Used Gbh 10 for sale (30,108)

Condition: excellent (used), Loos steam boiler 2500 kW, 10 bar. (5082) Oil or gas burner available on request. Bedpfx Aexqr Dmefmjww

Condition: new, Year of construction: 2026, functionality: fully functional, load capacity: 10,000 kg, pivoting range: 360 °, Column lift swivel device, 10-ton lifting capacity, available as a set or individually. Driven on 2 sides. The machine is offered as a synchronized set or individually. Protec swivel device / positioner Syncrolift. Double column, hand-held remote control, wireless and manual. Column adjustment 2 times (electrically adjustable for an additional charge). Bwjdpoxq S Rgsfx Afmow Lifting capacity: 10,000 kg, 360°. Minimum working height: 800 mm. Maximum working height: 1700 mm. Speed: 0.5 RPM. Clamping plate diameter: 900 mm. Swivel movement: 2 x 2.2 kW. Torque: 18950 Nm. The machine is also offered individually as a mono model (more economical). Optional, with a universal joint flange (cardan flange).

Condition: used, No. 04491 Mobile extraction unit / Mobile dust extractor ESTA Dustomat HMS 10 WN Used For extracting wood dust and chips Filter type H2 for wood dust, residual dust content level 2, 0.2 mg/m3 Type 1, for extracting combustible dusts of dust explosion classes St 1 and St 2 400 V, 1.1 kW, with power cable and plug Nominal air volume flow 720 m3/h Filter area 3.5 m2 Extraction pipe connection diameter 100 mm Filter cleaning by hand crank Chip container 670 x 460 mm Mobile unit CE-compliant Transport dimensions approx. 1300 x 550 x 1700 mm LWH Weight approx. 100 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Bwjdpfsxnqauox Afmjw Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Condition: used, sheet width 1050 mm plate thickness 3.0 mm thickness at "Niro-steel" 1.5 mm no. of strokes 35 Hub/min Bwsdpfxexablls Afmsw cutting angle 2°30 ° engine output 3.0 kW table height 810 mm weight of the machine ca. 1150 kg. range L-W-H 1300 x 1520 x 1170 mm from a maintenance workshop (!!) Furnishing: - robust electro-motorized metal sheet shears - manual backgauge - adjustable up to 610 mm, using the handwheel from the back - 1x side stop including mm scale - 2x table sheet metal support arms - Piece counter - freely movable foot switch - rear sheet metal slide - EMERGENCY stop button at the front * Machine link: ?machineno=1008-9325126

Condition: like new (used), Year of construction: 2022, immediately available, warranty 12 months, excellent condition Forced convection oven for solvent-containing substances according to DIN EN 1539, 4 charging carts available on request (see image) - Max. temperature 150°C - Usable volume 1875 liters - Internal dimensions: W 1250 x D 1000 x H 1500 mm - External dimensions: W 1765 x D 1425 x H 2300 mm - Guide rails and recesses for loading the oven with a charging cart - Maximum permissible amount of flammable substances at 150°C: 83.9 g - Minimum exhaust air flow rate at 20°C: 360 m³/h - KS controller 40-1 for simple temperature control with defined ramp or hold times (1 program, 4 segments) - Controller upgrade to JUMO DICON available on request - Additionally, a simple timer is integrated, which can be started via front buttons - Connection: 30 kVA, 3 x 400 V, 57 A, 50 Hz - Heating power: 36 kW - Weight: 820 kg Bwjdpfx Asxbtvfsfmow - Includes 4 charging carts, each with 12 trays and 24 insertion levels, available in stainless steel - Documentation, CE declaration - Electrically tested and with current DGUV test report Inspection in our warehouse by appointment. Oven, drying oven, baking oven, heating oven, industrial oven, solvent oven, paint drying oven, annealing oven, heating oven, temperature oven, drying cabinet, chamber oven, chamber dryer, sintering oven, convection drying cabinet, convection oven

