Used Gear Deburring Machine for sale (70,586)

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 630056, total width: 1,500 mm, overall weight: 5,200 kg, input voltage: 400 V, input frequency: 50 Hz, input current: 5 A, Equipment: documentation/manual, The ERNST Neptun EBB 1500 is a deburring machine for sheet metal processing, used to clean and round the edges of parts cut, punched, or burned with a laser. This machine enables the alternating processing of various materials, such as steel, aluminum, galvanized sheets, or materials coated with protective film, thanks to its flexible deburring roller and brush set. Main features of the ERNST Neptun EBB 1500: • Versatility: Processes parts made of different materials without the need for constant replacement of abrasive elements. • Functionality: Uses a flexible roller for deburring and a set of brushes (steel or lamellar) for dulling or rounding edges. • Precision: Allows for achieving identical and uniform radii on the edges. • Ideal solution for: Companies that process various materials where edge finishing is required after cutting. Pedpfx Aoz Spmtskierc Important information: The machine has different options. It can hold parts pneumatically or magnetically. Modules: E – Module with a deburring roller B – Stainless steel brush module – for dulling edges and removing oxides up to 6 mm B – Scotch/Vlies brush module – for rounding edges 0.1 – 0.4 mm and applying texture to the material surface. With this type of machine, material processing is done in a wet environment, so there is no need to retool or clean the machine, and it can work with various types of materials, such as aluminum, stainless steel, structural steel, etc., in continuous operation. The entire process takes place in a closed water system with the addition of a special emulsion, which ensures that neither the machine components nor the processed parts rust. From time to time, water needs to be replenished as it evaporates in the parts drying system and during filtration in a special filter within the machine.

Condition: excellent (used), The Gleason BGT 200 H-W universal bevel gear testing machine is used for roll-off, load capacity, and run-out testing, as well as for measuring backlash on the flank, installation dimensions, and sensitivity to displacement in bevel gears with and without axial offset and axial angles from 0° to 180°. Gear sets with a maximum ring gear diameter of up to D=190.5 mm and hypoid gear sets with a pinion offset of 31.75 mm above and below the center can be tested. This testing machine is ideally suited for testing gear sets with small diameters and small modules under low load and with a minimum of backlash. The digital actual value display facilitates quick and precise adjustment and reading of the pinion installation dimension, ring gear installation dimension, and axial offset. The motorized drive of the pinion spindle, in conjunction with the frequency converter, allows for stepless adjustment of the pinion speed in the range of 0 to 3,000 [rpm]. The work area is secured by an electrically interlocked safety device. Technical data Largest gear diameter 190.5 mm Largest axial offset (hypoid offset) above (+) and below (-) the center ± 31.75 mm Largest / smallest distance from the machine center to the spindle nose, ring gear 177.8 / 0 mm Largest / smallest distance from the machine center to the spindle nose, pinion 177.8 / 25.4 mm Smallest / largest axial angle (steplessly adjustable) 0 to 180 ° Pinion and gear spindle: Diameter at the large end 45.65 mm Taper 1 : 24 Length of the taper 76.20 mm Diameter of the spindle bore, throughout 33.33 mm Speed range of the pinion spindle (steplessly adjustable) 0 to 3,000 rpm Prodpfe Afi Atjx Akiec Weight 1,050 kg Dimensions L x W x H 500 x 1,100 x 2,000 mm

Condition: used, functionality: fully functional, For sale is an Oerlikon bevel/worm gear unit of the E 37 EX 2 series, serial number 828499L01.1. The unit comes from a fully functional installation and is suitable for test benches, special purpose machines, and industrial drive applications. Technical specifications (general): Manufacturer: Oerlikon Type: E 37 EX 2 Design: Bevel/worm gear unit Psdpsypb Iyofx Akiorc Application: Test bench technology, mechanical engineering, industrial drives Condition: used, functional

Condition: used, Year of construction: 2007, max. wheel diameter 500 mm Hypoid adjustment ±70 mm axial cross angle 90 ° Distance Y- 150 - 350 mm Distance Z-axis 120 - 340 mm turning speed range - stepless 0 - 5000 U/min max. torque on the spindle 57 Nm Cone 99,2 mm Pull-in force Tool clamping 23000 N Braking torque max. 93 Nm total connected load 20 kVA Psdpfxsukitxo Akisrc total power requirement 15 kW weight of the machine ca. 6 t dimensions of the machine ca. 2,35 x 2,24 x 2,5 m

