Used Gbs 250 Super Autocut for sale (20,794)

Condition: used, Round cylinder, pneumatic cylinder, standard cylinder, air cylinder, pneumatic stamp, air stamp -Stroke: 250 mm -Piston diameter: 40 mm -Piston rod: 16 mm Gisdpfx Ajfbg Rhodmsl -Price: per piece -Number: 2 pieces -Dimension: Ø 45 x 433 mm -Weight: 1.3 kg/piece

Condition: reconditioned (used), functionality: fully functional, Rühle frozen meat cutter Model GFR 450 / 250 5.5 kW Cross cutters: 4 units Giedpfx Adjxpickjmel

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 1998-3-45, technically efficient, ready to work - after full service engine: 3 kW/400V cutter diameter: 250 mm milling width: 305 mm cooling and lubrication installation Gisdpfx Adowhpnyemel material bumper rotated in both directions up to 20° vertical and horizontal pneumatic profile clamping pressure reducer

Condition: excellent (used), Chain hoists - DEMAG / STAHL - LIFTKET - 14 units: 1. Demag DKUN 10 - 2000 kg. 2. Demag PK 10 - 1000 kg. Gedpfsvv Idwjx Admjil 3. Demag DKUN 5 - 500 kg. 4. Demag D-BE - 160 kg. 5. Demag PK 2 F - 500 kg. 6. Demag PK 2 N-F - 250 kg. 7. Demag PK 1 N - 125 kg. 8. Demag DKUN 2 - 250 kg. 9. Demag PK 2 N - 500 kg. 10. Demag PKVUN 1 - 125 kg. 11. Demag PKUN 1 Motor - 125 / 250 kg. 12. Steel T 405 M - 1000 kg. 13. Steel T 302 S - 500 kg. 14. Liftket Star 021/51 - 500 kg.

Condition: used, Brush deburring machine, tube deburring machine ERINI type 250 Year of construction approx. 1995 Brush diameter 250 mm Brush width 25 - 60 mm Speed 1500 / 3000 rpm Power 2,2 / 2,8 kW Mains connection 380 Volt, 50 Hz - Material support - New deburring brush Gsdpfxjpu R Ngo Admsil - Suction connection Ø 100 mm Space requirement L x W x H 620 x 500 x 1150 mm Weight 100 kg good condition

Condition: new, The ZSH chipper series is specially designed for forestry, horticultural and municipal operations. Mainly these chippers are used for volume reduction of tree and shrub cuttings as well as smaller trunk diameters. The wood chips produced are suitable for combustion in wood chip heating systems with screw conveyors or also as a preliminary stage in pellet production. The machines are robust, reliable, easy to operate, powerful and produce wood chips of consistent quality and size. Gedoghgi Eepfx Admeil Other Low-cost solution for the production of wood chips l Compact design l User-friendly l Low energy consumption

Condition: used, Pneumatic cylinder, standard cylinder, air cylinder, pneumatic stamp, air stamp -Stroke: 250 mm Giodpfx Adsdkx S Tsmel -Piston: Ø 50 mm -Piston rod: Ø 20 mm -Dimensions: 63/63/H435 mm -Weight: 3.15 kg

Condition: refurbished (used), Year of construction: 2025, Progressive Header Machine SACMA SP.250 4 Dies - Currently being overhauled. Available upon request from HBR srl. The machine will be completely overhauled. Square wedges. Available with the soundproof cabin, Brankamp, ​​and the conveyor belt. New electrical system with inverter and PLC acc. to Ce Standards. Technical information: Number of dies: 4 Heading tonnage: 650 KN Maximum cutoff diam 500N/mm²: 10,5 mm. Max. cutoff length: 85 mm. Kickout stroke die max.: 65 mm. Kickout stroke punch max.: 20 mm. Speed pcs. per minute: 275 Power of main motor: 30 KW Diam. die: 54 mm. Length die: 90 mm. Diam. punche fixed: 45 mm. Length. punche fixed: 100 mm. Net weight: 11.000 kg. Giedpfx Asxrdmiodmol Gross weight: 12.600 kg. We look forward to seeing you at HBR srl in Calolziocorte (LC).