Condition: used, Year of construction: 2022, Übersicht Dieses Sudhaus wurde 2022 von der chinesischen Firma JingYing gebaut. Es wird verkauft, da die aktuelle Brauerei erweitert wird. Es handelt sich um ein dampfbeheiztes 3-Gefäß-Towersudhaus in sehr gutem, gepflegtem Zustand. Die Anlage wird mit Funktionsgewährleistung bei Lieferung angeboten und ist sofort verfügbar. Bsdpsxhf Sfsfx Afmsww Technische Daten - Ausschlagwürze: 10 hl pro Sud - Konfiguration: 3-Gefäß-Sudhaus (Maisch-/Würzepfanne, Läuterbottich, Whirlpool) - Heizsystem: Dampfbeheizt - Steuerung: Halbautomatische SPS (Steuerung von Pumpen, Heizung, Rührwerken, Temperaturprofilen, Rezepteinwahl) - Gärung: 10 zylindrokonische Gärtanks à 20 hl (2 bar, Kühlmäntel, CIP-Kugel, Manometer, Probenahmeventile) - Kühlung: Kälteaggregat 6 HP (~4,5 kW mechanisch, ~12–18 kW Kälteleistung), Wasser-Glykol-System, Bereich −4 bis +10 °C - Dampferzeuger: Elektrisch beheizt, 72 kW (≈1 °C/min für 10 hl Wasser) - Zusatz: Kaltwassertank 30 hl (isoliert, Kühlmantel), Malzmühle 300 kg/h, CIP-Armaturen, Tri-Clamp-Fittings, Schläuche, Ventile, Dichtungen, Probenahmeventile - Erweiterung: 10 Magnetventile (je eines pro Gärtank, automatische Einzelkühlung über gemeinsamen Glykolring) - Sudhaus - Durchmesser Maischpfanne/Läuterbottich 1460 mm - Gesamthöhe inkl. Schaltschrank/Steuerung 2860 mm (Das ist der Höhste Punkt der Anlage) - Podesthöhe 1100 mm (Hier lässt sich die Bedienerbühne leicht kürzen wenn nötig) - ZKT's 10 x 20 hl - Durchmesser 1510 mm - Gesamthöhe 3300 mm Lieferumfang - Sudhaus | JingYing | 10 hl, 3-Gefäß-Towersystem | 2022 | Dampfbetrieben, SPS-Steuerung - 10x Gärtanks | JingYing | ZKT 20 hl | 2022 | 2 bar, Kühlmäntel - Whirlpool | JingYing | 10 hl | 2022 | Mit tangentialem Einlass - Kaltwassertank | JingYing | 30 hl | 2022 | Isoliert, mit Kühlmantel - Malzmühle | JingYing | 300 kg/h | 2022 - Dampferzeuger | JingYing | Elektrisch, 72 kW | 2022 - Kälteanlage | JingYing | 6 HP (~12–18 kW) | 2022 | Wasser-Glykol-System −4 bis +10 °C - Podest & Verrohrung | JingYing | — | 2022 | Mit Pumpen, Schaugläsern, Ventilen, CIP-Armaturen - Zubehör | JingYing | — | 2022 | Tri-Clamp-Fittings, Schläuche, Kupplungen, Dichtungen - Magnetventile | JingYing | — | 2022 | 10 Stück, für Einzelkühlung der Gärtanks

Condition: as good as new (ex-display), Year of construction: 2026, sheet width 1050 mm plate thickness 3.3 mm pre-bending 3.0 mm roll length 1050 mm roll diameter 90.0 mm min. dia. 130 mm engine output 1.10 kW weight 570 kg range L-W-H 1.800 x 800 x 1.130 mm Exhibition machine from 2026 With only approximately 2 operating hours Condition like new Special price upon request Furnishing: - Robust electro-mechanical bending machine - 2x central rollers driven by an electric motor (top and bottom roller) - Top roller can be swiveled out manually, with folding bearing - including conical bending device - freely movable control panel - Lower roller manually adjustable, by hand wheel - asymmetrical roller arrangement - self-braking main motor - Safety device (safety line with switch unit) - CE mark/Declaration of Conformity Bodew U U Udspfx Afmsww Special equipment included in the price: - hardened rollers - Motorized side roller adjustment - Digital position display for motor-driven adjustable side roller

