Used Guide Fence for sale (5,436)

Condition: used, tank capacity: 1,100 l, Location: Bremen Condition: Used Volume: 1,100 litres Design: Suspended Heating/Cooling: Available Cylinder temperature control: Double jacket Heating/Cooling jacket Bottom temperature control: Double jacket Internal diameter: 1,040 mm External diameter: 1,090 mm Cylindrical height: 1,200 mm Total height: 3,200 mm Equipment Manhole/Dome: In top head (DN 400) Outlet: Flange DN40 Note: Manhole cover plated Remarks: Former mounting lugs were cut off during dismantling and are no longer available; one heating connection cut off; tank with heavy residue build-up Previous use: Adhesive production Product-contact material: V4A 1.4429 (AISI316) Double jacket material: V2A 1.4301 (AISI304) Agitator Agitator manufacturer: Stelzer Power: 2.2 kW Speed: 274 rpm Lsdpjxqbi Eofx Aaceah Agitator type: inclined-blade agitator Shaft seal: Mechanical seal with thermosiphon vessel Agitator Voltage: 230/400 Volt Explosion-proof: Motor is Ex-proof (compliance with applicable ATEX guidelines under local conditions must be verified) Agitator Agitator mounting: Eccentric in top head Agitator features: Agitator blades partially bent (see photos)

Condition: used, -Dimensions LxWxH: 750x1520x1430mm -Year: 2006 -Serial number: 1992 -Feed height from floor: 830 mm -Sealing frame - Longitudinal arm: 390 mm -Sealing frame - Cross arm: 490 mm -Noise level: 60 dB -Standby ECO power consumption: 0.3 kW/h -Power consumption for 150 packs/hour: 1.5 kW/h -Maximum product height for consumables: 180 mm -Maximum product weight for consumables: 10 kg -Maximum reel diameter for consumables: 260 mm -Maximum reel width for consumables: 550 mm -Usable films for consumables: PVC, Polyolefin -Voltage: 230 V ADVANTAGES -2 possible working modes as standard -Forward/Backward or Stepless Variable Speed -Armored heating elements -Arranged in a circle around the fan for uniform shrinkage -Strong and balanced ventilation -Ensures efficient heat transfer to the film, resulting in all films shrinking at a lower temperature with shorter exposure time Simultaneous adjustment Lodjxqfy Ujpfx Aaceah -Simultaneous height adjustment of the discharge table and tunnel conveyor according to the bundle size: no height difference, better shrinking, and energy savings Silent -Latest generation timed electric motor with low noise emission EQUIPMENT -Bundle placed on a fixed transfer plate -2 electromagnets hold the frame down during the sealing operation -At the end of sealing, the operator pushes the PACK onto the tunnel belt, which moves at a continuous (variable speed) pace -The PACK travels through the tunnel to the exit -Features designed for operator comfort and workstation ergonomics -Adjustable film support depth and feed table -2 working modes available as standard: FORWARD/BACKWARD or CONTINUOUS with VARIABLE SPEED -Height adjustment for the tunnel belt/conveyor -Waste film collection tray -Mobile unit on casters -Sealing device with permanent heat + impulse with adjustment -Electronic thermostat controlling tunnel temperature +/- 2°C -Timed tunnel heating and ventilation -Teflon-coated mesh conveyor belt with guide, 5x5 mm mesh, adjustable speed via frequency inverter -Belt conveyor height adjustable with handwheel for optimal shrinkage (no height difference)

Condition: used, Year of construction: 2003, 700mm steering wheels Lsdpexpdqcefx Aacoah Parallel guide Engine brake 4kw motor Star triangle start 380V

