Used Hall Fan for sale (4,297)

Condition: new, Year of construction: 2021, Industrial Fabric Storage Hall for Sale – Approx. 500 m² For sale: a well-maintained industrial fabric hall with an area of approximately 500 m². The hall is suitable for use as a warehouse, production facility, or for storing timber, machinery, and equipment. - Approximate floor area: 500 m² - Robust steel frame construction - Durable PVC/fabric cladding - Large sliding doors - Separate personnel access door - Good internal headroom - Easy access for forklifts and other machinery Fedpfxjz Im Ede Aa Iogh - The hall can be dismantled and reassembled at another location - Currently erected and available for inspection Price: Upon request / negotiable. Dismantling and loading for transportation can also be arranged separately.

Condition: excellent (used), Year of construction: 2019, Fan Systems WITT A-RNZ9/560/710/2 Centrifugal fan Fgodpfx Aaez E Nqqo Ijh 2019, unused, mounted on frame with 45KW motor, see plates for full spec

Condition: like new (used), functionality: fully functional, extraction nozzle diameter: 300 mm, Two exhaust fans in like-new condition are for sale. They ran very little. They can be tested on-site. The price is for the pair. Fgedpfxszz Scws Aa Ioh The intake diameter is 300 mm. The motor power is 11 kW.

Condition: good (used), Reznor UDSA Gas-Fired Warm Air Heater UDSA Gas-Fired Warm Air Heater – efficient, even at peak performance The most well-known unit from REZNOR is the UDSA gas-fired warm air heater, which ensures even air distribution in industrial halls. This easy-to-install recirculating air unit is available in 14 performance sizes, from 7 to 97 kW, and consists of a heat exchanger, gas burner, and an exhaust gas fan. The combustion air can be drawn either from the outside or from the room, as standard. The UDSA warm air heater from REZNOR guarantees even air distribution in the heated hall. Its patented heat exchanger sets new standards in terms of flow behavior and heat transfer, ensuring an efficiency of over 92 percent. UDSA: compact, revolutionary, and groundbreaking. With this generation of units, halls can be heated in a particularly economical way – directly, that is, without central heating – using decentralized, modulating gas-fired warm air heaters. REZNOR UDSA Gas-Fired Warm Air Heater. The advantages: Efficiency of more than 92% Unit is also suitable for vertical mounting Low NOx emissions Innovative combustion concept Quiet operation With CE system certification, version B or C Compact design for easy installation Even heat distribution Standard vertical and horizontal air guide vanes Modulation of the heating output up to 50% EC technology ErP Ready These units are direct-fired gas warm air heaters with fan-assisted atmospheric multi-gas burners. The installation of the gas warm air heater, including the gas and exhaust connections, must be carried out by an authorized installation company. These gas warm air heaters are suitable for: - Natural gas or liquefied gas operation Fgodpfxex Ihg Is Aa Ieh - Recirculating air operation - Intake temperatures below 5°C with a stainless steel heat exchanger * - Heating operation with 1 stage or 2 stages* Control via room thermostat and heating control switch - Ventilation° Control via ECOtronic TN - L° with day-night-week program - Exhaust gas extraction via roof, version B or C ° - Exhaust gas extraction through the outer wall, version C ° Gas warm air heater type: UDSA025-3 Gas appliance type: B22P-C12-C32-C52-C62 Intended use: DE Gas category: I2ELL Gas type: G20 Natural gas Connection pressure: 20 mbar Nozzle pressure: 8.20 mbar Maximum nominal heat input (Hs) QN: 30.08 kW Maximum nominal heat input (Hi) QN: 27.75 kW Maximum nominal heat output: 25.53 kW Minimum nominal heat output: Connection voltage: 230V 1N, 50Hz Air volume flow: 2385 m3/h Protection class: IP20 You can find more items – new and used – in our shop! International shipping costs on request!