Condition: used, HUBER Circulating chiller / Thermostat / Process chiller Huber UC055Tw special model Water-cooled circulating chiller for industrial temperature control and cooling applications For sale is a used, water-cooled circulating chiller from Peter Huber Kältemaschinenbau GmbH. This unit is suitable for cooling and temperature control of machines, industrial plants, process circuits, production facilities, and for general industrial cooling applications. Technical data: Bwsdpfxjzui Uwo Afmow Manufacturer: Peter Huber Kältemaschinenbau GmbH Type: UC055Tw special model Equipment type: Water-cooled circulating chiller / Thermostat Temperature range: -10 to +40 °C Dimensions: approx. 600 × 600 × 1450 mm (W × D × H) Weight: approx. 168 kg Refrigerant: R507 Refrigerant quantity: 1.07 kg CFC and HCFC-free Power connection: 400 V / 3~ N / 50 Hz Max. power consumption: 7 A Max. pressure: 25 bar Refrigeration unit: Water-cooled Temperature range: -10 to +40 °C Equipment: Huber Compatible Control system Digital temperature display Water-cooled refrigeration unit Circulation pump Connections for external temperature control circuit Cooling water connections Drain Residual drain Interfaces Main switch Stainless steel housing Transport rollers Lifting eyes Accessories as shown in the pictures Application areas: Process cooling Machine cooling Industrial plants Production facilities Temperature control of external circuits Cooling water supply Laboratory and process engineering Scope of delivery: 1 × Huber UC055Tw special model circulating chiller Connection / cooling water hoses as shown in the pictures Accessories as shown in the pictures Condition: Used Optical condition as shown in the pictures The table shown in the photos and any other items not explicitly mentioned are not included in the sale. Shipping or freight shipping is possible. Subject to changes, errors and prior sale. We will gladly answer any further questions by telephone.

Condition: good (used), axle configuration: 1 axle, permissible axle load (axle 1): 10,000 kg, first registration: 12/2012, loading space length: 10,600 mm, loading space width: 2,480 mm, loading space height: 2,620 mm, total length: 10,890 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 275 / 70 / R22.5, wheelbase: 7,060 mm, color: green, Equipment: tail-lift, Axle configuration Tyre size: 275 / 70 / R22.5 Bedpfx Afjz R Nb Nsmoww Make axles: SAF Brakes: disc brakes Suspension: air suspension Rear axle: Double wheels; Max. axle load: 10000 kg; Steering; Tyre profile left inner: 30%; Tyre profile left outer: 30%; Tyre profile right outer: 30%; Tyre profile right outer: 30% Weights Empty weight: 6.880 kg Carrying capacity: 15.120 kg GVW: 22.000 kg Functional Tail lift: Dhollandia DHLSU.40, tail lift, 2000 kg Make of bodywork: Groenewegen Jumbo Plywood Box Maintenance, history and condition Number of owners: 1 APK (MOT): tested until 12/2026 Technical condition: good Visual appearance: good Product safety Manufacturer: Kuijpers Trading BV Minosstraat 8 5048CK TILBURG, NL

