Used Ham Mold for sale (2,990)

Year of construction: 2019, condition: ready for operation (used), A Mepac mold turner for facilitating maintenance and repair work on tool molds is available. Load capacity: 7000kg, rotation angle: 90°, machine dimensions X/Y/Z: approx. 1500mm/1400mm/1000mm, weight: approx. 500kg. Documentation available. An on-site inspection is possible. Nwedpfxjy E S Epj Akisn

Condition: good (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: X66931, clamping force: 6,600 kN, screw diameter: 98 mm, clearance between the columns: 900 mm, displacement volume: 3,885 cm³, injection pressure: 2,100 bar, This machine underwent a complete overhaul and was retrofitted in 2023. Nwjdpfx Akjzlrc Ssijn

Condition: excellent (used), Year of construction: 2014, KRAUSS-MAFFEI KM 420-4300 CX injection molding machine Year of manufacture: 2014 Control system: MC6 Plasticizing unit: 4300 Screw diameter: 90 mm Control system MC6 control system, based on an industrial computer operating with real-time Ethernet technology. Integrated 19-inch control panel with a color touchscreen, LED backlight, and visualization of all running processes via ProcessDesigner. Plasticizing unit Complete plasticizing unit for thermoplastics with abrasion-resistant design. Screw diameter: 90 mm Backflow valve: yes Nozzle: open Nozzle radius: 15 mm Nozzle orifice: 6 mm Clamping unit Clamping force: 4200 kN / 420 t Maximum mold opening force: 250 kN Dimensions of mounting plates (H × V): 1270 × 1230 mm Distance between columns (H × V): 800 × 800 mm Maximum mold opening stroke: 1020 mm Minimum mold height: 380 mm Maximum distance between plates: 1400 mm Ejector stroke: 250 mm Ejector force front / rear: 95 / 49 kN Injection unit 4300 Screw diameter: 90 mm Ls/D ratio: 20 Maximum injection pressure: 1839 bar Injection volume: 2290 cm³ Injection weight for PS: 2084 g Standard injection rate: 604 cm³/s Nwodpfx Aszvmx Njkisn Injection rate with accumulator: 1909 cm³/s Standard screw speed: 195 rpm PS plasticizing rate at standard speed: 134 g/s PS plasticizing rate at increased speed: 186 g/s Nozzle clamping force: 129 kN Electrical and hydraulic system Rated power of pump motor: 90 kW Installed heater power: 44 kW Number of cylinder heating zones: 7 Dry cycle time / stroke according to EUROMAP 6: 2.8 s / 560 mm Oil tank capacity: 1000 l Dimensions and weight Machine dimensions (L × W × H): 7.6 × 2.5 × 2.4 m Net weight including control cabinet: 25.5 t

Condition: good (used), Year of construction: 2000, operating hours: 118,400 h, functionality: fully functional, machine/vehicle number: 182854, clamping force: 2,500 kN, overall weight: 14,000 kg, heating capacity: 23.1 kW (31.41 HP), type of input current: three-phase, For sale is an Arburg 630 S 2500-130 injection moulding machine. The machine is in good condition and ready for immediate operation. Technical data: Nwsdpfoyx Daxsx Akijn Year of manufacture: 11/2000 Place of production: Made in Germany Clamping force: 2500 kN Operating hours: 118,400 h Injection unit: 1300 (shot volume/capacity) Total machine weight: 14,000 kg Operating voltage: 400 V (3 ~ AC) Frequency: 50 Hz Heating capacity: 23.1 kW Pump motor: 45.0 kW Total connected load: 68.1 kW Transport and loading can be organised throughout Europe for an additional charge, upon request. Prices are subject to VAT. Inspection possible by appointment. Please contact us—our team will be happy to assist you. Trade-in or exchange possible! Machinery purchase & sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you want to sell yours? For more information or contact options, please visit our website.