Condition: good (used), Reznor UDSA Gas-Fired Warm Air Heater UDSA Gas-Fired Warm Air Heater – efficient, even at peak loads. The most well-known device from REZNOR is the UDSA gas-fired warm air heater, which ensures uniform air distribution in industrial halls. This easy-to-install unit is available in 14 power sizes, from 7 to 97 kW, and consists of a heat exchanger, gas burner, and an exhaust fan. The combustion air can be drawn either from the outside or from the room, as standard. The UDSA warm air heater from REZNOR guarantees uniform air distribution in the heated hall. Its patented heat exchanger sets new standards in terms of flow behavior and heat transfer, ensuring an efficiency of over 92 percent. UDSA: compact, revolutionary, and innovative. Fsdpfsx Ihiijx Aa Isgh With this generation of devices, halls can be heated in a particularly economical way directly – without a central heating system – using decentralized, modulating gas-fired warm air heaters. REZNOR UDSA Gas-fired warm air heater. The advantages: Efficiency of over 92% The unit is also suitable for vertical mounting Low NOx emissions Innovative combustion concept Quiet operation With CE system certification, version B or C Compact design for easy installation Uniform heat distribution Standard vertical and horizontal air deflection vanes Modulation of the heating output up to 50% EC technology ErP Ready These devices are directly heated gas-fired warm air heaters with fan-assisted atmospheric multi-gas burners. The installation of the gas-fired warm air heater, as well as the gas and exhaust connections, must only be carried out by an approved installation company. These gas-fired warm air heaters are suitable for: - Natural gas or LPG operation - Recirculation operation - Intake temperatures below 5°C with stainless steel heat exchanger * - Heating operation, 1-stage or 2-stage* control via room thermostat and heating control switch - Ventilation* control via ECOtronic TN - L* with day/night/week program - Exhaust gas extraction via roof, version B or C * - Exhaust gas extraction through the outer wall, version C * Gas-fired warm air heater type: UDSA015-4 Gas appliance type: B22P-C12-C32-C52-C62 Intended use: DE Gas category: I2ELL Gas type: G20 Natural gas Connection pressure: 20 mbar Nozzle pressure: 7.80 mbar Max. rated heat input (Hs) QN: 17.60 kW Max. rated heat input (Hi) QN: 15.86 kW Max. rated heat output: 14.59 kW Min. rated heat output: Connection voltage: 230V 1N, 50Hz Air flow rate: 1360 m3/h Protection class: IP20 You can find more items – new and used – in our shop! International shipping costs on request!

Condition: good (used), Centrifugal fan, Fan, 75 kW Fan, Used machine Fgsdpoua Eu Nefx Aa Ieh Overall dimensions : 2030 x 1750 x 1490 mm Air flow rate : 50 760 m3/h

Condition: excellent (used), 🔥 Industrial Axial Fan JOUNING JAF-DA-24 2HP 400V 230 CMM 🔥 For sale: high-quality industrial axial fan from the renowned manufacturer JOUNING BLOWER CO., LTD. (Taiwan). ✅ Used only a few times – condition is virtually like new ✅ Ideal for warehouses, production halls, industrial ventilation ✅ Robust metal construction – heavy, professional-grade equipment Fgjdpfxeyycdxe Aa Ieh 📊 Technical specifications: Model: JAF-DA-24 Power: 2 HP (approx. 1.5 kW) Power supply: 400V / 3-phase RPM: 1400 Capacity: 230 m³/min (~13,800 m³/h) Static pressure: 38 mmAq Frequency: 50 Hz Year of manufacture: 2016 🛠️ Condition: Sporadically used Fully operational, no technical issues Excellent visual condition – as shown in photos No damages, ready for immediate use 📦 Included: Complete fan set as shown in the pictures 🚚 Shipping / Collection: Pallet shipping available Personal collection possible Assistance with transport organization provided

Condition: used, System Hall Moulder Infeed Table (2005) with Hydraulic Drive Used moulder infeed table for sale, manufactured by System Hall AB, Sweden. It consists of a chain cross transfer conveyor and an infeed section with pneumatic hold-downs, and it feeds timber into the moulder automatically and evenly. The hydraulic motors have had their seal kits replaced. Specifications: Fodpfjz H I R Eox Aa Iogh Manufacturer: System Hall AB, Falkenberg, Sweden Year: 2005 (CE) Overall length: 7.5 m Height: 1.85 m Infeed section length: 2.25 m Infeed section width: 0.9 m Drive: hydraulic (separate hydraulic power unit with electric motor), SEW gear motors Pneumatic cylinders for clamping and positioning Chain cross transfer with roller chains Included: hydraulic power unit, 4 toothed pulleys.

Condition: like new (used), functionality: fully functional, overall weight: 200 kg, total width: 800 mm, total length: 1,000 mm, total height: 500 mm, 2026 Weishaupt WM-G10/3-A ZM Monarch Industrial Gas Burner – 100–1,000 kW – Only 3 Months' Use – Complete Controls & Gas Train. Fgodpfez Iucwsx Aa Ijh Manufactured 2026 and used for approximately three months as a temporary winter heating solution at a commercial facility. Removed from service following the site's transition to an electrified heat-pump heating system. Burner was operational prior to removal. Complete with associated Weishaupt controls and gas train/components as pictured. Original purchase/parts receipts available.

