5
adjustable gear motor, variable speed gear motor, electric motor
-Manufacturer variable speed gear type: SK01-R1000-/1/L/4
-Motor power: 0.37 kW
-Speed range: 33-165 rpm
-Motor: adjustable
-height of the shaft axis: 100 mm
Ukun7zxzz
-Construction: B3
-Drive shaft: Ø 20 mm
-Number: 1 piece of motors available
-Price: per piece
-Dimensions: 505/320/H195 mm
-Weight: 23 kg
3
Load capacity: 60.000 kg; Gripper: 2005 - 4500 mm
F90feg2
15
2
HM adjustable groove cutter LEITZ 20627 4-7,5mm
very good condition, as good as new
diameter 150mm
the cutter is infinitely variable from 4mm - 7,5mm
for 30mm spindle or holder
can mill approx. 25mm deep
for speeds up to 9000 rpm
for manual feed, with BG-test
with the milling cutter you can mill grooves from 4mm to 7,5mm up to 25mm deep
the cutting edges are OK and sharpened, without gaps or breakouts
with large resharpening zone, the cutter can be resharpened several times
was used only little ...
3
adjustable microscope for ESKOMATIC D6
Bzo9ypfc3k
2
No. 449
second hand
Make Stehle
Dimensions 150 mm x 4-14 mm x 30 mm
HM
BG test
Circle diameter approx. 150 mm
Hole about 30 mm
Pquw7
Groove width adjustable approx. 4-14 mm
Storage location 97447 Gerolzhofen, free on truck, unpacked
Handover in the current condition as viewed,
without guarantee and warranty
5
adjustable gear motor, variable speed gear motor, electric motor
-Manufacturer variable speed gear unit SEW type: D14DT80K-6TF
-Motor power: 0.37 kW
-Speed range: 235-1157 rpm
-Motor: adjustable
-height of the shaft axis: 130 mm
Lxbsb
-Number: 1 piece of motors available
-Price: per piece
-Drive shaft: Ø 19 mm
-Dimensions: 480/273/H240 mm
-Weight: 25 kg
3
Double sided mitre fence
for fast and stepless production of mitre cuts on narrow and short
narrow and short workpieces at any angle from 0° to 90°.
Bbyst9070
for cutting to length up to 1375 mm
easy handling and quick mounting on the rolling carriage of the saw
suitable for Panhans models 680_10_20
conversion kit for other models on request
availability: short term
Storage location: Hochheim
9
Cutting saw for halving round timber into fence slats etc.
up to 140 mm diameter. With automatic crosscut saw.
V - guide of the logs with feed and pull-out unit.
Saw motor 7,5 KW. Crosscut saw 3 KW.
S80f3x
With extraction belt and ejector.
6
4 pieces adjustable clamping jaws for faceplate
Pprnh
lathe chuck, mechanical clamping device, clamping block
Chuck jaws
jaw width 100 mm
Jaw length 300 mm
jaw height 142 mm
- Step jaws for turning as turning and drilling jaws
- Jaw adjustment via trapezoidal thread spindle
- Jaw carrier with 6 bores Ø 33 mm and 36 mm guide groove
- Jaw carrier bore spacing 140 / 140 x 220 mm
Dimension L x W x H 450 x 300 x 280 mm
Weight per jaw 100 kg
weight all 4 jaws 400 kg
good condition
11
OFFER 21334
Aluminium mitre circular saw with stop system
Technical data:
- Saw blade diameter 400 mm
- motor speed 2800 rpm
- Cutting range at 90° approx. 60 x 60 mm
- Mitre Li + Re. 45 - 90 - 45 °
- Compressed air supply 6 - 8 bar
Bzon88odut
- Air consumption per working cycle 10 L / min
- Drive 400 V / 1,5 kW
- space requirement approx. W 13000 x H 1500 x D 1500 mm
- weight approx. 1000 kg
- with: - pneumatic saw blade feed
- pneumatic clamping vices
- pneumatic coolant check de...
