Used Guide Fence for sale (5,611)

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 94464, travel distance X-axis: 3,400 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 155 mm, TECHNICAL DETAILS Travel range X-axis: 3,400 mm Travel range Y-axis: 1,300 mm Travel range Z-axis: 155 mm Number of work zones: 2 Dcsdpfx Abexx Rz Tjbor Drilling Head Vertical spindles X-axis: 10 Vertical spindles Y-axis: 12 Horizontal spindles X-axis: 6 Horizontal spindles Y-axis: 2 MACHINE DETAILS Electrical Data Power: 20 kW Voltage: 380 V Current: 25 A Frequency: 50 Hz EQUIPMENT Vertical electrospindle with C-axis vector, automatic tool changer, ISO 30 taper Automatic tool change system with 3 side-mounted positions for aggregates Automatic tool change system with 20 positions and chain 8 manually adjustable bars for suction cup holders with display 3 manually adjustable suction cups per bar 8 pneumatically actuated Bakelite bars for panel lifting Perimeter safety fence Motorized conveyor belt for chip extraction Vacuum pump

Condition: ready for operation (used), Year of construction: 2021, functionality: fully functional, travel distance X-axis: 860 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 550 mm, controller model: Fanuc 0i-MF Plus, spindle speed (max.): 15,000 rpm, Machining center with RoboJob Mill Assist automation, year of manufacture 2025! TECHNICAL DETAILS Travel Range X-axis travel: 860 mm Dcodpfx Abjxz A Udobsr Y-axis travel: 550 mm Z-axis travel: 550 mm Table Table size: 950 x 550 mm Maximum load: 800 kg T-slot width: 18 mm Number of T-slots: 3 T-slot spacing: 150 mm Spindle nose to table surface: 150 - 700 mm Linear Guides & Speeds Linear guides: Ball guideways X/Y, roller guideway Z Rapid traverse X/Y/Z: 40/40/30 m/min Feed rate during milling: 0 - 10,000 mm/min Minimum increment: 0.001 mm Tool Magazine Magazine positions: 30 System: random-access Maximum tool diameter: 75 mm Maximum tool diameter with adjacent slots free: 150 mm (for 40 tools: 130 mm) Maximum tool length: 300 mm Maximum tool weight: 7 kg Spindle Spindle taper: SK-40 Drive power (30min/continuous): 18.5/11 kW Speed: 15,000 rpm MACHINE DETAILS Controller: Fanuc 0i-MF Plus Dimensions & Weight Machine dimensions (W x D x H): 2,260 x 2,900 x 2,775 mm Required floor space (W x D x H): 3,160 x 3,000 x 3,000 mm Machine weight: approx. 5,400 kg Coolant, Chip, and Compressed Air Management Coolant system: 300-liter tank and pumps Chip evacuation: chip spirals right and left in the machine bed Compressed air connection: at the spindle (M32/M33) Compressed air through the spindle: (M38/M39) Compressed air and coolant gun Electrical and Pneumatic Requirements Electrical connection: 36 kVA Required pneumatic input pressure: 6 bar EQUIPMENT Prepared for fourth axis (FANUC control), incl. wiring and Harting connector (without axis driver) Bed flushing system Integrated coolant pump with 20 bar pressure Belt-type chip conveyor incl. chip trolley RENISHAW OMP-60 probe with infrared transmission RENISHAW NC4+ tool laser measurement system and tool breakage monitoring Auto-door (side door) Pneumatic interface for workpiece clamping RoboJob Mill Assist 25kg, year of manufacture 2025 Full enclosure with double gripper

Condition: ready for operation (used), Year of construction: 1993, functionality: fully functional, product height (max.): 380 mm, workpiece diameter (max.): 130 mm, production capacity: 7,200 unit/h, TECHNICAL DETAILS Number of cavities: 6 Capacity with standard bottles: up to 7,200 bph Product formats Bottle volume: 0.25 – 3.0 L Max. bottle height: 380 mm Max. bottle diameter: 130 mm Preform dimensions Max. preform length: 210 mm Dcjdpfxjx A Uu Ej Abbsr Neck inner diameter: 34 mm MACHINE DETAILS Dimensions & Weight Blow module dimensions: 2,000 x 2,200 x 2,200 mm Blow module weight: 8,000 kg Oven dimensions: 3,000 x 1,100 x 2,100 mm Oven weight: 2,000 kg Control cabinet dimensions: 1,500 x 1,000 x 2,100 mm Control cabinet weight: 1,000 kg Transformer 415V / 380V dimensions: 1,000 x 500 x 2,000 mm Transformer weight: 500 kg Preform hopper and conveyor dimensions: 3,000 x 1,500 x 3,500 mm Preform hopper and conveyor weight: 600 kg Preform feeder dimensions: 2,000 x 2,500 mm Preform feeder weight: 250 kg Infeed guide rail length: 2,000 mm Power supply Total power: 142 kW Mains connection: 380/420 V +/- 10%, 50 Hz +/- 1% Cooling water Cooling capacity: 16,000 kcal/h Water temperature: 10 – 12°C Flow rate: up to 6.0 m³/h Water pressure: 5 – 6 bar Compressed air Service air pressure: 7 bar Service air flow: 50 – 100 Nm³/h Blowing air pressure: up to 35 bar Blowing air flow for 0.25 – 3.0 L: 155 – 770 Nm³/h EQUIPMENT Transformer 415V / 380V Preform hopper and conveyor Preform feeder Infeed guides Adaptation to other voltages possible