Condition: used, Year of construction: 2001, - Main motor power [kW]: 7.5 - Table length [mm]: 2500 - Table width [mm]: 500 - Max. tool diameter milling head [mm]: 160 - Max. tool diameter pen cover [mm]: 160 - Tiltable spindle: Automatic - Spindle height adjustment: Automatic - Motor braked: Yes - Feeding device present: Yes - Brand: Mec4v - Type: Mec4v - Number of wheels [pcs]: 3 - Number of speeds: 2 - Guide present: Yes - Brand: Aigner - Options: Tenoning hood - Spindle speed: Manual - Min. spindle speed [rpm]: 3000 - Max. spindle speed [rpm]: 10000 - Spindle speed control: Incremental - Year: 2001 - Documentation available: No Lasdewwa Hrepfx Aacjh - CE marking present: Yes - Serial number: 8756 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), hole punhing press: pressure 100 t output 40 in 22 mm L-beam 160 x 16.0 mm square edge steel 50.0 mm round bar steel 50.0 mm flat steel 600 x 15.0 / 400 x 20.0 mm throat 610 mm engine output 8.5 kW weight of the machine ca. 3150 kg range L-W-H ca. 2200 x 1400 x 1830 mm Equipment: - Robust electro-hydraulic profile steel shear - Punching station with punch quick-change device and die holder Laodpfxoxn Tydo Aacoh - Includes large support table with movable stop - Continuous stroke adjustment with jog/setup mode - Triangular notching station with support table - Bar, profile, and angle steel shear - Flat steel station with support and guide table - Various punches and dies (drawer cabinet) - 1x electric contact length stop - 2x freely movable foot switches - Operating instructions (PDF)

Condition: excellent (used), Year of construction: 1994, Holz Her Tilting Spindle Moulder with Holz Her Power Feeder Table extension on both sides with pull-out stop Swiveling spindle: Yes, -5 to +45° Height adjustment: manual Tilting adjustment: electric Fence adjustment: manual Height display: digital Tilting angle display: digital Laedpfx Aoxpm Evjacsh Fence position display: scale Spindle diameter: 30 mm Speeds: 1500, 3000, 4500, 6000, 9000, 12000 rpm Motor power: 5 / 6 kW Motor brake: Yes, automatic Extraction connection: 2 x 120 mm Machine length: 1950 mm Machine depth: 1400 mm Weight: approx. 1100 kg Holz Her Power Feeder, type 1112 – 4 rollers Location: Ex stock 54634 Bitburg - Immediately available -

Condition: used, tank capacity: 586 l, Location: Bremen Condition: used Volume: 586 liters Vacuum: 1.0 bar Maximum overpressure: 2.75 bar Tank Maximum operating temperature vessel / °C: 204°C Heads: torispherical heads Design: upright Tank Support design: mobile on castors Number of feet: 4 pcs Heating/cooling: fitted Double jacket volume: 136.0 liters Max. permissible operating overpressure: 6.5 bar Heating/cooling jacket Max. permissible operating vacuum, double jacket / pipe space / bar: 1.0 bar Max. permissible operating temperature: 204°C Cylinder temperature control: double jacket Heating/cooling jacket Bottom temperature control: double jacket Insulation: fitted Insulation Insulation shell: welded Insulation material: mineral wool Lasdjxqbcxjpfx Aaceh Insulation shell material: stainless steel Insulation thickness / mm: 50 mm Internal diameter: 813 mm Total height: 2,093 mm Technical data / dimensions Wall thickness, heads: 9.5 mm Wall thickness, cylinder: 10 mm Technical documentation: drawing Equipment Manhole / dome: on top head Nameplate: Remarks: Manufactured according to ASME guidelines. Last use: pharmaceuticals Material properties Material, heads: steel Material, cylinder: steel Product-contact material: enamel

Year of construction: 1985, condition: used, Drilling capacity in ST 60 20mm Tapping capacity M16 Milling capacity in ST 60 up to 20 cm³/min Milling capacity in AL up to 80 cm³/min. Tool holder SK30 Spindle motor - direct current 5.7 kW Speed range/max. torque i 1:1 20 to 6000 rpm with 40 NM Step change 1.12 Spindle bearing diameter 50mm Tool clamping mechanical Pull-in force 3000 N feed of the Z-axis 200mm rapid traverse speed of the Z-axis 15m/min feed force of the Z-axis 6000 N feed path of the X- and Y-axis 500 x 250mm clamping surface 630 x 400 mm rapid traverse rate of the X- and Y- axis 15 m / min feed force of the X- and Y- axis 6000 N Ljdpfx Aaob Hf I Tscsah Programmable feed rate in all three axes 1 to 4000 mm/min Projection spindle to guide 300 mm Distance spindle support to table surface 190 to 390 mm (stroke 200mm) and 190 to 615 mm (stroke 400mm) Number of magazine positions (tools) 12 Tool shank steep taper shank 30 max. tool diameter at full occupancy 63mm max. tool diameter with free secondary places 100mm max. permissible tool weight 5 kg tool change time approx. 1 sec. Cut to cut time approx. 3.2 sec. Total connected load approx. 15 kW (but only needs approx. 5~10 kW in operation) Machine weight approx. 3,5 to. Requires commercial compressed air connection

