Used Gbh 10 for sale (78,093)

Condition: excellent (used), Year of construction: 2006, CREEMERS RCB11/10 11kw VERTICAL COMPRESSOR CREEMERS RCB11/10 screw compressor machine after service Technical data: capacity: 1450 L/min; 11KW motor; 10 bar pressure; mileage 11033h!!! 2006; compressor fully operational. Gkedpfjtq Sbfsx Aacsc net price: 8200zł gross price: 10086 zł

Condition: new, Year of construction: 2022, overall weight: 250 kg, total length: 120 mm, total width: 80 mm, total height: 120 mm, volume flow: 180 m³/h, pressure (max.): 10 bar, Equipment: type plate available, PROD - CZEMAR TYPE - LEVANTER 22/10 S/N - 38020 YEAR - 2022 POWER (kW) - 22 OUTPUT. (m3/min) - 3.0 Gksdpfxerck Eco Aacoc CIS (bar) - 10

Condition: excellent (used), Year of construction: 2011, operating hours: 1,300 h, functionality: fully functional, machine/vehicle number: 201108502924, measuring range X-axis: 700 mm, measuring range Y-axis: 1,000 mm, measuring range Z-axis: 600 mm, year of last overhaul: 2025, Equipment: type plate available, CNC Coordinate Measuring Machine ZEISS CONTURA G2 7/10/6 VAST XXT RDS-CAA Serial number: (201108502924) Measuring range: X = 700 mm, Y = 1000 mm, Z = 600 mm Machine in very good condition, Operating time approx. 1300 operating hours X-axis distance approx. 22 km Y-axis distance approx. 18 km Z-axis distance approx. 16 km Length measurement error according to ISO 10360-2 Gkedpswlhv Dofx Aacoc for RDS/direct VAST XXT: MPE_E = (1.8 + L/300)µm, MPE_P = 1.8µm for RDS with RST-P/TP 20/200: MPE_E = (2.2 + L/300)µm, MPE_P = 2.0µm Scanning performance according to ISO 10360-4 for RDS/direct VAST XXT: MPE_THP = 3.5 µm in 68 s Device functions, equipment - Portal measuring device in ceramic technology with fixed equipment table - Table height approx. 850 mm - Integrated vibration damping - Scan control via computer (ISC) in external cabinet - Wiring prepared for RDS and VAST XXT/direct multi-sensor technology Sensors/accessories RDS-CAA base unit for Zeiss portal measuring machines consisting of: RDS-CAA-select joint with +/- 180° adjustment range and 2.5° increments, which gives 20,736 usable positions. The RDS-CAA select has a multi-sensor mount for touch switching, scanning and optical sensors. The following sensors are supported in CAA calibration mode: - ZEISS/Renishaw touch switching sensors (RST-P, TP2, TP6, TP20, TP200). - Zeiss VAST XXT TL3 scanning sensor and - XDT TL3 multi-point sensor (including PS calibration module with Calypso CAA license).

Year of construction: 2001, condition: good (used), functionality: fully functional, Pinomatic cross conveyor for a planing and sawing line Year of manufacture: 2001 Manufacturer: Pinomatic OY Type: POS 9+10 S/N: P1033 Gkjdsv S Hfxspfx Aacjc Motor-driven cross conveyor with 7 chain hoists Arm length: 6000mm Cross conveyor width: up to 4000mm (adjustable) Height: 900mm 6 fixed chain hoists 1 adjustable chain hoist Voltage: 230/400VAC

Year of construction: 2015, condition: like new (used), I sell the screw compressor: MARK MSB 30/10 Motor - 30kW, Power - 3540 l/min., 212 m3/hr. Pressed air max.10 bar Year 2015. Godsiu Icvopfx Aacskc All working, like new.