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: V 435496, cutting length (max.): 3,700 mm, cutting width (max.): 1,100 mm, cutting height (max.): 170 mm, length stop: 3,200 mm, Equipment: scorer, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Max. cutting length: 3,700 mm Max. cutting width: 1,100 mm Cutting width at rip fence: 1,100 mm Max. cutting height: 170 mm Max. cutting height with scorer: 170 mm Saw blade diameter: 450 mm Length stop: 3,200 mm Djdpfjx Dkp Isx Abbecr Sliding table length: 3,700 mm Sliding table width: 450 mm MACHINE DETAILS Total weight: 1,800 kg Connected load: 7.5 kW (10.20 HP) Extraction port diameter: 120 mm EQUIPMENT Motor brake Scorer unit Digital cross table Digital length stop 3-axis electric scorer unit 400 mm adjustable hood arm 3.70 m edging length Laser cut line indicator Template holder Pneumatic folding circular saw fence Second support

Year of construction: 2009, condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! This machine is suitable for processing both plates and tubes. The machine will remain powered until calendar week 09/2026. By placing a bid, you commit to timely collection during calendar weeks 10 and 11/2026. The technical data is taken from the former order confirmation. The seller assumes no liability for this information. Additional details from the order confirmation can be found in the attached images. TECHNICAL DETAILS Workpiece thickness for tubes: Ø 60–500 mm, wall thickness up to 10 mm Workpiece thickness for sheet: 90% 1 mm to 20 mm, 10% 20 mm to 30 mm Max. workpiece length: 6,000 mm Effective working area: 2,000 x 4,000 mm Plasma power source HiFocus 280i HiFocus technology for mild steel: 0.5–35 mm Severance cut in mild steel (edge start): max. 64 mm Max. piercing capacity (mild steel): 40 mm Cutting current: 10–280 A Torch connection: Plasma torch connection unit Plasma gases: Oxygen, forming gas F5, argon, hydrogen, air Swirl gases: Oxygen, nitrogen, air Torch: Plasma machine torch PerCut 370 / PerCut 370M with swirl gas Dcsdpfsxywupox Abbor Machine guideway track width: 2,600 mm Machine guideway working width: 2,000 mm Feed rate: 15,000 mm/min ZINSER oxy-fuel cutting table Working width: 2,000 mm Working length: 4,000 mm Working height: 720 mm FEATURES Fume extraction system

Condition: excellent (used), Year of construction: 2016, machine/vehicle number: 0-250-95-3275, Handling concept 2, consisting of Lift table, Section bridging by roller conveyor Vacuum arm for positioning material Pneumatically lowerable stop fences Push off device Dust extraction hood for protective boards Dust extraction channel at outfeed from below Transport belt 4050 x 2250mm 14-position tool changer Simultaneous push off and infeed Table Length: 3100mm Table Width: 2250mm Thickness: 100mm X/Y: 96m/min Z: 20m/min 3 Vacuum pumps with a total vacuum capacity 900/1080m3/h 4 Pneumatically lowerable stops Dodpfxjx Ap Ako Abbscr 9Kw main spindle – liquid cooled Aggregate interface main spindle c-axis Flex 5 interface for c-axis Ait Jet integrated in extraction hood 12 vertical drilling spindles, including quick-change system Grooving saw swivelling 90 degrees Tool Change Assistance Device Tool length Control PowerTouch with power control hardware CE Weeke Quality Pack Energy Saving Mode