Condition: used, Year of construction: 2001, total width: 800 mm, total length: 3,300 mm, total height: 3,200 mm, Empty weight: 1.000 kg Trabo WSB33 Net locking dimensions: 2700*2700mm 6 hydraulic supports in two groups Mobile ladder with guide rail mounted on the bench Dimensions module 980x980 mm Installation angle 70-81° or horizontal Diameter holes 25 mm Pitch of the holes 122.5 mm Height stop strip 130 mm - Main motor power [kW]: 1.1 Lodpjwnhldjfx Aaceah - Max. clamping width [mm]: 2700 - Max. clamping depth [mm]: 2690 - Options: Remote control - Year: 2001 - Documentation available: Yes - CE marking present: Yes - Serial number: 33009012 - Transport dimensions: 3300mm x 800mm x 3200mm (l x w x h) - Transport weight [kg]: 1000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: new, pressure 200 t stroke 300 mm table surface area 1900 x 440 mm column travel between the guideways 1900 mm working feed 5,0 mm/sec engine output 15,0 kW Lasdoxabw Ijpfx Aacjh weight of the machine ca. 4.800 kg. range L-W-H 2.570 x 1.665 x 2.860 mm Furnishing: - Robust electro-hydraulic workshop press, with adjustable cylinder - Ideal for aligning axles, shafts, etc., but also for pressing in and out of bolts, bearings, bushings and much more. - Robust welded steel construction for high demands - Table height adjustment via piston rod * including round steel chain and 2x locking bolts * Piston rod with metric socket - 1x set of V-block prism supports - Manometer for pressure display - simply constructed hand control with: * 1x delivery speed * 1x working speed * 1x retreat speed - Piston can be stopped in any position - Hydraulic tank mounted on the side - Operation manual

Condition: used, tank capacity: 2,750 l, Location: Bremen Condition: used Volume: 2,750 liters Vacuum: 1.0 bar Max. Overpressure: 3.2 bar Tank: Laodpfx Aoxqa R Ieaceh Max. Operating Temperature Tank / °C: 200 °C Design: suspended Tank Support Type: ring Heating/Cooling: available Double Jacket Volume: 62.0 liters Max. permissible operating overpressure: 16.0 bar Max. permissible operating temperature: 200 °C Cylinder temperature control: half-pipe coil Heating/Cooling Jacket Bottom temperature control: half-pipe coil Internal diameter: 1,390 mm Cylindrical height: 1,380 mm Overall height: 3,150 mm Features: Manhole / Dome: in top head (DN 500) Nameplate: available Outlet: flange DN100 Note: Manhole cover plated Remarks: Support ring Fe; manhole davit bent Previous application: pharmaceutical chemicals Product contact material: V4A 1.4435 (AISI316) Material properties Temperature control system material: V2A 1.4541 (AISI304) Power: 2.6 kW Speed: 323 rpm Agitator: propeller type Agitator Voltage: 220/380 volts Explosion protection: Motor is explosion-proof (compliance with applicable ATEX guidelines under local conditions must be verified) Agitator Agitator positioning: eccentric on top head

Year of construction: 1985, condition: used, Technical manuals and tool holders available; further technical data: Drilling capacity in ST 60 20mm Threading capacity M16 milling capacity in ST 60 up to 20 cm³/min Milling capacity in AL up to 80 cm³/min. Tool holder SK30 Spindle motor - direct current 5,7 kW Speed range/max. torque i 1:1 20 to 6000 rpm with 40 NM step jump 1,12 spindle bearing diameter 50mm Tool clamping mechanical Pull-in force 3000 N feed of the Z-axis 200mm rapid traverse speed of the Z-axis 15m/min feed force of the Z-axis 6000 N feed path of the X- and Y-axis 500 x 250mm clamping surface 630 x 400 mm Laedpebwn Rhsfx Aacoh rapid traverse rate of the X- and Y-axis 15 m / min Feed force of the X- and Y- axis 6000 N Programmable feed in all three axes 1 to 4000 mm/min Spindle overhang to guide 300 mm Distance between spindle and table surface 190 to 390 mm (stroke 200mm) and 190 to 615 mm (stroke 400mm) Number of magazine positions (tools) 12 Tool shank steep taper shank 30 max. tool diameter with full occupancy 63mm max. tool diameter with free secondary places 100mm max. permissible tool weight 5 kg tool change time approx. 1 sec. cut to cut time approx. 3,2 sec. total connected load approx. 15 kW (but needs only approx. 5~10 kW in operation) Machine weight approx. 3,5 to. needs commercial compressed air connection distance measuring systems = glass measuring scales spindle conveyor with ejection height 850 mm; make: KNOLL type: 240 S-1/150; incl. documents Shifting table for