1
No. 450
Pqk27
second hand
Make Stehle
HM
permanently equipped
BG test
Flight circle diameter approx. 150 mm
Hole approx. 30 mm
Groove width adjustable approx. 4 - 7.5 mm
Storage location 97447 Gerolzhofen, free on truck, unpacked
Handover in the current condition as viewed,
without guarantee and warranty
5
adjustable gear motor, variable speed gear motor, electric motor
-Manufacturer gearbox Lenze type: 11.112.02.10
-Manufacturer Motor Lenze type: 4AP71-8
-Motor power: 0.12 kW
-Speed range: 1.5-9 rpm
Klnhem0b
-Motor: adjustable
-Construction: B3
-height of the shaft axis: 100 mm
-Number: 1 piece of motors available
-Price: per piece
-Drive shaft: Ø 25 mm
-Dimensions: 660/200/H210 mm
-Weight: 18 kg
15
4
Transnorm inclined roller conveyor 3130-840-1180
RA1865
Make: Transnorm
Roller width (RB): 840 mm
Nominal/outer width (NB): 1180 mm
Length: 3130mm
Diameter rollers: 50 mm
Distance between rollers: 55 mm
Roller conveyor motor: SEW drive motor
frame height: 210
410 mm side guide with 200mm belt conveyor included
Conveyor speed: freely adjustable with frequency converter
Optionally available:
Supports: 70,00 Euro p. piece plus VAT.
frequency converter for the two SEW motors:500 Euro p. piec...
double spiral
wire diameter 1,6-3,8 mm
Nszu7
mesh width 50x50 mm
working width 3000 mm
capacity 170 m²
tooling for mesh width 50x50 + 40x40
15
Welding rotary table Air Liquide 2,5 tons
hydraulically height adjustable
Cjtx899us
with hand and foot remote control
speed infinitely variable with digital display
like new
Weight 1750 Kg
1
including telescopic stop
Bwgcerdcsa
including 2 folding stops
No. 3380132
5
adjustable gear motor, variable speed gear motor, electric motor
Ukuq7fqcd
-Manufacturer gearbox Lenze type: 11.431.10.08.1
-Manufacturer motor EMOD type: EEDF71L/6
-Motor power: 0.25 kW
-Speed range: 8.1-43 rpm
-Motor: adjustable
-height of the shaft axis: 80 mm
-Number: 1 piece of motors available
-Price: per piece
-Drive shaft: Ø 20 mm
-Dimensions: 380/330/H140 mm
-Weight: 16 kg
3
- Load capacity rotating stand: 1.000 kg
- Machine body: Sheet metal construction made of quality steel,
- length/width 1.000mm x 1.180mm
- height 2.220mm
- Stroke face plate (vertical): 700-1.400mm
- diameter of face plate: 600 mm
- Chuck: M-WPS500
- Machine weight (DSH): 1,400 kg
- Face plate speed: 0.1- 2 rpm
Operation
on the control cabinet: Selector switch: Turn foot switch or
Button on the control cabinet
Turn: LEFT/RIGHT
Lift: UP/DOWN)
Potentiometer for infinitely vari...
6
Transnorm adjustable inclined roller conveyor 3500-950-900
RA1864
Make: Transnorm
Roller width (RB): 900 mm
Nominal/outer width (NB): 950 mm
Length: 3500mm
Diameter rollers: 50 mm
Distance between rollers: 54 mm
Roller conveyor motor: SEW drive motor with frequency converter
frame height: 145
410 mm side guides included
The roller angle is easily and quickly adjustable between 6° and 10° with an adjusting screw
Conveyor speed: freely adjustable with frequency converter
Bx8kecwsjy
Optiona...
