Used Guide Fence for sale (5,486)

Condition: excellent (used), Year of construction: 2019, Combined jointer and thicknesser Knjdpfx Akezi Nhmewoc SCM minimax fs 41e Year of manufacture: 2019 Power of drive motor: 5 kW Connection voltage: 400 V Mains frequency: 50 Hz Planer cutterhead type: TERSA – 4 cutterheads Speed: 5200 rpm Planing width, max.: 410 mm Feed rate: 6 / 12 m/min Dust extraction port: 2, diameter for thicknessing: 120 mm Jointer Infeed table, length: 1034 mm Chip removal, max.: 5 mm Dimensions and weights, length: approx. 2000 mm Width/depth: approx. 1110 mm Height: approx. 1115 mm Weight: approx. 430 kg TERSA cutterhead system enables particularly quiet operation. Helically toothed steel infeed roller for consistent and uniform material feed. Material feed with two speeds. Numerical display for thickness table height. The 2,000 mm long jointer tables facilitate easy jointing of large workpieces. Work tables are made of gray cast iron, annealed and stress-relieved, making them resistant and permanently flat. Sturdy, large aluminum jointer fence with round bar guide (1200 x 160 mm) Thickness table adjustment via handwheel with numerical display for planing height. The high machine weight ensures the highest precision and smooth operation. Powerful industrial motor Robust steel/gray cast iron construction.

Condition: used, Year of construction: 2006, Used Machine Year of Manufacture: 2006 Features and Technical Specifications Kedpfxs Advffj Akwjnc - Motor power: 4 kW/400 V - Saw blade swivels on both sides from -46° to 46°—a total swivel range of 92° for flexible angle cuts against the rip fence and crosscut fence - Maximum cutting height: 72 mm - Saw blade diameter: 250–315 mm - Saw blade speed: 5,000 rpm - Cutting width: 1,250 mm - Sliding table length: 3,300 mm - Touchscreen control with an eye-level control panel - Electric height and tilt adjustment of the saw blade - Intuitive operating menus with step-by-step guidance for complex operations - Integrated calculator and special functions for angle cuts and chamfering - Tool management for up to ten tools, enabling dimensionally accurate setup without the need for re-referencing after a saw blade change - Keyless “VLock” quick-change saw blade system for fast tool changes - Precision sliding table with interchangeable table lip and sturdy hollow-section profiles, lockable in any position - Ball-bearing-mounted rip fence with adjustment via handwheel and digital display - Length stop with smooth-running stop carriage and fine adjustment - Splitting wedge guard for a clear view of the saw blade and workpiece - Dust extraction port on machine stand: 120 mm - Dust extraction port on guard: 60 mm - T74 parallelogram cross table - DIN A4 guide holder - T74 length stop, similar to the above, with continuous stop surface and two hinged stop elements - CE standard - Weight: approx. 1,250 kg

Condition: ready for operation (used), Year of construction: 2019, overall weight: 1,259 kg, This SCM SI 5 panel saw was manufactured in 2019. It features a maximum cutting height of 200 mm at 90° and a sliding table version of 3800 mm, allowing for format cuts up to 3800 x 3200 mm. The machine is equipped with an "EASY TOUCH 7" electronic control unit, enabling up to 999 storable programs. If you are looking to get high-quality cutting capabilities, consider the SCM SI 5 panel saw we have for sale. Contact us for further details. - Controlled Axes: Up to 3 axes (Main Saw Height, Main Saw Tilt, Programmed Rip Fence / Scoring Unit positioning) - Voltage: 400 V - Phases: 3 ~ - Current: 22 A - Frequency: 50 Hz - Short-circuit current (Icc): 12 kA - Main Motor Power: 9 kW (12 HP) at 50Hz (with automatic star-delta starter) - Scoring Motor Power: 0.9 kW (S6-40%) - Main Saw Blade Diameter: Up to 550 mm (without scoring blade); up to 450 mm (with scoring blade) - Max. Cutting Height at 90°: 200 mm - Max. Cutting Height at 45°: 130 mm - Saw Blade Swivel: 46° - Saw Blade Speeds: 2500 / 3500 / 5000 RPM - Scoring Saw Speed: 8500 RPM - Cutting Width at Rip Fence: 1500 mm - Sliding Table Version: 3800 mm (Format cuts up to 3800 x 3200 mm) - Exhaust Socket Diameters: 120 mm (on frame), 100 mm (on saw blade guard) - Fence System: Programmed rip fence with THK guide and recirculating ball screw (25 m/min speed), fully swingable under the table - Blade Clamping: "Pro-Lock" system for quick clamping of main saw blade with keyless riving knife adjustment Knjdpfxe Adti Uj Akwec