Condition: used, Year of construction: 1983, max. wheel diameter 1500 mm gear width 550 mm max. module 25 min. module 2 workpiece weight max. 6000 kg max. number of teeth 432 min. number of teeth 12 table diameter 990 mm grinding wheel size 400 mm total power requirement 75 kW weight of the machine ca. 20,5 t With tailstock max. wheel dia. 1250mm, without tailstock 1500mm The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale Prsdpfxoyq Szae Akioc apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 1999, Technical details: max. wheel diameter: 280 mm max. module: 7 weight of the machine ca.: 13 t Psdpfx Aeyzxbcjkiorc table turning speeds: 100 U/min table diameter: 250 mm min. number of teeth: 4 hob turning speeds: 1500 U/min max. hob diameter: 160 cutter length max.: 230 mm Machine in good condition. Available 01.08.2024 *

Condition: used, Year of construction: 1986, machine/vehicle number: 275590, Ref. No. 25362 Technical Data: Psdpoyf Ehisfx Akijrc - Drilling capacity 25 mm - Drill spindle taper MK 3 - Drill spindle speeds 100 / 205 / 345 / 440 rpm 695 / 885 / 1450 / 2900 rpm - Drill spindle stroke 130 mm - Drill spindle reach 260 mm - Coordinate table with 3 T-slots 580 x 240 mm - Table travel X-axis: 415 mm Y-axis: 155 mm - Drive 400 V / 0.75 / 0.9 kW - Space required approx. W 900 x H 1800 x D 700 mm - Weight approx. 270 kg - Machine vice

Condition: excellent (used), Rolei PEF 500 deburring and bevelling machine, basic model in interated in table (1200 x 788 mm, width x depth) made of aluminum profiles Psdpfjgkwckjx Akierc

Condition: new, Year of construction: 2025, functionality: fully functional, working width: 800 mm, sheet thickness (max.): 120 mm, workpiece height (max.): 120 mm, grinding width: 800 mm, The grinding and deburring machine offers an efficient solution for processing laser- and plasma-cut parts. These high-quality machines ensure excellent processing by rounding the edges of the parts and removing burrs, resulting in a significantly improved surface quality. Prjdpfeulauvox Akijc Using the latest technology, our machines comply with all relevant CE directives and guarantee the highest safety standards. The user-friendliness combined with a robust design enables smooth integration into your production processes. With our grinding and deburring machine, you not only optimize processing times, but also increase the precision and durability of your products. Benefit from high-quality processing and increase your production efficiency.

Condition: good (used), Year of construction: 1980, functionality: fully functional, Gear-driven drill press, no belt changes required Very quiet and smooth operation - Drilling capacity in steel ST 60: 30 mm - Drill spindle mount: MK 3 Podpfx Akszuxxfjiorc - Drill spindle stroke: 160 mm - 9 drill spindle speeds: 90 - 1450 rpm - Overhang: 300 mm - Table with 2 T-slots - Table dimensions, swiveling: 500 x 450 mm - Table dimensions, base plate: 350 x 400 mm - Distance from base plate to spindle nose: 1100 mm - Max. distance table - drill spindle: 660 mm - Height adjustable via rack and pinion with hand crank - Column diameter: 120 mm - Drive: 380 V / 1.2 kW - Space requirement: approx. W 600 x H 2100 x D 670 mm - Weight: approx. 350 kg - Includes drill chuck

Year of construction: 2007, condition: ready for operation (used), A deburring machine with extraction is available. Passage width: 1000mm, sheet thickness: 20mm, minimum sheet size X/Y: 150mm/100mm, sound power level: 82dB(A), feed rate: 4m/min, dimensions X/Y/Z: approx. 2200mm/1500mm/1500mm, weight: approx. 1600kg, operating hours: 7152h. Including P. Ries 330 D Lissmac extraction unit, year of construction: 2007, filter area: 10m², air volume: 3300m³/h, negative pressure: 33mbar. Documentation available. Pedpstul N Dofx Akiorc

Condition: new, The ideal addition to your grinding/deburring machine (we also have the suitable deburring machine in stock!): Ulmatec Wet Separator Extracted materials: steel / stainless steel / aluminium, dry dust All water-contact parts made of stainless steel. Control via display. Prjdpex Diiaofx Akioc Motor: 7.5 kW, 400 V, 50 Hz, IE3 Max. airflow: approx. 11,000 m³/h Max. negative pressure: approx. 4,000 Pa Inlet diameter: Ø 355 mm Discharge: Drain valve Filling: Automatic via solenoid valve Included: HEPA post-filter (for stainless steel processing) ATEX version (e.g. for aluminium processing) Excluding piping Maximum distance between extraction unit and machine: 10 m Connection to the on-site supply network is to be carried out by the customer.