Year of construction: 2004, condition: good (used), machine/vehicle number: 2004-3-11A, - Manual feed of the milling unit - Work table height adjustable via hand wheel - horizontal and vertical material tension - Cutter diameter up to 250 mm - max milling height 150 mm - max milling depth 80 mm Gjdpfx Adjf E Higomjil - max milling length 305 mm - angle adjustable stop Li + Re 20 - 90 ° - milling spindle speed 4500 rpm - Drive 400 V 3.2 kW - Compressed air supply 6 - 8 bar - Air consumption per working cycle 10 l - Pneumatic profile clamping - Table underframe - Space requirement approx. W 1100 x H 1300 x D 700 mm - Weight approx. 200 kg

Condition: used, functionality: fully functional, overall weight: 20 kg, -KOM 3124- Offered here is a used Brinkmann submersible pump, model TA 302/250. The pump can be mounted directly on a tank. Dimensions: approx. (550 mm x 180 mm x 210 mm) Submersible depth: 250 mm Weight: approx. 20 kg Voltage: 230/400 V Gijdowl U Aqopfx Admsl Frequency: 50 Hz Current: 4.3 / 2.5 A Speed: 2850 rpm

Condition: ready for operation (used), functionality: fully functional, Technical data of the press: Name: Eccentric Press SCHULER Model: PD 63 Press force: 63 t Overall dimensions (L x W x H): 1800 x 1300 x 2500 mm Weight: approx. 4500 kg Table dimensions (L x W): 700 x 550 mm Table opening (L x W): 265 x 265 mm Ram dimensions (L x W): 320 x 300 mm Ram stroke: 135 mm (fixed) Maximum distance between ram and table: 400 mm PLC components: SIEMENS SIMATIC S7-300 Pneumatic components: FESTO Godpfx Ajw R Tl Todmsil Controls: single (foot pedal, two-hand lever), continuous (automatic mode - adjustable time interval 1–99,999 s and repetition count 1–32,000) Special function for setting the lower ram position Automatic machine lubrication Pneumatic actuation and braking Note: Two identical presses are available (difference only in display size: 7" and 4.3"). If both presses are purchased, the total price is €11,500. Technical documentation is not available. Online PLC programming support is possible. Shipping costs are extra. Urgent sale due to the need for space for new equipment.

Condition: used, mileage: 525,000 km, power: 162 kW (220.26 HP), first registration: 04/2018, fuel type: diesel, overall weight: 11,990 kg, axle configuration: 2 axles, color: white, gearing type: automatic, emission class: euro6, loading space length: 7,100 mm, loading space width: 2,480 mm, loading space height: 2,530 mm, Equipment: ABS, parking heater, soot filter, tail-lift, MAN TGL 12.220 BL 4x2. With box body certified to ISO, box heater, and Dautel tail lift with 1,500 kg capacity. Dimensions: 7.10 x 2.48 x 2.53 m. Wheelbase approx. 4.80 m. Features: Lane departure warning, spoiler, large radio, rear air suspension, cruise control, engine brake, roof hatch, comfort seat, ABS, armrests, immobilizer, RIO telematics, AdBlue, cross member for trailer hitch with air and electric connections, 2 load securing rails, LED lighting in the box body. Gedpfjw Hiqljx Admoil =====German registration, 1 previous owner===== ====We buy commercial vehicles daily, trade-in possible====

Condition: used, Clamping angles, clamping angles, tombstones, clamping devices, mechanical clamping elements Giododl U Ngspfx Admjl -Clamping angle: for workpiece clamping -Dimensions: 165/250/H127 mm -Wall thickness: 20 mm -Number: 1x angle available -Price: per piece -Weight: 12.4 kg/piece

