns: 850 mm, ejector stroke: 575 mm, plate width: 650 mm, plate height: 650 mm, For sale is an Arburg 470 S 1300-675 injection molding machine. Technical specifications: Year of manufacture: 2001 Pump hours: 90,176 Automatic operation: 76,747 Clamping force: 1300 kN Opening stroke: 575 mm Distance between bars: 850 mm Minimum mold height: 275 mm Clamping platen size: 650 x 650 mm Ejector stroke: 175 mm Ejector force forward/backward: 40 Nm Screw diameter: 35 mm 50 mm replacement cylinder available for an additional charge Geiger Handling MiniLiner 3.0 is included in the offer. Transport and loading can be arranged throughout Europe upon request for an additional charge. Redpfx Ajwivkdokisch Prices exclude VAT. Viewings are available by appointment. Contact us; our team will be happy to assist you. Trade-in or exchange possible! Machine Purchase/Sale PURCHASE/SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality, yet affordable metalworking machine for your production? Or do you want to sell yours? For more information or to contact us, visit our website.

Condition: reconditioned (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: X66924, clamping force: 6,600 kN, screw diameter: 115 mm, clearance between the columns: 1,000 mm, displacement volume: 5,349 cm³, injection pressure: 1,800 bar, injection weight: 5,082 g, opening stroke: 1,200 mm, Used Stork IMM 6600EP-8650 injection molding machine. The machine has been overhauled, tested and repaired. Rcjdpewhk Iusfx Akish

Condition: repair required (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: X27054, clamping force: 2,000 kN, screw diameter: 62 mm, Used Stork IMM 2000-1450 injection molding machine. The machine still needs to be tested and repaired. Rcedpfx Akswhlddoish

Condition: used, Year of construction: 2007, functionality: fully functional, machine/vehicle number: X46028, clamping force: 4,400 kN, screw diameter: 84 mm, Used Stork IMM 4400EP-5650-065 injection molding machine. The machine still needs to be tested and repaired. Rcedpfewhmvnex Akieh

Condition: excellent (used), Year of construction: 2010, Krauss Maffei KM 300-2000 CX injection molding machine Year of manufacture: 2010 We offer a high-class hydraulic injection molding machine from the renowned manufacturer Krauss Maffei. The machine is equipped with a modern MC5 control system with a color monitor, an integrated operator panel, and three USB ports. Thanks to its robust construction and high performance, it is perfectly suited for the production of thermoplastic parts. Equipment Fully hydraulic clamping system MC5 control system with color monitor Integrated control panel 3 USB ports Complete plasticizing unit for thermoplastics Ø 70 mm screw made of wear-resistant material Backflow valve Open nozzle Technical data Rcsdpfx Asza Uuzskish Clamping unit Parameter Value Clamping force 3000 kN Mold opening force 169.3 kN Plate movement force – opening 86.3 kN Plate movement force – closing 67.8 kN Dimensions of mounting plates (h × v) 995 × 1050 mm Clearance between columns (h × v) 630 × 630 mm Mold opening stroke 820 mm Minimum mold height 330 mm Maximum opening stroke of plates 1150 mm Ejector stroke 200 mm Ejector force 57.7 / 28.3 kN Injection unit Parameter Value Screw diameter 70 mm Maximum injection pressure 1877 bar Injection volume 1078 cm³ Injection weight (PS) 981 g Injection rate (standard) 385 cm³/s Injection rate (with accumulator) 1155 cm³/s Screw speed 220 / 310 rpm Electro-hydraulic system Parameter Value Pump motor power 55 kW Pump motor power with accumulator 55 kW Heater power 29.2 kW Number of heating zones 6 Number of dry cycles (Euromap 6) 1350 / h Oil tank capacity 720 l Dimensions and weight Parameter Value Net weight 14.5 t Dimensions (l × w × h) 6.5 × 2.2 × 2.3 m