Condition: used, Year of construction: 2007, max. wheel diameter 400 mm workpiece dia. 36-300/400 mm axis distance 135-290 mm spindle turning speed - stepless 3000 1/min dist. between centers 100-550 mm Control Siemens 840D weight of the machine ca. 4000 kg dimensions of the machine ca. 2000x3055x2788 mm Test method: - Single flank rolling test - Double flank rolling test - Structure-borne noise test - Heli testing in two-flank contact. Features: - Use of up to 6 test slides - Highest testing accuracy and repeatability - Machine table with workpiece drive - Swiveling pneumatic unit - Spray oil lubrication (type: Vogel) Prjdpfxoy D T Suo Akiec - Oil mist extraction (type: Elbaron)

Condition: new, Year of construction: 2026, working width 630 mm workpiece width - max. 1,0 - 100 mm sandingbelt width 650 mm sandingbelt length 1900 mm dimensions 1320 x 2250 x 2200 mm weight of the machine ca. 2500 kg Predoz It Iropfx Akisc Description: - Universal, compact entry-level machine for machining steel, stainless steel, and aluminum - The continuously adjustable sanding belt speed allows you to reliably remove cutting burrs and achieve a smooth surface finish - With our flap-disc unit, you can achieve uniform edge rounding on all sides and a non-directional finish - The speed-controlled rounding unit enables different rounding depths and optimal processing for every application - 150 mm wide magnetic track

Condition: good (used), Year of construction: 1985, functionality: fully functional, 1 used Iseli surface grinding machine, model EBW-E. Predpjzz Rhlefx Akioc

Condition: as good as new (ex-display), Year of construction: 2026, Boschert brush deburring machine model K3 for deburring straight sheet edges and on the lateral aggragate suitable for cut-outs and notches up to 70 mm deep as well as outer radii on sheet metal. 3 motors á 1,5 kW brush diameter : 300 mm Material: wire brushes VA/steel Material range: 0.8-8 mm thickness Machine dimensions: Width: 1400 mm Prodpfx Akotr Avieijc Height: 580 mm Depth: 670 mm Underframe: 800 mm high (working height 920 mm) Table support: 200x1400 mm Hold-down device as sheet guide The sheet edge is deburred simultaneously from above and below as it passes by. If the burr is very thick, the motors can be synchronized so that both remove the thick burr from the top. The 3rd (lateral) unit is for deburring external contours and is switched on separately. A larger lateral table support serves as a shelf

Year of construction: 2012, condition: used, max. wheel diameter 180 mm gear width ca. 220 mm max. module 3 / 5 mm Control Siemens 840D sl max. radial velocity 5000 mm/min max. workpiece diameter 180 mm table rotation speed 800 U/min table diameter 145 mm axial travel 250 mm mm axial travel 300 mm clamping force max. 13 kN swivelable +/- 45 ° drive capacity 23 kW turning speeds 6000 U/min diameter of tools max. 90 mm tool clamping length max. 211 mm module hobbing max. 3 module profile milling max. 5 tangential speed max. 7500 mm/min weight of the machine ca. 9,5 t dimensions of the machine ca. 4,5 x 3,5 x 2,7 m Equipment / Accessories: - The machine is equipped for dry milling. - workpiece magazine Prodpfx Akeymf Dajiec - parallel gripper: - workpiece weight form-fit max. 15 kg - workpiece length max. 400 mm

Condition: new, Year of construction: 2025, Available from stock! Deburring and fine grinding machine with 3 workstations: Sanding belt - Brush station - Sanding belt Effective maximum working width: 1150 mm Standard workpiece thickness: 0.8 - 150 mm Digital workpiece thickness display on the control panel, accuracy 0.1 mm Adjustable pressure rollers before and after the workstations Sanding belt insertion on the left Sanding belt centering via electronically controlled photocell, emergency stop in case of skew or belt breakage Infinitely adjustable conveyor feed speed Includes the following options: Prjdpfx Akepwh Tfjiec Machine base prepared for forklift loading Extraction collector in galvanized sheet metal for machines with 3 work stations plus 1 external unit Vacuum device to increase the adhesion of small or slippery workpieces to the conveyor. With perforated feed table and carpet, as well as a powerful electric fan and sound-insulated exhaust according to CE standards, 5.5 kW 2x grit sets for electronic fine positioning of the contact rollers Adjustment and display (0.01 mm) on the control panel, standby position with pneumatic reset of the contact roller in the event of an emergency stop Frequency-controlled drive motors for sanding belt cutting speed, motor power per unit 11 kW Electronic adjustment of the brush unit HMI Vision - PLC control with visualization of the various machine settings via color touchscreen Storage capacity for up to 250 sanding programs

Condition: used, Year of construction: 2007, Used deburring machine FLADDER AUT-1000 VAC incl. vacuum pump and filter system Technical data: Year of manufacture: 2007 Manufacturer: FLADDER Model: AUT-1000 VAC incl. vacuum pump and filter system Currently equipped with: - new brush set - complete maintenance incl. replacement of all oils - vacuum pump inspected and serviced The machine is powered and can be inspected by appointment! Working width: 1000 mm Long infeed and outfeed Fully functional with extraction system Belt and vacuum table were replaced 3 years ago The machine has only been used for less than one shift No known defects Pjdpfx Aozy Uvkokisrc Connections: 3x 400V / 50Hz / 50 A