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: AH/105752, feed rate X-axis: 18 m/min, workpiece height (max.): 60 mm, control type: PLC-controlled, TECHNICAL DETAILS Panel height: 10–60 mm Solid wood: 15 mm PVC/ABS: 3 mm Feed speed: 12–18 m/min Working height: adjustable via PLC MACHINE DETAILS Control: PLC EQUIPMENT Adjustable panel support guide Dcsdpfx Abjxx Nf Debsr Side roller conveyor with idler rollers for panel support Rectifier group Roller holder plate Gluing unit for EVA adhesive with premelter Edge pressing group Trimming group Scribing group with overlapping motors Tiltable copy unit Rounding unit with 4 motors Edge scraper unit Glue scraper unit Oscillating brush group

Condition: used, Year of construction: 2015, functionality: fully functional, machine/vehicle number: 100007528, total length: 9,000 mm, total width: 3,000 mm, total height: 1,700 mm, type of input current: three-phase, power: 13 kW (17.68 HP), Biesse Akron 1440 A With Automatic Return Table And Conveyer, PUR Glue Pot Dsdpfx Aboxmi E Hobocr NC Controlled , Pre miller, fence, Radius Trimmer And Scraper. Edging Thickness Selectable From Pc with automatic Setting Delivery can be arrange in the Republic of Ireland

Condition: excellent (used), Year of construction: 2023, operating hours: 200 h, functionality: fully functional, total width: 600 mm, total length: 4,700 mm, load capacity: 400 kg, The FRB-P5 scissor roller conveyor from TecMaschin is the optimal solution for an inexpensive entry into goods transport without a drive. It is ideal for spaces where space is limited or fixed conveyor lines cannot be installed and allows customisation according to your needs. The roller conveyor can be extended up to 4.700 mm. In addition, curves can also be formed, flexibly guiding the goods to be transported to the desired loading position effortlessly and with minimum effort. Thanks to the height-adjustable feet (700 - 1.000 mm), the inclination of the roller conveyor can be adjusted quickly and easily, enabling parcels to be transported even on sloping or stepped surfaces. This also facilitates the unloading and loading of transport vehicles, as differences in height can be easily overcome. In addition, handling is particularly uncomplicated and flexible thanks to the small dimensions (1.920 - 4.700 mm x 750 mm x 700 mm) when pushed together and the swivel castors and brakes. The retractable handle at one end of the roller track further simplifies handling. The castors made of durable ABS are particularly light compared to steel castors, which means that the roller track only weighs 97 kg. The FRB-P5 can be loaded with a maximum of 40 kg/m². Application scenarios The roller conveyor FRB-P5 can be used flexibly in many application areas in a wide range of industries, such as parcel and courier services, mail order and the packaging industry. Optimally suited for loading and unloading trucks and swap bodies or as relief routes at peak times and for emergency scenarios. Dcodjx Dca Sjpfx Abbsr Info: To ensure the best possible transport, goods should rest on at least 3 support rollers and have a smooth floor. Ships on a treble UK pallet. Shipping is not included.

Year of construction: 2004, condition: excellent (used), functionality: fully functional, 2004 Elumatec AKS 134 Notching Saw – High-Precision Notching for Curtain Walls, Skylights & Conservatories Manufacturer: Elumatec Model: AKS 134 Year: 2004 Condition: Very Good Now available: Elumatec AKS 134 Notching Saw, manufactured in 2004 and in very good condition. This robust, German-engineered machine is purpose-built for precise notching in aluminium profiles, specifically designed for fabricators working on curtain walls, conservatories, skylights, and other complex architectural aluminium systems. The AKS 134 features a dual-saw unit design — vertical and horizontal — offering exceptional flexibility, accurate angles, and safe operation. Combined with digital angle displays, hydro-pneumatic feed, and automated cutting cycles, this is a premium choice for serious aluminium fabricators. 🛠️ Key Technical Specifications: 🔻 Lower Vertical Saw Unit: Saw Blade Diameter: 550 mm Tilting Range: +45° forward to -60° rear Max Cutting Height: 210 mm Motor Power: 3 kW (with motor brake) Speed: 2,800 rpm Manual Tilt Adjustment with Digital Display 400V, 3~, 50Hz 🔺 Upper Horizontal Saw Unit: Saw Blade Diameter: 500 mm Tilting Range: +55° down to -60° up Max Notching Depth: 190 mm Motor Power: 3 kW (with motor brake) Djdpfexyupksx Abbocr Speed: 2,800 rpm Travel Distance: up to 830 mm Manual Tilt Adjustment with Digital Display 400V, 3~, 50Hz ⚙️ Machine Features: Dual saw blades for versatile and complex notching Workpiece stays fixed – only the saw units move, enhancing precision Simultaneous vertical saw unit height adjustment via handwheel (with analogue readout) Digital angle displays for both saws and pivoting back fence Manually adjustable support table Horizontal and vertical pneumatic clamping Automatic cutting cycle at 90° with two-hand safety control for angled cuts Hydro-pneumatic saw feed for smooth, consistent cutting Compressed Air Supply: 7 Bar (35–45L per cycle) 📏 Machine Dimensions & Weight: Footprint: 3000 × 1420 × 1600 mm Weight: 1,250 kg 🏗️ Ideal For: Aluminium façade and curtain wall manufacturers Skylight and conservatory fabricators Precision aluminium notching applications Workshop environments needing multi-angle notching in high volumes 🧰 Reliable, accurate, and engineered for demanding tasks, the Elumatec AKS 134 is a proven performer in the architectural aluminium industry. Elumatec AKS 134 for sale Aluminium notching saw Ireland Curtain wall notching machine Elumatec saw for curtain wall systems Notching saw for aluminium profiles Elumatec AKS 134 specifications 550mm notching saw Double blade notching saw Used Elumatec machinery Aluminium construction saw