Condition: good (used), functionality: fully functional, Year of construction: 1995, machine/vehicle number: 12 28 895, total height: 2,500 mm, total length: 3,000 mm, total width: 1,000 mm, load capacity: 400 kg, main lifting speed: 8,000 mm/min, fine lifting speed: 33 mm/s, throat depth: 2,800 mm, working height: 2,500 mm, Technical specifications Manufacturer: STAHL Fördertechnik GmbH Type: T202 Load capacity: 400 kg Year of manufacture: 1995 Supply voltage: 380 V / 3-phase / 50 Hz Lifting speed: 8 / 2 m/min Rcedpfx Aezkam Aekijh Motor power: 1.3 / 1.1 kW With pendant control, chain and hook Complete with column-mounted swivel arm STAHL lifting equipment is reliable and durable, even in industrial environments. The T202 model, a 400 kg chain hoist, is known for its lifting speed of 8/2 m/min. Condition Used, industrial equipment in good condition. Sold in the complete condition as shown in the pictures. Price: 1,000 EUR STAHL 400 kg Electric Jib Crane with Electric Chain Hoist – 1,000 EUR Description For sale is a STAHL electric jib crane complete with an electric chain hoist, pendant control and lifting chain. The unit is in good used condition and is ready for operation. STAHL is a well-known German manufacturer of high-quality industrial lifting equipment, recognized for its reliability and long service life. Technical Specifications Manufacturer: STAHL Fördertechnik GmbH Model: T202 Load Capacity: 400 kg Year of Manufacture: 1995 Power Supply: 380 V / 3 Phase / 50 Hz Lifting Speed: 8 / 2 m/min Motor Power: 1.3 / 1.1 kW Electric Chain Hoist Pendant Control Included Lifting Chain and Hook Included Complete Jib Crane Assembly Condition Good working condition Complete unit Ready for installation Industrial quality German equipment Included Electric chain hoist Jib crane Pendant control Lifting chain Hook Price: €1,000 Location: Hungary Seller: Variflux Kft.

Condition: excellent (used), Year of construction: 2008, Min. tool mounting height: 200 mm Max. tool mounting height: 350 mm Rsdpfxszkfd To Akiech Max. opening stroke: 380 mm Screw diameter: 22 mm Clamping force: 800 kN Tie bar spacing: 470 x 420 mm Delivery does not include attachments/accessories. The machine is in very good condition and is powered on.

Condition: excellent (used), Year of construction: 2015, TEDERIC D250/1100 injection molding machine with SW6310S robot Manufacturer: TEDERIC Model: D250/1100 Year of manufacture: 2015 Serial number: D1025/0747 Robot: SW6310S Robot year of manufacture: 2019 Technical specifications Clamping force: 2,500 kN Screw diameter: 55 mm Centering diameter: injection side: 160 mm moving side: 100 mm Column spacing: 580 × 580 mm Minimum mold height: 250 mm Maximum mold height: 600 mm Maximum platen spacing: 1,150 mm Rsdpfxeziiyvo Akioch Maximum opening stroke: 550 mm Injection volume: 601 cm³ Hydraulic ejector: YES Number of hydraulic cores: 2 Cores: on the nozzle side – YES on the closing side – YES programmable – YES Motor power: 31 kW Heater power: 19.7 kW Screw diameter: 55 mm Ejector stroke: 160 mm Screw: bimetallic Machine condition Total operating hours: 79,526 h Automatic operating hours: 40,612 h TEDERIC SW6310S robot (2019) included.

Condition: excellent (used), Year of construction: 2007, Krauss Maffei Injection Moulding Machine KM 110–750 CX Year of manufacture: 2007 Fully hydraulic clamping system. MC5 control system with color monitor, integrated control panel, and 3 USB ports. Plasticizing Unit Complete plasticizing unit for thermoplastics Version with abrasion protection Screw diameter: 40 mm Non-return valve Open nozzle TECHNICAL DATA Clamping Unit Clamping force: 1,100 kN Mold opening force: 70 kN Moving platen force: - Opening: 35.4 kN - Closing: 31.4 kN Platen dimensions (H × V): 745 × 770 mm Rcodpfx Aksx Avhyoieh Tie bar spacing (H × V): 470 × 470 mm Mold opening stroke: 600 mm Mold height (installation): 300 mm Platen opening travel: 900 mm Ejector stroke: 150 mm Ejector force: 22.6 / 9.9 kN Injection Unit Screw diameter: 40 mm Injection pressure: 2,500 bar Injection volume: 251 cm³ Shot weight (PS): 228.41 g Screw speed (standard/option): 295 / 355 rpm Electrical and Hydraulic Equipment Pump motor rated power: 22 kW Installed heater power: 15.62 kW Number of cylinder heating zones: 5 Dry cycle rate (Euromap): 2,000 cycles/h Oil tank capacity: 489 l Dimensions and Weight Net weight with control cabinet: 6.2 t Machine dimensions (L × W × H): 4.9 × 1.6 × 2.1 m