Condition: good (used), Year of construction: 1972, max. wheel diameter 80 mm gear width 60 mm max. module 3 Prsdpfx Akew N S D Sjisc min. module 0,1 total power requirement 0,4 kW weight of the machine ca. 120 kg dimensions of the machine ca. 0,6x0,6x0,75 m

Condition: as good as new (ex-display), functionality: fully functional, Timesavers Series 10 The Series 10 features a pivoting head and a side for quick abrasive wheel changes. We use this side to remove spatter and high burrs. The second side has a mount for a flap brush, which is used for edge rounding and finishing. Due to the various tool options, the Series 10 is a true all-rounder and is suitable for deburring, edge rounding, finish sanding, and removing heavy scale. The 180° rotatable head allows for quick and easy tool changes. The machine is equipped with a vacuum system, and the motor speed is continuously adjustable. Prjdpoznlyvjfx Akijc The machine is extremely flexible, comes with rollers for easy movement, and its simple operation makes it a user-friendly machine that is accessible to everyone.

Condition: ready for operation (used), Year of construction: 1991, functionality: fully functional, travel distance X-axis: 140 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 300 mm, workpiece length (max.): 400 mm, The design of the basic machine is characterized by the following features: - Horizontal arrangement of the workpiece spindle; vertical arrangement of the milling spindle or milling head - The workpiece is held between the workpiece spindle housing (left) and the tailstock (right) - The radial slide is mounted on the base (X-axis) - The axial slide moves on the radial slide (Z-axis) - The swivel milling head is equipped with an automatic angular adjustment (A-axis); the swivel slide (Y-axis) moves tangentially to the workpiece diameter TECHNICAL DETAILS Travel range, X-axis: 140 mm Travel range, Y-axis: 100 mm Travel range, Z-axis: 300 mm Tailstock travel, W-axis: 420 mm Swivel angle, end mill head, A-axis, left: 50° Swivel angle, end mill head, A-axis, right: 60° Largest module that can be milled with involute cutters according to DIN 8002: 4.5 mm Largest module that can be milled for high-performance milling: 3.0 mm Number of teeth: 2–999 Workpiece diameter with manual loading: max. 200 mm Workpiece diameter with automatic loading: max. 150 mm Workpiece length: max. 400 mm Milling spindle speed range, B-axis: 0–1,500 rpm Workpiece speed, C-axis: 0–350 rpm Milling tool data Milling tool diameter: 40–102 mm Milling tool length: max. 230 mm Radial front diameter (standard): 16–32 mm Milling coordinates Psdpfx Aszwmyiskisrc Z-axis: 100–400 mm X-axis: 130–150 mm Y-axis (face of milling spindle): 50–230 mm W-axis (face of tailstock spindle): 165–585 mm Feed rate, X-axis: 3,500 mm/min Feed rate, Z-axis: 3,500 mm/min Feed rate, Y-axis: 4,000 mm/min Feed rate, W-axis: 5,500 mm/min Feed rate, V-axis (portal loader): 80,000 mm/min EQUIPMENT IBH control system Loading device A wide range of accessories

Condition: good (used), Year of construction: 1991, machine/vehicle number: B II 17-5680, Offer 26901 Technical data: Pjdpfx Ajzrvxwekierc - Brush diameter: 250 mm - Brush width: 60 mm - Disc speed: 1500 / 3000 rpm - Drive: 400 V / 2.2 / 3.0 kW - Brush depth adjustment - Adjustable height support table - Working height: 900 mm - Space requirement: approx. W 720 x H 1150 x D 450 mm - Weight: approx. 180 kg

Condition: used, Year of construction: 1963, Technical details: max. wheel diameter: 900 mm max. module: 10 weight of the machine ca.: 8200 kos. hob dia. - max.: 190 mm cutter length max.: 320 mm milling spindle speeds (infinitely variable): 13-80 U/min workpiece length - max.: 750 mm Prjdpfx Ajvkpu Hekiec max. workpiece diameter: 150 mm Counter holder milling mandrel is missing *

Condition: excellent (used), Year of construction: 1991, max. wheel diameter 10 - 330 mm gear width 180 mm max. module 7 min. module 0,5 clamping length 420 mm Psdpfozd Hgisx Akiorc number of teeth 10 - 600 max.helical angle +/- 45 ° turning speeds 1100 - 1900 U/min grinding wheel diameter 280 - 350 mm grinding wheel width 84 - 104 weight of the machine ca. 5,1 t dimensions of the machine ca. 4,5 x 6,0 x 2,3 m