Used Gbs 250 Super Autocut for sale (20,794)

Condition: used, Year of construction: 2014, The portal hydraulic press is designed for bending or straightening and finished welded elements as well as for dismantling mining and other machine assemblies. It is used in mechanical, production, repair plants, etc. Manufacturer: PATENTUS S.A. Type: PAT 300-2/250-2 Year of production: 2017 Technical parameters: Dimensions: width: 4200x3140 mm, height: 3600 mm Weight: 25000 kg Table surface: 4200 mm x 2140 mm Diameter of the cylinders of the gate 1: 2 x 300 mm Diameter of the cylinders of the gate 2: 2 x 250 mm Pressure of the cylinders of the gate 1: 2 x 1768 kN Pressure of the cylinders of the gate 2: 2 x 1228 kN Clearance max. 1240 mm Working cylinder stroke: 600-660 mm Gijdpfxjhktq Aj Admsl Gate travel: 1420 mm Equipment: - two gates - table - working cylinders x 4 - gate travel cylinder - working cylinder travel cylinder - power unit with pump T-100/30 (2006 with renovation in 2011) Technical condition: used, for inspection

Condition: used, Year of construction: 1995, functionality: fully functional, We will be selling our finger jointing line at the end of 2025/beginning of 2026, starting from the vacuum destacker (photo 1) up to the finger joint press including the cross-cut saw (photo 11), with only the defect cross-cut saw not for sale. Finger jointing line, model HK 250 L, year 1995 (see photo 7), with upgrades in 2013: control system and finger joint press were replaced. Glue application is performed using the bottom-mixing method with glue rollers (see photo 6). Godsw Uf Tkepfx Admsil The control system for the entire line and the press was renewed by Somako. Production with this line will continue until the end of 2025, therefore it can be inspected in operation at any time. The price depends on whether the entire line or only parts of it are purchased. Individual components can also be sold as spare parts.

Condition: new, Year of construction: 2025, machine/vehicle number: EAN0729389556525, total length: 253,000 mm, load per truss pair (max.): 2,000 kg, number of shelf rows: 10, frame height: 7,500 mm, shelf length: 25,300 mm, support length: 2,700 mm, 10 rows of pallet racks (10 x M75112711-4) each 25.3 m long, 7.5 m high, 1.1 m deep, each with 9 bays, 2.7 m wide, Gisdpjv Uqwdefx Admjl each with 4 beam levels, shelf load 2000 kg. - 100 frames (RM7511 - RAL5019) - 200 base plates, shims, and screws - 400 ground anchors (ZZBA1210) - 720 single crossbeams (T27114 - RAL2008) - 2 collision protection / impact protection (ZRS40901) - 4 flank protection (ZFL4090D) - 120 spacers / connectors for double rows (ZAbh20) - 10 load plates (BSMcP) Frames bolted, not pre-assembled Freight / Delivery: - max. 20 working days after receipt of payment - ex works site / installation location - Unloading from the truck is carried out by the buyer using their own lifting equipment - Deliveries are made throughout the Federal Republic of Germany; except islands! Deliveries to EU countries are subject to individual agreement.

Condition: new, Year of construction: 2026, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE Fabo tracked jaw crusher FTJ 11-60 is a complete mobile system which moves on hydraulically driven tracked system with 1 km/h speeds and combination of a vibrating grizzly feeder, 1000 x 600 mm jaw crusher, foldable stockpile conveyors, control unit and electric generator. In today's conditions and technological processes, businesses are beginning to think about how to make their field of activity more efficient. As they make it more efficient, they always take into consideration factors such as the operationally of the machines they use, their low cost and staffing needs. Our Tracked Crushers can crush with high performance even on the most demanding mine sites with its specially designed body and compact structure. Customization can be done to our tracked systems by Jaw Crusher, Primary and Secondary Impact or Cone Crusher. All necessary equipment for the process is combined only single chassis and processing equipment is driven by electrical motors. Overall production capacity is 100-250 tph. Advantages of Tracked Crushers; -Heavy-duty walking tracks can reach places where ordinary machines cannot reach. -It has the appropriate dimensions and sound level to crush construction waste in the city. -The fuel consumption of the generator and walking track units are very economical. -System maintenance and management is very easy with latest technology control software. Gjdpfjwbp Ersx Admsil TECHNICAL SPECIFICATIONS: -Model: FTJ 11-60 -Production Capacity: 100 – 250 tons per hour -Maximum Feeding: 550 mm -Crusher Type: Jaw Crusher -SIZE: 1000x600 mm -Generator: 275 kva -CSS Setting: 40 – 150 mm -Weight: 40 tons – Low investment and operation cost – Zero substructure preparation – Easiness at usage and maintenance – Easy assembly and disassembly advantages. FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: good (used), Year of construction: 2001, spindle speed (min.): 2,500 rpm, Model Year: 2001 Chuck Diameter: 10" Number of Axes: 2 Length: 650 mm Gijdpfx Adox N A Dwjmel Swing Diameter: 650 mm Spindle Speed (RPM): 2500 Machinable Materials: Steel, Aluminum, Titanium, Graphite, Copper, Invar, Composite, Delrin, PEEK