Condition: like new (used), Year of construction: 2021, operating hours: 730 h, functionality: fully functional, clamping force: 2,700 kN, nominal power: 22 kW (29.91 HP), operating pressure: 265 bar, We offer this like-new DESMA D 969.250 Z (S3) rubber processing machine, manufactured in 2021. Closing force: 2700 kN Injection volume: 500 cm³ Injection pressure: 3500 bar EUROMAP size: 2700-1750 Voltage: 400 V Frequency: 50 Hz Short-circuit current max.: 10 kA Total current: 138 A Pre-fuse: 160 A Pump pressure: 265 bar Pump drive flow rate: 72/39 l/min Pump drive power consumption: 32.0 A Pump drive power: 22 kW Nozzle system force: 58 kN Weight: 10.7 t Compressed air volume flow: 0.5 m³/h Compressed air pressure: 6 bar Cooling water volume flow: 1.6 m³/h Cooling water temperature max.: 20 °C Operating hours: hydraulic motor: 730 hours, hydraulic pump (closing force): 65 hours, operating system: active 3,360 hours Ideal for the production of: • technical rubber molded parts • seals and O-rings • automotive and industrial components Condition & Availability: • Machine is available for immediate delivery • Condition: very well maintained / regular servicing Nedpfx Akozgvxyoijwn • Inspection possible by arrangement Other: • Documentation and accessories available on request • Assistance with disassembly / loading / transport can be arranged If you have any questions or require further information, please send us a message or call us.

Condition: good (used), Year of construction: 2006, clamping force: 1,550 kN, screw diameter: 30 mm, displacement volume: 113 cm³, injection pressure: 2,500 bar, Injection Moulding Machine Ferromatik Milacron Elektra 155 Manufacturer: Ferromatik Milacron Europe Model: Elektra 155 Evolution Machine Type: EE 155 Machine No.: 427077 Year of manufacture: 2006 Nwedeythvropfx Akion Clamping force: 1550 kN International size: 1550H-300 Injection pressure: 2500 bar Shot volume: 113 cm³ Screw diameter: 30 mm Motor power: 19.7 kW Heating capacity: 10.2 kW Weight approx.: 7.4 t Operating hours: 77022 h

Condition: defective spare-parts repository (used), Year of construction: 2011, functionality: not functional, machine/vehicle number: 50.11.547, clamping force: 1,472 kN, screw diameter: 45 mm, clearance between the columns: 460 mm, ejector force: 4,000 N, opening stroke: 460 mm, total length: 6,000 mm, total width: 1,300 mm, total height: 2,000 mm, overall weight: 6,600 kg, number of injections: 1, power: 64 kW (87.02 HP), input voltage: 400 V, For sale is a hydraulic injection molding machine, NPM Multipower 150, manufactured in 2011. The machine is being replaced by a larger unit due to a capacity expansion. During the dismantling process, the control panel (HMI) was removed and sent in for repair. Since the machine is no longer needed, we would prefer not to invest in the cost of a repair. For this reason, the machine cannot currently be put into operation or its functionality tested. The operating hours also cannot be read at this time. The machine was mainly used in our facility for the production of plastic caps as well as sample and prototype parts. Accordingly, it was rarely operated in multi-shift mode or under high load. The removed control panel will be provided with the machine. We are not aware of the current repair status. Upon request, we will gladly provide contact information for the responsible service partner so that a potential buyer can inquire directly about repair options. The machine is explicitly sold as an untested used machine without any functional guarantee. It is particularly suitable for specialized companies with their own maintenance department, for retrofit projects, or for obtaining spare parts. Nwodpfx Aksza D Idjijn Inspections are possible and expressly encouraged, by prior arrangement.