Year of construction: 1993, condition: used, Chamfer lenght: 3.000 mm Gkedekh Niqspfx Aacec Stands passage: 2.750 mm Max. pressure: 180 t Control: CYBELEC DNC 70 Stroke: 220 mm Total power: 15 kW Weight of the machine: 11.000 kg

Condition: excellent (used), Year of construction: 2006, CREEMERS RCB11/10 11kw VERTICAL COMPRESSOR CREEMERS RCB11/10 screw compressor machine after service Technical data: capacity: 1450 L/min; 11KW motor; 10 bar pressure; mileage 11208h!!! 2006; Gksdpfxjttvdvo Aacsc compressor fully operational. net price: 8200zł gross price: 10086 zł

Condition: good (used), Year of construction: 2003, functionality: fully functional, section length (min.): 4,430 mm, M&R sportsmann, made in the US. this is a very reliable and accurate printing machine in a good working condition. She is 100% accurate and has prove that she is worth her money. More information, pictures or videos upon request. Machine has extra set of plates. Gedpfxouyhkij Aacokc

Condition: used, machine/vehicle number: 008188, Stock dimension length: 43000 mm Stock dimension width: 9000 mm Gjdpfx Aajxbph Rocekc

Condition: used, Year of construction: 2015, Technical details: turning diameter: 16 mm Article: CNC automatic lathe Manufacturer: Tornos Type: EvoDeco 16/10 Gksdpfxjtwgk Ns Aacoc Year of construction: 2015 CNC axes: 10 Very good technical condition - used in current production With barloader The machine has a very extensive equipment - 4 rotating tools, which offer very large machining possibilities. Please, contact us for getting more information and pictures on mail(at) or *

Condition: used, machine/vehicle number: 007906, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 32 m/min Godpfx Aowucm Aeacjkc Maximum panel thickness: 60 mm Operating Units: 12 nr

Condition: used, Year of construction: 1996, MAZAK SUPER QUICK TURN 10 MS CNC LATHE MAKE MAZAK, MADE IN JAPAN MODEL SUPER QUICK TURM 10 MS YEAR 1996 CONTROL MAZATROL T PLUS MAX SWING 435mm SWING OVER CARRIAGE 370mm MAX. MACHINING DIA 230mm MAX. BAR WORK DIA 42mm MAX DISTANCE BETWEEN SPINDLES 705mm SPINDLE MOTOR AC11kw (15HP) SPINDLE SPEED 6000rpm 2ND SPINDLE MOTOR AC5.5kw (7.5HP) 2ND SPINDLE SPEED 6000 rpm ROTARY TOOL MOTOR AC2.2kw (3HP) ROTARY TOOL SPEED 3000 rpm TURRET TOOL CAPACITY 12 TOOLS STATIONS RAPID TRAVERSE RATE X,Z:30m/min (1180IPM),C: 400rpm MACHINE DIMENSION L x W x H, 2705mm x 1465mm x 1835mm MACHINE WEIGHT 3850kg PLUS C-AXIS SUB SPINDLE Gjdexnpp Iepfx Aacjkc DRIVEN TOOLS (3 NO.S) PARTS CATCHER SWARF CONVEYOR TOOL SETTING PROBE COLLET CHUCK BUILT IN TRANSFORMER FULL SET OF MANUALS GOOD WORKING ORDER

Condition: used, Comprehensively tested, used stainless steel Aeromatic Fielder model GP1 VP mixer / granulator. Gedsxlghiepfx Aacekc Manufacturer: Aeromatic Material: Stainless Steel Capacity: 10 litres Type of Blades: Bottom entry 3-blade mixer with drive, and a side entry chopper. Also includes: Jacketed removeable bowl and local controls. Various inserts to reduce bowl capacity. Unit is mounted on mobile base.