Condition: new, Catalog number: S 0335 - New machine, in stock - CE certificate PLANER: - Work table dimensions: 1500 x 320 mm - Max. cutting depth: 5 mm - Dimensions of the aluminum guide rail, mm: 1100 x 155 JOINTER: - Work table dimensions: 316 x 600 mm - Max. cutting depth: 3 mm - Cutting speed: 7 m/min - Material thickness: 4 - 230 mm - Motor power: 3 kW - Milling head speed, min-1: 5600 - Dimensions (L/W/H): 1500/600/1050 mm - Weight: 315 kg * Cast iron tables with a ground surface, Knjdpfozh H N Eex Akwjc * Tables with precise adjustment for longitudinal planing, * Stable aluminum guide rail (fence) with the ability to tilt from 90° to 45°, * Milling head guard, * Work table for the thickness planer with a central guide column and carriage, * Power on/off without stopping the machine, * Mortising machine with left-hand rotation. Net price: 14,500 PLN Net price: 3,372 EUR Net price calculated based on an exchange rate of 4.30 PLN/EUR (price may change in the event of significant exchange rate fluctuations)

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, wire diameter (max.): 8 mm, WAFIOS BMU 40 CNC 3D Wire Bending Machine | 2015 | Decoiler | Tooling | Complete Production Cell Complete CNC Wire Bending and Forming Cell WAFIOS BMU 40 CNC wire bending machine | Wire decoiler / pay-off system | Tooling sets | Conveyor and collection system | Safety enclosure | CNC control For sale: a complete used WAFIOS BMU 40 CNC wire bending and forming machine with peripheral equipment and extensive tooling. The machine is designed for automatic production of formed wire components and is offered as a complete production cell. The machine is currently installed together with the wire feeding system, decoiler, finished-part handling equipment, safety guarding and dedicated tooling. The system consists of: • WAFIOS BMU 40 CNC 3D wire bending machine • CNC control unit with operator panel • Handheld operator control • Wire feeding and straightening section • Wire decoiler / pay-off unit • Automatic wire forming and bending section • Finished-part conveyor / collection system • Tooling and forming accessories • Tool cabinet with dedicated tooling • Additional machine tools and accessories • Safety fencing with access gates • Electrical and control equipment Technical Specifications • Manufacturer: WAFIOS AG, Germany • Model: BMU 40 • Machine type: CNC wire bending / forming machine • Number of CNC axes: 3 • Wire diameter range: 3 - 8 mm • Year of manufacture: 2015 • Machine No.: 2 7656 018 • Plan No.: 7656 2 9000 18 • Power supply: 3-phase, 400 V • Frequency: 50 Hz • Rated current: 13 A • Control voltage: 24 V DC / 230 V AC • CE marked Equipment Included • Wire decoiler / pay-off system • Wire feeding and straightening equipment • CNC operator station with screens and keyboard • Handheld control unit • Dedicated forming tools, dies, guides and accessories as shown in the photos • Tool storage cabinet • Finished-part conveyor / collection table • Product collection racks • Safety guarding around the complete production cell • Additional maintenance and setup tools as shown in the photos Technical Condition Used industrial machine from a production environment. The machine is installed as a complete production cell with peripheral equipment and tooling. The equipment is offered together with the accessories and tooling shown in the photos. Additional Information • Complete production cell available • Extensive tooling and accessories included as shown in the photos • Wire decoiler included • Finished-part handling / collection system included • Safety fencing included • Inspection available by appointment • Sale due to plant closure • All de-installation, loading and removal costs are the buyer’s responsibility Location Kodpfez R Rpbsx Akwonc Koszalin, Poland

Condition: used, SCM F410 Jointer 4-knife cutterhead Fence with comb guides Width 410 mm Table length 2600 mm Adjustable infeed table angle Well-maintained machine, quiet operation Knodpfx Aksz Szbcowsc

Condition: used, A compact but robustly built industrial level free standing resaw. Variable feed speeds Suitable for softwoods and hardwoods Quick, simple and safe to operate Feeding system / general capacity. RVP 200 variable speed feed system Steel feed rollers 200mm dia. Variable feed speed 0 - 30 mt/min speed. Max. feed roller to blade clearance 200mm. Max. fence to blade clearance 200mm. Main saw Knjdszx D Umjpfx Akwsc Dia. of saw pulleys 800mm. Max. cutting height 400mm. Max. blade width 80 x 0.8mm. Max. / Min blade length 5530 / 5380mm. Height of the table from the floor 950mm. Table size 1060 x 8000mm. Automatic star-delta starter. Automatic pneumatic braking of wheels. Safety micro-switch to doors. Front infeed support rollers with emergency protection cable. Tilting table 15 dergrees. Telescopic blade guard. CHACO blade guide on the table. Rackwork. Dust scrapers on wheels. Steel saw blade ready for use. Extraction points x 2 - 100 and 120mm dia. Working air pressure 6 to 8 bar.

