ECOKRAFT LP 22

ECOKRAFT LP 22

Year of construction: 2019, condition: as good as new (ex-display), Aluminum flat conveyor including 4 suspension points Dim: 3000 + 520 x 105mm Conveyor belt width 400mm PVC conveyor belt incl. Studs and wave edge * optional with magnetic deflection roller at the end of the conveyor belt. * optionally with substructure Nledod Ra Ttepfx Akijh * Special designs in all versions possible.

Condition: excellent (used), Year of construction: 2008, HYPERTURN 665 MCplus - B-PowerMill Multi-Axis CNC Turning Center with automatic tool changer, Y-axis and B-axis, for complete machining of turned-milled parts. Integrated spindle motors (ISM) on main and sub-spindle with thermocompensation system (liquid cooled). Drive power: Main spindle - 29 kW Sub-spindle - 22 kW Speed range: Main spindle 0-5000 rpm Sub-spindle 0-7000 rpm Spindle interface (DIN 55026): Main spindle KK 6 (bore 65 mm) Sub-spindle KK 6 Y-axis: travel range +/- 50 mm The Y-axis is designed so that the resulting cutting forces are distributed over two axes, providing extremely high rigidity for all machining operations. B-PowerMill: For machining inclined surfaces and bores, a motor-driven milling spindle with a 24-position tool magazine is integrated into the upper slide system. The swivel range of 210° is infinitely adjustable and can be interpolated. Preloaded roller guides in all linear axes, digital drive system, integrated spindle encoder, state-of-the-art SINUMERIK 840D control technology, includes: * Hollow clamping cylinder incl. draw tube * Part ejector and coolant supply through the sub-spindle * 12-position VDI 30 radial tool turret with directional logic for up to 12 driven tool stations Swivel speed adjustable with feed switch. Performance data: Max. 6.7 kW at 2650 rpm Constant torque 25 Nm Speed range 0-5000 rpm - C-axis for main and sub-spindle - TRANSMIT software for easy C-axis programming * Parts catcher for finished parts * Sinumerik 840D * Chip conveyor with a programmable discharge height of 1200 mm (hinged belt type) * Coolant system integrated in the chip conveyor: 1 high-pressure pump with 14 bar 1 high-pressure pump with 14 bar incl. 20 µm fine filter 2 flushing pumps with 3.7 bar * Control cabinet air conditioning unit * Electrostatic oil mist separator * Hydraulic unit * Machine lamp * Interface for foot switch * Documentation Included: - Handwheel - PC keyboard - Network preparation - Tool monitoring - Swing-out window - Cleaning gun - Signal lamp Year of manufacture: 2008 Nledpfx Aksxz Ab Rsijh Machine No.: R7AW0401

Condition: like new (used), functionality: fully functional, cutting length (max.): 600 mm, cutting width (max.): 410 mm, The machine is in very good condition – like new. Nlsdpfxjy Tqybj Akieh Equipped with a vertical heating element and sealing jaws for packaging in PE (polyethylene) film – a complete set of jaws for laminates is available. Forming tube for packages with a width of 350 mm – other sizes are available. Technical data for ILAPAK Vegatronic 4000 VFFS: ▪️ Output: up to 140 packages/min ▪️ Machine type: Continuous Film Motion ▪️ Type: VFFS – Vertical Form Fill Seal Bag size: ▪️ Minimum width: 70 mm ▪️ Maximum width: 410 mm ▪️ Maximum length: 600 mm Supported films: ▪️ Heat-sealable films ▪️ Polypropylene (PP) ▪️ Laminates ▪️ PE (polyethylene) film Film roll: ▪️ Maximum roll width: 880 mm ▪️ Maximum outer diameter: 550 mm ▪️ Core diameter: 76 mm ▪️ Maximum roll weight: 100 kg Power supply: ▪️ 400 V ±5% ▪️ 3 phases + neutral ▪️ 50 Hz ▪️ 7.5 kW Compressed air: ▪️ 7 bar ▪️ 350–900 Nl/min Control: ▪️ Industrial PC ▪️ 8.4” touch panel ▪️ Memory for up to 100 programs Construction: ▪️ Stainless steel ▪️ Hygienic Open Frame design ▪️ Quick bag size changeover ▪️ Film centering ▪️ Servo drives Machine dimensions: ▪️ 1478 × 2336 × 1550 mm Weight: ▪️ Approx. 1500 kg

