Used Grease for sale (551)

Condition: reconditioned (used), Year of construction: 2015, operating hours: 30,143 h, functionality: fully functional, pressing force: 60 t, filling opening width: 1,100 mm, filling opening length: 1,500 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 570 kg, overall weight: 20,000 kg, oil tank capacity: 600 l, power: 37 kW (50.31 HP), year of last overhaul: 2025, volume flow: 800 m³/h, Technical data baler: Manufacturer Presona AB, Sweden Type LP 60 VH1 Ijdpfx Aaozdny Ro Ieth Year of construction 2015 Total operating hours, 30,143 hours, as of July 2025 Effective pump running time onl 6,527 hours, as of July 2025 Number of pressed bales 115,193 bales, as of July 2025 Press force pre press 25 t Main press force 60 tonnes Specific pressing force 73N/cm² Dimensions of feed chute 1,500 x 1,100 mm Filling volume / pressing cycle 2.7 m³ Theoretical throughput capacity 800 m³/hour Throughput capacity under operating conditions 350 m³/hour Bale dimensions 1,100 x 750 mm Drive power 37 kW Tying 5-fold vertical, fully automatic Throughput capacity with a Bulk weight of 50 kg/cbm 11 to 14 tonnes/hour Bale weights 420 to 570 kg, depending on material Hydraulic oil tank volume 600 litres Baler dimensions assembled with hopper 10,100 x 3,750 x 4,310 mm (l x w x h) Transport dimensions excluding press 10,100 x 2,400 x 3,000 mm (l x w x h) Machine weight press approx. 20 tonnes Condition of the press: The press was partially overhauled in our workshop and then tested in manual and automatic mode. The following overhaul work was carried out: Machine cleaned, partially derusted and partially repainted Hydraulic oil tank emptied and cleaned Oil filter and air filter replaced, new hydraulic oil filled Press ram dismantled and cleaned All four rollers removed from the press ram and replaced Grease cartridges of the automatic roller lubrication system replaced Slide rails cut out from the press floor in the press room Underbody reinforced with welded sheets New HARDOX slide rails welded in Wire station with deflection rollers for the lower wire cleaned and made operational Slide rails cut out from the floor in the press channel New HARDOX slide rails welded in Both side walls of the press channel dismantled, derusted Worn side wall plates cut out Complete side walls covered with new wear plates and welded Main hydraulic cylinder dismantled and disassembled for inspection Piston rod replaced, cylinder tube honed Complete seal set replaced, pressure test carried out Vertical needle system for binding dismantled, cleaned, wire deflection rollers made functional and serviced Chain cleaned, greased, chain tension readjusted Drillomat cleaned, wire knife, drill shafts and drill fingers checked, retightened with torque and serviced Machine checked, general maintenance work carried out and press tested in manual and automatic mode Comments: The press is sold without a conveyor belt and without wire stations. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: reconditioned (used), Year of construction: 2012, operating hours: 25,895 h, functionality: fully functional, pressing force: 78 t, filling opening width: 1,100 mm, filling opening length: 1,500 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 24,000 kg, oil tank capacity: 1,000 l, year of last overhaul: 2025, volume flow: 410 m³/h, Technical data baler: Manufacturer Presona AB Typ LP 80 VHK 1 Year of construction 2012 Total machine operating hours 25,895 hours, as of July 2025 Pump operating hours, effective 14,135 hours, as of July 2025 Number of bales pressed 235,597 pieces, as of July 2025 Press power main press 78,5 tons Specific press capacity 95 N/cm² Press power of pre-press 28 tons Volume of pressing chamber 2,7 m³ Feed channel1,500 x 1,100 mm Theoretic throughput rate 930 m³/h Throughput rate under operating conditions 410 m³/h Bale size 750 x 1,100 mm Driving motor 55 kW Tying system 5 fold vertical, 3-fold horizontal, full automatic Throughput rate with a bulk density of 30 kg/m³ approx. 9 to 12 tonnes/hour, depending on material 50 kg/m³ approx. 14 to 17 tonnes/hour, depending on material 100 kg/m³ approx. 16 to 25 tonnes/hour, depending on material Throughput capacity with MSW (Municipal Solid Waste) approx. 20 to 27 tonnes/hour, depending on material Bale weight 450 up to 600 kg, depends on material and bale length Volume hydraulic oil tank 1,000 l Baler dimensions built up with hopper 10,985 x 3,750 x 4,310 mm (l x w x h) Transport dimensions only baler 10,985 x 2,300 x 2,900 mm (L x w x h) Machine weight baler approx. 24 tons Condition of the press: The machine was partially overhauled and serviced in our workshop and, once the work was complete, tested in manual and automatic mode during operation. The following overhaul work was carried out: Machine cleaned, partially derusted and partially repainted Hydraulic oil tank emptied and cleaned Oil filter and air filter replaced, new hydraulic oil filled Press ram dismantled and cleaned All four rollers removed from the press ram and replaced Wire station with deflection rollers for the lower wire cleaned and made operational Side guides removed from the press ram, smoothed, mounted and readjusted Main hydraulic cylinder dismantled and disassembled for inspection Piston rod replaced, cylinder tube honed Complete seal set replaced, pressure test carried out Vertical and horizontal needle system for binding dismantled, cleaned, wire deflection rollers made functional and serviced Chain cleaned, greased, chain tension readjusted Drillomat cleaned, wire knife, drill shafts and drill fingers checked, retightened with torque and serviced Door contact switch checked and partially replaced. Emergency stop switch checked. Complete electrical wiring checked and partially replaced. Bearings of the wire guide rollers under the press replaced. New safety grilles for vertical and horizontal binding manufactured and installed. Machine checked, general maintenance work carried out and press tested in manual and automatic mode Scope of delivery: Isdpfszdnxgjx Aa Ijth Only the baler will be sold. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: ready for operation (used), Tecalemit TX34221 YD grease pump / central lubrication system with manual lever – 2.85 liter tank capacity, used, in good condition, 100% functional, scope of delivery as shown in the photos. Iedpszd I E Hjfx Aa Ieth