Condition: used, Year of construction: 2001, total height: 2,200 mm, total width: 1,200 mm, total length: 2,680 mm, Empty weight: 950 kg Price: On request Table milling machine Hofmann TFS 1200 Serial no. 127-01204 Year of construction 2001 7.8kW, 16amp, 400V 45 degree tilt adjustable. Aigner guide Feeder - Main motor power [kW]: 7.8 - Spindle diameter [mm]: 40 - Table length [mm]: 2680 - Table width [mm]: 450 - Tiltable spindle: Automatic - Min. tiltability [°]: 0 - Max. tiltability [°]: 45 - Feeding device present: Yes - Brand: Masterwood Lsdswl I E Ejpfx Aacsah - Type: Euromeo - Number of wheels [pcs]: 4 - Number of speeds: 2 - Guide present: Yes - Brand: Aigner - Min. spindle speed [rpm]: 3000 - Spindle speed control: Incremental - Year: 2001 - Documentation available: No - Serial number: 127-01204 - Transport dimensions: 2680mm x 1200mm x 2200mm (l x w x h) - Transport weight [kg]: 950kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: new, pressure 150 t stroke 300 mm table surface area 1070 x 290 mm column travel between the guideways 1070 mm ajustment speed 9.0 mm/sec working feed 5.0 mm/sec return speed 10.0 mm/sec engine output 11.0 kW weight of the machine ca. 2070 kg. range L-W-H 2200 x 1200 x 2550 mm Display machine from 2023 With only approximately 2 operating hours Like new condition Special price upon request Furnishing: - Robust electro-hydraulic workshop press, with adjustable cylinder - Ideal for aligning axles, shafts, etc., but also for pressing in and out of bolts, bearings, bushings and much more. - Robust welded steel construction for high demands - Table height adjustment via piston rod * including round steel chain and 2x locking bolts * Piston rod with metric socket Ledpfsxabnasx Aacoah - 1x set of V-block prism supports - Manometer for pressure display - simply constructed hand control with: * 1x delivery speed * 1x working speed * 1x retreat speed - Piston can be stopped in any position - Hydraulic tank mounted on the side - Operation manual

Condition: used, tank capacity: 1,345 l, Location: Bremen Condition: used Volume: 1,345 liters Vacuum: 1.0 bar Max. overpressure: 3.2 bar Tank Max. operating temperature (tank): 200°C Ledpjxqa N Rsfx Aacoah Top: bolted lid Design: suspended Tank Support type: lug supports Heating/Cooling: available Double jacket volume: 24.0 liters Max. allowable operating pressure: 16.0 bar Max. allowable operating temperature: 200°C Cylinder temperature control: half-pipe coil Heating/Cooling jacket Bottom temperature control: half-pipe coil Insulation: available Insulation Insulation jacket material: aluminum Internal diameter: 1,000 mm External diameter: 1,250 mm Cylindrical height: 1,360 mm Total height: 2,950 mm Nameplate: Features Outlet: flange DN80 Note: light residues, pressure marks on insulation jacket Comments: 2 lugs made of V2A (contact surface inverted; see photos); some flanges made of Fe; heating connections cut off; small sheet cuts in insulation jacket Last application: pharmaceutical chemicals Product contact material: V4A 1.4401/04 (AISI316) Material characteristics Temperature control system material: V2A 1.4301 (AISI304) Power: 1.1 kW Speed: 313 rpm Agitator: propeller Agitator Voltage: 220/380 V Explosion protection: motor is explosion-proof (compliance with relevant ATEX guidelines under local conditions must be verified) Agitator Agitator arrangement: eccentric on upper end plate