Condition: new, ⭐⭐⭐⭐⭐ (5.0) 42 ratings ✈️shipping : 45-day delivery ✈️ ✅✅✅Energy class A+++✅✅✅ ⚡️ Top service ⚡️ Fast delivery ⚡️ Great support! Nodpfx Akoc Uthdeiolh ⭐€10,850 EXCL.VAT & SHIPPING⭐ ►►Buy It Now◄◄ ✳️Keep your liquidity! We offer a variety of financing models to ensure your investment has the best chance of success. Contact us today to learn more about our hire-purchase, warranty or lease programs. ✳️ ➖➖➖➖➖ ►►►⌛⏰ FASTEST delivery time❗ ⌛⏰►►► ✨✨Buy directly from the manufacturer and secure the price and quality advantage!✨✨ Benefit from Proton's 40 years of experience in surface coating technologies. ➖➖➖➖➖ ☘️Eco-Friendly☘️⚡️Green Energy⚡️☘️ ⭐ Paint Booth – WETLINE-SP-1500 ✔️ Internal dimensions: 1390 mm L * 1500 mm W * 1400 mm H ✔️Pool height : 561 [mm] ✔️Filter system : double layer water curtain ✔️Filtering material : city water, plate filter and mechanical separator with backwash ✔️Filter material cleaning : thin and thick grid ✔️ Pump output : 1.5 [kw/h] 940 [d/d] x 1 piece ✔️Number of fans : 1 piece ✔️Fan performance : 5,400 m3/h x 1 ✔️Fan motor power : 3 kw/h ⭐The cabins can be made of galvanized sheet metal or stainless steel. They can be designed to be integrated into the automatic and manual systems. ⭐At the pool there is a platform for material and personal safety. The platform covers the entire pool. ⭐In the Filterline wet painting booth, environmental pollution is prevented by the simultaneous use of 3 different filter systems. ⭐Wet paint particles, sucked in the air by a suction fan, are caught by the water curtain at the back of the cabin and transported into the pool. ⭐Wet paint particles in the trace amount that are not caught by the water curtain are caught by the separators on the suction ducts on the back of the water curtain, and the fresh air outlet is from the flue. ⭐The backwash system is applied in the separator section to help the process of retaining the wet paint particles of the separators. The filtration efficiency, whose contact area is increased by spraying wash water through the nozzles, is maximized. ⭐While paint dirty water accumulated in the basin enters the pump suction chamber, it goes through a coarse and a fine mesh to prevent clogging of the pump spray water, thus ensuring paint particles are retained. ⭐When the dirty water in the pool becomes unusable, it can be disposed of from the waste water valve located behind the grates in the suction department. ⭐By using a paint separator system, the water in the pool is cleaned from the paint and used continuously. ⭐The separated paint residues are drained by a filter press and must be disposed of properly. ⭐Price quoted is for the smallest standard size in stainless steel. All devices/machines are new, not used. Do you want a special configuration ❗ Call us now❗ ☀️ 2 YEAR WARRANTY ☀️ ☀️We have CE certificates for all our machines and ATEX certificates for the necessary machines.☀️