Condition: good (used), For sale is a rotary table type 800E suitable for a Netstal SynErgy 2000 injection molding machine. Technical data: Nsdpfsxvz A Njx Akiown Travel X-axis: 500 mm Travel Y-axis: 380 mm Travel Z-axis: 400 mm Table design: NC rotary tilting table Rotary/tilt axes: B-axis approx. -10° / +95° C-axis (rotation): 360° Max. workpiece weight: approx. 200 kg Table size: Ø 500 x 380 mm Main spindle: SK 40 (ISO 40) Max. speed: approx. 10,000 rpm Max. tool length: approx. 280 mm Max. tool weight: approx. 6 kg Transport dimensions: 2.45 x 1.76 x 2.38 m Machine data: Machine weight approx. 3,500 kg Total power requirement: approx. 17 kW Transport and loading can be organized throughout Europe on request and for an additional charge. Prices exclude VAT. Inspection possible by appointment. Please contact us—our team looks forward to assisting you. Trade-in or exchange possible! Machinery Purchase / Sales BUYING / SELLING OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you want to sell yours? For further information or to contact us, please visit our website.

Condition: like new (used), Year of construction: 2008, operating hours: 6,200 h, functionality: fully functional, clamping force: 4,200 kN, screw diameter: 75 mm, Krauss-Maffei KM 420-2000 CX Krauss-Maffei injection molding machine, 420 tons of clamping force. Only 6,000 hours of automatic operation. Year of manufacture 2008. MC5 control. Screw diameter 75 mm. Extras: 8 hot runner zones. 2 cores on fixed platen, 2 cores on moving platen. 1 pneumatic valve on moving platen. The injection molding machine is delivered reconditioned by UK Transitus' expert technical team. We can offer commissioning at our clients' facilities, ensuring operation upon completion of the installation. Technical Details 75mm screw Injection pressure: 1635 bar Shot volume: 1237 cm3 Shot weight: 1126 g Maximum distance between plates: 1400 mm Minimum mold thickness: 380 mm Opening stroke: 1020 mm Nwjdswq D Efepfx Akien Distance between columns: 900 x 800 mm Plate dimensions: 1270 x 1230 mm 75mm screw Clamping force: 4200 kN Year of manufacture: 2008 Working hours: 6282

Condition: excellent (used), Year of construction: 2012, operating hours: 25,000 h, functionality: fully functional, clamping force: 8,500 kN, screw diameter: 95 mm, displacement volume: 3,367 cm³, Clamping force 8500 kN Mould opening force, max. 560 kN Travel force movable platen opening 89 kN Travel force movable platen closing 92 kN Size of mould platens (h x v) 1600 x 1600 mm Distance between tie bars (h x v) 1140 x 1140 mm Mould opening stroke 1600 mm Mould height min/max 500/1100 mm Max. daylight 2100 mm Hydraulic ejector - stroke 300 mm Ejector force 200/100 kN Injection unit: Screw diameter 95 mm Ls/D ratio 23 Injection pressure 1795 bar Stroke volume 3367 ccm Shot weight (PS) 3064 gr. Injection rate 690 ccm/s Screw speed 116 1/min Plasticising rate max. 104 g/s Nozzle pressure 166 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 90 kW Installed heating capacity 53 kW Adjustable barrel heating zones 7 Oil Reservoir capacity 1500 ltr. Nwsdpfx Akoyb Sx Heion Dimensions and weights: Dimensions of the machine ca. 11,00 x 3,00 x 2,60 m Total machine weight 43000 kg Max. mould weight 12200 kg Accessories: - Anti vibration pads Additional Options: - 1 x Air valve - 4 x hydr. core pulls - 12 x hydr. sequentional valves - 2 x 12 folds water flow regulator - Robot interface according to Euromap 67

Condition: ready for operation (used), Year of construction: 2019, operating hours: 25,500 h, clamping force: 10,000 kN, screw diameter: 110 mm, displacement volume: 3,136 cm³, Sumitomo SHI Demag EL-Exis SP 1000-6300 Nedpoygk Eisfx Akiswn