Condition: refurbished (used), Year of construction: 2012, machine/vehicle number: R-00620, load capacity: 260 kg, arm reach: 3,100 mm, controller manufacturer: R-30iA B-Size, teach pendant manufacturer: A05B-2518-C202#EGN, Refurbished FANUC M-900iA/260L manufactured in 2012.12. The robot comes with an R-30iA B-Size controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC Model: M-900iA/260L Model Number: A05B-1327-B503 Year of Manufacture Robot: 2012.12 Warranty term (months): 12   Payload (kg): 260 Reach (mm): 3100 Repeatability (mm): ± 0.3 Controlled Axes: 6-axis Installation Type: Floor, Upside-down, Wall, Angle Mount Weight (kg): 1720   Itjdpfx Aaszc E Hao Ioh Controller: R-30iA B-Size Year of Manufacture Cabinet: 2012.11 RCC Length (m): 7   Teach Pendant: A05B-2518-C202#EGN Teach Pendant Cable Length (m): 10

Condition: refurbished (used), Year of construction: 2017, machine/vehicle number: R-00601, load capacity: 210 kg, arm reach: 2,655 mm, controller manufacturer: R-30iB B-Size, teach pendant manufacturer: A05B-2255-C101#EGN, Refurbished FANUC R-2000iC/210F manufactured in 2017.04. The robot comes with an R-30iB B-Size controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC  Model: R-2000iC/210F Model Number: A05B-1333-B205 Year of Manufacture Robot: 2017.04 Warranty term (months): 12   Payload (kg): 210 Itodpfxjzcyh Ss Aa Ish Reach (mm): 2655 Repeatability (mm): ± 0.05 Controlled Axes: 6-axis Installation Type: Floor Mount Weight (kg): 1090   Controller: R-30iB B-Size Year of Manufacture Cabinet: 2017.04 RCC Length (m): 7   Teach Pendant: A05B-2255-C101#EGN Teach Pendant Cable Length (m): 10

