Used Grease for sale (520)

Condition: refurbished (used), Year of construction: 2010, machine/vehicle number: R-00464, load capacity: 20 kg, arm reach: 3,110 mm, controller manufacturer: R-30iA B-Size, teach pendant manufacturer: A05B-2518-C202#EGN, Refurbished FANUC M-710iC/20L manufactured in 2010.05. The robot comes with an R-30iA B-Size controller including iPendant. Gbedpfxszb Up Ie Ahmsr   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC Model: M-710iC/20L Model Number: A05B-1125-B205 Year of Manufacture Robot: 2010.05 Warranty term (months): 12   Payload (kg): 20 Reach (mm): 3110 Repeatability (mm): ± 0.11 Controlled Axes: 6-axis Installation Type: Floor, Upside-down, Wall, Angle Mount Weight (kg): 540   Controller: R-30iA B-Size Year of Manufacture Cabinet: 2010.04 RCC Length (m): 7   Teach Pendant: A05B-2518-C202#EGN Teach Pendant Cable Length (m): 10

Condition: refurbished (used), Year of construction: 2017, machine/vehicle number: R-00599, load capacity: 125 kg, arm reach: 3,100 mm, controller manufacturer: R-30iB B-Size, teach pendant manufacturer: A05B-2255-C101#EGN, Refurbished FANUC R-2000iC/125L manufactured in 2017.02. The robot comes with an R-30iB B-Size controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC Model: R-2000iC/125L Model Number: A05B-1333-B261 Year of Manufacture Robot: 2017.02 Warranty term (months): 12   Payload (kg): 125 Reach (mm): 3100 Repeatability (mm): ± 0.05 Controlled Axes: 6-axis Installation Type: Floor Mount Weight (kg): 1115   Controller: R-30iB B-Size Gbjdpfx Ajzb Unwshmer Year of Manufacture Cabinet: 2017.02 RCC Length (m): 7   Teach Pendant: A05B-2255-C101#EGN Teach Pendant Cable Length (m): 10

Condition: new, travel distance X-axis: 6,000 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 600 mm, rapid traverse X-axis: 30,000 m/min, rapid traverse Y-axis: 20,000 m/min, table load: 1,000 kg, with multi-angle head for efficient and productive 5-sided machining of long parts, such as beams, profiles, tubes, etc. • Max. travel distances: X-axis: 6000 mm working range Y-axis: 800 mm working range Z-axis: 600 mm • Max. load capacity: 1500 kg • Main spindle drive power: 11 kW asynchronous motor • Main spindle speed: 8000 rpm • Tool holder: SK 40 • Rapid traverse rate X-axis: approx. 30000 mm/min • Rapid traverse rate Y-axis: approx. 20000 mm/min • Drilling capacity: ø 36 mm in S355 • Thread cutting: M20 in S355 • Servomotors for separate drive of the Y and Z axes with ball screw; X-axis with helical and hardened rack and pinion drive • Limit and reference switches in non-contact design • Spindle overload protection • Robust, precise cross table, generously sized • Safety device combined with light curtain and/or safety fence • Tool diameter: max. 100 mm • Tool length: max. 270 mm • Approximate footprint (L x W x H): 9050 x 3600 x 3150 mm • Total weight: approx. 8 tons • Customer-side connections: Connection power: 30 kW / 63 A • Compressed air: 6 – 8 bar • Control system: Heidenhain TNC7 Basic • Main computer: MC 355 with 19" FullHD multi-touch screen • Mobile machine control panel with keyboard TE 350 - Tool changer, 24-position - Minimum quantity lubrication and/or coolant system - Chip conveyor including discharge chute Gjdpfsznlkzox Ahmobr Heidenhain options, such as: - Heidenhain electronic handwheel - Heidenhain 3D probing system for workpiece measurement - Heidenhain CAD import software option - Heidenhain tool length measuring system - 6 pcs. Mechanical-hydraulic vises MSH 150, clamping width 300 mm - Pendulum operation duo (divided working area) - Multi-angle head (moving, automatically interchangeable, controlled rotary axis 360°, lockable every 15°, automatic tool changer, 10-position, angle head length approx. 215 mm, usable length approx. 160 mm, machine-side mounting: SK 40 with 4-point clamping system, hydraulic, tool-side design: BENZ HSK 50 or comparable, translation 1:1, max. speed 3000 rpm, cycle operation, max. torque: 100 Nm, lubrication: grease/continuous, weight approx. 50 kg, minimum quantity lubrication with 1-2 nozzles.

Condition: ready for operation (used), Year of construction: 2002, pressure 200 t chamfer lenght 3100 mm distance between columns 2550 mm stroke of upper beam 200 mm throat 300 mm dayligth 440 mm working feed 9.0 mm/sec return speed 80.0 mm/sec 265 bar Control konv. work height max. 965 mm total power requirement 15.0 kW weight 10500 kg range L-W-H 3360 x 1750 x 2800 mm - in checked conditions - machinevideo - Gbodpjyu U A Usfx Ahmjr ?v=EcmvsA4AGfo Equipment: - simple / conventional electro-hydraulic press brake - pivoting operation, front left - electric, infinitely variable depth adjustment (Y1 Y2 axis) * Torsion shaft for parallelism - Electro-motorized backgauge (X axis) * with handwheel for fine adjustment * on recirculating ball screws * 2x manually adjustable stop fingers - manual (jog mode) and automatic cycle selector switch - manual table crowning - split set of roe foot upper tools ... H = 210 mm - 1x as good as new universal V-die block, reversible * with anti-corrosion grease * V openings in mm : 12/35/25 50 10/20/16/16 75 * Dimensions of the block in mm : 100 x 100 - 1x 1V die (continuous) - V opening in mm : 100 - various / further bending tools - 1x free-moving 2-hand/foot control - Operating instructions (PDF)