Condition: repair required (used), functionality: not functional, clamping force: 1,600 kN, screw diameter: 50 mm, clearance between the columns: 470 mm, For sale is an injection molding machine from the Arburg brand and the type 470 C 1600-800 The pump and a card have been removed from the machine, so the machine is being sold as defective. It is otherwise in very good condition Technical data: Pump hours: 61,400 Clamping force: 1600 kN Clear column spacing: 470*470 Ejector travel: 225 mm Screw diameter: 50 mm Nwodov Edrispfx Akijn Displacement: 398 cm³ Dimensions: 4335*1635*1950 mm Weight: 6950 kg The machine is offered without peripherals Transport and loading can be organized throughout Europe on request for an additional charge. Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machine purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, visit us on our website

Condition: like new (used), Year of construction: 2022, operating hours: 200 h, functionality: fully functional, screw diameter: 70 mm, overall weight: 600 kg, clamping force: 80 kN, total width: 2,800 mm, total length: 4,000 mm, total height: 2,260 mm, Main Features: 1. Computer Control System (PLC) – Japanese Mitsubishi PLC 2. Electrical Cabinet – All electrical components are sourced from globally renowned brands, ensuring quality and stability. 3. Touch Screen – Innovation computer control system 4. Advanced Hydraulic Cylinder from Germany 5. Linear Guideway 6. ABB Inverter from Switzerland & Rexroth from Germany 7. Large Diameter Galvanized Steel Pipes 8. Electric Lifting Platform 9. Ceramic Heater 10. Hydraulic System & Valve Connections – From Yuken Industry Technical Specifications: • Suitable Material: PE, PP, and others • Max Volume: 6 L • Production Capacity: 170-260 pcs/h • Dimensions: 4.0 × 2.26 × 2.8 m • Weight: 6T Plasticization System: • Reducer: Hard finishing, high strength, low noise • Screw: Ø 70 mm, L/D ratio 24, 38CrMoALA, cooling system available • Plasticization Capacity: 100 kg/h (HDPE) • Heating Zones: 3-4 aluminum heaters, automatic heating • Heating Power: 12 kW/h • Extruder Motor: Three-phase asynchronous motor (380V, 50HZ) • Cooling Fan: 4 zones, automatic cooling Extrusion System: • Material: High-grade alloy steel, central feeding • Number of Die Heads: 1 • Max Die Mouth Diameter: Ø 160 mm • Heating Zones: 4, stainless steel heating cycle • Heating Power: 5-7 kW Clamping System: • Features: High strength, rigidity, central mold locking, stable mold opening & closing • Clamping Force: 80KN • Template Distance Adjustment: 170-520 mm • Max Mold Size: 380 × 420 mm Electric System: • Automatic Monitoring, Fault Alarms, Auto Counting, Auxiliary Functions • Control Interface: Touchscreen with self-diagnosis alarm system • Temperature Control: Automatic temperature control module • Motion Control: Inovance (Chinese/English version) Hydraulic System: • Features: Multi-functional integrated hydraulic block, proportional control, high efficiency • Oil Pump Motor: Three-phase asynchronous motor (380V/220V, 50/60HZ) • Oil Pump: Imported double pump • Valves: Imported oil pump valves and connections • Oil Pipes: Double-layer wear-resistant • System Pressure: 60 kg/cm² • Cooling System: Separate water cooling cycle, oil cooler Pneumatic System: • Brand: Taiwan AIRTAC pneumatic system • Air Pressure: 0.6 MPa • Air Displacement: 0.8 m³/min • Electromagnetic Valve: Taiwan AIRTAC Main Components: Electronic Parts: • PLC Control System: MITSUBISHI from Japan • Touch Screen: INOVANCE • Temperature Controller: HUICHUAN • Auxiliary Relay: OMRON • Contactor: Schneider from France • Electric Motor: Three-phase 380V • Power Source: TAIWAN MEANWELL • Transducer: ABB from SWITZERLAND Hydraulic Parts: • Oil Pump: TAIWAN HIGH-TECH • Valve: YUKEN • Oil Pump and Connection: YUKEN • Sealed Part: HALLITE Air Control System: • Cylinder: AIRTAC • Air Valve: AIRTAC This blow molding injection machine was purchased directly from a factory in China for a specific project that was never realized. The machine was used for only one month. Location: Siemianowice Slaskie, Poland We also have peripheral equipment available for sale, such as: • 5 HP AIR COOLING SYSTEM • Auto Loading Nedpfsv Iflpjx Akiswn • 150 kg Color Mixer • Scraps Crusher