Condition: reconditioned (used), working length 3600 mm Working width 1140 mm Working height 820 bis 1050 mm WEINIG RF15 Return Conveyor System ----- Suitable for use after a chamfering, planing, and milling machine with a maximum feed speed of approximately 22 m/min. For the continuous return transport of workpieces to the operator. After passing through the planer, the workpieces are transferred to a roller conveyor, where they are conveyed transversely and then taken over by a driven roller conveyor. This conveyor directs the workpieces onto a downstream longitudinal roller conveyor back to the operator and also serves as a parts buffer. Manufacturer’s technical specifications: Workpiece length: 250–3,600 mm Workpiece width: 30–230 mm Min. workpiece thickness: 10 mm Max. feed rate of the planer: 22 m/min Cross conveyor with 2 integrated roller conveyors: Cross conveyor length: 1,140 mm Constant conveyor speed: 30 m/min Max. cycles per minute: 40 Roller conveyor length: 2,200 mm Constant speed: 30 / 60 m/min Gear motor: 1 kW (1.3 PS) Operating voltage: 220/380 volts, 50 hertz Compressed air connection: 6 bar Longitudinal roller conveyor (non-driven): Length: 1,700 mm Width: 160 mm Swing-mounted, adjustable incline Nlsdpfexpn Tnex Akijh Special equipment: Extension of the longitudinal roller conveyor (non-driven) by 3,000 mm ----- Price of the above machine available upon request! ----- (Technical data according to the manufacturer—subject to change without notice!)

Condition: refurbished (used), Year of construction: 2005, functionality: fully functional, grinding width: 650 mm, Equipment: type plate available, Kündig Botop, sanding unit on top roller, pneumatic shoe, sanding unit on bottom roller, pneumatic shoe. Machine has been completely overhauled, new carpet, new rollers. Nodovmt D Rspfx Akijlh

Condition: used, Year of construction: 2004, Planer and moulder Nodpfxjunbrbo Akijlh Weinig Powermat 2000 PowerLock - Technical data Working width 30 - 300 mm Working height 19 - 200 mm First lower tool holder Motor with brake 18.5 KW Speed 8000 rpm Tool flight circle 125 - 180 2nd tool holder First right tool holder Motor with brake 15 KW Tool flight circle 93 - 200 3rd tool holder First left-hand tool holder Motor with brake 15 KW Tool flight circle 93 - 200 mm 4th tool holder First upper tool holder Motor with brake 37 KW Tool flight circle 93 - 200 5th tool holder Second lower tool holder Motor with brake 22 KW PowerLock tool holder Speed 8000 rpm Tool flight circle 93 - 225 Feed system Frequency-controlled feed, infinitely variable 6 - 36 m/min.

Year of construction: 2017, condition: excellent (used), Included: screw conveyor; vibrating conveyor pipe with vibration motor drive. Total height: approx. 9250 mm Effective conveying height: 5800 mm Outer diameter: Ø 1200 mm Njdpfxjinwfie Akislh Conveyor cross section: 300 x 100 mm Feeding height: approx. 1650 mm (machine) approx. 3100 mm (incl. support) discharge height: approx. 8900 mm (incl. support) number of spiral shelves: approx. 32 pieces heat exchanger surface: approx. 27,5 m² number of cooling/heating circuits: 32 pieces Material: stainless steel So far in use for conveying and cooling of granules and glass fibers (approx. 2.5 t/h) Free loading; Currently, the device can still be viewed built in operation.

Condition: used, overall weight: 40,000 kg, first registration: 04/2009, Schwarzmüller G404 Nljdoyrdhhepfx Akioh Unladen weight: 8,580 kg Gross weight: 40,000 kg Ramps: mechanical Leaf suspension Errors and omissions excepted!

Condition: new, Year of construction: 2026, operating hours: 2 h, functionality: fully functional, Pelletizing plant for a wide range of materials such as wood, miscanthus, agricultural by-products and waste products (hay, straw, corn straw...) animal feed... This is a complete system (compact system) which is built on a base frame and consists of the following components: Nlsdsvlz H Ropfx Akijh Storage container for raw material 4 m³, including agitator Inclined mixer for raw material including level sensors and fully automatic moisture dosing Dosing container for pressing aids (e.g. corn starch) Dosing screw for optimal material feeding of the press (speed-controlled) Press 15 kW, with horizontal round die, discharge chute, temperature monitoring, overfill protection..... Conveyor belt for pellet removal, discharge height approx. 2.5 m Drum sieve for dust removal and cooling of the pellets The entire system is operated centrally using a Siemens PLC via touch display! In addition, all parameters are permanently monitored so that the system is shut down if a problem occurs! The system is designed and prepared for the operation of a second press! Price excl. VAT! !!!!! Attention!! we are constantly looking for sales and service partners (worldwide) !!!!!