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, USED Taiwan Takisawa model EX-108 high performance 2-Axis CNC lathe. Serial Number CA11E80453 Year 2000. NOTE THIS IS A 2 AXIS MODEL EX108 NOT A 3 AXIS EX308. • Heavy Cast Iron Slant Bed Construction • Fanuc 21iT CNC Control • 4-Track Heavy Duty Linear Guideways • High Speed Servo Turret • Tool Setting Device • 8” 3-Jaw Hollow Spindle Hydraulic Chuck • Parts Counter • Toolholders included Max. Swing Over Bed - 400 MM Max. Swing Over Cross Slide - 320 MM Djdpfouwc T Hox Abbscr Distance Between Centres - 645 MM Standard Turning Diameter - 216 MM Max. Turning Diameter - 320 MM Max. Turning Length - 530 MM Bar Capacity - 52 MM X-Axis Stroke - 180 MM Z-Axis Stroke - 530 MM Spindle Speeds - 60 – 4000 RPM Spindle Nose - A2 – 6 Spindle Bore - 63 MM Turret Type - 12 Station Tailstock Stroke - 435 MM Tailstock Quill Stroke - 100 MM Tailstock Quill Taper - 5 MT Rapid Traverse (X & Z) - 20 & 24 M/Min Jog Feed Rate (X & Z) - 0 – 1260 MM/Min Spindle Motor - 7.5 / 11 KW Electrics - 415V,3PH,50HZ Floor Space - 2240 MM X 1645MM Machine Weight - 4300 KGS

Condition: excellent (used), Year of construction: 2017, Ref: 11039 . 2017 Rollem 36” Jetslit + 30” Rollaway and Cassette AutoCollator Delivery High volume print finishing system to maximizes finishing productivity for large volume producers For greeting cards, photo books, direct mail, postcards, invoices, business cards, game cards and much more. Features: This flexible system takes full press sheets and converts them to finished products in one step, eliminating the need for guillotine cutting, excess manpower and paper movement. 100% accuracy of finished products is a key feature of the Jetslit. Performs multiple print finishing steps with one system Bi-directional slitting, cutting, creasing and perforating in one machine Ideal for high volume production Multiple-up layouts maximize press sheet Decreases excess labour costs Dcodoxyxttepfx Abbsr Eliminates touch points and paper movement Fully integrates with press via DFA communication system Accepts sheets in-line from press or operates in a stand-alone near-line configuration Process: The system takes full printed sheets with multiple images and converts each sheet in two directions, as shown below: 1. Full sheets are fed into the JetSlit registration guide for perfect alignment. 2. The sheets are completely slit on the extreme edges and timed slit in-between with Rollem's patented strike-slit feature. 3. The sheets are turned 90 degrees and re-registered. 4. Final slits are made, removing the notched portions and leaving the final pieces. Specification: Speed: Up to 6,000 cut product sheets per hour Format: Up to 36’’ (915mm)

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, feed rate X-axis: 14 m/min, workpiece height (max.): 55 mm, controller model: TS 200 Touchscreen, TECHNICAL DETAILS Panel height: 55 mm Solid wood: 8 mm PVC/ABS thickness: 0.4–3 mm Feed speed: 14 m/min MACHINE DETAILS Control: TS 200 touchscreen EQUIPMENT Guide rail for panel insertion Side roller conveyor with idler wheels Roller holder plate Glue unit for EVA hot-melt adhesive with glue pot Edge pressure group for straight profiles with adjustable pressure rollers End cutting unit with 2 motors and tilt adjustment Fine trimming/trimming unit with 2 tilting motors Corner rounding unit with 2 multifunctional motors (Gleaner + Rounder) Edge scraper group Glue scraper group Brush unit Dcjdpfxoxxy Hfo Abbjr Adjustable working height