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: X81559, clamping force: 9,000 kN, screw diameter: 115 mm, injection pressure: 1,740 bar, ejector stroke: 300 mm, controller model: CDS700, TECHNICAL DETAILS Clamping Unit Clamping force: 9,000 kN Platen size (H x W): 1,570 x 1,560 mm Tie bar spacing (H x W): 1,010 x 1,010 mm Min. mold height: 300 mm Max. mold height: 1,190 mm Max. opening stroke: 2,290 mm Centerring diameter: 250 mm Ejector stroke: 300 mm Injection Unit Screw diameter: 115 mm Shot volume: 6,232 cm³ Shot weight (PS): 5,733 g Injection pressure: 1,740 bar Max. injection speed: 300 mm/s MACHINE DETAILS Control system: CDS700 Weight of clamping unit: 44,500 kg Weight of injection unit: 20,000 kg Rodpfxsx A At No Akioch EQUIPMENT Pneumatic valves (6 pcs.) Core pulls (1 pc.)

Condition: ready for operation (used), Year of construction: 2014, operating hours: 49,462 h, functionality: fully functional, clamping force: 3,500 kN, screw diameter: 65 mm, injection pressure: 2,070 bar, ejector stroke: 200 mm, controller model: B6P, The toggle lever mechanism has been completely overhauled! TECHNICAL DETAILS Redpfsx A A Akjx Akijch Clamping Unit Clamping force: 3,500 kN Platen dimensions (H x W): 1,030 x 1,140 mm Tie bar spacing (H x W): 710 x 710 mm Minimum mould height: 300 mm Maximum mould height: 710 mm Maximum opening stroke: 1,380 mm Centerring diameter: 160 mm Ejector stroke: 200 mm Injection Unit Screw diameter: 65 mm Shot volume: 1,171 cm³ Shot weight (PS): 1,078 g Injection pressure: 2,070 bar Maximum injection speed: 600 mm/s MACHINE DETAILS Control system: B6P Operating hours: 49,462 h EQUIPMENT Pneumatic valves: 4 units Cores: 2 units Toggle lever mechanism completely overhauled

Condition: good (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 184686, clamping force: 1,000 kN, screw diameter: 25 mm, clearance between the columns: 420 mm, displacement volume: 54 cm³, injection weight: 45 g, For sale is an injection moulding machine from the brand Arburg, model 420 C 1000-150/60. The machine is in excellent technical condition and has been very well maintained. Rcsdpfx Akjx E U Eleijh The machine is offered without peripherals. The rotary table, material feed, temperature control units, and other accessories are not included. Technical data: Year of manufacture: 2001 Clamping force: Clearance between tie bars: 420 x 420 mm Opening stroke: 500 mm Mould installation height: 250 mm Mould mounting plate: 570 x 570 mm Ejector stroke: 175 mm Screw diameter: 25 mm Theoretical shot volume: 54 cm³ Shot weight: 45 g/PS Transport and loading can be organised on request, at an additional cost, Europe-wide. All prices are subject to VAT. Inspection by appointment is possible. Please contact us—our team is happy to assist you. Trade-in or exchange possible! Machinery purchase / sale BUYING / SELLING PRODUCTION & METALWORKING MACHINES AND MORE Are you looking for a high-quality yet affordable metalworking machine for your production? Or are you looking to sell yours? For further information or contact options, please visit our website.