Condition: good (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: K500-50739, total length: 14,000 mm, total height: 2,500 mm, total width: 3,600 mm, type of input current: three-phase, product height (max.): 100 mm, product height (min.): 30 mm, product length (min.): 500 mm, product length (max.): 1,800 mm, product width (max.): 1,500 mm, product width (min.): 600 mm, input voltage: 400 V, compressed air connection: 6 bar, input current: 33 A, working height: 900 mm, table width: 1,700 mm, table length: 2,000 mm, passage height: 250 mm, year of last overhaul: 2022, workpiece weight (max.): 100 kg, Equipment: documentation/manual, Dimensions of the entire machine: Width: 3,600 mm Length: 10,600 mm (without feed and deposit areas) Height: = 2,500 mm Working height: 900 + 50 mm Feed rate: 13 - 23 m/min (frequency-controlled) Properties of the PE shrink flat film • Shrink film suitable for the shrink sealing process. (Top and bottom films must be laterally sealable in the tunnel). • Biaxial shrinkage value of approximately 50-60% lengthwise, approximately 40-50% crosswise • Antistatic treatment. • Shrink film with needle perforation. Improves the shrinking process and has higher gas and water vapor permeability. Gedpfxevvlyie Admoil Shrink film to be used • Biaxially shrinking, needle perforated. • Spooled on rolls, sound-tight and with straight edges. Foil thickness: Application: approx. 40 - 60 μm. Film widths: Application: 800 mm, 1100 mm, 2000 mm Roll outer diameter: max. 350 mm Core outer diameter: min. 90 mm Bottom film calculation: Package width + 200-250 mm Top film calculation: Package width + (2 x height) + 200-250 mm Technical component data: Conveyor belts: Infeed conveyor (W x L) 1,700 x 2,000 mm / Feed speed 13-23 m/min. Roller conveyor behind the tunnel (W x L) 1,700 x 2,000 mm / Feed speed 13-23 m/min. KFE standard film wrapping machine: Max. film roll width, top and bottom: 2,100 mm / Package height (passage height): max. 250 mm / max. Film roll diameter: 350 mm Film thickness: approx. 40-60 µm high-quality PE film / Weight: approx. 3,100 kg Side sealing: Sealing bar length: 1,850 mm / Adjustment range: 500 - 1,600 mm / Adjustable feed rate: 13 - 23 m/min. Shrink tunnel ST / lI -1800 -3000 -300: Clear hood opening: 1,860 mm wide / 300 mm high / Hood length: 3,000 mm / Transport length: 3,560 mm Adjustable feed rate: 6 - 23 m/min. The machine can be inspected at the production site.

Operating hours: 13,800 h, condition: like new (used), functionality: fully functional, ### nNewest automatic horizontal packaging machine Brand: nNewest Product category: Packaging machines Description: The nNewest Automatic Horizontal Packaging Machine is the ideal solution for your packaging needs. With advanced technology and high efficiency, this machine ensures precise and fast packaging processes. Model: NT-250 Technical Specifications: - Voltage: AC 220/50 - Film width: Max. 250mm Giodpfxetxl Dwo Admel - Power: 2.4KW - Bag length: 65~190mm or 120~280mm - Bag width: 30~110mm - Product height: Max. 40mm - Film diameter: Max. 320mm - Packaging speed: 60~120 bags/min - Machine size: 3770 x 670 x 1450mm - Weight: 480kg Location and collection: - Pickup possible in 14547 Beelitz - Shipping possible for additional shipping costs For further information, please send us an e-mail or contact us via WhatsApp.