Condition: refurbished (used), Year of construction: 2013, machine/vehicle number: R-00618, load capacity: 20 kg, arm reach: 1,813 mm, controller manufacturer: R-30iB A-Size, teach pendant manufacturer: A05B-2255-C101#EGN, Refurbished FANUC M-20iA/20M manufactured in 2013.03. The robot comes with an R-30iB A-Size controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC Model: M-20iA/20M Iodpfx Aajzcmb Sj Ioth Model Number: A05B-1222-B702 Year of Manufacture Robot: 2013.03 Warranty term (months): 12   Payload (kg): 20 Reach (mm): 1813 Repeatability (mm): ± 0.08 Controlled Axes: 6-axis Installation Type: Floor, Upside-down, Wall, Angle Mount Weight (kg): 250   Controller: R-30iB A-Size Year of Manufacture Cabinet: 2013.03 RCC Length (m): 7   Teach Pendant: A05B-2255-C101#EGN Teach Pendant Cable Length (m): 10  

Condition: refurbished (used), Year of construction: 2017, machine/vehicle number: R-00602, load capacity: 280 kg, arm reach: 3,103 mm, controller manufacturer: R-30iB B-Size, teach pendant manufacturer: A05B-2255-C101#EGN, Refurbished FANUC M-900iB/280L manufactured in 2017.02. The robot comes with an R-30iB B-Size controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC  Model: M-900iB/280L Model Number: A05B-1335-B203 Year of Manufacture Robot: 2017.02 Warranty term (months): 12   Payload (kg): 280 Itedpfjzcma Uex Aa Ieh Reach (mm): 3103 Repeatability (mm): ± 0.1 Controlled Axes: 6-axis Installation Type: Floor, Upside-down, Angle Mount Weight (kg): 1600   Controller: R-30iB B-Size Year of Manufacture Cabinet: 2017.04 RCC Length (m): 7   Teach Pendant: A05B-2255-C101#EGN Teach Pendant Cable Length (m): 10

Condition: refurbished (used), Year of construction: 2017, machine/vehicle number: R-00612, load capacity: 210 kg, arm reach: 3,100 mm, controller manufacturer: R-30iB B-Size, teach pendant manufacturer: A05B-2255-C101#EGN, Refurbished FANUC R-2000iC/210L manufactured in 2017.02. The robot comes with an R-30iB B-Size controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC  Model: R-2000iC/210L Model Number: A05B-1337-B261 Year of Manufacture Robot: 2017.02 Warranty term (months): 12   Payload (kg): 210 Reach (mm): 3100 Repeatability (mm): ± 0.05 Controlled Axes: 6-axis Installation Type: Floor Mount Itedpfozcmahox Aa Ish Weight (kg): 1350   Controller: R-30iB B-Size Year of Manufacture Cabinet: 2017.01 RCC Length (m): 7   Teach Pendant: A05B-2255-C101#EGN Teach Pendant Cable Length (m): 10

Condition: refurbished (used), Year of construction: 2021, machine/vehicle number: R-00616, load capacity: 210 kg, arm reach: 3,095 mm, controller manufacturer: R-30iB Plus, teach pendant manufacturer: A05B-2255-C101#EGN, Refurbished FANUC R-2000iC/210R manufactured in 2021.08. The robot comes with an R-30iB Plus controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC  Model: R-2000iC/210R Model Number: A05B-1334-B205 Year of Manufacture Robot: 2021.08 Warranty term (months): 12   Payload (kg): 210 Reach (mm): 3095 Repeatability (mm): ± 0.05 Ijdpszaq Dfefx Aa Ioth Controlled Axes: 6-axis Installation Type: Rack Mount Weight (kg): 1370   Controller: R-30iB Plus Year of Manufacture Cabinet: 2021.07 RCC Length (m): 7   Teach Pendant: A05B-2255-C101#EGN Teach Pendant Cable Length (m): 10