Condition: used, Year of construction: 1986, functionality: fully functional, machine/vehicle number: 25787, rotational speed (max.): 1,500 rpm, inlet: 400 mm, input voltage: 380 V, extraction nozzle diameter: 400 mm, input frequency: 50 Hz, input current: 12 A, Description For sale is a robust industrial extraction fan / chip extraction fan from a stationary extraction system of a wood processing production facility. The fan was in regular use until recently. Before the sale, a test run was carried out: the fan starts reliably and runs smoothly for its age. The start-up was documented on video; the video can be sent to serious potential buyers upon request. Fsdpfsz Ikxzex Aa Iegh The scope of delivery also includes the existing control cabinet of the extraction system, including the fan control. The control cabinet is complete. Based on the labeling, it can be seen that the control originally controlled other functions of the filter system in addition to the fan (including vibrator and discharge). Technical data fan / motor Motor manufacturer: Rüetschi & Co. AG, electric motors, CH-5040 Schöftland Motor type: KMER 160 M-4 Motor No.: 25787 Power: 11.0 kW / 15 hp Motor voltage according to nameplate: 380 / 660 V Current according to motor nameplate: 23.0 / 13.0 A Frequency: 50 Hz Speed: 1,500 rpm Protection class: IP44 Insulation class: B Design: stationary industrial radial / extraction fan Control cabinet / control System designation: Extraction system Year of construction control: 06/1995 Rated voltage: 3 x 400 V / 50 Hz Power: 11 kW Rated current: 23 A Fuse rating: 35 A Control voltage: 230 V Circuit diagram no.: 95-189-1 Existing control cabinet including fan control included in the scope of delivery Condition Used, functional condition with signs of wear and tear due to age and use. The current test run was successful. Inspection and functional demonstration possible by arrangement. Video of the test run available upon request. Location / Dismantling Location: 3608 Thun, Switzerland. The fan and the control cabinet are still installed. Dismantling, removal, loading and transport are the responsibility of the buyer and will be carried out at his expense and risk. Terms of sale Sale from the location. Sale in the existing used condition, as inspected. No guarantee or warranty, insofar as legally permissible. Technical specifications provided to the best of our knowledge; errors and prior sale reserved. Inspection on site is possible and recommended by arrangement. Selling price: 2,100.00 EUR Price net, any applicable statutory taxes and duties. Export, customs clearance and import duties are the responsibility of the buyer.

Year of construction: 2023, condition: used, functionality: fully functional, Hosokawa Alpine hammer mill Type UPZ 500 Year of construction: 2023 Weight: 1300 kg Capacity/max: 5,910 l/min Dimensions: approx. 230x110x129 cm Fgodpfxez Iam Ie Aa Ieh Documentation available This lot is located in room 3 Hosokawa Alpine centrifugal fan with electric motor on a steel base frame. Details: Brand: Hosokawa Alpine Type: centrifugal fan Drive: electric motor Design: housing with protective cover and connection/piping Frame: steel base frame Color: gray with blue motor Condition: used

Condition: used, Year of construction: 1994, used in top condition cleaned functionality tested Manufacturer: Höcker Polytechnik Type: Year of manufacture: 6/94 Machine no.: 37273 Slow-speed operation, approx. 1400 rpm: 1460 Motor kW: 18.5 Connection diameter mm: 450 / 450x350 Pressure Pa: 2800 Air flow rate: 13200 m³/h Space requirement, approx. L x W x H mm: 2000x1200x1600 Weight, approx. kg: 150 Total connected load kW: 18.5 Fgsdpfxoz Np I Se Aa Ish Location: 97447 Gerolzhofen, free loading, unpackaged Handover in the current condition as inspected without guarantee and warranty

Condition: used, Year of construction: 2017, functionality: fully functional, machine/vehicle number: Ventilator VRZ 1120/63/3 WSN 180, power: 55 kW (74.78 HP), Radial industrial fan with a robust, welded sheet steel construction. Operational volume flow: 9.0017 m³/s; total pressure difference: 2001 Pa; shaft power: 20.8 kW. Low operating hours, as it was used exclusively for testing purposes. Very good condition. Very high brand quality: Zenner fan; consoles, impellers, and housing are fully welded; Küenle motor. Fodpfx Aaszzaz Io Iegh Includes a set of vibration dampers, compensators with guide vanes on the pressure and suction sides; color: blue according to RAL 5015.