Condition: good (used), Year of construction: 2017, V304 plate processing machine (including 1 gantry beam(s) of 6.500mm and side trucks) ◼ This V304 plate processing machine is capable of processing plates up to 3.050mm x 18.000mm for bevel plasma cutting and marking (needle marker, if attached) and 4.100 x 18.000 mm for oxy-fuel cutting and marking (needle marker, if attached) ◼ X-rail (21.000mm on both sides of the machine, including double linear guides, helical rack and pinion system and rubber covering band) ◼ Plasma cutting and extraction table (4.300mm x 18.720mm, 2 channel(s), 1 pcs, suitable for ≥ 350A cutting) ◼ Position 1: Plasma cutting unit Kjellberg SmartFocus400 (1 pcs, automatic gas console, complete with cutting parameter database) ◼ Plasma 3D bevel unit (1 pcs, including 5 NC-axis, Voortman height control, intelligent torch positioning system and 3D collision sensor, for x- ,y- , k- and v-weld preparations) ◼ Driven suspension (1 pcs, servo motor driven, including laser pointer) ◼ Dross inhibitor (1 pcs, including 1,2L reservoir) ◼ Arc Glare protection (1 pcs) ◼ Position 2: Plasma cutting unit Kjellberg SmartFocus400 (1 pcs, automatic gas console, complete with cutting parameter database) ◼ Plasma 3D bevel unit (1 pcs, including 5 NC-axis, Voortman height control, intelligent torch positioning system and 3D collision sensor, for x- ,y- , k- and v-weld preparations) ◼ Dragged suspension (1 pcs, with automatic addressing) ◼ Dross inhibitor (1 pcs, including 1,2L reservoir) ◼ Arc Glare protection (1 pcs) ◼ Position 3: Oxy-fuel cutting torch 4.0 (1 pcs, automatic gas console, ignition and piercing, complete with cutting Dcodpfx Abovpalaobsr parameter database) ◼ Voortman height control (1 pcs, capacitive height control) ◼ Dragged suspension (1 pcs, with automatic addressing) ◼ Position 4: Oxy-fuel cutting torch 4.0 (1 pcs, automatic gas console, ignition and piercing, complete with cutting parameter database) ◼ Voortman height control (1 pcs, capacitive height control) ◼ Dragged suspension (1 pcs, with automatic addressing) ◼ Position 5: Oxy-fuel cutting torch 4.0 (1 pcs, automatic gas console, ignition and piercing, complete with cutting parameter database) ◼ Voortman height control (1 pcs, capacitive height control) ◼ Dragged suspension (1 pcs, with automatic addressing) ◼ Cables high instead of low ◼ Donaldson fume extraction unit DFO 4-48 - 200L (incl. frequency controller) ◼ Air conditioning for switch panel (up to an ambient air temperature of 55°C) ◼ Hardware and software (includes VACAM ‘Machine Edition’, VACAM ‘Office Edition’, VACAD editor software module, VANEST nesting software, Layout marking software module, online support) ◼ Post processor for SigmaNEST (SigmaNEST is provided by the customer) ◼ Safety devices (safety bumpers, emergency stop cord)

Condition: used, Year of construction: 2018, Striebig Compact Wall Saw – 2018 Model – Excellent Condition Dcsdpfx Asx Dh T Dobbor A rare opportunity to purchase a Striebig Compact Wall Saw, built in 2018 and meticulously maintained. Known for Swiss precision and robust build quality, this machine is perfect for accurate vertical and horizontal panel cutting in tight workshop spaces. Key Details: Make/Model: Striebig Compact Year: 2018 Condition: Excellent – clean, reliable, and serviced Cutting Capacity: Ideal for full-sized sheet materials (MDF, plywood, laminates, etc.) Usage: Light-to-moderate – not heavily used Location: N18 Availability: Ready for collection from North London Features: Smooth, accurate vertical and horizontal cuts Space-saving design – ideal for smaller workshops Heavy-duty frame and guide rails Dust extraction port compatible Striebig is the gold standard in vertical panel saws, offering durability, safety, and unmatched precision.