Condition: as good as new (ex-display), Year of construction: 2024, pressure 100 t stroke 300 mm table surface area 1070 x 260 mm column travel between the guideways 1070 mm ajustment speed 8.0 mm/sec working feed 5.0 mm/sec return speed 10.0 mm/sec oil volume 90.0 l engine output 5.5 kW weight of the machine ca. 1500 kg. dimensions of the machine ca. 2050 x 1000 x 2200 mm Display machine from 2024 With only approximately 2 operating hours Like new condition Special price upon request Furnishing: - Robust electro-hydraulic workshop press, with fixed cylinder - Ideal for aligning axles, shafts, etc., but also for pressing in and out of bolts, bearings, bushings and much more. - Robust welded steel construction for high demands - Table height adjustment via piston rod * including round steel chain and 2x locking bolts * Piston rod with metric socket - 1x set of V-block prism supports - Manometer for pressure display - simply constructed hand control with: * 1x delivery speed Lasdpfx Aasxabcwjcsh * 1x working speed * 1x retreat speed - Piston can be stopped in any position - Hydraulic tank mounted on the side - Operation manual

Condition: used, tank capacity: 5,400 l, Location: Bremen Condition: used Volume: 5,400 liters Vacuum: 1.0 bar Maximum overpressure: 6.0 bar Tank Maximum operating temperature (tank): 200°C Design: suspended Tank support: ring base Heating/Cooling: available Cylinder temperature control: half-pipe coil Heating / cooling jacket Bottom temperature control: half-pipe coil Internal diameter: 1,800 mm Cylindrical height: 1,690 mm Total height: 3,700 mm Technical data / dimensions Bottom wall thickness: 8 mm Cylinder wall thickness: 6 mm Top wall thickness: 16 mm Technical documentation: drawing, inspection certificate Equipment Manway / access port: on top (DN 500) Nameplate: Equipment: crane lugs Outlet: flange DN100 Note: slight residues Remarks: Support ring made of carbon steel; half-pipe coil not shown in vessel drawing Last application: chemical industry Product-contact material: V4A 1.4571 (AISI316) Material properties Temperature control system material: V2A 1.4541 (AISI304) Agitator Agitator manufacturer: Ekato Power: 3.6 kW Speed: 450 rpm Agitator type: propeller Laodpfx Aasxqa Dnjcoh Seal: mechanical seal with thermosiphon vessel Voltage: 400/690 V Explosion protection: motor is Ex-protected (compliance with applicable ATEX guidelines under local conditions must be verified) Bottom bearing: Agitator arrangement: eccentric on top Agitator documentation: comprehensive documentation available

Condition: new, pressure 30.0 t stroke 200 mm table surface area 775 x 190 mm column travel between the guideways 775 mm ajustment speed 7.5 mm/sec working feed 5.0 mm/sec return speed 10.0 mm/sec engine output 3.0 kW weight of the machine ca. 400 kg. dimensions of the machine ca. 1.500 x 700 x 1.800 mm Features: - Robust electro-hydraulic workshop press with fixed cylinder Ljdpfx Aajxaayhocoah - Ideal for aligning axles, shafts, etc., . but also for pressing in and out bolts, bearings, bushings, and much more. - Robust welded steel construction for heavy-duty use - Table height adjustment via piston rod * Includes round steel chain and 2 locking pins * Piston rod with metric mount - 1 set of V-block prism supports - Pressure gauge for pressure display - Simple manual control with: * 1 feed speed * 1 working speed * 1 retraction speed - Piston can be stopped in any position - Fixed hydraulic tank mounted on the side - Operating instructions

Condition: used, tank capacity: 3,586 l, Location: Bremen Condition: used Volume: 3,586 liters Vacuum: 1.0 bar Max. overpressure: 3.2 bar Tank Max. operating temperature (tank): 200 °C Design: suspended Tank Base type: ring Heating/cooling: available Double jacket volume: 202.0 liters Max. permissible operating overpressure (double jacket): 16.0 bar Heating/cooling jacket Max. permissible operating vacuum (double jacket/tube side): 1.0 bar Max. permissible operating temperature: 200 °C Cylinder temperature control: half-pipe coil Heating/cooling jacket Bottom temperature control: half-pipe coil Internal diameter: 1,600 mm Cylindrical height: 1,377 mm Total height: 3,750 mm Technical data/dimensions Bottom wall thickness: 6.5 mm Cylinder wall thickness: 6 mm Technical data/dimensions Top wall thickness: 9.1 mm Technical documentation: drawing, various documents, acceptance certificate Equipment Manhole/dome: in top head (DN 500) Nameplate: Fittings: crane lugs Equipment Outlet (alternative entry): 130 mm Remarks: Sight glasses in manhole covers missing; support ring made of Fe; some flanges made of Fe Last application: pharmaceutical chemistry Product-contact material: V4A 1.4435 (AISI 316) Material properties Temperature control system material: AISI 304 (V2A) 1.4306 Agitator Agitator manufacturer: Ekato Power: 6.8 kW Speed: 30–184 rpm Agitator: blade agitator Agitator Voltage: 400/690 V Explosion protection: motor is Ex-protected (compliance with applicable ATEX guidelines under local conditions must be verified) Agitator Deflector: Agitator arrangement: centrally mounted in top head Lajdpfxsxqaxxe Aaceh Agitator features: technical documentation for agitator available; interprop blade agitator and inclined blade agitator installed on the shaft; output adjustable via handwheel