Condition: refurbished (used), Year of construction: 2012, machine/vehicle number: R-00617, load capacity: 260 kg, arm reach: 3,100 mm, controller manufacturer: R-30iA B-Size, teach pendant manufacturer: A05B-2518-C202#EGN, Refurbished FANUC M-900iA/260L manufactured in 2012.12. The robot comes with an R-30iA B-Size controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC Model: M-900iA/260L Model Number: A05B-1327-B503 Year of Manufacture Robot: 2012.12 Warranty term (months): 12   Isdpfx Aszcl Rrea Ioth Payload (kg): 260 Reach (mm): 3100 Repeatability (mm): ± 0.3 Controlled Axes: 6-axis Installation Type: Floor, Upside-down, Wall, Angle Mount Weight (kg): 1720   Controller: R-30iA B-Size Year of Manufacture Cabinet: 2012.11 RCC Length (m): 7   Teach Pendant: A05B-2518-C202#EGN Teach Pendant Cable Length (m): 10

Condition: refurbished (used), Year of construction: 2017, machine/vehicle number: R-00611, load capacity: 45 kg, arm reach: 2,650 mm, controller manufacturer: R-30iB A-Size, teach pendant manufacturer: A05B-2518-C302#EGN, Refurbished FANUC M-710iC/45M manufactured in 2017.03. The robot comes with an R-30iB A-Size controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC Model: M-710iC/45M Model Number: A05B-1125-B208 Year of Manufacture Robot: 2017.03 Warranty term (months): 12   Payload (kg): 45 Reach (mm): 2650 Repeatability (mm): ± 0.06 Controlled Axes: 6-axis Installation Type: Floor, Upside-down, Wall, Angle Mount Weight (kg): 570   Controller: R-30iB A-Size Iedjzcl Iqjpfx Aa Ieth Year of Manufacture Cabinet: 2017.02 RCC Length (m): 7   Teach Pendant: A05B-2518-C302#EGN Teach Pendant Cable Length (m): 12

Year of construction: 2022, condition: excellent (used), 5-axis Machining center independent clamp movement 16 positions tool magazine chip conveyor belt (horizontal) 2° chip conveyor belt (vertical) tool lenght probe 10 toolholders HSK 63 UPS 11 kW spindle with liquid cooling 5 axis blade diam 450 mm automatic greasing kit extra blade unit 90° on moveable carriage Iedpfxju A Uq Io Aa Isth wireless bor code reader

Condition: refurbished (used), Year of construction: 2013, machine/vehicle number: R-00580, load capacity: 20 kg, arm reach: 1,811 mm, controller manufacturer: R-30iA B-Size, teach pendant manufacturer: A05B-2518-C202#EGN, Refurbished FANUC M-20iA manufactured in 2013.05. The robot comes with an R-30iA B-Size controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC Model: M-20iA Model Number: A05B-1222-B202 Year of Manufacture Robot: 2013.05 Warranty term (months): 12 Iedpfxezcfvzs Aa Isth   Payload (kg): 20 Reach (mm): 1811 Repeatability (mm): ± 0.08 Controlled Axes: 6-axis Installation Type: Floor, Upside-down, Wall, Angle Mount Weight (kg): 250   Controller: R-30iA B-Size Year of Manufacture Cabinet: 2013.05 RCC Length (m): 7   Teach Pendant: A05B-2518-C202#EGN Teach Pendant Cable Length (m): 10  