Condition: used, Year of construction: 2021, For sale: 10L jerrycan blow mold + AdBlue spout mold (2-cavity) For sale: industrial blow molds (extrusion blow molding), suitable for the production of plastic containers and accessories. The lot includes: 1) 10-litre jerrycan blow mold Industrial blow mold designed for the manufacture of 10L plastic jerrycans. The mold is complete, in very good mechanical condition, and ready for installation on a blow molding machine. Specifications: - Production of 10L jerrycans - Process: extrusion blow molding - Hardened steel construction - Cavity with integrated handle - Hydraulic/pneumatic closing and guiding systems - Precisely machined surfaces - Previously used in industrial production - Stored on pallet, ready for transport 2) AdBlue spout mold – 2-cavity The lot also includes a 2-cavity mold for the production of AdBlue spouts/nozzles. Specifications: Rcjdpfxjx E U R Ue Akish - 2-cavity mold for AdBlue spouts - Suitable for extrusion blow molding - Robust steel construction - Complete tool, ready for production - Ideal for the manufacture of accessories for jerrycans These molds are ideal for manufacturers of plastic packaging, industrial jerrycans, chemical containers, or AdBlue-related products.

Condition: used, This listing is for a Amersham Biosciences AKTA Purifier 100 / FRAC-950 Fraction Collector Rcjdpfx Aexzgtqskioh

Condition: excellent (used), Year of construction: 2009, operating hours: 78,099 h, functionality: fully functional, clamping force: 1,600 kN, screw diameter: 25 mm, clearance between the columns: 520 mm, displacement volume: 71 cm³, injection pressure: 1,550 bar, injection weight: 65 g, opening stroke: 925 mm, total height: 2,800 mm, overall weight: 10,700 kg, Equipment: documentation/manual, Arburg 520 S 1600 290/70 2K incl. Multilift H – a well-maintained, fully functional 2-component injection molding machine. The machine comes from a top-notch production facility. According to the operator, machine availability was always a top priority: the system was regularly and carefully maintained and operated continuously with additional oil filtration. It is in very good, operational condition and can be put into operation shortly after connection. Equipment and technical highlights: • Year of construction 2009 • 12.3 million cycles / 78,099 operating hours in automatic mode • 2-component version with horizontal injection unit 290 and vertical injection unit 70 • Injection unit 1: screw diameter 25 mm, max. 71 cm³ • Injection unit 2: screw diameter 18 mm, max. 21 cm³ • Opening stroke 925 mm • Electric rotary table • 12-zone hot runner system integrated • 3 x core pull • 2 x blow-out, including control for needle valve • Interfaces for temperature controllers and dryers • Various customer-specific inputs and outputs Including Arburg Multilift H, load capacity 6 kg: • 2 x vacuum • 5 x double-acting grippers • Z-axis servo, 800 mm • C, G, X, and B axes pneumatic Rjdpfjxzix Asx Akiech • Various inputs and outputs, including gripper monitoring The machine is fully functional. Documentation/manual available. An excellent opportunity for a user looking for a well-maintained and immediately usable 2K injection molding machine with automation.

Condition: excellent (used), Year of construction: 2001, machine/vehicle number: 184686, clamping force: 1,000 kN, screw diameter: 25 mm, clearance between the columns: 420 mm, displacement volume: 54 cm³, injection weight: 45 g, opening stroke: 500 mm, For sale is an Arburg injection moulding machine, model 420 C 1000-150/60. The machine is in excellent technical condition and has been very well maintained. Technical data: Year of manufacture: 2001 Clamping force: 1000 kN Tie bar spacing: 420 x 420 mm Opening stroke: 500 mm Redpfx Aksx Itamsijch Mould installation height: 250 mm Mould mounting plate: 570 x 570 mm Ejector stroke: 175 mm Screw diameter: 25 mm Calculated shot volume: 54 cm³ Shot weight: 45 g/PS The machine is offered without periphery. Rotary table, material conveying systems, temperature control units and other accessories are not included.