Year of construction: 2023, operating hours: 154 h, condition: ready for operation (used), General Data Measurements width 1690 mm Measurements depth 2785 mm Measurements height 1725 mm Machine weight 4650 kg Control Unit Brand MAZATROL Model SMOOTH Ez Main Drive Number of axis 3 Movement X-Axis Movement 215 mm X-Axis Rapid Traverse 30 m/min Y-Axis Movement 100 mm Y-Axis Rapid Traverse 10 m/min Z-Axis Movement 605 mm Z-Axis Rapid Traverse 30 m/min Media Air pressure 0.5 to 1.0 MPa Additional Equipment Transformer for Europe (CE) Roller guide with spherical roller bearings SD memory card I/F + USB memory I/F 1 Set of control keys Foundation kit (steel plates) CE Marking (With noise filter) C-axis Positioning 0.0001° Increment 12-Position Turret Y-Axis Control Interface bar feeder This 3-axis Mazak QTE-200MY SG was manufactured in 2023. It features a maximum swing diameter of 695 mm, a standard cutting diameter of 235 mm, and a maximum turning diameter of 340 mm. The main spindle operates at speeds up to 5,000 min-1, with a motor power of 15.0 kW. It includes a 12-position turret and rapid traverse rates on the X, Y, Z and C axes are 30, 10, and 30 m/min respectively. Contact us for more information about this machine. Application Types Turning Dcodpfxox D R Svo Abbor

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, USED Taiwan Takisawa model EX-108 high performance 2-Axis CNC lathe. Serial Number CA11E80453 Year 2000. NOTE THIS IS A 2 AXIS MODEL EX108 NOT A 3 AXIS EX308. • Heavy Cast Iron Slant Bed Construction • Fanuc 21iT CNC Control • 4-Track Heavy Duty Linear Guideways • High Speed Servo Turret • Tool Setting Device • 8” 3-Jaw Hollow Spindle Hydraulic Chuck • Parts Counter • Toolholders included Max. Swing Over Bed - 400 MM Max. Swing Over Cross Slide - 320 MM Distance Between Centres - 645 MM Standard Turning Diameter - 216 MM Max. Turning Diameter - 320 MM Max. Turning Length - 530 MM Bar Capacity - 52 MM X-Axis Stroke - 180 MM Z-Axis Stroke - 530 MM Spindle Speeds - 60 – 4000 RPM Spindle Nose - A2 – 6 Spindle Bore - 63 MM Turret Type - 12 Station Tailstock Stroke - 435 MM Tailstock Quill Stroke - 100 MM Tailstock Quill Taper - 5 MT Rapid Traverse (X & Z) - 20 & 24 M/Min Djdpet E Hvgofx Abbscr Jog Feed Rate (X & Z) - 0 – 1260 MM/Min Spindle Motor - 7.5 / 11 KW Electrics - 415V,3PH,50HZ Floor Space - 2240 MM X 1645MM Machine Weight - 4300 KGS

Condition: excellent (used), Year of construction: 2017, Ref: 11038 . 2017 Rollem 36” Jetslit + 30” Rollaway and Cassette Delivery High volume print finishing system to maximizes finishing productivity for large volume producers For greeting cards, photo books, direct mail, postcards, invoices, business cards, game cards and much more. Features: This flexible system takes full press sheets and converts them to finished products in one step, eliminating the need for guillotine cutting, excess manpower and paper movement. 100% accuracy of finished products is a key feature of the Jetslit. Performs multiple print finishing steps with one system Dodpfx Aboxyxr Njbscr Bi-directional slitting, cutting, creasing and perforating in one machine Ideal for high volume production Multiple-up layouts maximize press sheet Decreases excess labour costs Eliminates touch points and paper movement Fully integrates with press via DFA communication system Accepts sheets in-line from press or operates in a stand-alone near-line configuration Process: The system takes full printed sheets with multiple images and converts each sheet in two directions, as shown below: 1. Full sheets are fed into the JetSlit registration guide for perfect alignment. 2. The sheets are completely slit on the extreme edges and timed slit in-between with Rollem's patented strike-slit feature. 3. The sheets are turned 90 degrees and re-registered. 4. Final slits are made, removing the notched portions and leaving the final pieces. Specification: Speed: Up to 6,000 cut product sheets per hour Format: Up to 36’’ (915mm)

Condition: used, Year of construction: 2015, A very high quality German designed and built spindle moulder from leading manufacturer Martin. The machine although compact in design has a number of premium features as standard including the heavy composite frame to ensure maximum stability along with the 5.7" TFT colour touch screen control unit. This is positioned economically at eye level and helps reduce set up times markedly. From this unit the operator can easily set the required height of the spindLE. In addition the tool data memory gives the facility to store up to 500 different tools, automatically recalling the spindle height position, speed and other program data for the particular tool selected. Other standard features include a precision fence assembly, with hand wheel adjustment and digital display in the control unit, electronic soft braking device for the spindle motor and 'Dornfix' quick shaft change system Specification Dcodpfsxx Upnex Abbjr - Heavy duty basement for maximum stability and precise machining. - Precision ground cast iron table. - Overhead user friendly graphic colour touch screen control unit. - Heavy duty fence assembly with precision movement - movement by hand wheel - 1 off 11/4" dia spindle shaft (140mm working length) - SK40 'Dornfix' quick change system. - 7.5hp motor - 3000,4500,6000,8000 and 10,000 spindle rpm. - Centralised lubrication. Complete with following options: - Table extensions to both sides giving overall length of 2200mm with extendable workpiece support bar 3000mm overall length. - Integral fence plates - Digital display of fence plate right on control screen with adjustment by handwheel (instead of just normal scale rule). - Cast iron console for feed support - Comfort feed support arm with quick rise / fall by handwheel with mechanical display of height position. Heavy duty cast iron brackets and large steel clamping levers to ensure feed unit is securely locked in required position. - Feed unit variomatic 3 roller with variable mechanical feed speeds of 3 to 17m/min. On / off buttons for the feed unit integrated in to the control panel. - Centrex cutter guard in Lieu of standard CPS guard.