Condition: used, functionality: unexamined, For sale is a used, single Schuko radial fan with a directly mounted three-phase motor. According to the nameplate, the motor output is 4 kW, the rated speed is 2,900 rpm, the rated voltage is 380 V, and the frequency is 50 Hz. Scope of delivery: fan housing with impeller and mounted electric motor, as shown in the photos. This is not a complete exhaust system. Fgjdpfx Ajz Iuiwja Ish The fan shows age-related and usage-related dirt and paint chipping. No current function test has been performed. Therefore, the functionality of the motor and fan cannot be confirmed. The fan is sold for inspection and possible repair or as a source of spare parts. The year of manufacture, exact model designation, air flow rate, and pressure are unknown. Inspection is possible by appointment at the location in Thun, Switzerland. The fan is sold in its current, untested condition without any guarantee of functionality or warranty. Collection, loading, and transport are to be organized and paid for by the buyer. In the event of export, any applicable customs clearance and import costs will be borne by the buyer.

Year of construction: 2016, condition: used, Name: Used Centrifugal Fan Fjdpfx Aaez Innao Isgh Manufacturer: REITZ Type: KXE 050-035530-00 Year built: 2016 Speed: 2.960 / 2.809, max.: 3138 rpm Driving force: 45 kW Throughput m³/h: V= 355 m3/min Material: regular steel Dimensions: L 2.300 x W 1.200 x H 1.420 mm Empty weight: Approx. 900 kg Technical doc.: yes, in German language Message: Intake temperature 20° and max. temperature 80°. Is unused, therefore as good as new! Accessories: Legs Condition: Used Price: On request

Condition: good (used), functionality: fully functional, total width: 20,200 mm, total length: 12,000 mm, total height: 10,750 mm, Professional Industrial Tent Hall Hallbyggarna Jonsereds – 242 m² For sale: a high-quality, lightly used industrial tent hall manufactured by the Swedish company Hallbyggarna Jonsereds, featuring a heavy-duty steel supporting structure and durable PVC fabric cover. The hall was purchased in Sweden, professionally dismantled, and is currently located in Latvia, ready for installation at a new location. Hall dimensions: - Width – 20.2 m - Length – 12.0 m - Total area – 242.4 m² - Side wall height – approx. 8.0 m - Maximum height – approx. 10.75 m The hall is particularly suitable for: - manufacturing facilities - warehouses and storage - machinery storage - raw material storage - bulk material storage - woodworking - agricultural and industrial purposes - other industrial applications Additional technical information and drawings are available upon request. Fsdez Iudnjpfx Aa Iogh The hall can be viewed in its dismantled condition in Straupe Parish, Cēsis Municipality, Latvia. This type of structure is significantly more robust and designed for professional industrial use. It should not be compared with lightweight PVC storage tents or basic temporary shelters. Price: EUR 30,000 (VAT is not included)

Condition: used, Year of construction: 1988, CRANE HALL with ADDITION 492 m² + 288 m² with 2 x 10-ton crane runways *for DIY enthusiasts* DEMAG, year of construction 1988 Crane hall (all dimensions are approximate) Width: 13.50 m Length: 36.50 m Eaves height: 8.89 m Ridge height: 9.25 m Roof slope: 3.05° Snow load at previous location: approx. 85 kg/m² Crane runways: 2 pieces Crane runway 1: 10 tons Cantilever at a height of: 8.85 m, the same for both cranes Hook height at 7.00 m, the same for both cranes Serial No. 1: Serial No. 88205500 Type FKKF, year of construction 1988 Fodpfx Aaez Hlx Ho Iogh Drive motor 1 Crane runway 2: 10 tons Serial No. 2: Serial No. 88205510 Type FKKF, year of construction 1988 Drive motor 2 Addition Width: approx. 12.00 m Length: approx. 24.00 m Height: approx. 5.60 - 6.00 m Crane runway support provided for approx. 2.5 - 4 tons Equipment Supports: HEA 400, 14 pieces, 9.80 m, 17,150 kg incl. struts to truss, approx. 1.40 m Truss: IPE 400, 7 pieces, 10.70 m, 4,966 kg Gable wall supports Wall posts: IPE 140, 32 pieces, 6.00 m, 2,478 kg Pressure tubes roof: DN 80, 14 pieces, 6.00 m, 528 kg Gable wall supports Wind bracing in 3rd bay, 10 mm, 10 pieces, 6.23 m, approx. 23 kg Crane runway rails: 2 x 36 m 1 gable frame Supports: IPE 360, 3-4 pieces Pressure tubes: 90 mm, 11 pieces Corner supports: HEA 300, 3 pieces, 5.60 m The supports were cut off, 1 support was tapered, approx. 60 were embedded in concrete. Roofing: none Wall panels: none Windows: none Doors: none Gates: none Power cable crane runway: none Structural calculations / plans: none Lighting: none Crane runway drive, addition: none