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 61036721, clamping force: 6,500 kN, screw diameter: 70 mm, clearance between the columns: 1,110 mm, displacement volume: 1,078 cm³, injection pressure: 1,877 bar, injection weight: 981 g, opening stroke: 3,200 mm, plate height: 1,540 mm, drive type: Hydraulisch, clear span: 3,200 mm, tool weight: 2,200,000 g, Injection Moulding Machines Directly from the Manufacturer! As the manufacturer KraussMaffei, we offer you our certified and flexible stock machines: The hydromechanical two-platen clamping unit of the GXW machine sets new standards in terms of quality and productivity. With the sophisticated GuideX sliding shoe, forces are ideally absorbed and the service life of the moulds is extended. The innovative GearX locking system engages instantly and reliably. Powerful, user-friendly and value-retaining. TECHNICAL DATA: KM 650 / 2000 / 2000 GXW G06 (Order 38618339) CONTROL SYSTEM - MC 6 with 24'' TFT color screen with multitouch functions CLAMPING UNIT - Clamping force: 6500 kN - Max. mould opening force: 455 kN - Daylight opening (h x v): 1110 x 960 mm - Platen size (h x v): 1540 x 1440 mm - Mould installation height min. - max.: 1550 mm (without centre platen) - Opening stroke: 3200 mm - Max. mould opening distance: 1650 mm - Max. mould weight: 22,000 kg INJECTION UNIT 1 SP2000 - Screw diameter / type: 60 mm / thermoplastics - Effective L/D ratio: 23.3 - Injection pressure: 2420 bar - Shot volume: 792 cm³ - Shot weight at max. stroke for PS: 720 g - Injection speed: 140 mm/s - Injection throughput: 396 cm³/s - Screw drive speed: 285 rpm - Plasticizing throughput: 72.2 g/s - Nozzle contact force: 82 kN INJECTION UNIT 2 SP2000 - Screw diameter / type: 70 mm / thermoplastics - Effective L/D ratio: 20 - Injection pressure: 1877 bar - Shot volume: 1078 cm³ - Shot weight at max. stroke for PS: 981 g - Injection speed: 140 mm/s - Injection throughput: 539 cm³/s - Screw drive speed: 285 rpm - Plasticizing throughput: 98.3 g/s - Nozzle contact force: 82 kN ELECTRICAL PARAMETERS - Connected load: 341 kW - Power supply: 400 V / 50 Hz, 3 phases with neutral conductor WEIGHT & DIMENSIONS - Net weight: 43.5 t - L x W x H: 11.89 x 3.22 x 2.77 m ADDITIONAL EQUIPMENT - Wear-resistant plasticizing unit - BluePower full insulation for plasticizing cylinder - Open nozzle - BluePower ServoDrive - Pneumatic valve: 1-fold (BWAP), 1-fold (FWAP) - Pneumatic cascade valves: 6-fold (BWAP), 6-fold (FWAP) - Hydraulic core pull: 2-fold (BWAP), 2-fold (FWAP) - Mould heating: 96 zones (3.5 kW each) - Euromap interface for handling: E18 - Euromap central computer interfaces: E67, E77, E78, E63, E82.1 - Adaptive Process Control (APC+) - Graphic analysis package - Sliding table with turning unit, servo-driven - Vertical centre platen - Parallel clamping & opening during injection process with bar parallelism control between FWAP and centre platen or BWAP and centre platen - ColorForm interface signal interface for connecting an RPM unit - Electrical interface for HRS-Flexflow system - Electrical interface and hydraulic valves for "1-K dummy operation" - Interface for connecting a CoMo-Kistler Injection Basic System with good/bad part separation Nwedpsw U N Ixofx Akijn The machine is located at our plant in Parsdorf and is available at short notice. Further additional options can be offered on request. We look forward to your enquiry.