Condition: refurbished (used), Year of construction: 2011, machine/vehicle number: R-00487, load capacity: 210 kg, arm reach: 2,655 mm, controller manufacturer: R-30iA B-Size, teach pendant manufacturer: A05B-2518-C202#EGN, FANUC R-2000iB/210F manufactured in 2011.09. The robot comes with an R-30iA B-Size controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC Model: R-2000iB/210F Model Number: A05B-1329-B205 Year of Manufacture Robot: 2011.09 Itjdpfx Aaezcfu Ds Ish Warranty term (months): 12   Payload (kg): 210 Reach (mm): 2655 Repeatability (mm): ± 0.3 Controlled Axes: 6-axis Installation Type: Floor Mount Weight (kg): 1240   Controller: R-30iA B-Size Year of Manufacture Cabinet: 2011.09 RCC Length (m): 14   Teach Pendant: A05B-2518-C202#EGN Teach Pendant Cable Length (m): 10  

Condition: refurbished (used), Year of construction: 2011, machine/vehicle number: R-00491, load capacity: 210 kg, arm reach: 2,655 mm, controller manufacturer: R-30iA B-Size, teach pendant manufacturer: A05B-2518-C202#EGN, FANUC R-2000iB/210F manufactured in 2011.09. The robot comes with an R-30iA B-Size controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC Model: R-2000iB/210F Model Number: A05B-1329-B205 Year of Manufacture Robot: 2011.09 Warranty term (months): 12   Payload (kg): 210 Reach (mm): 2655 Repeatability (mm): ± 0.3 Controlled Axes: 6-axis Installation Type: Floor Mount Weight (kg): 1240   Controller: R-30iA B-Size Year of Manufacture Cabinet: 2011.09 RCC Length (m): 14   Teach Pendant: A05B-2518-C202#EGN Teach Pendant Cable Length (m): 10   Itjdpfx Aaszcfuqs Ieh

Condition: refurbished (used), Year of construction: 2015, machine/vehicle number: R-00508, load capacity: 210 kg, arm reach: 2,655 mm, controller manufacturer: R-30iB B-Size, teach pendant manufacturer: A05B-2255-C101#EGN, Refurbished FANUC R-2000iB/210F manufactured in 2015.07. The robot comes with an R-30iB B-Size controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC Model: R-2000iB/210F Model Number: A05B-1329-B205 Year of Manufacture Robot: 2015.07 Warranty term (months): 12   Payload (kg): 210 Reach (mm): 2655 Isdpfxezcfuks Aa Ioth Repeatability (mm): ± 0.3 Controlled Axes: 6-axis Installation Type: Floor Mount Weight (kg): 1240   Controller: R-30iB B-Size Year of Manufacture Cabinet: 2015.06 RCC Length (m): 14   Teach Pendant: A05B-2255-C101#EGN Teach Pendant Cable Length (m): 10  

Condition: ready for operation (used), Year of construction: 2002, pressure 200 t chamfer lenght 3100 mm distance between columns 2550 mm stroke of upper beam 200 mm throat 300 mm dayligth 440 mm working feed 9.0 mm/sec return speed 80.0 mm/sec 265 bar Control konv. work height max. 965 mm total power requirement 15.0 kW weight 10500 kg range L-W-H 3360 x 1750 x 2800 mm - in checked conditions - machinevideo - Iedpfx Aajyu U A Ue Isth ?v=EcmvsA4AGfo Equipment: - simple / conventional electro-hydraulic press brake - pivoting operation, front left - electric, infinitely variable depth adjustment (Y1 Y2 axis) * Torsion shaft for parallelism - Electro-motorized backgauge (X axis) * with handwheel for fine adjustment * on recirculating ball screws * 2x manually adjustable stop fingers - manual (jog mode) and automatic cycle selector switch - manual table crowning - split set of roe foot upper tools ... H = 210 mm - 1x as good as new universal V-die block, reversible * with anti-corrosion grease * V openings in mm : 12/35/25 50 10/20/16/16 75 * Dimensions of the block in mm : 100 x 100 - 1x 1V die (continuous) - V opening in mm : 100 - various / further bending tools - 1x free-moving 2-hand/foot control - Operating instructions (PDF)