Condition: excellent (used), Year of construction: 2017, Venti Oelde High-Performance Radial Fan Manufacturer: Venti Oelde Type: HRV 45-224 / R GL 360 Type: High-Performance Radial Fan V: 2559 m³/h 12 bar t: 300 °C p: 0.608 kg/m³ Fgedpfx Aaowxu Rne Ieh Pw: 0.9 kW nv: 2840 1/min Weight: 180 kg Year of manufacture: 2017 More items – new and used – can be found in our shop! International shipping costs available upon request!

Condition: new, Year of construction: 2022, functionality: fully functional, overall weight: 55 kg, input voltage: 400 V, type of input current: three-phase, input frequency: 50 Hz, NEW !!!industrial axial fan 910mm diam 29000m3/h Ziehl-Abegg FC091-ADS.7M.V7 /ct2311/ 3PCS IN STOCK Diameter 910mm 400V 29000m³/h 680/520 rpm Fgjdpfsxx U Tgex Aa Ieh manufacturer : Ziehl-Abegg FC0910-ADS.7M.V7 Power supply: 400V RoHS compliance: Yes Diameter (propeller or turbine): 910mm Flow rate (m³/h): 29000 Air pressure: 70-140pa Frequency: 50/60Hz Protection rating: IP.54 Current consumption (amperes): 3.6/2.3 Bearing mounted Curved aluminum blades 7pcs "replaceable" Noise level (decibel): 83 Power consumption (watts): 1250W/660W Airflow direction: Propeller towards the mounting points Air temperature range: -25°C to +60°C Connection type: Terminal box Speed ​​(rpm): 680/520 Weight: 55kg Overall dimensions: B1 = 337mm B2 = 20mm, D1 = 1005mm, D3 = 102

Condition: good (used), Year of construction: 2014, Warehouse offices, room-in-room system, approx. 39 m² – used: Price ex works: €5,950 (net), disassembled, packed and loaded! Item no. 9: Manufacturer: Kleusberg Type: Systemraum Trendline Fjdpezqzxtjfx Aa Iogh Year of manufacture: unknown, probably 2014 Walkable roof with a maximum load capacity of 100 kg Element width: approx. 1.03 m Length: approx. 9.30 m (9 elements) Depth approx.: 4.25 m (4 elements) Height: approx. 2.96 m 1x door All offices are closed on three sides and are therefore positioned with one side against the hall wall Includes lighting, etc., as available Without flooring Sale without furniture, etc. Condition: good Available: from approx. Q4/2026 Location: Hamburg

Year of construction: 2020, condition: used, functionality: fully functional, machine/vehicle number: 376292, The Reitz KXE 250-050030-00 is an industrial centrifugal fan designed to generate a high total pressure increase in process installations. The assembly consists of a volute fan casing, an impeller mounted on a separately supported shaft, a coupled electric motor, and a common steel base frame with vibration-isolating mounts. The KXE design is suitable for moving air and process gases in systems requiring high flow rates and pressure. This unit was manufactured in 2020 for a rated volume flow of 500 m³/min and a total pressure increase of 2500 daPa. At its operating point, it delivers 602.4 m³/min at 1862 daPa and 3033 rpm. The shaft is supported by two 6318 bearings lubricated with Shell Gadus S2 V100 2 grease. Manufacturer: Konrad Reitz Ventilatoren GmbH & Co. KG Type: KXE 250-050030-00 Product type: industrial centrifugal fan Serial number: 376292 Year of manufacture: 2020 Fgsdpfxozw Ucxo Aa Ijh Material number: 10466442 Measurement category: C Efficiency grade: N61 Target efficiency grade value: 64.5 Rated inlet temperature: 20°C Operating-point inlet temperature: 40°C Rated inlet medium density: 1.205 kg/m³ Operating-point inlet medium density: 0.93 kg/m³ Rated volume flow: 500 m³/min Operating-point volume flow: 602.4 m³/min Rated total-pressure increase: 2500 daPa Operating-point total-pressure increase: 1862 daPa Optimum efficiency: 76.3% Rated shaft power: 256.57 kW Operating-point shaft power: 231.1 kW Rated rotational speed: 2980 rpm Operating-point rotational speed: 3033 rpm Maximum rotational speed: 3159 rpm Maximum medium temperature: 80°C Drive-end bearing: 6318 Non-drive-end bearing: 6318 Lubricant: Shell Gadus S2 V100 2 Initial relubrication interval: 2460 operating hours Subsequent relubrication interval: every 2460 operating hours Grease quantity per bearing: 132 g Conformity marking: CE