Condition: refurbished (used), Year of construction: 2015, machine/vehicle number: R-00595, load capacity: 7 kg, arm reach: 717 mm, controller manufacturer: R-30iB Mate, teach pendant manufacturer: A05B-2255-C101#EGN, Refurbished FANUC LR Mate 200iD manufactured in 2015.05. The robot comes with an R-30iB Mate controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC Model: LR Mate 200iD Gbsdpfxszb Ax Ro Ahmsr Model Number: A05B-1142-B202 Year of Manufacture Robot: 2015.05 Warranty term (months): 12   Payload (kg): 7 Reach (mm): 717 Repeatability (mm): ± 0.018 Controlled Axes: 6-axis Installation Type: Floor, Upside-down, Wall, Angle Mount Weight (kg): 25   Controller: R-30iB Mate Year of Manufacture Cabinet: 2015.04 RCC Length (m): 7   Teach Pendant: A05B-2255-C101#EGN Teach Pendant Cable Length (m): 10

Year of construction: 2025, condition: new, Demo machine Year of manufacture: 2025 Travel range: 2500x1300x200mm Machine frame in 19mm Forescolour, consisting of milling table (X-axis), gantry (Y-axis), Z-axis unit in compact board, and base frame with adjustable machine feet. Milling bed as sacrificial board in 19mm MDF. Table openings longitudinally and transversely pre-configured. Mechanical set consisting of profile rails including profile rail carriages, ball screw and precision rack gears. All components assembled, pre-lubricated including test run, immediately ready for operation. Control set consisting of control cables, energy chains, planetary gears, stepper motors, high-performance drivers, power supply and toroidal transformer, all preinstalled in the control cabinet, as well as sensors for each axis. Control relay for automatic actuation of the existing extraction system. Brush seals for dust protection and protective equipment compliant with CE regulations: includes moving extraction unit and one-sided mounted laser scanner for work area monitoring, with 275° and 5.5m field range. (Machine positioned in a room corner) Manual control panel equipped with all necessary machine functions, including emergency stop and dead man’s switch. Tool length sensor for determining tool length and active offset of the reference point. High-frequency spindle with 2.2 kW, incl. clamping nut, frequency inverter, power filter, breaking resistor, and collet set. Built-in monitor, incl. mini PC with Windows 11, control software Beamicon2, mouse and keyboard, pre-installed in an ergonomic console. CAD license Rhino 8.0 and CAM license Estlcam V12, as well as all necessary documentation, will be sent by email prior to delivery. Includes milling bed designed as a vacuum table, consisting of four individually controllable segments. Cross table made of PE with top layer in MDF. Becker vacuum pump with a capacity of 100m³/h, oil-lubricated. A 16 Amp, 400 V AC plug is required for the vacuum pump electrical connection. The customer must provide HDF 3mm raw on both sides for the whole vacuum table (2500x1300mm) as a sacrificial board. (Recommended application: machining of coated wood-based panels) Gbjdpfxsxc Rmqs Ahmsr Includes 10-piece tool set consisting of: 3 pcs. 5 mm Z2 (HF52REVHM) 6 pcs. 4 mm Z1 (HF41REVHM) 1 pc. 5mm Z3 (HF53SRECAR) (Tool selection can be adapted as needed) Includes maintenance package in systainer: - 150 ml grease gun - 400 g cartridge high-performance grease - 500 ml can of silicone spray grease - Grease nipple incl. hose and 30mm face mill with indexable inserts Availability: short notice Location: Flörsheim

Condition: refurbished (used), Year of construction: 2017, machine/vehicle number: R-00588, load capacity: 280 kg, arm reach: 3,103 mm, controller manufacturer: R-30iB B-Size, teach pendant manufacturer: A05B-2255-C101#EGN, Refurbished FANUC M-900iB/280L manufactured in 2017.04. The robot comes with an R-30iB B-Size controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC  Model: M-900iB/280L Model Number: A05B-1335-B203 Year of Manufacture Robot: 2017.04 Warranty term (months): 12   Payload (kg): 280 Reach (mm): 3103 Repeatability (mm): ± 0.1 Controlled Axes: 6-axis Installation Type: Floor, Upside-down, Angle Mount Weight (kg): 1600   Controller: R-30iB B-Size Year of Manufacture Cabinet: 2017.03 RCC Length (m): 7   Teach Pendant: A05B-2255-C101#EGN Gbjdpezayvwsfx Ahmjr Teach Pendant Cable Length (m): 10

Condition: refurbished (used), Year of construction: 2016, machine/vehicle number: R-00583, load capacity: 165 kg, arm reach: 2,655 mm, controller manufacturer: R-30iB A-Size, teach pendant manufacturer: A05B-2255-C101#EGN, Refurbished FANUC R-2000iC/165F manufactured in 2016.12. The robot comes with an R-30iB A-Size controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC  Model: R-2000iC/165F Gedpfx Aszayvkshmjbr Model Number: A05B-1333-B201 Year of Manufacture Robot: 2016.12 Warranty term (months): 12   Payload (kg): 165 Reach (mm): 2655 Repeatability (mm): ± 0.05 Controlled Axes: 6-axis Installation Type: Floor Mount Weight (kg): 1090   Controller: R-30iB A-Size Year of Manufacture Cabinet: 2016.12 RCC Length (m): 14   Teach Pendant: A05B-2255-C101#EGN Teach Pendant Cable Length (m): 10