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 8,545 h, load capacity: 10,000 kg, lifting height: 16,200 mm, fuel type: diesel, construction height: 3,900 mm, power: 185 kW (251.53 HP), empty load weight: 39,820 kg, drive type: Diesel, construction width: 4,150 mm, Empty Container Reachstacker Transmission: Dana TE17300 Condition: Ready for operation and fully functional Technical condition: good Front tyre size: 14.00-24 Rear tyre size: 14.00-24 Iodpfx Aey S Hbxsa Ioth EN: Central greasing system, rear view camera, air-suspended driver's seat

Condition: refurbished (used), Year of construction: 2010, machine/vehicle number: R-00464, load capacity: 20 kg, arm reach: 3,110 mm, controller manufacturer: R-30iA B-Size, teach pendant manufacturer: A05B-2518-C202#EGN, Refurbished FANUC M-710iC/20L manufactured in 2010.05. The robot comes with an R-30iA B-Size controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC Model: M-710iC/20L Model Number: A05B-1125-B205 Year of Manufacture Robot: 2010.05 Warranty term (months): 12   Payload (kg): 20 Reach (mm): 3110 Repeatability (mm): ± 0.11 Controlled Axes: 6-axis Installation Type: Floor, Upside-down, Wall, Angle Mount Weight (kg): 540   Controller: R-30iA B-Size Year of Manufacture Cabinet: 2010.04 RCC Length (m): 7 Iodpozb Up Ijfx Aa Ioth   Teach Pendant: A05B-2518-C202#EGN Teach Pendant Cable Length (m): 10

Condition: refurbished (used), Year of construction: 2015, machine/vehicle number: R-00546, load capacity: 280 kg, arm reach: 2,655 mm, controller manufacturer: R-30iB B-Size, teach pendant manufacturer: A05B-2255-C101#EGN, Refurbished FANUC M-900iB/280 manufactured in 2015.08. The robot comes with an R-30iB B-Size controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC  Model: M-900iB/280 Model Number: A05B-1335-B205 Year of Manufacture Robot: 2015.08 Warranty term (months): 12   Payload (kg): 280 Reach (mm): 2655 Repeatability (mm): ± 0.1 Controlled Axes: 6-axis Installation Type: Floor, Upside-down, Wall, Angle Mount Itjdpfx Aszb Un Rea Ieh Weight (kg): 1700   Controller: R-30iB B-Size Year of Manufacture Cabinet: 2015.07 RCC Length (m): 7   Teach Pendant: A05B-2255-C101#EGN Teach Pendant Cable Length (m): 10

Condition: refurbished (used), Year of construction: 2017, machine/vehicle number: R-00599, load capacity: 125 kg, arm reach: 3,100 mm, controller manufacturer: R-30iB B-Size, teach pendant manufacturer: A05B-2255-C101#EGN, Refurbished FANUC R-2000iC/125L manufactured in 2017.02. The robot comes with an R-30iB B-Size controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC Model: R-2000iC/125L Model Number: A05B-1333-B261 Year of Manufacture Robot: 2017.02 Warranty term (months): 12   Payload (kg): 125 Reach (mm): 3100 Repeatability (mm): ± 0.05 Controlled Axes: 6-axis Installation Type: Floor Mount Weight (kg): 1115   Isdpfx Aezb Unwja Ieth Controller: R-30iB B-Size Year of Manufacture Cabinet: 2017.02 RCC Length (m): 7   Teach Pendant: A05B-2255-C101#EGN Teach Pendant Cable Length (m): 10