Condition: good (used), machine/vehicle number: Machine No.: 2 6108 031, WAFIOS R 31 Wire Straightening and Cutting Machine | Decoiler | Omron Control | Tooling | Complete Production Cell Complete Wire Straightening and Cutting System WAFIOS R 31 wire straightening and cutting machine | Wire decoiler / pay-off unit | Omron operator panel | Long material handling system | Extensive tooling | Safety enclosure For sale: a complete used WAFIOS R 31 wire straightening and cutting machine with peripheral equipment and extensive tooling. The machine is designed for straightening and cutting wire supplied from coils and is offered as a complete production cell, including the decoiler, wire processing equipment, long finished-part collection system, control equipment, tooling and safety guarding. The system consists of: • WAFIOS R 31 wire straightening and cutting machine • Wire decoiler / pay-off unit • Wire feeding and guiding system • Wire straightening section • Cutting system • Long finished-part handling / collection system • Omron operator panel • Digital weighing system • Electrical control cabinet • Dedicated tooling and accessories • Tool storage cabinet • Safety fencing and access gates • Emergency stop and safety system Technical Specifications • Manufacturer: WAFIOS • Model / Type: R 31 • Machine type: Wire straightening and cutting machine • Machine No.: 2 6108 031 • Operator interface: Omron • Wire supply: Coil / decoiler system • Integrated digital weighing equipment Equipment Included • Wire decoiler / pay-off system • Wire feeding equipment • Straightening and cutting equipment • Long material support and finished-part collection system • Omron operator panel • Digital weighing equipment • Electrical control cabinet • Extensive set of dedicated tooling • Straightening dies and rollers • Wire guides and bushings • Cutting tooling • Tool storage cabinet • Safety fencing around the production cell • Supporting frames and accessories shown in the photos Tooling The machine is offered with a substantial set of dedicated tooling and spare tooling components. The photos show multiple straightening dies, rollers, guides, bushings, cutting components and other machine-specific accessories stored in dedicated drawers. Kjdpfx Ae Abal Rokwonc Technical Condition Used industrial machine from a production environment. The machine is installed as a complete production cell together with its peripheral equipment, material handling system and safety guarding. The machine is offered with the tooling, accessories and additional equipment shown in the photos. Additional Information • Complete production cell available • Wire decoiler / pay-off unit included • Long finished-part handling system included • Extensive dedicated tooling included as shown in the photos • Digital weighing equipment included • Safety fencing included • Inspection available by appointment • Sale due to plant closure • All de-installation, loading and removal costs are the buyer’s responsibility

Condition: excellent (used), Table dimensions: 1170x800 Cutting width to the fence: 100 mm Maximum cutting height: 480 mm Bearing-guided cutting blade Wheel width: 45 mm Wheel diameter: 800 mm Weight: 820 kg Year of manufacture: 1998 Knsdpezvn Sdefx Akwoc Power: 5.5 kW Speed: 690 RPM CE marking DTR manual (Declaration of Technical Requirements) Feed speed: 3.5, 5, 8, 13.5 m/min and 6, 10, 17, 23 m/min Transport dimensions: 1600x1200x2500 (height)

Condition: used, Year of construction: 2026, New demonstration machine! General technical features: - Control: 7.0" touchscreen ConnectTouch control - Cutting height and cutting angle electronically controlled, digital input of cutting height and angle (controlled positioning of the motorized axes) and movement of the motorized axes in hold mode (axis movement via push button); display resolution: 0.1 mm or 0.01°; repeat accuracy ± 0.05 mm or ± 0.005° - Weight: approx. 1,600 - 2,200 kg - Table size: 860 mm x 1,270 mm in gray cast iron, table extension as standard across the entire table width - Table height: 900 mm - Stand: The machine stand is a stable, thick-walled composite structure, implemented in this form and perfection exclusively by MARTIN. The intelligent combination of the two materials, steel and concrete, creates a high-quality stand that is unsurpassed in terms of stability, damping capacity and torsional stiffness. - Tools: Diameter 250 - 450 mm, optionally up to 550 mm, main saw blade ø 30 mm with additional holes, scoring saw ø 36 mm, tool cutting width max. 20.0 mm for machines with single-sided tilting, 6 mm for machines with double-sided tilting; saw blades up to 350 mm can be lowered under the table. Special tool diameter max. 400 mm, weight max. 12.0 kg - Tool change: Quick-change system ProLock - Tool tilt: 0° to + 47°, tilting only possible with saw blades up to 6 mm cutting width - Cutting height: 0°: max. 155 mm / saw blade ø 450 mm; T7710/1: +45°: 106 mm / ø 450 mm; T7710/2: +45°: 104 mm / ø 450 mm; -45°: 88 mm / ø 450 mm; optionally 123 mm / ø 550 mm - Motor: State-of-the-art synchronous motor SynchroDrive with large power reserves in energy efficiency class IE4 - Motor power: 5.5 kW, due to its design, the motor can be overloaded several times its rated power for a short period of time and thus offers large power reserves - Speed: Continuously variable 1,000 - 5,000 rpm - Control panel: The control panel is at eye level and is rotatably mounted around its vertical axis. In addition, it can be swiveled to the right, so that larger components can also be processed easily - Rip fence: Standard length 3,000 mm, table length corresponds to cutting length; position-independent locking; guides hardened, wear-resistant, self-cleaning; table edge replaceable; made of anodized aluminum - Length stop: Made of anodized aluminum with continuous support, fine adjustment for both flap stop elements; dimension display via scale with magnifying glass; cutting length 95 - 2000 mm, extendable up to 3220 mm - Cross table: Made of powder-coated steel, workpiece support in anodized aluminum, two sliding supports for extending the support area; length stop can be placed in the front and rear position without lifting; one-hand clamping on the support surface 1340 x 650 mm - Surfaces: Stand: Stand with high-quality powder coating, Cast iron: Table surface finely milled, Aluminum: Aluminum components anodized - Protective cover / extraction: Height-adjustable protective cover incl. interchangeable rear part for miter cuts; protective cover for saw blades up to ø 450 mm (optionally 550 mm); extraction connection on the cover: Ø 80 mm, on the machine stand Ø 120 mm; total extraction connection Ø 140 mm; minimum air volume: Vmin 18.5 m3/min at 20 m/s, negative pressure 1,400 Pa - Electrical equipment: Contact for controlling the extraction; motor protection switch and winding protection, undervoltage protection; lockable main switch, 2 EMERGENCY STOP buttons (control panel, stand) Knedpfx Akjz A Hh Ujwec