Condition: good (used), Year of construction: 2003, functionality: fully functional, Clamping force: 150 t. Clamping type: Toggle system. Tie-bar spacing: 470 × 470 mm. Platen size: 700 × 700 mm. Mold height (min–max, approx.): 180–500 mm. Opening stroke: 420 mm. Ejector stroke: 130 mm. Injection volume: 320 cm³. Screw diameter: 42/45 mm (to be confirmed). Heating zones: 4. Machine dimensions: 5000 × 1400 × 2000 mm. Machine weight: 6000–7000 kg. Rcodex Hh U Njpfx Akish

Condition: used, Webomatic Mobile Double Chamber Vacuum Packer Rodoym U Inopfx Akiech Type: CD 120-PR Serial number: 5710JL525 400 V, 3 Ph, 50 Hz, 5.0 A, 2.2 kW Seal length: (2x) 640 mm Dimensions chamber: (2x) 650 mm x 570 mm Busch vacuum pump Total dimensions: 1420 mm x 840 mm x 1060 mm.

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, clamping force: 11,000 kN, screw diameter: 120 mm, injection pressure: 1,758 bar, injection weight: 6,175 g, opening stroke: 2,000 mm, KraussMaffei KM 1100–12000 MX including WITTMANN robot! TECHNICAL DETAILS Clamping force: 11,000 kN Opening force: 770 kN Platen size (H × V): 2,210 × 1,910 mm Tie bar distance (H × V): 1,550 × 1,250 mm Opening stroke: 2,000 mm Tool height (min. - max.): 600 - 1,200 mm Platen stroke: 2,600 mm Ejector stroke: 300 mm Ejector force: 220 / 110 kN Screw diameter: 120 mm Injection pressure: 1,758 bar Shot volume: 6,786 cm³ Shot weight (PS): 6,175 g Screw speed (Standard / Option): 103 / 145 rpm Injection rate (Standard): 1,118 cm³/s Injection rate (Accumulator): 1,696 cm³/s MACHINE DETAILS Electro-hydraulic system Rated power of pump motors: 132 kW Installed heating capacity: 82 kW Number of heating circuits on the cylinder: 7 Rcsdoy T Hd Nspfx Akish Cycle time (Euromap): 802 1/h Oil tank volume: 2,440 l Dimensions & Weight Machine dimensions (L × W × H): 12.47 × 3.65 × 2.82 m Net weight with control cabinet: 73 t EQUIPMENT Robot: Wittmann MC5 control system with color monitor, integrated control panel and three USB ports

Condition: ready for operation (used), Year of construction: 2011, operating hours: 61,666 h, functionality: fully functional, machine/vehicle number: 180299, clamping force: 6,500 kN, screw diameter: 90 mm, column diameter: 175 mm, injection weight: 2,520 g, opening stroke: 1,400 mm, The machine is in excellent condition; all hydraulic hoses were replaced in the fourth quarter of 2024! TECHNICAL DETAILS Clamping force: 6,500 kN Column spacing (H x V): 1,100 x 960 mm Platen size (H x V): 1,510 x 1,440 mm Tool height (min./max.): 650 / 1,150 mm Opening stroke: 1,400 mm Maximum distance between platens: 2,050 mm Maximum tool weight: 11,000 kg Ejector force: 95 kN Ejector stroke: 250 mm Column diameter: 175 mm Injection unit (Unit 5550) Screw diameter: 90 mm Maximum shot volume: 2,740 cm³ Maximum shot weight (PS): 2,520 g Injection pressure (max./boost): 2,180 bar Injection pressure (standard): 1,910 bar L/D ratio of the screw: 20 Screw stroke: 430 mm Maximum screw speed: 148 rpm Rcjdpfx Akjy T Hfyjioh Plasticizing rate: 77 g/s Nozzle pressure force: 150 kN MACHINE DETAILS Control: CC200 Drive and Supply Installed drive power: 90 kW Cylinder heating power: 56 kW Number of heating zones: 6 Hydraulic tank capacity: 1,000 l Installed drive power: 90 kW Operating hours: 61,606 h EQUIPMENT Robot: Viper 40 Key features: 6 hydraulic circuits on the moving platen 2 hydraulic circuits on the fixed platen Cascade valves: 4 pieces (mounted on the fixed platen)