Condition: new, pressure 100 t stroke 300 mm table surface area 1070 x 315 mm column travel between the guideways 1070 mm ajustment speed 8.0 mm/sec working feed 5.0 mm/sec return speed 10.0 mm/sec oil volume 90.0 l engine output 5.5 kW weight of the machine ca. 1870 kg. dimensions of the machine ca. 2050 x 1000 x 2200 mm Furnishing: - Robust electro-hydraulic workshop press, with adjustable cylinder Laodpjxaar Dsfx Aacoh - Ideal for aligning axles, shafts, etc., but also for pressing in and out of bolts, bearings, bushings and much more. - Robust welded steel construction for high demands - Table height adjustment via piston rod * including round steel chain and 2x locking bolts * Piston rod with metric socket - 1x set of V-block prism supports - Manometer for pressure display - simply constructed hand control with: * 1x delivery speed * 1x working speed * 1x retreat speed - Piston can be stopped in any position - Hydraulic tank mounted on the side - Operation manual

Condition: used, Year of construction: 2016, tank capacity: 6,000 l, Location: Bremen Condition: used Volume: 6,000 liters Vacuum: 1.0 bar Max. positive pressure: 3.0 bar Tank Max. operating temperature, tank / °C: 135°C Design: vertical Tank Support type: feet Number of feet: 4 Heating/cooling: available Max. permissible operating overpressure: 6.0 bar Max. permissible operating temperature: 135°C Cylinder temperature control: Thermoplate Heating/cooling jacket Bottom temperature control: Thermoplate Insulation: available Insulation Insulation jacket: hermetically welded Insulation material: Armaflex Jacket material: stainless steel Insulation thickness / mm: 50 mm Ledpexqawnjfx Aacoah Internal diameter: 2,000 mm External diameter: 2,100 mm Cylindrical height: 1,400 mm Total height: 2,630 mm Technical data / Dimensions Bottom wall thickness: 6 mm Cylinder wall thickness: 6 mm Technical data / Dimensions Top wall thickness: 5.8 mm Year of manufacture: 2016 Technical documentation: drawings, TÜV papers, static calculations, CE marking and declaration of conformity, operating instructions Equipment Manhole / access port: in cylinder Nameplate: Equipment: crane lugs Equipment Outlet (alternative input): 187 mm Remarks: Manhole DN 600; outlet with bolted fitting; no indication of the double jacket’s acceptance in the inspection report (in a copy of drawing 1160246-1A or 1B there is a signed stamp 'Tested according to AD 2000 guidelines by TÜV Süd'); some blind plugs may be available Last application: pharmaceuticals Product-contact material: V4A 1.4401/04 (AISI316) Material properties Temperature control system material: V2A 1.4301 (AISI304) Feet material: stainless steel Agitator Agitator manufacturer: Metenova AB Speed: 495 rpm Agitator: magnetic stirrer Agitator Voltage: 400 volts Explosion protection: Motor is explosion-proof (compliance with relevant ATEX directives under local conditions must be verified) Agitator Agitator arrangement: bottom-mounted

Condition: new, pressure 60.0 t Ledpfx Aasxaakgscjah stroke 250 mm table surface area 1040 x 370 (315) mm column travel between the guideways 1040 mm ajustment speed 8.0 mm/sec working feed 4.0 mm/sec return speed 10.0 mm/sec engine output 4.0 kW weight of the machine ca. 800 kg. dimensions of the machine ca. 1.700 x 700 x 2.100 mm Features: - Robust electro-hydraulic workshop press with fixed cylinder - Ideal for aligning axles, shafts, etc., but also for pressing in and out bolts, bearings, bushings, and much more. - Robust welded steel construction for heavy-duty use - Table height adjustment via piston rod * Includes round steel chain and 2 locking pins * Piston rod with metric mount - 1 set of V-block prism supports - Pressure gauge for pressure display - Simple manual control with: * 1 feed speed * 1 working speed * 1 retraction speed - Piston can be stopped in any position - Fixed hydraulic tank mounted on the side - Operating instructions