Condition: used, Fixed table 850 x 1100mm in grey cast iron - Table height 900mm - 3.3m sliding table, anodised aluminium construction, wear resistant tempered guides with self cleaning design. Replaceable table edge. Infinitely locking design - Min / max blade dia 250mm - 400mm giving 130mm max cutting height at 90 degrees 30mm bore with 2 x 8mm drive pins / 60mm ctres. - 5.5kw motor 4000 / 4800 / 6000 rpm rotation speed - Blade tilting up to 46 degrees - Power rise / fall / tilt, with rapid and slow creep movement - Riving knife mounted saw guar - Pro lock quick change system of the saw blade - Rip fence with easy sliding movement thanks to four grooved ball bearings. Micro metric adjustment and scale. Movement via handwheel Kedpfxoz N Hcms Akwonc - Cutting width - blade to rip fence 1350mm - Cross cut fence in anodised aluminium with continuous support, micro adjustment for both flip stop. Cutting length 95 to 2000mm, can be extended to 3220mm - Cross cut table in galvanised steel construction - Operating controls easily accessible on main frame - Dust extraction connection 100mm on overhead guard and 120mm dia in machine frame - 2 x riving knives 3.5" TFT overhead control unit at eye level with keyboard. - Electronic control of cutting height / cutting angle in program memory - Tool calculation including storage of 50 blades - Memory of 10 cut lists each with 50 cutting lines - FK for shortcut to frequently used functions - USB interface -2 axis scoring saw electrically adjustable. Scoring saw height and left / right position can be electrically adjusted while blade is running. Pneumatic lifting / lowering - Handndwheel adjustment of the rip fence and digital indication in control panel - 1 x 350mm dia main blade and solid scoring blade - 3.3m sliding table - Parallelogram crosscut table with analogue stop - LCD readout of angle setting

Condition: used, Year of construction: 2014, functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,500 mm, spindle speed (max.): 6,000 rpm, CNC control: HEIDENHAIN iTNC 530 (HSCI) with a 15.1" flat-screen display and a pivoting control panel 2. Work table / Clamping surface Length: 2,200 mm Width: 1,000 mm Maximum transport load: 7,200 kg Number of T-slots: 7 Size of T-slots: 22 H12 mm Reference slot: 22 H7 mm T-slot spacing: 140 mm Knedpfx Ajz Tugbekwsc 3. Automatic milling head (Option -AIH60A OIL) Design: Diagonal, swiveling in 2 planes Speed range: 0 – 6,000 rpm (Option) Tool holder: DIN 69871 AD (ISO 50) / Taper DIN 69871 Draw bolt: DIN 69872 Form A Tool clamping force: 15,000 N Lubrication: Automatic grease cycle lubrication (housing made of steel cast GS 60, designed for 45 kW and max. 2,000 Nm) 4. Main spindle drive motor / Manufacturer: Siemens, main spindle drive, Type: 1PH7 Drive power max. (Option): 36 kW from 376 rpm (standard equipment 30 kW) Maximum torque (Option): 930 Nm (constant up to 376 rpm; optional in gearbox up to 1,460 Nm or 1,750 Nm) Speed control / Gearbox: 3-stage (oil-cooled) with automatic switching and helical gears made of hardened chrome-nickel steel Spindle speeds (6,000 rpm Option): Low range: 0 – 984 rpm Medium range: 918 – 2,456 rpm High range: 2,404 – 6,000 rpm 5. Axis drives and axis feeds Axis drive motors: Manufacturer Siemens (digital AC drives) Rapid traverse max. (X/Y/Z axis): 15,000 mm/min Working feed max. (X/Y/Z axis): 12,000 mm/min Feed force max. (X/Y/Z axis): 24,000 N Measuring system: Linear measuring system “Heidenhain” (0.001 mm) in all axes Machine weight: approx. 17,000 kg Connection power: approx. 54 kVA Materials: Machine bed, work table, machine frame and vertical slide made of lamellar graphite cast iron GG30; milling slide made of nodular graphite cast iron GJS-600 Guide rails: Hardened and ground with Turcite B sliding strip coating (in X/Y/Z) Hydraulic system: Manufacturer Rexroth (including hydraulic weight compensation in the vertical axis) Lubrication & cooling: Automatic central lubrication of axes/ball screws, control cabinet with lighting and air conditioning unit Additional control: Portable electronic handwheel “Heidenhain HR-410” with axis selection, additional electric foot pedal for manual tool change Enclosure & Safety: 4-sided splash guard enclosure with large sliding doors, safety switches (CE compliant) and safety fencing for the rear.