Year of construction: 2020, condition: used, functionality: fully functional, machine/vehicle number: 376295, The Reitz KXE 250-050030-00 is an industrial centrifugal fan designed to generate a high total pressure increase in process installations. The assembly consists of a volute fan casing, an impeller mounted on a separately supported shaft, a coupled electric motor, and a common steel base frame with vibration-isolating mounts. The KXE design is suitable for moving air and process gases in systems requiring high flow rates and pressure. This unit was manufactured in 2020 for a rated volume flow of 500 m³/min and a total pressure increase of 2500 daPa. At its operating point, it delivers 602.4 m³/min at 1862 daPa and 3033 rpm. The shaft is supported by two 6318 bearings lubricated with Shell Gadus S2 V100 2 grease. Manufacturer: Konrad Reitz Ventilatoren GmbH & Co. KG Type: KXE 250-050030-00 Product type: industrial centrifugal fan Serial number: 376295 Year of manufacture: 2020 Material number: 10466442 Measurement category: C Efficiency grade: N61 Target efficiency grade value: 64.5 Rated inlet temperature: 20°C Operating-point inlet temperature: 40°C Rated inlet medium density: 1.205 kg/m³ Fgsdpozw Ug Rofx Aa Ieh Operating-point inlet medium density: 0.93 kg/m³ Rated volume flow: 500 m³/min Operating-point volume flow: 602.4 m³/min Rated total pressure increase: 2500 daPa Operating-point total pressure increase: 1862 daPa Optimum efficiency: 76.3% Rated shaft power: 256.57 kW Operating-point shaft power: 231.1 kW Rated rotational speed: 2980 rpm Operating-point rotational speed: 3033 rpm Maximum rotational speed: 3159 rpm Maximum medium temperature: 80°C Drive-end bearing: 6318 Non-drive-end bearing: 6318 Lubricant: Shell Gadus S2 V100 2 Initial relubrication interval: 2460 operating hours Subsequent relubrication interval: every 2460 operating hours Grease quantity per bearing: 132 g Conformity marking: CE

Condition: used, Used Machine Features and Technical Specifications: Motor rewrapped Fgodpfszy D Aaox Aa Ioh Motor: 5.5 kW / 2,860 rpm Feed opening: 300 mm Availability: Immediate Location: Röllbach

Condition: good (used), Year of construction: 2014, Warehouse offices, room-in-room system, approx. 19 m2 – used: Price ex-location: €2,950.00 (net), dismantled, packed, and loaded! Item 10: Manufacturer: Kleusberg Fjdpfszqzw Aex Aa Isgh Type: Systemraum Trendline Year of manufacture: unknown, presumably 2014 Walkable roof with a maximum load capacity of 100 kg Element width: approx. 1.03 m Length: approx. 5.24 m (5 elements) Depth approx.: 3.64 m (3 elements and 1 narrow element) Height: approx. 2.96 m 1 door All offices are enclosed on three sides and are therefore positioned with one side against the hall wall. Includes lighting, etc., as available. Without flooring. Sale without furniture, etc. Condition: good Available: from approx. Q4/2026 Location: Hamburg

Year of construction: 2010, condition: good (used), Güntner GVX 071V.1A/3-ED.E Axial fan condenser Fan: 500 mm diameter Number of fans: 3 Extra-quiet design Fgodpfx Aajpgrare Ijh Voltage: 400 V 3~ 50 Hz Year of manufacture: 2010 Max/Min pressure: 32 bar/-1 bar Max/Min temperature: -50 to +100 degrees Volume: 29 liters Rated power: 42 kW Air volume flow: 15000 m³/h Weight: 326 kg Overall dimensions, approx.: L: 410 cm, W: 110 cm, H: 125 cm Item condition: used You can find more condensers – new and used – in our shop! International shipping costs available upon request!