Condition: used, pressure 110 t throat 290 mm stroke 20-124 mm no. of strokes 60 / 90 Hub/min ram adjustment 85 mm table surface area ca. 920 x 590 mm ram surface ca. 530 x 280 mm distance table to upper part of the press ca. 450 mm hole in the table ca. 180 x 300 mm mm table height ca. 750 mm tool hole in ram Ø 50 mm Number of working hours 8214 h Gsdpjt Ei Hnjfx Ahmjbr distance table to upper part of the press mm weight of the machine ca. 5,5 t dimensions ca. 2000 x 2000 x 2600 mm overhauled by the manufacturer Helmerding in 2014 including conversion to new press safety control. Operating hours read since overhaul in 2014: 8214 Documentation of press safety control available electrical grease central lubrication Hydraulic clutch-brake combination Mechanical break plate in the ram two-hand operation foot control

Condition: refurbished (used), Year of construction: 2012, machine/vehicle number: R-00614, load capacity: 185 kg, arm reach: 3,060 mm, controller manufacturer: R-30iA B-Size, teach pendant manufacturer: A05B-2518-C202#EGN, Refurbished FANUC R-2000iB/185L manufactured in 2012.12. The robot comes with an R-30iA B-Size controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC Model: R-2000iB/185L Model Number: A05B-1329-B211 Year of Manufacture Robot: 2012.12 Warranty term (months): 12   Payload (kg): 185 Gbodpfjzap Rksx Ahmor Reach (mm): 3060 Repeatability (mm): ± 0.2 Controlled Axes: 6-axis Installation Type: Floor Mount Weight (kg): 1290   Controller: R-30iA B-Size Year of Manufacture Cabinet: 2012.11 RCC Length (m): 7   Teach Pendant: A05B-2518-C202#EGN Teach Pendant Cable Length (m): 10  

Condition: new, Machine according to DIN 8605: Lathe with increased accuracy. Distance between centers: 700 mm Distance between centers: 170 mm Swinging diameter over bed: Ø 340 mm Swinging diameter over carriage: Ø 190 mm Bed width: 260 mm Travel of longitudinal slide: 600 mm Travel of cross slide: 220 mm Travel of top slide: 110 mm Carriage length: 410 mm Carriage width: 150 mm Guide length of bed carriage: 380 mm Lathe tool shank cross-section: 20x20 mm Distance from lathe center to top slide: 34 mm Swiveling range of top slide (rest): 60/120° Main spindle: Spindle mount DIN 55029 (camlock): S 5 Spindle bore: Ø 50 mm Internal taper according to DIN 7178: 1:22 Spindle diameter in the front bearing: Ø 70 mm Max. chuck diameter: Ø 200 mm Max. faceplate diameter: Ø 200 mm Spindle speeds: 40-3000 RPM Speed control: Stepless Mechanical speed steps: 4 Main drive: Power at 40% duty cycle: 5.3 kW Max. rated torque at main spindle: 640 Nm Feed: 20 (28) longitudinal feeds Z: 0.045-0.787 mm/rev 20 (28) cross feeds X: 0.023-0.406 mm/rev Threads: 20 (28) metric threads (standard equipment): 0.4 - 7.0 mm 32 inch threads (with optional gear set D3Z200): 56 - 4 TPI 28 module threads (with optional gear set D3Z200): 0.2 - 3.5 32 diametral pitch threads (with optional gear set D3Z200): 112 - 8 Tailstock: Arbor diameter: Ø 50 mm Internal taper of arbor: MK 3 Arbor travel: 120 mm Lateral adjustment: ± 13 mm Permissible workpiece weights Suspended: 50 kg Supported by tailstock: 150 kg Further standard equipment (standard accessories): Includes machine stand and integrated 3-axis digital display, German language, with color display 1 length stop 1 center, taper 1:22, DIN 7178 1 center MK3 Godpjdctnbefx Ahmjbr 1 chuck key 1 key part 1 grease gun 3 hexagon head screws M16x60 - DIN 933 3 hexagon nuts M16-8 DIN 934 1 simple tool holder 1 key A13x17 DIN 837 1 open-end wrench SW 19 1 open-end wrench SW 22 1 hexagon screwdriver SW 5 1 hexagon screwdriver SW 6 1 hexagon screwdriver SW 8 3 shear pins 1 box wrench 1 operating manual incl. parts list 1 electrical documentation 1 test report Packaging (for truck transport with pallet and plastic cover) Machine according to CE Note: Illustrations show special equipment / accessories, among other things!