1
double spiral
wire diameter 1,5-3,8 mm
Pufuhi
mesh width 20-80 mm
working width 3000 mm
capacity - m²/hour 150 m²
tolling for mesh 50 mm
1
Adjustable 2 - locker Balasubramanian cutterhead Fabr. VICTORY hole and SCHNIEDER type V1302
22594 Fabr.# year 1994
Technical data:
Drilling capacity ST 50 13 mm
KL. 34 mm
Speed 1:1
Erl Spindle Center distance 130 mm
Bzt3fab
with
-Clamping tongs recording
-Mounting flange
used, in very good condition
2
No. 480
screwed to the socket including intermediate rings
second hand
Dimensions 150 mm x 7.0-13.0 mm x 40 mm
mechanical feed
Circle diameter 150 mm
Hole approx. 40 mm
Blade width approx. 6.5 mm x 2 mm
Groove width adjustable approx. 7 - 13 mm
Storage location 97447 Gerolzhofen, free on truck, unpacked
Handover in the current condition as viewed,
Pv3jxu
without guarantee and warranty
5
adjustable gear motor, variable speed gear motor, electric motor
U0lpb82vw
-Motor power: 0.25 kW
-Speed range: 7.5-36 rpm
-Motor: adjustable
-Construction: B3
-Drive shaft: Ø 25 mm
-Protection class: IP 54
-Dimensions: 650/195/H275 mm
-Weight: 33 kg
10
600 Kg load capacity 1000 Kg load capacity
Welding rotary table adjustable in height
with through hole 100 - 200mm
plate diameter 700mm 900mm
Height horizontal min. 0,65m, max. 1,25m
height tilted min. 0,45m, max. 0,95m
speed from 0,01 - 1,1 rpm
Tilt up to 135
hand and foot remote control with speed indicator
Ppjaf
very robust
11
Capper / lid press for pressing lids (snap caps) on sealed cans. Stacks put manually on feeder of machine. When the rim of the container engages the lid, it enters a power overhead belt compression section within the lid press machine. The lid is gently pressed and sealed into place, as long as it is perfectly aligned with the grooves.
Byp8hljpws
Height-adjustable work bench with parallel blocks, make "Factory floor" with various interchangeable JAWS
Rotatable, table size: 650 x 650 mm
Height: 750-1200 mm
Bcwdngpjqz
Vise
Jaw width: 130 mm
Wingspan: 150 mm
5
Pressure capacity 50 t
table size L x W 650 x 515 mm
drop-through hole Ø 230 mm
throat 250 mm
stroke adjustable 8 - 120 mm
Stroke rate 100 / min
Drgvbgn2
ram adjustability 70 mm
Drive power 2,2 kW
dimensions L x W x H 1100 x 1400 x 2220 mm
Weight approx. 3000 kg
Accessories / special features:
- Adjustable table
- Foot release
This eccentric press is only approved for safe tools or fixed shielding.
Siegfried Volz Machine Tools
Rüschebrinkstr. 151 - 153
D - 44143 Dortmund - Wambel
2
Make Guhdo
used, great condition
HM
permanently equipped
Dimensions 250 mm x 10.2 - 20 mm x 30 mm
Number of cutting edges 4/8 pieces
Pre-cutter 4/8 pieces
Brgiupohd8
Storage location 97447 Gerolzhofen, free on truck, unpacked
Handover in the current condition as viewed,
without overhaul,
without guarantee and warranty
5
adjustable gear motor, variable speed gear motor, electric motor
Lw9w9
-Motor power: 0.55 kW
-Speed range: 8-72 rpm
-Motor: adjustable
-Drive shaft: Ø 22 mm
-Protection class: IP 44
-Price: per piece
-Number: 1x available
-Dimensions: 650/203/H220 mm
-Weight: 30 kg
15
Welding rotary table height adjustable 6 tons load capacity
Complete set with hand and foot remote control
Dmly7ht
Welding current transmission 600 Ampere
Speed 0.01 to approx. 1.1 rpm
Height tilted min. 1000 mm
Height tilted max. 1950 mm
Height horizontal min. 1025 mm
Height horizontal max. 2015 mm
Length 3000 mm
Width 1950 mm
1A condition
several turntables of the same type are available:
- 2 x TC 2
- 1 x TC 3
- 2 x TC 4
6
Hydraulic notching machine make BOSCHERT type K 30-180/ CNC
year of construction 1989
for notching all angles from 30° to 180
technical data:
cutting capacity steel ST 40 4 mm
Cutting capacity stainless steel 3 mm
Blade length 200 mm
Cutting length 200 x 200 mm
W3cgybuvk
Cutting angle adjustable 30 - 180
table height 900 mm
electrical connected load 8 KVA
hydraulic oil filling 30 litres
outer dimensions L x W x H 1500 x 1000 x 1930 mm
weight 1950 kg
without stop
with
- control PC 2000 for settin...