Condition: used, Features Siemens IE3 type electro magnetically braked motors All spindle motors with Star delta starting system Edge reference straightening system 65 mm high fences Telescopic bedplates between vertical spindles Infeed side pressure unit Double side pressure unit opposite fence side head moving with near side head with pneumatic loading Adjustable side guides after near side head Pad pressure after top head with vertical screw adjustment and mechanical digital readout 2000 mm pre-straightening infeed table with fence each 10 mm adjustment 40 mm diameter spindles belt driven, with spindle speed of 6000 rpm All spindles have horizontal and vertical adjustment, with mechanical digital readouts for fast and accurate setting Independent manual vertical adjustment to top head High precision spindle units with high speed bearings All bedplates and fences have 0.3 mm hardened chrome HRC at 60° Automatic bed lubrication system with timer control Chipbreaker assembly before first and second top head with twin cylinder pneumatic loading One piece heavy duty cast iron main frame with optimum vibration absorption Centralised lubrication system to all main slides Vertical spindles have 80 mm vertical adjustment Kodpfxjz Il Tgj Akwjnc Horizontal spindles have 40 mm horizontal adjustment Safety interlock at infeed to prevent feeding oversized material ATS electronic positioning by keypad control and motorised adjustment to near side spindle horizontal movement with dual LED measurement display for tool compensation to give radius and actual cutting sizes (Model REC-705B) ATS electronic positioning by keypad control and motorised adjustment to first top spindle vertical movement with dual LED measurement display for tool compensation to give radius and actual cutting sizes (Model REC-705B) – additional LED dual readout display Type REC-720 positioned at first top head ATS electronic positioning by keypad control and motorised adjustment to second top spindle vertical movement with dual LED measurement display for tool compensation to give radius and actual cutting sizes (Model REC-705B) – additional LED dual readout display Type REC-720 positioned at second top head Note: The REC-720 LED dual readouts are linked together with the main REC-705B controller so that they both read the same whether the spindle is adjusted from the top head position manually or at the infeed controller with motorised adjustment – both top heads move together. Lift up sound and safety enclosure including internal lighting and safety interlocks Interlock to lift up enclosure Dust extraction hoods outlet diameter 150 mm Toolkit Instruction and maintenance manual, electrical diagram and parts list. Machine supplied with electrics arranged 3/50/415 V 1 no. CE Pressure Regulator Machine conforms to CE specification

Condition: used, Year of construction: 2011, Slider length: 3000 mm Cutting width with fence: 1000 mm Cutting width with rip fence: 3200 mm Cutting depth: 154 mm Scoring saw: yes Saw blade height adjustment: electric / position control Saw blade swivel adjustment: electric / position control Fence adjustment: electric / position control Knodpfx Akezdza Dswjc Rip fence adjustment: manual Saw blade angle display: digital display Cutting height display: digital display Fence display: digital display Rip guide display: scale Rip guide with miter function: yes Saw blade diameter: 450 mm Speeds: Vario Motor power: 5.5 kW Dust extraction port: 80 and 120 mm Machine length: 3200 mm Machine width: 2000 mm Weight: 1200 kg

Condition: new, CATALOGUE NUMBER RE060 - New machine TECHNICAL DATA - Blade diameter ⌀250 – 350/30 mm - Scoring blade diameter (only works with ⌀300, 350 mm blades) ⌀120/20 mm - Main motor power 4 kW - Scoring motor power 0.75 kW - Rotational speed 4000 rpm - Scoring blade rotational speed 8800 rpm - Blade tilt 0 – 45° - Max. cutting length 1600 mm - Cutting width with parallel guide 1250 mm - Sawtooth blade ⌀350 mm - Arbor flange diameter 87.5 mm - Table fence adjustable to 90° – 45° angle, accuracy ±1° - Max. cutting height with ⌀300 mm blade, 95 mm Knjdpfx Aozrk N Rokwoc - Max. cutting height with ⌀350 mm blade, 120 mm - Upper dust extraction port diameter ⌀80 mm - Lower dust extraction port diameter ⌀100 mm - Weight 480 kg - Dimensions of folded machine 2020x3380x1200mm Net price: 16000 PLN Net price: 3721 EUR Net price calculated based on an exchange rate of 4.30 PLN/EUR (Prices may be subject to change in case of significant exchange rate fluctuations)