Condition: used, SMW Steady Rest Type SLU-X1-ms including mounting bracket for CNC lathe DMG Mori CTX 500 Condition: Used Features: Housing: fully sealed Safety: integrated safety valve Gbedpfx Ahsyx U H Ajmjr Stroke control: prepared for end position monitoring Lubrication: connection for central lubrication (oil or grease) Technical Data Centering range (without chip guard): Ø 4 - 64 mm Centering range (with 3-piece chip guard): Ø 11 - 64 mm Operating pressure (min./max.): 8 / 35 bar Max. clamping force per roller: approx. 400 daN Centering accuracy: 0.02 mm (across the entire range) Repeatability: 0.005 mm Weight approx. 12 kg

Condition: reconditioned (used), Year of construction: 2014, operating hours: 697 h, functionality: fully functional, working width: 650 mm, area performance: 4,200 m²/h, overall weight: 706 kg, warranty duration: 12 months, tank capacity: 116 l, HAKO SCRUBMASTER B115 R TB650 SCRUBBER NEW 6V 250Ah GEL BATTERIES (SIAP) (4x) Manufactured in 2014 with 697 hours of operation. 650mm cleaning head (TB650) equipped with two new medium-hard disc brushes for use on any surface. New polyurethane squeegee rubbers resistant to oil, grease, and petroleum products. New rubber guards around the brush head prevent water from splashing outside the machine's outline. The device is equipped with a new, durable drain hose and a new suction hose. A new suction turbine ensures high water suction power from the squeegee. Each device we offer has individually taken photos; you buy exactly what you see. TECHNICAL DATA: Power supply voltage: 24 V Brush working width (mm): 650 Suction width (mm): 860 Theoretical capacity (m²/h): 4200 Clean/dirty water tank capacity (l): 116/116 Number of brushes (pcs): 2 Brush speed (rpm): 210 Total weight, ready to use (kg): 706 Gradeability (%): 10 INCLUDED: NEW 6V 250Ah SIAP GEL BATTERIES (x4) NEW NEOS 24V 30A BATTERY CHARGER NEW 24V 600W suction turbine NEW 330mm PPL 0.5 disc brushes (x2) NEW drain hose NEW suction hose NEW head guard rubbers (x2) Built-in battery charger Squeegee blade with new rubbers Gbsdpfx Ahszubv Hemor 5L Tenzi Normal fluid - FREE KEY FEATURES: The 116-liter tank allows for a large volume of cleaning solution, eliminating the need to frequently stop for refills. The machine's design makes it highly maneuverable. The small turning radius allows for operation even in narrow passages and alleys. The parabolic squeegee beam ensures precise suction of the solution from the cleaned surface. The ergonomically designed cockpit and centrally located operator's seat provide excellent visibility of the surface being cleaned. The large working width (650 mm) ensures high surface coverage. The control panel is very clear and intuitive to use.

Year of construction: 2022, condition: excellent (used), 5-axis Machining center independent clamp movement 16 positions tool magazine chip conveyor belt (horizontal) 2° chip conveyor belt (vertical) tool lenght probe Gjdpfx Ahou A Uq Ijmsbr 10 toolholders HSK 63 UPS 11 kW spindle with liquid cooling 5 axis blade diam 450 mm automatic greasing kit extra blade unit 90° on moveable carriage wireless bor code reader

Condition: used, mileage: 429,300 km, power: 290 kW (394.29 HP), first registration: 04/2015, fuel type: diesel, number of seats: 38, gearing type: automatic, emission class: euro6, color: white, brakes: retarder, Equipment: ABS, air conditioning, bathroom, electronic stability program (ESP), navigation system, parking heater, * Our internal number: 1069 * S 511 HD * nice vehicle * First registration 04/2015 * 36+1+1 - coach seating * laterally and backwards adjustable * ROUTE APPROVAL with standing places * Toilet * Air conditioning * Auxiliary heater * Navigation * DVD / monitors * Convector heating * Trunk with lift kinematics * Wood floor look * Tinted windows * Middle entry camera, ... * Paintwork white - DECO film * Maintenance new 06/2025, incl. oil filter, air filter, all fuel filters, greasing, ... * Air conditioning service 06/2025, ... * 2 x new MICHELIN tires - front axle * PICK UP price / collection price * All information without guarantee * Please refer to our terms and conditions Gedjvzvx Tepfx Ahmobr * We reserve the right of intermediate sale * The customer is obliged to independently ascertain the condition and equipment of the goods / vehicle! * etc. * Vehicle in use / mileage and condition may vary!

Condition: new, maximum load weight: 45,115 kg, overall weight: 53,000 kg, axle configuration: 3 axles, Equipment: ABS, More vehicles can be found at [website address]. Excerpt from the equipment list. Complete equipment list available upon request. Loading area: Loading area with approximately 30 mm thick hardwood flooring. 8 pairs of lashing rings that can be folded outwards (LC 10,000 daN). Gjdpfx Ahszhd Nismebr Kingpin: JOST kingpins (mechanical) with a 2-speed gearbox for an approximate lifting capacity of 24 tons (approx. 50 tons test load). Tires: 385/65 R 22.5. TPMS tire pressure monitoring system according to ECE R 141. Data transmission to the tractor unit is via the standardized EBS interface according to ISO 11992. For correct display, the tractor unit must be able to transmit and display this data. Axles and suspension: BPW axles, technically rated at 10,000 kg each. 1st and 3rd axles are hydro-mechanically forced-steered and mounted on a turntable. 2nd axle is fixed. Air-suspended with lifting and lowering valve. Axle spanner. Braking system: Wabco braking system in accordance with EU regulations with EBS-E (4S3M) without connecting lines to the tractor unit. Electrical system: Electrical system in accordance with EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3). ASPÖCK-UNIBOX on the front connection bar with 24N, 24S & 15-pin sockets according to ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098. Steel structure: Steel structure made of high-strength fine-grain steels. Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa). Painting: Complete steel structure automatically blasted with a shot blasting system after welding. Second blasting with corundum for optimal adhesion of the coating system. Final coating with 2 layers of 2K topcoat, solid color in RAL 3002 Carmine Red according to the RAL 841GL system. Rear part is metallic and painted in RAL 9010 (pure white). Rims in silver. Coating tested in a salt spray test according to ISO 9227-NSS. Sealing of cavities with special wax. Accessories: Loading area with approximately 30 mm thick hardwood flooring. 2-inch kingpin. One galvanized steel front panel (EN12642-XL), approximately 1,200 mm high. Yellow-red air couplings on the galvanized front connection bar. 4 pieces of wheel chocks with holders on the front panel. Storage for approximately 1,000 mm lashing bars in the rear central beam. On the gooseneck and rear panel, one holder each on the left and right sides for warning signs including a socket. Yellow reflector tape according to EU regulations on the side and rear of the trailer. 10 pairs of lashing bar pockets for lashing bars approximately 100 x 50 mm in the outer frame of the loading area. European reflector signs (red-yellow) on the rear of the trailer. One holder for a rotating beacon on the rear of the trailer. One mud flap on the rear of the trailer. Manual and description on a USB stick. Speed stickers 80 km/h on the rear and both sides. Electro-hydraulic unit. 1 maneuvering coupling with reinforcement bolted to the end cross member. Load manometer for determining the axle loads including a load diagram. Central lubrication system BEKAMAX (Pico) with standard grease NLGI-2 and a removable guard around the pump. Follow-up steering from the front and rear using a cable remote control via push buttons, with single-axle steering control (without installation in the tractor unit). 7 pairs of galvanized lashing bars approximately 100 x 50 mm, approximately 1,000 mm high. 4 pairs of lashing bar strip rails, mounted transversely in the loading area, for las