Condition: excellent (used), Year of construction: 2008, Krauss Maffei Injection Moulding Machine KM 300-1000 CX Year of manufacture: 2008 Manufacturer: Krauss Maffei Control system: MC 5 with colour monitor, integrated control panel, and disk drive station Clamping system: fully hydraulic Plasticising unit SP 1000 Screw diameter: 50 mm Non-return valve, open nozzle Nozzle radius: 15 mm, bore: 3 mm Clamping unit Clamping force: 3000 kN Opening force: 169 kN Platen dimensions (H × V): 995 × 1050 mm Tie bar spacing: 630 × 630 mm Mould opening stroke: 820 mm Minimum mould height: 330 mm Maximum daylight (max. mould open width): 1150 mm Ejector stroke: 200 mm Ejector force (forward/backward): 58 / 28 kN Injection unit Screw diameter: 50 mm L/D ratio: 22.0 Injection pressure: 2304 bar Injection volume: 432 cm³ Shot weight (PS): 393 g Injection speed: 170 mm/s Injection flow rate: 334 cm³/s Screw speed (standard): 370 rpm Plasticising rate (at standard screw speed): 54.3 g/s Electro-hydraulic equipment Pump motor power: 45 kW Njdpfx Asw U Rcdekiswn Heater capacity: 18.7 kW Number of heating zones: 5 Dry cycle time / stroke per Euromap 6: 2.8 s / 441 mm Oil tank capacity: 720 l Dimensions and weight Net weight (including control cabinet): 12.5 t Dimensions (L × W × H): 6.11 × 2.17 × 2.25 m

Condition: good (used), Year of construction: 2004, On request and for an additional charge, loading and transport (throughout Europe) can be arranged. All prices include VAT. Njdexirqqepfx Akiswn Viewing is possible by appointment. Please contact us—our team will be happy to assist you. Trade-in or exchange is possible! Phone: Mobile: (also via WhatsApp) Web: Machinery Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Do you need a high-quality yet affordable metalworking machine for your production? Or are you looking to sell yours? For further information or contact options, please visit our website.

Condition: new, Year of construction: 2005, screw size 60 mm injection shot weight in Polysterol 607 g/PS closing pressure 3200 kN Control SELOGICA mould space 300 mm clamping plate 1040 x 1040 mm opening stroke 700 mm total power requirement 96 kW weight of the machine ca. 17 t dimensions of the machine ca. 7 x 2.2 x 2.3 m This plastic injection moulding machine is in very good condition, can be inspected by can be inspected at the seller's premises by prior arrangement and is supplied incl. Multilift H. Operating hours: 42878h Nwjdpfovkqfaox Akijn

Year of construction: 1985, condition: used, closing pressure 4360 kN Nwedpfstqqr Esx Akijn table-size 730 x 730 mm control B+R Industrieelektronik draw back pressure 190 kN ajustment speed max. 60 mm/sec return speed max. 90 mm/sec daylight between the columns 900 mm total power requirement 30 kW dimensions of machine L x W x H 3,61 x 2,1 x 3,1 m dimensions of switch cabinet 0,85 x 0,44 x 2,0 m dimensions of hydaulic 1,0 x 0,85 x 2,36 m weight ca. 15 t = vulcanizing press with vertical closing unit, with form removal and form separation device