Condition: good (used), axle configuration: 1 axle, permissible axle load (axle 1): 10,000 kg, first registration: 12/2012, total length: 10,890 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 275 / 70 / R22.5, wheelbase: 7,060 mm, color: green, Equipment: tail-lift, Axle configuration Tyre size: 275 / 70 / R22.5 Make axles: SAF Brakes: disc brakes Suspension: air suspension Bwjdpfoz R Ncaex Afmow Rear axle: Double wheels; Max. axle load: 10000 kg; Steering; Tyre profile left inner: 30%; Tyre profile left outer: 30%; Tyre profile right outer: 30%; Tyre profile right outer: 30% Weights Empty weight: 6.880 kg Carrying capacity: 15.120 kg GVW: 22.000 kg Functional Tail lift: Dhollandia DHLSU.40, tail lift, 2000 kg Maintenance, history and condition Number of owners: 1 Technical condition: average Visual appearance: good Product safety Manufacturer: Kuijpers Trading BV Minosstraat 8 5048CK TILBURG, NL

Condition: new, Schmersal TD 250-10/10Z-T Limit Switch with Roller Plunger New mechanical limit switch in a robust design with a cast iron housing and roller plunger for industrial applications. Manufacturer: Schmersal Type: TD 250-10/10Z-T Article number: 101058132 EAN: 4030661031019 Actuating element: Roller plunger Operating principle: Mechanical Switching principle: Incremental switching Housing material: Cast iron, galvanized and painted Number of contacts: 2 contact elements Cable entries: 2 × M25 × 1.5 Connection type: Screw connection Maximum connection cross-section: 2.5 mm² Degree of protection: IP67 Ambient temperature: -40 to +200 °C Bedpfoz Rv Eyox Afmjww Rated operating voltage: 400 V AC Rated operating current: 4 A Thermal continuous current: 16 A Rated insulation voltage: 400 V Rated impulse withstand voltage: 6 kV Maximum switching frequency: 3,000 switching cycles/h Mechanical life: At least 10,000,000 switching cycles Maximum operating speed: 3 m/s at a 30° vertical approach angle Dimensions (L × W × H): 125 × 146 × 257 mm Gross weight according to the manufacturer: 4,364 g Standard: EN IEC 60947-5-1

Condition: good (used), Year of construction: 2007, Machine is in good working condition. Bwodoz N Dpkepfx Afmow

Condition: used, plate width 1020 mm plate thickness 4 mm diameter of upper rolls 110 mm total power requirement 2,2 kW weight of the machine ca. 900 Kg dimensions of the machine ca. 2,1 x 0,7 x 1,2 m Fasti three-roll plate bending machine / plate rolling machine In excellent condition. The machine was completely overhauled in 2016. Bwjdpfx Aoz N Hwqsfmsw

Condition: used, functionality: fully functional, Year of construction: 2020, operating hours: 94 h, load capacity: 1,000 kg, lifting height: 4,471 mm, free lift: 1,650 mm, fuel type: electric, mast type: triplex, construction height: 1,940 mm, fork length: 1,150 mm, drive type: Elektro, High-lift pallet truck Bodpfj Adv Hpjx Afmjww Load center: 600 Mast type: Triplex Condition: Like new Technical condition: very good Front tire type: Vulkollan Rear tire type: Vulkollan Battery voltage: 24V Battery capacity: 200Ah Battery manufacturer: Hawker Battery type: PzS Battery year of manufacture: 2020 Battery condition: 60 - 80% Description: Delivery with new FEM 4.004 inspection. If you have any further questions, please do not hesitate to call us. In addition to this model, we have approximately 150 other forklifts in stock. Visit our website for leasing and financing options. We can also provide you with a quote for delivery at favorable conditions. We also offer trade-in options for Linde equipment – even if you do not purchase equipment from us. The operating hours stated were recorded at the time of listing. Subject to prior sale, changes, and errors. Full free lift.