Condition: new, Year of construction: 2024, operating pressure: 140 bar, total length: 800 mm, total height: 1,700 mm, total width: 1,000 mm, water tank capacity: 95 l, power: 3 kW (4.08 HP), temperature: 45 °C, TurboClean Evo II is a professional high-pressure washer made of stainless steel. The washing process takes place in closed circuit with water with special detergent with max. temperature 45oC. Working pressure is 140 bar, thereby hard to reach places and heavily soiled items of carbon deposits, grease or oil can be thoroughly washed. The flap is equipped with pneumatic drives, to increase the safety and the quality of work the washing machine. It is also equipped with oil skimmer, a brush and an air gun. There are cleaning nozzles installed on the window, which improve visibility and ease of work. It is a perfect solution for workshops and parts remanufacturing. Manufactured in Poland. Gbedpfsq Ru Amjx Ahmer

Year of construction: 2025, condition: used, functionality: fully functional, laser power: 1,500 W, machine/vehicle number: ELKY-2504021, For sale is a professional, continuous laser cleaning machine (Continuous Wave) of the type GL-C-CWM-1500, manufactured by EraserLaser GmbH. The unit was manufactured in 2025, has very few operating hours, and is in excellent, fully functional condition. This system is ideally suited for the fast, thorough, and non-contact removal of rust, paint, oils, grease, and oxide layers from metallic surfaces. Thanks to its high power of 1500 watts and the particularly long hose package, the unit offers maximum flexibility in professional workshop or industrial environments. The exact, cumulative operating hours can be read transparently directly on the system display. Product advantages & highlights: High flexibility: The 15-meter-long fiber optic hose package enables comfortable working, even on large components, in hard-to-reach areas, or on scaffolding. Precise control: Parameters such as laser power, frequency, and beam width can be set precisely via the intuitive 7-inch touch display and saved as presets. Gentle surface treatment: The variably adjustable pulse rate allows the heat input to be regulated precisely – also ideal for more sensitive workpieces or thin sheets. Reliable cooling: An integrated Hanli water cooling system ensures stable temperature monitoring and enables trouble-free operation in continuous mode. Ergonomic cleaning gun: Equipped with a red preview laser for accurate alignment of the cleaning area and an automatic compressed air control to protect the optics from dirt particles. Technical data at a glance: Model: GL-C-CWM-1500 (mobile steel housing on heavy-duty rollers) Gbsdpfoziwwijx Ahmor Laser type: CW fiber laser (Continuous Wave), laser class 4 Wavelength: 1070 nm Laser power: 1500 watts (continuously adjustable from 10% to 100%) Laser frequency: 1000 Hz – 9000 Hz Cleaning width: 1 mm to 150 mm (variably adjustable) Fiber length (hose package): 15 meters Power connection: 220V AC / 32A connection (protected with 25A) Condition & scope of delivery: Condition: Very well-maintained used condition, low operating hours, optically and technically flawless. Protective lenses and optics are clean and fully operational. Scope of delivery: Laser cleaning system GL-C-CWM-1500 including 15m hose package and cleaning gun. Important safety note: The operation of a system of laser class 4 requires the mandatory wearing of approved laser safety glasses (DIN EN 207 for 1070 nm) as well as compliance with applicable occupational safety regulations (including extraction).