Condition: good (used), Year of construction: 2012, For sale are 2 identical injection molding machines from Netstal, type SynErgy 2000-230/110. The machines were in production until recently. The company from which these machines originate places great emphasis on maintenance and servicing, which is why the machines are in very good condition. 2-cavity function Rotating platen Designation: Netsal SynErgy 2000 Year of manufacture: 2012 Nwodpfxjkv Uq Is Akien Operating hours: 28,828 Weight: 13,300 kg Clamping force in kN: 2000 Injection unit: 230 Machine drive: 45 kW drive power Length: 6901 mm Width: 2075 mm Height: 2240 mm Cylinder size AG1: 20mm / 32mm - Available Cylinder size AG2: 25mm / 32mm - Available ____ Handling: Wittmann, can be purchased separately Serial number: W833PRO – 0284 Operating hours approx.: 13,000 h Year of manufacture: 2016 Conveyor belt (lower) Width: 400 mm Length: 2300 mm The systems can be purchased complete or as individual parts. Machines have already been disassembled. Prices plus VAT. Inspection possible by appointment. Contact us, our team will be happy to assist you. Trade-in or exchange possible! Machine purchase/sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, ETC. Do you need a high-quality but affordable metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website.

Condition: good (used), Year of construction: 2007, operating hours: 47,963 h, functionality: fully functional, clamping force: 200 kN, For sale is an injection molding machine of the brand KraussMaffei and the type KM 200-220/220 CZ Multinject The machine is in a fully functional and well-maintained condition Technical data Year of construction: 2007 Clamping force: 200 t Aggregates: 2 Automatic hours: 47 963 Dimensions: 5200*2200*2700 mm Weight: 11,500 kg Further technical data will follow shortly Offer refers only to the machine, the peripherals shown in the pictures are not part of the offer On request, loading and transport (Europe-wide) can be organized for an additional charge. Prices plus VAT Viewing possible by appointment. Please contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? Nwsdpfervimbox Akien For further information or contact options, please visit our website

Condition: excellent (used), Year of construction: 2005, operating hours: 4,108 h, functionality: fully functional, machine/vehicle number: 591343, clamping force: 1,550 kN, An injection molding machine of the Ferromatik brand and type K-TEC 155 S / 2F is for sale. The machine is in very good condition. Please note the low operating hours of only 4,108 h Nwedpfxot Tdptj Akion Technical data: Year of construction: 2005 Clamping force: 1,550 kN Clear column distance (H. x V.): 500*500 [560*560] mm Mold opening stroke: 650 mm Platen distance max.: 950 [1150] mm Tool installation height: 300 [500] mm Opening force: 86 kN Screw diameter 1: 50 mm Screw diameter 2: 40 mm Injection pressure max.: 1568 bar Max. stroke volume: 314 cm³ Electrical connection: 40 kW Machine dimensions (L x W x H): 5,500 x 1,700 x 2,400 mm Weight: 7,800 kg Oil tank capacity: 480 l On request, loading onto trucks and transport throughout Europe can be organized for an additional charge. Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Year of construction: 2019, condition: used, For sale: a partial injection molding cell consisting of a hydraulic press, a linear Cartesian robot, and a perimeter safety fence. This system is ideal for those seeking a ready-to-use package for molding and automatically unloading parts. The package includes only the 3 items listed below: 1. HYDRAULIC INJECTION MOLDING MACHINE Njdpfx Aezw H Dbskiown Brand and Model: ARBURG ALLROUNDER 520 C 2000-675 Year of manufacture: 1998 Clamping force: 2,000 kN (200 tons) Screw diameter: 50 mm Distance between columns: 520 × 520 mm Platen size: approximately 715 × 715 mm Opening stroke: approximately 650 mm Control: SELOGICA Machine weight: approximately 6,500 kg 2. LINEAR CARTESIAN ROBOT Brand and Model: STAR AUTOMATION XW-1000VI 2V Year of manufacture: 2019 Configuration: 3 servo-assisted linear axes (brushless motors), space-saving telescopic vertical arm. Included: Control cabinet, original operating keyboard (remote control) for programming, and manuals. 3. PERIMETER SAFETY FENCE Manufacturer: Star Automation Europe Features: Modular structure with a metal mesh to protect the work area. Access door equipped with safety microswitches and an interlocked electric lock. Included: External control panel for access requests and emergency chain reset.