Condition: new, empty load weight: 360 kg, maximum load weight: 1,640 kg, overall weight: 2,000 kg, axle configuration: 2 axles, loading space length: 2,545 mm, loading space width: 1,510 mm, loading space height: 400 mm, total length: 1,640 mm, total width: 1,110 mm, total height: 3,810 mm, suspension: steel, tire size: 165R13C 96/94N, construction height: 1,110 mm, Multi-purpose trailer prepared for transporting various types of material. Wheels under the transport surface The transport surface is wider and set higher than in other luggage trailer series, making manual loading and unloading easier. All side walls are removable, so the load can be loaded freely, e.g. with a forklift truck. Underframe made of structural steel, closed profile, bolted. Floor made of high-quality, waterproof and non-slip plywood. Possibility of attaching high welded steel mesh walls. | HIGH LOADER + 250/2 2T | Steel frame | Dimensions of loading area: L: 2.54m W: 1.51m Height of side wall: 0.40m | 8 lashing rings (4 left, 4 right) recessed in the floor | Knott axle with drum brake | Leaf spring suspension | Operating voltage 12V | Spindle parking brake | Front railing | Spare wheel on front wall | Errors, input and advance sales reserved. Gijdeu R D Skjpfx Admel

Condition: excellent (used), IM Very good condition. Gsdpfxoxclluo Admoil

Condition: good (used), Year of construction: 1994, cutting height (max.): 250 mm, saw blade diameter: 400 mm, cutting width (max.): 500 mm, chain width: 540 mm, working height: 250 mm, power: 0.09 kW (0.12 HP), DOUBLE SHAFT CIRCULAR SAW COSTA MOD. LEONE 2/250 2X90 MKW HIGH MM 250 Gjdpjq E U Ixsfx Admeil

Condition: used, Clamping plate, milling support, plate field, welding table, welding table, plate boring mill, clamping angle, clamping cube, clamping devices, clamping supports, clamping tool, clamping box, clamping tower -Clamping block made of: cast -Execution: stable Gsdpfx Asd Dfhuedmsil -Clamping block for: workpiece clamping or material underlay -Width: 150 mm -Length: 250 mm -Height: 105 mm -Number: 3x milling support available -Price: complete -Weight: 48 kg

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, plate width: 250 mm, Equipment: documentation/manual, DMR Seri-Roll (rotary screen printing press for labels) Year: 10/1999 Type: 250/2C Width: 250 mm Maximum unwinder diameter: 700 mm 1 screen printing unit + UV Gisdpfx Adjxdi N Hsmsl 1 hot-foil stamping unit 1 flatbed die-cutting unit 1 rewinding unit 1 sheet cutting station Available: September 2025 Condition: Good Availability: Immediate (subject to prior sale)

Condition: excellent (used), Type AKF 6/250 Motor 400 V / 3.0 kW Speed 4500 rpm Cutter Ø 250 mm Cutter holder shaft Ø 40 mm Milling width 305 mm Milling depth 80 mm Gedpsuf E R Isfx Admjil Suction nozzle 80 mm Weight 210 kg

Condition: excellent (used), GRAULE AKF 5/250 Godpfx Aol Sklrjdmoil EU shipping ~300euro

Condition: ready for operation (used), STAYER SC/250 cap saw, mitre saw Specifications: * blade diameter - max 250 mm * motor power - approx. 1.0 kW * engine speed - 3,600 rpm * spindle - 30 mm * cutting adjustment +/- 45 degrees * max cutting cross-section - 70x100 mm * weight - about 40 kg * overall dimensions 80 x 45 x 40 cm ( W x D x H ). Additional information: * factory technical and visual condition. * presented photos illustrate the actual state of the object of sale * possibility of switching on and checking the device on site Gijdpfxouf Nyte Admel * the price given in the auction does not include VAT

Condition: new, Year of construction: 2024, Our new generation Double Shaft Multi Slitting Machine CML/2/250 has entered the service of our sector... Self-adjusting feed speed according to the cutting height... Ability to install saws of different diameters thanks to the up-and-down movable saw shaft Automatic positioning according to cutting height Adjustable cutting height from 20 mm to 250 mm ----- Our new generation Double Spindle Multiripsaw Machine CML/2/250 has entered the service of our industry... Self-adjusting feed rate according to cutting height... Ability to mount saws of different diameters thanks to the up-down movable saw spindle Automatic positioning possibility according to cutting height Adjustable cutting height from 20 mm to 250 mm Giodpfxsttlame Admsl

Condition: as good as new (ex-display), End Milling Machine Giedpfxorcfumo Admol