Condition: refurbished (used), Year of construction: 2011, operating hours: 1,730 h, functionality: fully functional, working width: 430 mm, area performance: 1,700 m²/h, overall weight: 179 kg, warranty duration: 12 months, water tank capacity: 30 l, HAKO HAKOMATIC B30 TB430 SCRUBBER NEW 12V 85Ah SIAP GEL BATTERIES (2x) Manufactured in 2011 with 1730 hours of operation 430mm cleaning head (TB430) equipped with a new medium-hard disc brush, allowing work on any surface. New polyurethane squeegee rubbers, resistant to contact with oily liquids, grease, and petroleum products. A built-in battery charger simplifies daily operation. A new protective rubber around the brush head prevents water from splashing outside the machine's contour. The device is equipped with a new, durable drain hose and a new suction hose. A new suction turbine ensures high water suction power from the squeegee. Each device we offer is individually photographed; you buy exactly what you see. TECHNICAL DATA: Power supply voltage: 24 V Brush working width (mm): 430 Suction nozzle working width (mm): 760 Theoretical capacity (m²): 1700 Tank capacity (l): 30/30 Machine weight, ready to use (kg): ~179 Power output (kW): 1.13 Gbsdoztw Ayopfx Ahmor INCLUDED: NEW 12V 85Ah SIAP GEL BATTERIES (2x) NEW 24V 400W suction turbine NEW 430mm PPL 0.5 disc brush NEW drain hose NEW suction hose NEW head guard rubber Built-in battery charger Squeegee blade with new oil-resistant rubbers 5L Tenzi Normal fluid - FREE KEY FEATURES: The 30-liter tank allows for a large volume of cleaning solution, eliminating the need to frequently stop for refills. The machine's design makes it highly maneuverable. The small turning radius allows for operation even in narrow passages and alleys. The parabolic squeegee beam ensures precise solution extraction from the cleaned surface. The large working width (430mm) ensures high surface coverage. The control panel is easy to read and intuitive to use.

Condition: ready for operation (used), Year of construction: 2007, travel distance X-axis: 161 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 580 mm, number of axes: 7, This 7-axis Nakamura Tome WY-250 was manufactured in 2007. It features a twin spindle configuration with Y-axis capabilities on both turrets, allowing for versatile machining. The machine includes a maximum Z-axis travel of 580 mm and Y-axis travel of mm. If you are looking to get high-quality turning capabilities, consider the Nakamura Tome WY-250 horizontal turning machine we have for sale. Contact us for further details. Gbodpfxey N Spcs Ahmer • Travels: • X1: 160.5 mm • X2: 165 mm • Z1/Z2: 580 mm • Y1: mm • Y2: / mm • Included tooling: • 4x external tool holders • 4x tool holders for simultaneous mounting of 2 opposite tools • 6x boring bar holders • Driven toolholders (HEIMATEC): • 4x radial • 4x axial • Collet holders (Bellegrandi): • Main spindle: MSCNT70-A6” for BA & BD collets size 70, complete with related cups • Counter spindle: MSCTNR70-A5” for BA collets size 70, complete with spring ejector Additional equipment • IEMCA Master 880/33/P bar feeder (2003), S/N: 0200347S03 • Application: Automatic bar feeder for CNC lathes • Capacity: • Max bar length: 3300 mm (to be confirmed) • Max bar diameter: up to Ø80 mm (model family reference) • Guide channels: Ø65 mm included; Ø70 mm currently installed and can be supplied with the machine • Features: Automatic loading/feeding, synchronization with lathe cycle, compatible with spindle liner/guide channel systems, heavy-duty frame • Note: Sold together with the Nakamura Tome WY-250; some accessories/guide channels may belong to the lathe setup • Complete set of hand jaws (“Manine”) for parts unloader (parts unloader itself not specified) Machine Condition / Technical Status- IMPORTANT The machine is currently being sold in its present technical condition and the seller will NOT carry out the repairs before sale. Main known issues / condition points: • Lower turret driven tooling function not working correctly • Air/oil lubrication system issues detected • Presence of rust inside the lower turret gearbox • Upper turret gearbox found filled with NBU15 grease although the system should operate with air/oil lubrication • Z1 axis linear guides/slides require replacement • Z2 axis linear guides/slides require replacement • Geometry deviations detected during machine inspection • Various spindle/brake/hydraulic cylinder run-out deviations measured • Several bearings, ball screws, seals, guide rollers, belts, lubrication components and wipers require replacement according to the attached spare parts listInspection highlights: • Machine geometry and spindle parallelism were measured and documented • Run-out values were detected on both spindles and hydraulic chuck systems • Multiple axis lubrication and protection components require maintenance/replacement • Detailed spare parts list availableIncluded documentation: • Technical inspection report • Geometry verification report • Spare parts/replacement list • Photos of damaged/worn componentsThe machine remains a highly equipped Nakamura Tome WY-250 Super Mill platform, but prospective buyers should consider the required repair and maintenance work when evaluating the machine. Technical inspection and spare parts documentation available upon request. Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: reconditioned (used), Year of construction: 2017, operating hours: 544 h, functionality: fully functional, working width: 900 mm, area performance: 5,800 m²/h, overall weight: 727 kg, warranty duration: 12 months, water tank capacity: 116 l, HAKO SCRUBMASTER B115 R TB900 SCRUBBER NEW 6V 250Ah GEL BATTERIES (SIAP) (4x) Manufactured in 2017 with 544 hours of operation. 900mm cleaning head (TB900) equipped with two new medium-hard disc brushes for use on any surface. New polyurethane squeegee rubbers, resistant to oil, grease, and petroleum products. New rubber guards around the brush head prevent water from splashing outside the machine's outline. The device is equipped with a new, durable drain hose and a new suction hose. A new suction turbine ensures high water suction power from the squeegee. Each device we offer has individually taken photos; you buy exactly what you see. Gbodpfx Asztqucehmsr TECHNICAL DATA: Power supply voltage: 24 V Brush working width (mm): 900 Suction width (mm): 1100 Theoretical capacity (m²/h): 5800 Clean/dirty water tank capacity (l): 116/116 Number of brushes (pcs): 2 Brush speed (rpm): 210 Total weight, ready to use (kg): 727 Gradeability (%): 10 INCLUDED: NEW 6V 250Ah SIAP GEL BATTERIES (x4) NEW 24V 600W suction turbine NEW 445mm PPL 0.5 disc brushes (x2) NEW drain hose NEW suction hose NEW head guard rubbers (x2) Built-in battery charger Squeegee blade with new rubbers 5L Tenzi Normal fluid - FREE KEY FEATURES: The 116-liter tank allows for a large volume of cleaning solution, eliminating the need to frequently stop for refills. The machine's design makes it highly maneuverable. The small turning radius allows for operation even in narrow passages and alleys. The parabolic squeegee beam ensures precise suction of the solution from the cleaned surface. The ergonomically designed cockpit and centrally located operator's seat provide excellent visibility of the surface being cleaned. The large working width (900 mm) ensures high surface coverage. The control panel is very clear and intuitive to use.