Condition: used, Year of construction: 2021, tank capacity: 150 l, Location: Bremen Condition: unused Volume: 150 liters Vacuum: 1.0 bar Max. overpressure: 3.0 bar Tank Max. operating temperature tank / °C: 95 °C Top cover: top cover removable / can be opened Design: vertical Tank Stand type: mobile on castors Number of feet: 4 pieces Heating/cooling: available Double jacket volume: 11.0 liters Max. permissible operating overpressure: 6.0 bar Heating/cooling jacket Max. permissible operating vacuum double jacket / tube space / bar: 1.0 bar Lsdpfx Aexqakbeacjah Max. permissible operating temperature: 95 °C Cylinder temperature control: double jacket Heating/cooling jacket Bottom temperature control: double jacket Insulation: available Insulation Insulation jacket: hermetically welded Insulation jacket material: stainless steel Inner diameter: 490 mm Outer diameter: 550 mm Cylindrical height: 630 mm Total height: 1,750 mm Technical data / dimensions Bottom thickness: 4 mm Cylinder wall thickness: 5 mm Technical data / dimensions Top cover thickness: 6 mm Year of manufacture: 2021 Technical documents: drawing, various documents, inspection certificate, CE marking, and declaration of conformity Nameplate: Equipment: spray head, control cabinet (without guarantee) Equipment Outlet (alternative entry): 25 mm Remarks: Tank was only tested for validation purposes; technical documents have been ordered from the manufacturer but have not yet been received; plastic castors for the feet were removed for shipping but are included loose (see photos) Product contact material: V4A 1.4401/04 (AISI316) Material specification Temperature control system material: V2A 1.4301 (AISI304) Feet material: stainless steel Agitator Agitator manufacturer: Zeta GmbH Power: 0.09 kW Speed: 125 - 800 rpm Agitator: magnetic stirrer Agitator Voltage: 230/400 Volts Explosion-proof: Motor is explosion-proof (compliance with applicable ATEX guidelines under local conditions must be checked) Agitator Agitator arrangement: bottom mounted

Condition: as good as new (ex-display), Year of construction: 2021, pressure 150 t stroke 300 mm table surface area 1070 x 290 mm column travel between the guideways 1070 mm ajustment speed 9.0 mm/sec working feed 5.0 mm/sec return speed 10.0 mm/sec engine output 11.0 kW weight of the machine ca. 1870 kg. range L-W-H 2200 x 1300 x 2300 mm Exhibition machine from 2021 with only approximately 2 operating hours Condition as new Special price upon request Features: - Robust electro-hydraulic workshop press with fixed cylinder - Ideal for aligning axles, shafts, etc., but also for pressing in . and out bolts, bearings, bushings, and much more. - Robust welded steel construction for heavy-duty use - Table height adjustment via piston rod * Includes round steel chain and 2 locking pins * Piston rod with metric mount - 1 set of V-block prism supports - Pressure gauge for pressure display - Simple manual control with: * 1 feed speed Lasdpfoxaabfjx Aaceh * 1 working speed * 1 retraction speed - Piston can be stopped in any position - Hydraulic tank permanently mounted on the side - Operating instructions

Condition: new, pressure 80.0 t stroke 250 mm table surface area 1040 x 260 mm column travel between the guideways 1040 mm ajustment speed 8.0 mm/sec working feed 5.0 mm/sec return speed 10.0 mm/sec engine output 5.5 kW weight of the machine ca. 835 kg. dimensions of the machine ca. 1810 x 700 x 2100 mm Furnishing: - Robust electro-hydraulic workshop press, with fixed cylinder - Ideal for aligning axles, shafts, etc., but also for pressing in and out of bolts, bearings, bushings and much more. - Robust welded steel construction for high demands - Table height adjustment via piston rod * including round steel chain and 2x locking bolts * Piston rod with metric socket - 1x set of V-block prism supports - Manometer for pressure display - simply constructed hand control with: * 1x delivery speed Lajdpfxew U U Sve Aacsh * 1x working speed * 1x retreat speed - Piston can be stopped in any position - Hydraulic tank mounted on the side - Operation manual