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, For sale is a robust Lazzari Juno 320 panel saw in a heavy-duty industrial design. This machine is ideally suited for professional use in carpentry, joinery, and interior design. Thanks to the easy-to-use sliding table, the generously sized machine table, and the 45° swivel function of the saw blade, the machine enables precise longitudinal, cross, and miter cuts. Technical data: Manufacturer: Lazzari Type: Juno 320 Year of manufacture: 2001 Main motor: 5.5 kW Voltage: 400 volts Speed: 3,200 / 5,000 rpm Cutting length / table length: 3,200 mm Knjdezn N Ukepfx Akwjc Table width to the right of the saw blade: 1,250 mm Machine weight: approx. 750 kg CE version Equipment: Sliding table 3,200 mm Saw blade, 45° tiltable Mechanical height and swivel adjustment Parallel fence with fine adjustment Angle/miter fence with scale Generously sized machine table Robust aluminum guide Control panel with emergency stop Speed control 3,200 / 5,000 rpm Heavy-duty industrial design Precise guide systems Dust extraction connections Ideally suited for: Solid wood processing Panel cutting Furniture making Interior design Carpentry and joinery workshops Series and individual production The machine is in good, used condition with the usual age-related signs of wear. It impresses with its stable design, high cutting precision, and reliable industrial drive. Inspection and a test run are possible at any time by appointment. Transport is possible for an additional charge! The machine will be inspected before sale. For used machines manufactured in 2009 or earlier, the warranty is excluded when sold to commercial customers. Technical data and equipment may vary. Errors, prior sale, and changes are subject to change. All information without guarantee.

Condition: used, Year of construction: 2022, Exhibition machine Year of manufacture: 2022 Equipment and technical data: > Solid German engineering for jointing and rabbeting, including concave and convex profiling > Adjustable rabbet depth for PLANER WIDTH up to 510 mm and max. chip removal up to 8 mm > Ergonomic working position directly at the cutterblock > Panhans four-knife cutterblock with strip-type planing knives and adjustment tools > Finely planed cast iron table, total table length 2850 mm > Control panel at eye level with digital display of chip removal, current outfeed table position (neutral, concave and convex profiling), including template holder and practical tool storage > Electrically adjustable infeed table via push buttons > Concave and convex profiling adjustment on the outfeed table > Toothed table lips for noise reduction > Adjustable fence in depth and angle via a single lever, adjustable up to 45° and mounted in an extremely smooth steel guide > Anodized fence ruler > Swivel auxiliary fence type 1545 > Console for feed mechanism > Bridge guard TXF type 1570 with folding cover > Automatic star-delta starter, motor circuit breaker > Planed in our workshop Planer width: 510 mm Ksdpezz Tznjfx Akwonc Infeed table length: 1620 mm Outfeed table length: 1170 mm Total table length: 2850 mm Motor power: 5.5 kW / 7.5 HP Cutterblock speed: 5000 rpm Dust extraction port: 160 mm Voltage: 400 V / 50 Hz Footprint: 2850 x 1420 mm Color: Light gray RAL 7034 and violet-blue RAL 5000 Weight: approx. 1050 kg Includes: Full steel Tersa cutterblock > Automatic motor brake Location: Flörsheim Availability: Short notice

Condition: new, Year of construction: 2024, New machine Year of manufacture: 2024 Equipment and technical data: · Wheel diameter: 600 mm · Belt speed: 1550 m/min · Cutting height: 400 mm · Cutting width: 580 mm · Maximum blade length: 4735 mm · Minimum/maximum saw blade width: 15 mm / 30 mm · Optional, with special coating: minimum/maximum saw blade width: 8 mm / 25 mm · Table size: 810 x 590 mm · Table height: 920 mm · Dust extraction port: 2 x Ø 100 mm · Motor power: 2.2 kW / 3 HP · Voltage: 400 V / 50 Hz · Color: RAL 7035 light gray and RAL 5000 violet blue · Net weight: approx. 275 kg TECHNICAL DESCRIPTION · Solid German engineering · Machine stand in aesthetically pleasing, modern, torsion-resistant double-chamber steel welded construction · Upper and lower doors secured via limit switches · Upper and lower precision band saw blade guide APA 2, size 2 · Finely planed gray cast iron table · Table top can be swiveled up to 45° · Dynamically balanced band saw wheels with vulcanized rubber tires · Fence rail on the left side of the saw blade can be used; fence profile can be folded down · Blade tension indicator · 1 saw blade 4735 x 25 x 0.6 mm, tooth spacing 9 mm, No. 3780.250D Ksdpo Aa Ea Dsfx Akwenc · Mechanical height adjustment of the saw blade guard via handwheel with locking ratchet · From 2.2 kW - rotary cam switch with direct start and emergency stop button · From 3.0 kW - rotary cam switch with star-delta start and emergency stop button · Mechanical motor brake with main switch and motor protection relay · CE compliant including transport pallet including preliminary freight to 65239 Hochheim Availability: short-term Location: Flörsheim

Condition: excellent (used), Year of construction: 1994, Josting Veneer Package - Cutting Machine Type: EFS 2300 L - Year of manufacture: 1994 Cutting length: 2,300 mm Stack height, max.: 80 mm Safety light curtain by FIESSLER Guide light for displaying the cutting position Parallel fence, motor-adjustable, with fine adjustment via handwheel Connected load: 7.7 kW Weight: 2,700 kg Dimensions: 3,610 x 1,700 x 1,680 mm Kedezzf Erspfx Akwjnc Available from: - Warehouse in 54634 Bitburg - Immediately available -