Condition: reconditioned (used), Year of construction: 2016, operating hours: 612 h, functionality: fully functional, working width: 900 mm, area performance: 5,800 m²/h, overall weight: 727 kg, warranty duration: 12 months, water tank capacity: 116 l, HAKO SCRUBMASTER B115 R TB900 SCRUBBER NEW 6V 250Ah GEL BATTERIES (SIAP) (4x) Manufactured in 2016 with 612 hours of operation. 900mm cleaning head (TB900) equipped with two new medium-hard disc brushes for use on any surface. New polyurethane squeegee rubbers, resistant to oil, grease, and petroleum products. New rubber guards around the brush head prevent water from splashing outside the machine's outline. The device is equipped with a new, durable drain hose and a new suction hose. A new suction turbine ensures high water suction power from the squeegee. Each device we offer has individually taken photos; you buy exactly what you see. TECHNICAL DATA: Power supply voltage: 24 V Brush working width (mm): 900 Suction width (mm): 1100 Theoretical capacity (m²/h): 5800 Clean/dirty water tank capacity (l): 116/116 Number of brushes (pcs): 2 Brush speed (rpm): 210 Total weight, ready to use (kg): 727 Gradeability (%): 10 INCLUDED: NEW 6V 250Ah SIAP GEL BATTERIES (x4) NEW 24V 600W suction turbine Gbjdpfxeztqlne Ahmer NEW 445mm PPL 0.5 disc brushes (x2) NEW drain hose NEW suction hose NEW head guard rubbers (x2) Built-in battery charger Squeegee blade with new rubbers 5L Tenzi Normal fluid - FREE KEY FEATURES: The 116-liter tank allows for a large volume of cleaning solution, eliminating the need to frequently stop for refills. The machine's design makes it highly maneuverable. The small turning radius allows for operation even in narrow passages and alleys. The parabolic squeegee beam ensures precise suction of the solution from the cleaned surface. The ergonomically designed cockpit and centrally located operator's seat provide excellent visibility of the surface being cleaned. The large working width (900 mm) ensures high surface coverage. The control panel is very clear and intuitive to use.

Condition: reconditioned (used), Year of construction: 2012, operating hours: 693 h, functionality: fully functional, working width: 650 mm, area performance: 4,200 m²/h, overall weight: 706 kg, warranty duration: 12 months, water tank capacity: 116 l, HAKO HAKOMATIC B115 R TB650 SCRUBBER NEW 6V 250Ah GEL BATTERIES (SIAP) (4x) NEW NEOS 24V 30A CHARGER Manufactured in 2012 with 693 hours of operation 650mm cleaning head (TB650) equipped with two new medium-hard disc brushes for work on any surface. New polyurethane squeegee rubbers, resistant to contact with oil, grease, and petroleum products. New rubber guards around the brush head prevent water from splashing outside the machine's outline. The device is equipped with a new, durable drain hose and a new suction hose. A new suction turbine ensures high water suction power from the squeegee. Each device we offer has individually taken photos; you buy exactly what you see. TECHNICAL DATA: Power supply voltage: 24 V Brush working width (mm): 650 Suction width (mm): 860 Theoretical capacity (m²/h): 4200 Clean/dirty water tank capacity (l): 116/116 Number of brushes (pcs): 2 Brush speed (rpm): 210 Total weight, ready to use (kg): 706 Gradeability (%): 10 INCLUDED: NEW 6V 250Ah SIAP GEL BATTERIES (x4) NEW NEOS 24V 30A BATTERY CHARGER NEW 24V 600W suction turbine NEW 330mm PPL 0.5 disc brushes (x2) NEW drain hose NEW suction hose NEW head guard rubbers (x2) Squeegee blade with new rubbers 5L Tenzi Normal fluid - FREE Gsdpfx Ajztp Unohmobr KEY FEATURES: The 116-liter tank allows for a large volume of cleaning solution, eliminating the need to frequently stop for refills. The machine's design makes it highly maneuverable. The small turning radius allows for operation even in narrow passages and alleys. The parabolic squeegee beam ensures precise suction of the solution from the cleaned surface. The ergonomically designed cockpit and centrally located operator's seat provide excellent visibility of the surface being cleaned. The large working width (650 mm) ensures high surface coverage. The control panel is very clear and intuitive to use.