3
2 T - grooves in the table 30° - 140°
2 side stops with scale and groove for attachable back stop
Cutting depth adjustable
Knife for stainless steel built in
Foot switch
Selector switch for single step or step by step operation
2 mechanical hold-downs
Cutting gap adjustment automatic
Bu2a0froqp
Knife length (mm) 220
Cutting capacity R = 42Kg/mm2 6,5
Cutting capacity: R = 60Kg/mm2 5
Strokes/minute: at max. length 50
Strokes/minute: at 50 mm cut 80
Working height (mm) 900
Oil tank capacity 35
Engi...
3
Positioner ABB IRBP 2000L
Handling capacity 2000kg
Two head units ( motor/gearbox/plate/stand) available
One ( 1pcs) adjustable tailstock available.
By8vfzl8c0
Adjustable L= 2800mm
6
Adjustable log house cutter from Krüsi 230mm /41-80mm/30 -2 pcs .
Cxszcw8qs
Aluminium .
5
adjustable gear motor, variable speed gear motor, electric motor
-Manufacturer engine AEG type: AD80N8/4
-Gearbox manufacturer Prym type: L8-U16P
-Motor power: 0.25/0.55 kW
Cjk3xi3w3
-Speed range: 10 to 100 rpm
-Motor: adjustable
-Construction: B3
-Drive shaft: Ø 24 mm
-Dimensions: 550/315/H220 mm
-Weight: 33 kg
15
Welding turntable hydraulic height adjustable, 10 tons load capacity
Condition as new, little used
rotation speed 0 - 0,6 U/min
tilt angle 0 - 135 °
height adjustment min. 1100mm - max. 2300mm
table diameter 2000mm
motor drive 3 KW
Welding ground connection 1000 Ampere
Self-locking gear, no running forward or backward with eccentric load
Speed control with frequency converter
Heavy compact construction, high stability
CE certified
External hydraulic unit and control cabinet,
can be installed sep...
3
Wire diameter range: 1,6 - 2,8 mm
Mesh width: 20 - 70 mm
Working width: max. 2.000 mm
Bk9jfc3gch
Output: max. 170 m²/Stunde
2
Double mitre fence Lachner
DGA 900
Bwj922erh3
For Altendorf 80s
9
Assembly table with adjustable support bars COMALL JOB 15/2000, new
Technical specifications:
- Contact surfaces in semi-rigid gray PVC
- Loading: 180 Kg
- Four length wise sliding supporting bars, clamping system through handle
- Pneumatic system with two pneumatic connections
- Hardware boxes, 6 pcs.
Crubibt3
- Extensible support, equipped with two longitudinal sliding bars
10
Length: 1400mm
Width: 80mm
U0ejh9wf
Adjustable distance between the strips: 0 - 140 mm
Manual height adjustment. max: 1500mm
0.55kW, 2.68A
Stainless steel design.
Purchase and purchase of industrial equipment and machines.
Large selection of used machines, industrial equipment.
5
adjustable gear motor, variable speed gear motor, electric motor
-Motor power: 1.1 kW
-Speed range: 350-1700 rpm
-Motor: adjustable
-Construction: B14
-Drive shaft: Ø 25 mm
-Dimensions: 515/260/H260 mm
Ukuoq3db2
-Weight: 37 kg
10
Protec KT 3000 HV, Hydraulically height adjustable
Load 3000 KG
Manual remote control with digital display
Double foot remote control
Height approx. min. 700mm horizontal, height max. 1400mm
Diameter face plate 1400mm
Angle of inclination min. 135
Speed 0,05 to 0,6 U/min.
Motor power 3 KW
Vvlhq0w
7
This is an underframe for the ivario 2-xs of the premium manufacturer Rational.
The underframe is new, unused, no longer in its original packaging.
This electrically height-adjustable base (up to 200mm) allows an ergonomic working height. Easy to operate via the device display.
Integrated pull-outs for placing containers, for easy crucible emptying.
The RRP. is: 2.540 € net
The indicated price is net, plus 19% VAT.
Service:
We are happy to arrange a certified Rational customer service from a mas...