Condition: used, Year of construction: 2005, functionality: fully functional, USED Takisawa Taiwan model EX-308 3-Axis slant bed universal CNC lathe with Fanuc 21i-T control. Year 2005 CF03E30096 Heavy Cast Iron Construction High Performance 4 Track Linear Guideways Fanuc 21iT CNC Control 12 Station Heavy Duty, High Speed Servo Turret with Driven Tools Built in Oil Cooled Spindle Motor with Full C-Axis Dodjuwn Dkepfx Abbjcr Programmable Tailstock Quill 8” 3-Jaw Hollow Spindle Hydraulic Chuck Tooling Package including two driven tool holders Swing Over Bed - 450 mm Distance Between Centres - 645 mm Max. Turning Diameter - 260 mm Max. Turning Length - 530 mm Bar Capacity - 52 mm X Axis Stroke - 180 mm Z Axis Stroke - 530 mm Spindle Speeds - 30 To 4000 RPM Number Of Turret Stations - 12 Number Of Driven Stations - 12 Driven Tool Speeds - 40 To 4000 Rpm Driven Tool Motor - 1.1/3.7 kW Tailstock Travel - 435 mm Tailstock Quill Travel - 100 mm Rapid Traverse Rates (X/Z) - 20/24 M/Min Main Spindle Motor - 11/18 kW Floor Space - 2360 X 1745 mm Machine Weight - 4300 Kgs Electrics - 415 V, 3 Ph, 50 Hz

Condition: excellent (used), Year of construction: 2012, Ref:11025 . 2012 Kolbus DA-270 Casemaker For high-speed production of hard book covers, Lever Arch files and games boards. Comprising: ‘Co-pilot’ system with touch screen for automatic size setting, menu guided make-ready and fault indication. Twin board magazine feeders - manual loading Central soft spine feeder with double reel holder for auto-splice and cutter for waste Magazine feeder of pre-cut cloth with miss control Mobile hot-melt gluing unit Heated glue application roller with scraper roller Cloth cylinder with grippers & exchangeable plates for rubber pad Counter shingle delivery with roller conveyor External glue application adjustment Glue viscosity device for automatic water supply control Pressing roller for crease-free cover to board application Single case request for operator set-up Variable DC drive Automatic lubrication Including accessories & manuals. N.B. Compressed air and water supplies to client’s account. Accessories: 2017 Kolbus ECK 100 Corner cutter Dcsdpjxx Uyyefx Abbor Specification: Size of opened case, Max: 670 x 390 mm Min : 205 x 140 mm Centre strip width : 6 - 90 mm, thickness 1 – 4 mm Joint width : 4 - 15 mm Turn-in width, closed : 8 – 15 mm Output, variable : up to 65 cycles/min Floor space : L: 6700 x W: 3000 x H: 2,200 mm Electrical loading : 15 kW (3ph, 400V, 50 Hz) Air requirement : 33 Nm3/h 6 bar.

Condition: used, Year of construction: 2005, functionality: fully functional, USED Takisawa Taiwan model EX-308 3-Axis slant bed universal CNC lathe with Fanuc 21i-T control. Serial number CF02E30091 Year 2005 Heavy Cast Iron Construction High Performance 4 Track Linear Guideways Fanuc 21iT CNC Control 12 Station Heavy Duty, High Speed Servo Turret with Driven Tools Built in Oil Cooled Spindle Motor with Full C-Axis Programmable Tailstock Quill 8” 3-Jaw Hollow Spindle Hydraulic Chuck Tooling Package including two driven tool holders Swing Over Bed - 450 MM Distance Between Centres - 645 MM Max. Turning Diameter - 260 MM Max. Turning Length - 530 MM Bar Capacity - 52 MM X Axis Stroke - 180 MM Dcsdpet Dzz Isfx Abbsr Z Axis Stroke - 530 MM Spindle Speeds - 30 To 4000 RPM Number Of Turret Stations - 12 Number Of Driven Stations - 12 Driven Tool Speeds - 40 To 4000 RPM Driven Tool Motor - 1.1/3.7 KW Tailstock Travel - 435 MM Tailstock Quill Travel - 100 MM Rapid Traverse Rates (X/Z) - 20/24 M/Min Main Spindle Motor - 11/18 KW Floor Space - 2360 X 1745 MM Machine Weight - 4300 KGS