Condition: used, Year of construction: 1973, x-travel:815 mm y-travel:400 mm z-travel:410 mm quill stroke:130 mm turning speed range - stepless:67 - 2300 U/min :8 feed speeds:0,04 - 0,08 - 0,15 mm/min feeds of table:15 - 230 mm/min table surface area:1120 x 255 mm T-Slots:3 mm T-slot - width:16 mm T-slot - distance:63 mm Bwjdpfxj Ad Si Te Afmsw distance spindle - column:260 mm ram adjustment:315 mm main drive motor:1,5 kW weight of the machine ca.:1,0 t dimensions of the machine ca.:1,75 x 1,80 x 2,10 m

Condition: used, TECHNICAL DETAILS - number of tanks : 10 - Speed : 1500 - 3600 [rpm] POWER SUPPLY - Total installed power : 1.4 [kW] WEIGHT & DIMENSIONS - Machine floor space : 705 x 847 [mm] - Machine height : 1297 [mm] - Machine weight : 205 [kg] Bodpfj Adl E Uox Afmeww

Year of construction: 2010, condition: used, Storax 10ton Bsdpfxozcu S Ej Afmsww Length 12 mtr Hydraulic adjustable Immediately available If you are interested in our loading bridge, we can arrange transport for you.

Condition: used, Tenoning spindle 2 Stk. Number of milling agregates 5 St. Spindle diameter 50 mm Control Weinig, PC-Nexus Weinig Unicontrol 10 NC Window System — Optional: Extensive Tooling Set ----- Optionally available (at an additional cost): IV 68 Wood, Wood/Aluminum IV 78 Wood, Wood/Aluminum IV 68 Entrance Doors Manufacturer's Technical Description: ----- Item 1: Weinig Unicontrol 10 NC Window System ----- Cross-cut Saw ----- with laser alignment light; motor power: 3 kW; spindle diameter: 40 mm; spindle speed: electronically variable (with brake) from 3,000 to 6,000 rpm. Max. tool cutting circle: 400 mm Axial adjustment: 150 mm via NC axis Radial adjustment: pneumatic, to 8 positions for top edge rounding Horizontal bottom rounding unit ----- Axial adjustment travel: mechanically coupled with cut-off saw 1st Tenoning and Slotting Spindle ----- Motor power (with brake): 15 kW Spindle diameter: 50 mm Spindle speed: 2,925 rpm Max. tool cutting circle: 400 mm Tool clamping length: 640 mm Axial adjustment travel: NC axis Home position (below table): 5–10 mm Radial adjustment travel: fixed 2nd Tenoning and Slotting Spindle ----- Motor power (with brake): 11 kW Spindle diameter: 50 mm Spindle speed: 2,925 rpm Max. tool cutting circle: 400 mm Tool clamping length: 320 mm Axial adjustment travel: NC axis Radial adjustment travel: NC axis Home position (below table): 5–10 mm 1st Profiling Spindle (Climb and Conventional Milling) ----- Motor power (with brake): 11 kW Spindle diameter: 50 mm Spindle speed: 6,000 rpm Tool cutting circle: 140 mm Max. tool diameter: 232 mm Tool clamping length: 400 mm (with outboard bearing) Axial adjustment travel: 350 mm (NC axis) Radial adjustment travel: NC axis Home position (below table): 5–10 mm 2nd Profiling Spindle ----- Motor power: 11 kW Spindle diameter: 50 mm Spindle speed: 6,000 rpm Tool cutting circle: 140 mm Max. tool diameter: 232 mm Tool clamping length: 400 mm (with outboard bearing) Axial adjustment travel: 350 mm (NC axis) Radial adjustment travel: NC axis Home position (below table): 5–10 mm Horizontal Profiling Unit (Top) ----- Motor power (with brake): 3.0 kW Spindle diameter: 40 mm Clamping length: 40 mm Spindle speed: 5,850 rpm Max. tool cutting circle: 130 mm Pneumatic adjustment: 8 positions (axial and radial) 3rd Profiling Spindle ----- Motor power: 11 kW Spindle diameter: 50 mm Spindle speed: 6,000 rpm Bedpfx Afszawizsmsww Tool cutting circle: 140 mm Max. tool diameter: 232 mm Tool clamping length: 400 mm (with outboard bearing) Axial adjustment travel: 350 mm (NC axis) Radial adjustment travel: NC axis Home position (below table): 5–10 mm Vertical Profiling Unit (Right, at Machine End) ----- Motor power (with brake): 3.0 kW Spindle diameter: 40 mm Clamping length: 160 ...