Condition: used, Year of construction: 2000, operating hours: 65,000 h, functionality: unexamined, machine/vehicle number: BA 850 CD Plus, clamping force: 850 kN, screw diameter: 1 mm, clearance between the columns: 1 mm, column diameter: 1 mm, displacement volume: 1 cm³, injection pressure: 1 bar, injection weight: 1 g, mold height (min.): 1 mm, ejector force: 1 N, ejector stroke: 1 mm, total length: 1 mm, total width: 1 mm, total height: 1 mm, type of input current: AC, input frequency: 50 Hz, input voltage: 360 V, input current: 1 A, 4x Battenfeld BA 600 / 850 CD Plus - EX LEGO - 38.641h / 73.827h - Dry Storage Location: 5932 Humble, Langeland Island, Denmark - BRIDGE CONNECTED - NO FERRY NEEDED! Storage: Dry indoor hall, immediately available History: All machines from same LEGO subcontractor - only clean material - maintained to LEGO standards - BA CD Plus series with Unilog control FOR SALE - 4 MACHINES: 1. Battenfeld BA 600 CD Plus - 38,641h documented - 57A Motor / 97A Heating - 380V/220V + Trafo - 50Hz - RS232 - Good condition 2. Battenfeld BA 600 CD Plus - Good condition - 57A Motor / 97A Heating - 380V/220V + Trafo - 50Hz - RS232 3. Battenfeld BA 850 CD Plus - 73,827h documented - 80A Motor / 27A Heating - 380V/220V + Trafo - 50Hz - RS232 - Good condition 4. Battenfeld BA 850 CD Plus - Poor condition / donor for spare parts Condition: All machines running until dismantling. Hour meters 38,641h - 73,827h Technical: Standard 400V / 220V + transformer, 50Hz, RS232 interface Loading: Crane required approx 3.5-5.0t per machine. Bridge connected - no ferry cost. Price: 3.500 EUR each EXW 5932 Humble, Denmark Package Price: 12.000 EUR for all 4 EXW Nwedpfezp Hy Hsx Akion Contact for more photos/information - Videos available on request.

Year of construction: 2016, condition: ready for operation (used), A fully equipped Arburg injection molding machine including clean air supply Filter Fan Unit and removal robot is available. Clamping force: 1600kN, screw diameter: 45mm, max. cylinder heating: 450°C, total connected load: 85.5kW, machine elevation: 100mm, operating hours: approx. 13361h. Arburg Multilift H: axis: B, Z-axis stroke: 1400mm, conveyor belt length: 2500mm, conveyor belt width: 600mm, deposit height range: 900mm-1300mm, temperature resistance: 160°C. Documentation available. An on-site inspection is possible. Nwjdpfx Aksyab Nfeien

Year of construction: 2002, condition: ready for operation (used), An Arburg injection molding machine with a rotary unit on the moving mold half is available. Column spacing: 420mm, clamping force: 1000kN, opening force: 250kN, opening stroke: 500mm, min. mold installation height: 250mm, platen dimensions X/Y: 570mm/570mm, max. mold weight: 600kg, ejector stroke: 175mm. Injection unit 350, screw diameter: 35mm/40mm/45mm, max. shot volume: 230cm³, max. injection pressure: 2500bar. Machine dimensions X/Y/Z: approx. 4300mm/1700mm/2750mm, weight: approx. 4500kg, operating hours: approx. 75443h. Documentation available. On-site inspection is possible. Nwjdpfx Asyddy Iekijn