Condition: excellent (used), two speed with switch Gsdpfx Aow A Rklsdmeil belt gear motor power 0,8kW clamp connection 380V

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: MC-100, turning length: 350 mm, turning diameter over cross slide: 380 mm, turning diameter: 350 mm, spindle motor power: 12,000 W, spindle speed (min.): 50 rpm, spindle speed (max.): 4,000 rpm, spindle bore: 50 mm, Hard Turning Lathe High precision accuracy 0.0001mm Hydrostatic technology Spindle runout 0.15μm Gedevl S Dyepfx Admoil X/Z axis positioning accuracy 1μm X/Z axis repeated positioning accuracy 0.2μm System resolution 0.01μm Quality Guaranteed

Condition: excellent (used), Year of construction: 2006, Metal cutting Tooling KITAGAWA - 250 Horizontal: Yes Vertical: Yes Diameter: 230mm Tailstock: 3Mk indexing: 360.000° Gjdpfxsx Tpzks Admoil Centre height:180mm Control system:MAZATROL 640 M Length: 500mm Width: 400mm Height: 300mm Weight: 50kg

Condition: good (used), mileage: 410,374 km, power: 188 kW (255.61 HP), first registration: 06/2009, fuel type: diesel, axle configuration: 6x2, wheelbase: 6,200 mm, fuel: diesel, brakes: engine braking, driver cabin: day cab, gearing type: automatic, emission class: euro5, total length: 9,000 mm, total width: 2,500 mm, Year of construction: 2009, Equipment: central locking, crane, cruise control, electric window regulation, power mirror, trailer coupling, = Additional Options and Accessories = - Aluminium fuel tank - Heated mirrors - Power brake booster - Cab - Air-suspended seats - Reversing camera - Side skirts - Sun visor - Toolbox - Power take-off (PTO) - Power take-off (PTO) - Central lubrication - Towing hitch = Further Information = Technical Information Number of cylinders: 6 Engine displacement: 9,186 cc Transmission Gearbox: Allison, automatic Axle Configuration Front axle: Max. axle load: 9,000 kg; Tire tread left: 50%; Tire tread right: 50% Giedsx D Axzjpfx Admsl Rear axle 1: Max. axle load: 11,500 kg; Tire tread left: 50%; Tire tread right: 50% Rear axle 2: Max. axle load: 7,500 kg; Steering; Tire tread left: 50%; Tire tread right: 50% Weights Unladen weight: 15,000 kg Payload: 13,000 kg GVW: 28,000 kg Functional Crane: Fassi 195 RADIO REMOTE, year of manufacture: 2009, mounted behind the cab Pump: Yes Condition Technical condition: good Visual condition: good Further information Please contact John de Koning or Mark de Koning for further information.

Condition: used, Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Clamping angle: for workpiece clamping -Table surface: 535x250 mm, height 400 mm Gisdpsxugx Hsfx Admjl -Wall thickness: 36 mm -T slots: slot width 18 mm -Dimensions: see photos / technical drawing -Dimensions: 535/250/H400 mm -Weight: 97 kg

Condition: used, Year of construction: 1971, Pressure 063 t throat 250 mm stroke 16 - 90 mm no. of strokes 60 /min Gijdevut T Uspfx Admel distance table/ram, max. stroke up, adjustment up 350 mm table surface area 730 x 500 mm hole in the table 180 x 180 mm table height over floor 710 mm ram surface 350 x 220 mm ram adjustment 50 mm dimensions (WxDxH) 1,3 x 2,2 x 2,4 m permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV) with motor, pneumatic clutch (Ortlinghaus), manual stroke adjustment, manual ram adjustment, fix table as is where is, WITHOUT putting into operation

Condition: excellent (used), Year of construction: 2016, Seydelmann AMR1800/250 mixer grinder with CO2. 1800 litre hopper with 250mm head. Excellent condition, very high specification machine. New cost in excess of EUR 300,000 Gijdpfx Adox Alr Iemsl We also have many other (22) Seydelmann machines from the same factory, all bought at the same time. Please ask for details.

Condition: like new (used), Year of construction: 2002, functionality: fully functional, Equipment: documentation/manual, rotational speed infinitely variable, Dufour milling machine, type 250, with Acu-Rite digital readout. Complete – includes vise, tooling, and dividing head. In excellent, very clean condition. Rebuilt in 2002. Giedox Iv Dzspfx Admjl

Condition: used, Milling cutter diameter 250 mm Max. Frästiefe: 80 mm Milling width: 330 mm Pneumatic workpiece clamps Manual feed Weight: approx. 160 kg Godpfx Adjx Rbz Djmoil

Condition: good (used), Year of construction: 2017, Dickow Pumpen NMR b h 32 / 250 Gijdsx S Nw Nspfx Admel 2 units available In good condition