Condition: used, Year of construction: 2020, Overview  This labelling machine was manufactured in 2020 by Gernep. The machine is designed for labelling applications in the juice industry. The machine is currently still installed and under power and can be visited on request. Technical data - Capacity: 10,000 bph - Application: Juice - Configuration: Gernep Labetta 4/3/10 640 2A - Labelling technology: Cold glue / Rollina Bjdpfx Ajzazkvefmsww - Labelling stations: 2 × cold glue aggregates - Bottle Formats - Container type: Glass bottles (fruit juice) - Typical formats: - 1.0 L VDF (H=307 mm, Ø90 mm) - 0.5 L NRW (H=260 mm, Ø68 mm) - Special capability: - Suitable for hot-fill applications - Label Data - 1st cold glue station: - Label length: approx. 25 – 140 mm - Label height: max. 150 mm - Lower edge: max. 15 mm - Upper edge: max. 320 mm - 2nd cold glue station (incl. wrap capability): - Label length: approx. 25 – 140 mm - Up to 170° wrap-around of bottle circumference - Label height: max. 150 mm - Lower edge: max. 15 mm - Upper edge: max. 220 mm - Applications: - Body label - Front (chest) label - Back label

Condition: used, Year of construction: 2018, operating hours: 5,778 h, 2018 | Kobelco SK300LC-10 | Used Tracked Excavator | 5778 hours 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 89600 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 66 inspection points 62 approved ✅ 4 imperfect ℹ️ 0 issues ⚠️ Bwedpfoz Ei S Uox Afmew 📌 Inspector's Comment: Good general and operational condition. 3 buckets in good condition. Broken pressure detectors will be replaced for sale. Regular maintenance without notable replacement of essential parts. Apart from slight play in the boom and in the bucket coupler, the machine shows little signs of wear. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40812 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, New: No Please contact us for more information. Bwsdpfxjz D Irks Afmjw

Condition: refurbished (used), Year of construction: 2017, machine/vehicle number: R-00566, load capacity: 10 kg, arm reach: 2,530 mm, controller manufacturer: IRC5, teach pendant manufacturer: DSQC679, Refurbished ABB  4400L/10 manufactured in 2017.05. The robot comes with an IRC5 controller including Flexpendant DSQC679.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The oil is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: ABB Model: 4400L/10 Model Number: IRB Year of Manufacture Robot: 2017.05 Warranty term (months): 12   Payload (kg): 10 Reach (mm): 2530 Repeatability (mm): ± 0.05 Controlled Axes: 6-axis Installation Type: Floor Mount Weight (kg): 1040 Bwsdpjz D I Ulsfx Afmew   Controller: IRC5 Year of Manufacture Cabinet: 2017.05 RCC Length (m): 14   Teach Pendant: DSQC679 Teach Pendant Cable Length (m): 15