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, power: 7.35 kW (9.99 HP), input voltage: 400 V, input frequency: 50 Hz, cutting height (max.): 105 mm, cutting width (max.): 1,300 mm, saw blade diameter: 350 mm, rotational speed (max.): 4,000 rpm, total length: 4,300 mm, overall weight: 1,300 kg, cutting length (max.): 3,200 mm, pivoting range: 45 °, The Concept 350 combines the advantages of various saw systems: As flexible as a panel saw, the cutting quality of a pressure beam saw, and as ergonomic as a trimming saw. This is the sawing concept for modern industrial production. The machine is a leasing return. Ksdowzuipopfx Akwsnc Further technical data: - Motorized rip fence with 4 aluminum stops, which move synchronously - Screen control with 8" touchscreen - Air requirement: 6 bar - Sliding table: 1,000 x 400 mm (extension table) - Outrigger table size: 3,200 mm with 2 digital stop jaws - Extraction connection: 1 x 100 mm, 1 x 120 mm - Feed speed: 0 - 40 m/min Special features: - Programmable saw blade height adjustment - Mitre fence +/- 50° - Cutting line laser - Additional support table 800 x 200 mm With the new Concept 350, you no longer need a panel saw! The workpiece rests on the machine and is positioned precisely with a pressure beam. The saw unit can be swiveled from 90° to 45°, is guided with precision, and cuts your workpiece at a constant feed speed of 0–40 m/min, ensuring the best possible cutting results. The standard crosscut fence enables quick cutting to length and efficient operation, with significantly less space required compared to any sliding table saw! Advantages over a sliding table panel saw: - Significantly less space required - The pressure beam secures the workpiece on the machine and guarantees optimal cutting results - The pressure beam prevents the operator from reaching into the saw blade - Ergonomic operation, as the operator no longer has to push the material through the saw blade - Time saving, as the operator does not need to guide the material during the sawing process Including delivery and installation within postal code areas 71, 72, 73, 77, 78, 79, 86, 87, 88, 89.

Condition: good (used), Machine Security Fencing Knodpfx Aepy Ei Uekwoc Dimensions approx 3000mm x 4000mm Complete with entry gates

Condition: used, Year of construction: 2022, PANEL SAW WITH TILTING SAW BLADE Linvincibile SI 5 KEY FEATURES SLIDING TABLE: GUARANTEED SUPERIOR CUTTING QUALITY OVER THE LONG TERM TELESCOPIC ARM: AN “UNBEATABLE” SMOOTH MOVEMENT SAW UNIT: FOR A PERFECT CUT Technical Data SI 5 Main saw blade diameter (mm): 550 Cutting capacity with extendable fence - with table 3200 mm - with table 3800 mm 3200x3200 3800x3200 Saw blade tilt (degrees): 46 Max. cutting height at 90° (mm): 200 Max. cutting height at 45° (mm): 130 Saw blade speed (rpm): 2500-3500-5000 Scoring blade speed (rpm): 8500 - Extractor port diameter: - on frame - on blade guard 120 100 Main motor power [S6 -40%] Hz50 kW: 7 Scoring motor power [S6 -40%] Hz50 kW: 0.9 Cutting width at rip fence (mm): 1600 Standard equipment and accessories - Optimizer/Process control app for tablets: SCM Thundercut. The app can be downloaded from the App Store or Play Store for tablets compatible with iPadOS or Android. It can be activated via the QR code supplied with the machine. The app enables: * Management of machine fleet and material/panel storage * Creation and editing of projects, importing projects from main furniture design software (file format "cpout"), importing cutting lists * Optimization of cutting lists by selecting one or more proposals from the optimization software integrated into the app * Correct machine settings for each cut, thanks to the simple and intuitive graphics of the 3D sequencer, guiding the operator step by step * Printing barcode labels to identify the various parts, via Bluetooth connection with compatible label printers. - 10-year warranty on the sliding table guide system - Sliding carriage entirely made of aluminum structure with guidance on crimped, hardened and arc-ground steel rails with large contact area - Max. saw blade diameter* up to 450mm with scoring blade mounted* up to 550mm without scoring blade - eye-S 15" electronic control including: * 15" touchscreen monitor * Direct control of the following working axes with manual, semi-automatic, automatic, and incremental modes: - Height adjustment of the main saw blade - Tilt adjustment of the saw unit - Rip fence adjustment - Height and lateral adjustment of the scorer (the scorer is automatically raised to the set position on activation and lowered on deactivation) * Operator assistance functions for complex cuts * Ability to store up to 1000 programs with associated image * Ability to store up to 1000 different tools with associated image * Cutting process management of preloaded parametric machining programs * Environment for creating and storing new sequenced working programs * Automatic import of working dimensions from Thundercut app * USB port * Ready for network connection - Auxiliary function of the electronic control, including: * Determination of correct fence position on rip fence for format processing with tilted saw blade * Determination of correct fence position on rip fence for angle cuts with mitre fence on the work table with or without tilted saw blade - Pivoting control panel above the table - Scoring unit with independent Ksdpjz Hb Nbjfx Akwonc