Condition: refurbished (used), Year of construction: 2017, machine/vehicle number: R-00607, load capacity: 7 kg, arm reach: 911 mm, controller manufacturer: R-30iB Mate, teach pendant manufacturer: A05B-2255-C101#EGN, Refurbished FANUC LR Mate 200iD/7L manufactured in 2017.01. The robot comes with an R-30iB Mate controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC Model: LR Mate 200iD/7L Model Number: A05B-1142-B301 Year of Manufacture Robot: 2017.01 Warranty term (months): 12   Payload (kg): 7 Reach (mm): 911 Repeatability (mm): ± 0.018 Controlled Axes: 6-axis Installation Type: Floor, Upside-down, Wall, Angle Mount Weight (kg): 27   Iodpfezb Unqex Aa Ijth Controller: R-30iB Mate Year of Manufacture Cabinet: 2017.01 RCC Length (m): 7   Teach Pendant: A05B-2255-C101#EGN Teach Pendant Cable Length (m): 12

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 12,105 h, load capacity: 10,000 kg, lifting height: 18,850 mm, fuel type: diesel, mast type: duplex, construction height: 10,795 mm, power: 168 kW (228.42 HP), empty load weight: 42,990 kg, drive type: Diesel, Empty Container Handler Load center: 1220 mm Mast type: Duplex Transmission: ZF WG211 automatic, 5/3 gears Condition: Operational and fully functional Technical condition: Very good Front tire size: 14.00-24 Front tire condition: 40 - 60% Rear tire size: 14.00-24 Rear tire condition: 40 - 60% ELME 584 sidespreader, 20ft-40ft, equipped with hooks and hydraulic clamp for double box lifting, +/-3° lateral tilt compensation, hydraulic sideshift +/- 600 mm Hydraulic, extendable spreader support on lifting frame, lift suspension via hydraulic accumulator, central lubrication system, automatic speed reduction depending on lift height, mast tilt, and if container(s) are clamped, engine preheater (230V), "one-touch" joystick function for automatic spreader adjustment (20'–40'), operator cab with air conditioning and sun blinds, air-suspended driver's seat with headrest and heating. Itjdpfxszd H Uaj Aa Ioh Safety features: - Hydraulic spreader support on lift mast (for container checker safety) - Lifting suspension by hydraulic accumulator - Central greasing system - Engine preheater (230V) - Air conditioning - Drive speed limitation depending on lifting height and mast tilt angle - One-touch joystick function for automatic spreader adjustment (20–40ft) - Air-suspended, heated driver's seat - Sun blinds at roof and rear windows Condition: inspected, repaired, serviced, and cleaned; ready for work.

Condition: used, functionality: fully functional, Year of construction: 2004, operating hours: 15,950 h, load capacity: 45,000 kg, lifting height: 14,700 mm, fuel type: diesel, power: 243 kW (330.39 HP), drive type: Diesel, Full-container reach stacker Load center: 1900 Transmission: Clark 15.5HR 36432-4 automatic Condition: Ready for operation and fully functional Ijdpfsy Rvkmex Aa Isth Technical condition: good Front tire size: 18.00-33 Rear tire size: 18.00-33 Elme 857 20‘-40ft toplift spreader including piggy-back 2x central greasing system on base machine and spreader, rear-view camera, all working lights in LED, hydraulically sliding driver's cabin

Condition: refurbished (used), Year of construction: 2017, machine/vehicle number: R-00576, load capacity: 45 kg, arm reach: 2,650 mm, controller manufacturer: R-30iB A-Size, teach pendant manufacturer: A05B-2255-C101#EGN, Refurbished FANUC M-710iC/45M manufactured in 2017.08. The robot comes with an R-30iB A-Size controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC Model: M-710iC/45M Model Number: A05B-1125-B208 Year of Manufacture Robot: 2017.08 Warranty term (months): 12   Payload (kg): 45 Reach (mm): 2650 Repeatability (mm): ± 0.06 Controlled Axes: 6-axis Installation Type: Floor, Upside-down, Wall, Angle Mount Weight (kg): 570   Controller: R-30iB A-Size Year of Manufacture Cabinet: 2017.07 RCC Length (m): 7   Itedpfxszb Aybo Aa Ish Teach Pendant: A05B-2255-C101#EGN Teach Pendant Cable Length (m): 12