Condition: not inspected (used), Year of construction: 2011, operating hours: 12,000 h, functionality: unexamined, machine/vehicle number: 1200 000043 7, TECHNICAL SPECIFICATIONS CNC control: Siemens Sinumerik 840D Number of axes: 5 axes Travels X-axis travel: 120 mm Y-axis travel: 120 mm Z-axis travel: 200 mm A-axis: -10° to +120° Bwjdpfx Aez Efpcsfmsw C-axis: 360° continuous Rotary table Diameter: 190 mm Maximum load: 10 kg A-axis speed: up to 100 rpm C-axis speed: up to 150 rpm Spindle Maximum speed: 40,000 rpm Power: approx. 6 kW Maximum power: approx. 7.7 kW Torque: approx. 1.6 Nm High-frequency spindle with ULTRASONIC technology Feed rates Rapid traverse X/Y/Z: up to 10 m/min Tools Tool holder interface: depending on machine configuration Maximum tool length: approx. 130 mm Maximum tool diameter: approx. 49 mm Tool magazine: depending on configuration General data Power supply: 400 V Connected power: approx. 25 kVA Compressed air: approx. 6 bar Machine weight: approx. 1,800 kg TECHNOLOGY The DMG SAUER ULTRASONIC 10 combines high-precision 5-axis CNC machining with ultrasonic-assisted machining technology. This technology is particularly well-suited for machining difficult materials such as: Ceramics Carbide / hard metal Glass Corundum Technical materials and hard and brittle materials Machine particularly suitable for the micromachining, watchmaking, medical/dental, optics, and high-precision application sectors. Subject to errors and changes in technical data.

Condition: used, WEINIG UNIVAR 10 automatic rebating machine from a UC-Matic window production line, not in working order. Bedpfoztv A Sex Afmeww Technical data: - Year of manufacture: 1997

Condition: good (used), mileage: 906,455 km, power: 341 kW (463.63 HP), first registration: 09/2012, fuel type: diesel, tire size: 445 / 65 / R22.5, axle configuration: 8x4, wheelbase: 6,150 mm, fuel: diesel, brakes: engine braking, color: white, driver cabin: day cab, gearing type: automatic, number of gears: 16, emission class: euro5, suspension: other, number of seats: 2, total length: 8,760 mm, total width: 2,550 mm, total height: 3,700 mm, permissible axle load (axle 1): 10,000 kg, permissible axle load (axle 2): 10,000 kg, permissible axle load (axle 3): 11,500 kg, Equipment: ABS, air conditioning, central locking, crane, cruise control, differential lock, electric window regulation, power mirror, spoiler, trailer coupling, Technical information Number of cylinders: 6 Engine capacity: 12.902 cc Transmission Transmission: ZF, 16 gears, Automatic Axle configuration Make axles: Ginaf Brakes: drum brakes Front axle: Tyre size: 445 / 65 / R22.5; Max. axle load: 10000 kg; Steering; Tyre profile left: 75%; Tyre profile right: 75%; Suspension: leaf suspension Rear axle 1: Tyre size: 445 / 65 / R22.5; Lift axle; Max. axle load: 10000 kg; Steering; Tyre profile left: 40%; Tyre profile right: 40%; Suspension: hydraulic suspension Rear axle 2: Tyre size: 13 R22.5; Double wheels; Differential lock; Max. axle load: 11500 kg; Tyre profile left inner: 30%; Tyre profile left outer: 30%; Tyre profile right outer: 30%; Tyre profile right outer: 30%; Reduction: hub reduction; Suspension: hydraulic suspension Rear axle 3: Tyre size: 13 R22.5; Double wheels; Differential lock; Max. axle load: 11500 kg; Steering; Tyre profile left inner: 30%; Tyre profile left outer: 30%; Tyre profile right outer: 30%; Tyre profile right outer: 30%; Reduction: hub reduction; Suspension: hydraulic suspension Weights Empty weight: 15.815 kg Carrying capacity: 27.185 kg GVW: 43.000 kg Functional Crane: VDL S-30-6600, year of manufacture 2012, behind the cab Interior Interior: grey Condition Technical condition: good Visual appearance: good Number of keys: 2 Product safety Manufacturer: Kuijpers Trading BV Minosstraat 8 5048CK TILBURG, NL = Additional options and accessories = - 12 volt socket - Air horn - Armrest - Coupling - Heavy duty engine brake - Hydraulic - Low-noise - Power take-off (PTO) - Radio, MP3 enabled - Radio/CD player - Remote central locking - Reversing camera - Speed limiter - Spoilers Bsdpfx Aoz Nwlrjfmsww - Stability control - Toolbox - Visor