Condition: new, Year of construction: 2026, functionality: fully functional, MP160 Pressure Parts Washer – Precision Cleaning with a Closed-Loop System The MP160 pressure parts washer is a professional machine designed for intensive cleaning of industrial, workshop, and automotive components. The enclosed working cabinet, operating pressure of 5–8 bar, and the ability to heat the detergent to 70°C ensure effective removal of oils, grease, carbon deposits, process residues, and other stubborn contaminants. The closed-loop system allows the cleaning solution to be reused, reducing detergent consumption and helping maintain a cleaner, more organized workplace. The MP160 is ideal for cleaning components with complex shapes, narrow channels, recesses, and other hard-to-reach surfaces. Key Advantages of the MP160 Parts Washer Gedpjztwkdjfx Ahmebr 5–8 bar operating pressure – enables effective removal of stubborn contaminants from components with complex geometries. Detergent heating up to 70°C – improves the effectiveness of the cleaning solution and helps reduce cleaning time. Closed-loop cleaning solution system – reduces detergent consumption and the amount of waste generated during operation. Dual-function cleaning gun – allows the application of cleaning solution with compressed air or blow-off cleaning using compressed air alone. Component drying function – after cleaning, components can be blown dry using compressed air. Operating pressure gauge – allows continuous monitoring of operating pressure. Clear control panel – provides independent control of the power supply and heating system. Steel cabinet construction – designed for regular use in workshops and industrial facilities. Adjustable leveling feet – ensure stable positioning and proper leveling of the workstation. Parts Cleaning Concentrate Included The MP160 parts washer comes with 2 liters of concentrate for workshop parts washers. When preparing a 10% solution, the concentrate is sufficient to produce up to 20 liters of ready-to-use cleaning solution. For the best cleaning results, it is recommended to use an aqueous solution at a temperature of between 40 and 70°C. The appropriate concentration should be selected according to the type of surface, the nature of the contamination, and the cleaning method used. Recommended Solution Concentration Immersion cleaning: 5–10% Low-pressure cleaning: 2–10% High-pressure cleaning: 2–5% Concentrate pH value: 12.8 Effective Cleaning of Hard-to-Reach Surfaces The pressure spray system allows the cleaning solution to be directed precisely onto contaminated areas. This makes the MP160 suitable for cleaning gaps, recesses, openings, channels, and components with irregular shapes. After cleaning, the operator can switch the gun to compressed-air-only mode. This makes it easier to remove residual cleaning solution from the component's surface and prepare parts for further servicing, inspection, assembly, or refurbishment. Standard Equipment Dual-function gun for spraying cleaning solution and blow-off cleaning with compressed air Cleaning solution heating system Control panel Operating pressure gauge Adjustable stabilizing feet 2 liters of concentrate for workshop parts washers Technical Specifications Specification Value Cabinet capacity 160 l Maximum detergent temperature 70°C Cleaning solution tank capacity 8–14 l Operating pressure 5–8 bar Overall dimensions 770 × 600 × 1,330 mm Weight 47 kg

Condition: new, Year of construction: 2026, functionality: fully functional, 140L Parts Washer The 140L parts washer is a professional workshop cleaning machine designed for the effective removal of oil, grease, deposits, and other stubborn contaminants from mechanical parts and components. The closed-loop cleaning solution system allows for efficient use of the cleaning fluid while reducing consumption. The large tank capacity, robust construction, and convenient working area make the 140L workshop parts washer an excellent choice for mechanical workshops, automotive service centers, manufacturing facilities, and maintenance departments. Key Advantages of the 140L Workshop Parts Washer 140-liter tank capacity – provides ample space for cleaning larger parts and components. Up to 90 liters of cleaning solution – the large working fluid capacity allows for longer operation without frequent refilling. Efficient 2.7–3.6 l/min pump – enables precise application of the cleaning solution to the components being cleaned. Closed-loop system – allows the cleaning solution to be reused and helps reduce consumption. Automatic lid lock – improves operator safety and convenience. Stable four-leg construction – provides excellent stability during operation. Practical work surface – provides a convenient place to put tools, parts, and accessories. Parts Cleaning Concentrate Included The MP140 parts washer comes with 2 liters of concentrate for workshop parts washers. When preparing a 10% solution, the concentrate is sufficient to produce up to 20 liters of ready-to-use cleaning solution. The appropriate concentration should be selected according to the type of surface, the nature of the contamination, and the cleaning method used. Gbedpfx Aheztwh Aemjr Recommended Solution Concentration Immersion cleaning: 5–10% Low-pressure cleaning: 2–10% High-pressure cleaning: 2–5% Concentrate pH value: 12.8 Parts Washer Construction and Operating Principle The 140L parts washer is equipped with a flexible hose fitted with a spray nozzle. The cleaning solution is drawn from the tank and delivered through the pump to the hose, allowing the operator to precisely direct the stream onto contaminated surfaces. For proper operation, the pump inlet must be completely submerged in the cleaning solution. This ensures an adequate flow of cleaning fluid during operation. The tank lid opens conveniently and automatically locks in the raised position, improving operator safety. The entire unit is mounted on a robust steel frame with four legs, providing stability even during intensive use. With dimensions of 1,130 × 540 × 885 mm, the parts washer can be installed in most workshop environments while still providing a large and practical working area. Standard Equipment Working tank with automatically locking lid Pump with flexible hose and spray nozzle Steel frame with four legs Work surface beneath the tank Assembly and operating instructions 2 liters of concentrate for workshop parts washers Technical Specifications Specification Value Tank capacity 140 l Maximum cleaning solution capacity 90 l Pump flow rate 2.7–3.6 l/min Power supply 230 V Overall dimensions 1,130 × 540 × 885 mm Working tray dimensions 800 × 500 mm Weight 43 kg