Condition: good (used), Pneumatic cylinders, air cylinders, standard cylinders -Stroke travel: 250 mm -Piston diameter: mm Giedpfx Aocp H S Nsdmjl -Piston rod: 20 mm -Air inlet and outlet: adjustable -Quantity: 2 pieces available -Price: per piece -Dimensions: 560/182/H160 mm -Weight: 9.5 kg/piece

Condition: used, Year of construction: 1988, Pressure 063 t throat 250 mm stroke 10 - 100 mm no. of strokes 120 /min distance table/ram, max. stroke up, adjustment up 380 mm table surface area 700 x 500 mm Gisdpfx Adovuk Enomol hole in the table 180 x 140 mm table height over floor 700 mm ram surface 360 x 275 mm ram adjustment 60 mm power requirement 5,5 kW weight 3,8 t Dimensions (WxDxH) 1,9 x 1,7 x 2,4 m permitted for manual loading according to the German Safety Regulations (UVV) with hydraulic clutch/brake combination, mechanical overload protection in ram, manual stroke adjustment, manual ram adjustment, fix table, manual central lubrication, two-hand and foot operation can be inspected in running condition in our warehouse

Condition: excellent (used), functionality: fully functional, Manufacturer: MURARO Gedpfsx R U R Eox Admjil Model: ID500/250 Year: 2001 Condition: Used Stock number: Code 0114 Maximum upper slide pressure: 500 tons Slide stroke: 900 mm Maximum daylight: 1,500 mm Table size: 2,700 x 1,600 mm Slide dimensions: 2,700 x 1,600 mm Blank holder table size: 2,450 x 1,250 mm Approach speed of slide: 650 mm/sec Blank holder cushion – total force: 250 tons Lower blank holder stroke: 400 mm Overall press height from floor: 5,600 mm

Condition: used, Year of construction: 1984, incl. Eumacop feed, table size: 1100 x 760 mm, table height: 870 mm, speeds: 3000/4500/6000/9000 rpm, height adjustment: 120 mm, weight: approx. 700 kg Gedpfx Asw E E Epjdmeil Storage location: Nattheim

Condition: ready for operation (used), Schmalenberger DMG 2 3208/2 50/60HZ centrifugal pump, terminal board cover missing see photo, serial number according to photo, used, normal signs of use, 100% functional, scope of delivery as per photos Giedpfji D Nu Ajx Admel

Condition: good (used), Granule dryer, granulate drying plant, granulate conveyor, vacuum conveyor -Manufacturer: Digicolor, granulate conveyor vacuum conveyor -Type: unfortunately without type designation -Housing: Material VA -Individual components/dimensions: see photos -Dimensions total: 260/250/H830 mm -Weight: 13.6 kg Gijdpfjwuppkex Admol

Condition: used, Year of construction: 1988, pressure 400 t distance between columns 1100 mm stroke 250 mm no. of strokes 25 - 75 /min distance table/ram, max. stroke up, adjustment up 900 mm table surface area 1100 x 965 mm capacity of ejector in table 30 t ejector stroke of ejector in table 80 mm capacity of ejector in ram 3 t stroke of ejector in ram 60 / 70 mm ram surface 980 x 800 mm column travel -side 800 mm ram adjustment 20 mm Gisdpfevuuknex Admjl power capacity 80,0 + 5,5 kW weight 47,0 t Dimensions (WxDxH) 3,5 x 3,3 x 6,0 m weight of switch cabinet 1,4 t dimensions of electrical cabinet (WxDxH) 4,9 x 0,5 x 2,6 m Multi-station cold extrusion press with link drive with infinitely variable drive, hydraulic clutch-brake combination (Ortlinghaus), hydraulic overload protection in the slide, motorised slide adjustment, pneumatic counterbalance cylinder in press frame, cam-controlled ejector in table (30 t / 80 mm), pneumatic ejector in slide (3 t, 60 mm), motorised central lubrication can be offered without putting into operation or alternatively with new control Siemens S 7-1500 F

Condition: good (used), T-slot plate, measuring plate, measuring table, clamping plate with T-slots, plate field, welding table, welding table Giedpfx Ajcbqqxedmol -Dimensions: 250/1450/H170 mm -Sheet thickness: 28 mm -Plate is: with supporting ribs -1x T-slot: 12 mm -1x: Longitudinal groove -Weight: 156 kg

Condition: used, Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Clamping angle: for workpiece clamping -Table surface: 535x250 mm, height 400 mm -Wall thickness: 39 mm Giedoxunupspfx Admol -T slots: slot width 18 mm Dimensions: see photos / technical drawing -Dimensions: 535/250/H400 mm -Weight: 100 kg

Condition: good (used), Fixators, leveling units, leveling elements, machine base, machine feet, leveling shoes, machine foundation, leveling shoe, wedge shoe, machine support, leveling foot, spring elements -Spring elements: Machine feet 4 pieces for machine tools and systems -Support surface: 300 x 250 mm -Height: 35 mm Giedpfx Adjwvficjmsl -Price: complete -Dimensions each: 300/250/H35 mm -Weight 13.3 kg/piece