Condition: excellent (used), Year of construction: 2009, Ref:10891 . 2009 ODM ‘Sticker’ Casing-in Machine + ‘Smasher’ Press. For casing-in & pressing a variety of thin to thick books into flexible or hard cases. ODM ‘Sticker’ Features:- • Easy to use control panel. • Very short set-up and strip down times. • Self-adjusting machine requires no make-ready for different case sizes. • Integral twin glue tanks, easily removed for quick cleaning. • Vacuum cover guide for accurate placement of the spine*. Hand feed of book block Vertical wing action Twin PVA cold glue tanks/application rollers Manual feed of case* ODM ‘Smasher’ Dcedou Tky Repfx Abber Self-adjusting hydraulic pressing & building-in machine. Features:- • Easy to use control panel. • Foot pedal operated pre-set to locate the joint area of the book. • Dual hand button operation for operator safety. • 10 tons of pressure for highly compressed books. • Adjustable dwell timing for pressure duration and heating forming. • Thermostatic control of heated joint forming irons. Specification: Sizes, Max: 280 x 355 mm Min: 100 x 100 mm Book thickness : 1 - 100 mm Mechanical speed, Max: 100 - 400 books/hr. (series production) Max: 100 - 200 books/hr. (one-off production)

Condition: used, Year of construction: 2005, functionality: fully functional, USED Takisawa Taiwan model EX-308 3-Axis slant bed universal CNC lathe with Fanuc 21i-T control. Serial number CF02E30091 Year 2005 Heavy Cast Iron Construction High Performance 4 Track Linear Guideways Fanuc 21iT CNC Control 12 Station Heavy Duty, High Speed Servo Turret with Driven Tools Djdpfxouwdg Uj Abbocr Built in Oil Cooled Spindle Motor with Full C-Axis Programmable Tailstock Quill 8” 3-Jaw Hollow Spindle Hydraulic Chuck Tooling Package including two driven tool holders Swing Over Bed - 450 MM Distance Between Centres - 645 MM Max. Turning Diameter - 260 MM Max. Turning Length - 530 MM Bar Capacity - 52 MM X Axis Stroke - 180 MM Z Axis Stroke - 530 MM Spindle Speeds - 30 To 4000 RPM Number Of Turret Stations - 12 Number Of Driven Stations - 12 Driven Tool Speeds - 40 To 4000 RPM Driven Tool Motor - 1.1/3.7 KW Tailstock Travel - 435 MM Tailstock Quill Travel - 100 MM Rapid Traverse Rates (X/Z) - 20/24 M/Min Main Spindle Motor - 11/18 KW Floor Space - 2360 X 1745 MM Machine Weight - 4300 KGS

Condition: used, Year of construction: 2005, functionality: fully functional, USED Takisawa Taiwan model EX-308 3-Axis slant bed universal CNC lathe with Fanuc 21i-T control. Year 2005 CF03E30096 Heavy Cast Iron Construction High Performance 4 Track Linear Guideways Fanuc 21iT CNC Control 12 Station Heavy Duty, High Speed Servo Turret with Driven Tools Built in Oil Cooled Spindle Motor with Full C-Axis Programmable Tailstock Quill 8” 3-Jaw Hollow Spindle Hydraulic Chuck Tooling Package including two driven tool holders Swing Over Bed - 450 mm Distance Between Centres - 645 mm Max. Turning Diameter - 260 mm Max. Turning Length - 530 mm Bar Capacity - 52 mm X Axis Stroke - 180 mm Z Axis Stroke - 530 mm Spindle Speeds - 30 To 4000 RPM Number Of Turret Stations - 12 Dcjdot N Sitopfx Abbsr Number Of Driven Stations - 12 Driven Tool Speeds - 40 To 4000 Rpm Driven Tool Motor - 1.1/3.7 kW Tailstock Travel - 435 mm Tailstock Quill Travel - 100 mm Rapid Traverse Rates (X/Z) - 20/24 M/Min Main Spindle Motor - 11/18 kW Floor Space - 2360 X 1745 mm Machine Weight - 4300 Kgs Electrics - 415 V, 3 Ph, 50 Hz