Condition: excellent (used), Casadei F250M, SCM, vertical spindle shaper Spindle adjustable up-down and at an angle from -5 to +45 degrees electrically Spindle bore: 30mm Long work tables, 240cm with extension Adjustable fence with AIGNER guides 4-roller feed system 5 spindle speeds 7.5KW motor Left-right rotation Spindle lock Brake Knsdpjyt Hpkefx Akwec Very good condition, machine inspected and fully ready for operation. Width 263cm, length 140cm, height 196cm, weight 900kg

Condition: excellent (used), Panel saw HOLZ-HER 1255 - used - Welded frame with extremely high rigidity, pneumatically retractable spacer, stable locking of the saw carriage at the top and bottom, locking in vertical cutting is electrically monitored, foldable plunging lever on the saw unit, retractable splitting wedge for cut-outs, control panel at eye level, digital display on the length stop, digital display for horizontal cutting, rip fence device, lifting roller transport system, adjustable support, dust extraction system TRK, dust-tested ----- Technical data ----- Cutting length: 5300 mm, Cutting height: 2200 mm, Trimming height: 2100 mm, Cutting depth: 60 mm, Minimum height on folding rail: 120 mm, Saw blade Ø: 250 mm, Motor: 4 kW, Dust extraction connection Ø: 120/100 mm, Compressed air: 6 bar, Space requirement (LxWxH): 6500x1650x3050 mm, Weight: 900 kg Knodpfx Akjyyzp Howoc Quality information: - Guide rails renewed/reconditioned - complete basic inspection - complete basic cleaning - electrical system checked - immediately ready for use

Condition: used, Year of construction: 2018, operating hours: 6,442 h, Technical Data Working Area Axis Travel - X-axis: 4000 mm - Y-axis: 1970 mm - Z-axis: 455 mm Machining Area - X working area: 3000 mm - Y working area: 1550 mm - Z clearance: 250 mm Axis Systems - X-axis: Helical rack and pinion drive - Y-axis: Precision ball screw drive - Z-axis: Precision ball screw drive - Linear guides on all axes - Automatic central lubrication Main Spindle - 5-axis electro spindle - Type: 5-axis spindle with universal joint - Power: 12 kW (S6 operation) - Tool holder: HSK F63 - Maximum speed: 24,000 rpm - Ceramic bearings with air cooling - Full power available at approximately 12,000 rpm - Speed range: 1,000 - 24,000 rpm - Clockwise rotation - Integrated tool changer interface - Liquid-cooled spindle - Electrically controlled extraction hood - Maximum tool weight: 6 kg - Maximum saw blade diameter: 350 mm Tool Changer System Kedpfxjzuw E Rj Akwonc 12-position linear tool magazine - Mounted on the left side of the machine frame - Separate station for tool changers - Maximum tool diameter: 250 mm - Maximum tool length: 240 mm 18-position disc tool magazine - Mounted on the gantry - Suitable for drilling tools and tool changers - Maximum tool diameter: 250 mm - Maximum tool length: 280 mm Drilling Aggregated Head DH18 6H 1S drilling head - 12 vertical spindles: 7 spindles in the X direction, 5 spindles in the Y direction - 4 horizontal spindles in the X direction - 2 horizontal spindles in the Y direction - Drilling stroke: 70 mm - Maximum drilling depth: 70 mm - Tool holder: 10 mm - Individual control of the spindles - Integrated slotting saw - Saw blade diameter: 120 mm - Maximum slotting saw blade thickness: 5 mm - Speed up to 7,500 rpm Vacuum and Clamping System Console Table - 6 consoles with front and rear stops - Wireless two-circuit vacuum system - Height of vacuum cups: 100 mm - Pneumatic console locking - Programmable pneumatic stops - 4 adjustable side stops - Reinforced support arms - Load-bearing capacity of the support arms: 40 kg each Vacuum Pump Capacity: - 90 m³/h at 50 Hz - 108 m³/h at 60 Hz - Additional vacuum connection for template machining - Controlled compressed air connections for frame clamps - Separate vacuum and compressed air switching for all consoles WoodFlash Software Package Control Panel - Complete machine operation via the CNC panel - Program creation and editing - Tool and workpiece management - Manual machine commands - Monitoring of vacuum, compressed air and safety systems Mobile Control Panel - 24" LED monitor - Keyboard and mouse - USB connection Operator Device for Feed Rate - Manual feed override potentiometer - Variable feed rate adjustment during machining Safety Devices - CE safety system - Safety mats instead of light curtains - Emergency stop system - Protective fence on the left side - Safety monitoring of the doors - Sensors to monitor vacuum and compressed air Optional Equipment - External release switch - Protected energy chain system - Additional locking for A and C axes - Saw blade changing station on the gantry - Operating hours: 6442 hrs.