Condition: used, Year of construction: 1995, SIDEL SBO10- blowing machine SBO10 is intended to manufacture PET bottles. Its production rate can be up to 10.000 bottles per hourdepending on the capacity. As first step, the operator puts the preform bin, via trans pallet or forklift, in the hoisting and tipping unit (SAMETO brand) and the preforms inserts in the hopper. After that, the elevator transfers the preforms to the horizontal elevator, the unscrambler and the final gravity guide (infeed rails).The below schematic diagram describes the general process of SBO10 machine: which consists of: 1. Preform infeed rails 2. Preform infeed wheel 3. Infrared oven 4. Preform transfer wheel 5. Blow wheel 6. Bottle transfer wheel 7. Bottle evacuation GENERAL Presentation 1. Infeed of cold preforms Cold preforms are inserted by an inclined ramp. They are hung by the neck and are guided by two rails between which they are lowered by gravity. 2. Preform heating linear oven The preforms, grasped in the spindles at the neck, are turned 180 degrees so that they are head down and are made to rotate as they pass in front of infrared lamps. The linear oven has 10 heating modules. Each oven module has 8 infrared lamps. Ath oven exit, an infrared camera reads the preform temperature so as the automatic regulation of all the areas coming under its control. 3. Hot preform transfer wheel A transfer wheel with 6 arms conveys the hot preforms through the blowing moulds when they leave the oven. Gjdpfxexlm Nyj Aacokc 4. Preform ejection An ejection system is mounted after the preform transfer wheel, in case of a non correct temperature of a preform. 5. Blow wheel Preforms are put in the mould for which opening and closing are assured by a system of connecting rods operated by a cam. The mould is locked by a mechanical device. Blow nozzle guides the stretching rod, which ensures longitudinal orientation. A set of cameras synchronizes the whole process. The moulds are controlled for temperature by chilled water circulation. 6. Bottle transfer wheel A transfer wheel with 6 arms picks up the bottles in the moulds to evacuate them from the blowing wheel. 7. Bottle ejection An ejection system is mounted after the bottle transfer wheel. It is completed by a set of photocells. If the bottle is not correct, it is ejected. 8. Bottle outfeed wheel. An outfeed wheel with 8 notches receives the bottles comes from the transfer arms and puts them down on a belt. They are held by guides. The bottle outfeed can be linked to a conveyor system. - Hoisting and tipping unit (1996) - Hopper (1995) - Elevator (1995) - Orienting rollers (1995) - Unscrambler (1995) - Gravity rails (1995) - linear oven (1995) - Blow wheel with 10 moulds (1995) - Bottle outfeed wheel (1995) - Operator control panel (1995) - Electrical cabinets (1995) 12. Chiller (1998) Energy and fluid consumption 1. Electricity Max supplied power: 216kW Average consumption: 120 to 160 kW/h according to item Voltage: 380 (3phase) Frequency: 50/60 Hz 2. Compressed air Supplied power: from 7 to 35 bar Control air pressure: 7 bar flow: 60 to 125 Nm3/h according to item Air quality: dry air, deoiled and filtered to 0,1 ppm Spherical base pressure: up to 25bar flow: 170 to 830 Nm3/h Free standing base pressure: up to 35 bars flow: 235 to 1.100 Nm3/h 3. Chilled water temperature: 10 to 12 celsium degrees pressure: 5 to 6 bars flow: up to 9 m3/h calories to be removed: up to 22.000 Kcal/hour Max supplied power: 216kW Voltage: 380 (3phas...

Condition: used, Used Renishaw MP10 touch probe Godpfxoxnnbpo Aacekc Tool holder: capto C6

Condition: excellent (used), Year of construction: 2022, IES screw compressed air units supply a continuous, reliable flow of compressed air directly to the point of use without requiring a dedicated room. The ECB – SCB range, made according to high quality standards, uses components by leading companies on the market, ensuring reliability and traceability. 7.5 KW Gjdpjxaxr Njfx Aacekc 8 Bar 1000 lts/min Very low running hours - 1351 run hours Complete with three filter set

Condition: good (used), power: 562 kW (764.11 HP), fuel type: diesel, color: yellow, Year of construction: 2020, operating hours: 8,905 h, Equipment: air conditioning, General information Field of application: Construction Serial number: RAB00XXX Technical information Track width: 61 cm Drive: Track Make of engine: C27 ACERT Empty weight: 70.170 kg Functional Gkjdpexlulisfx Aacsc Working width: 494 cm CE mark: yes Condition Technical condition: good Visual appearance: good Other information Front tyres / undercarriage remaining: 85 Delivery terms: EXW Production country: US Additional information Please contact Antoon Schroder, Dennis van Loon or Jeroen Rijk for more information

Condition: used, Year of construction: 1996, MAZAK SUPER QUICK TURN 10 MS CNC LATHE MAKE MAZAK, MADE IN JAPAN MODEL SUPER QUICK TURM 10 MS YEAR 1996 CONTROL MAZATROL T PLUS MAX SWING 435mm SWING OVER CARRIAGE 370mm MAX. MACHINING DIA 230mm MAX. BAR WORK DIA 42mm MAX DISTANCE BETWEEN SPINDLES 705mm SPINDLE MOTOR AC11kw (15HP) SPINDLE SPEED 6000rpm 2ND SPINDLE MOTOR AC5.5kw (7.5HP) 2ND SPINDLE SPEED 6000 rpm ROTARY TOOL MOTOR AC2.2kw (3HP) ROTARY TOOL SPEED 3000 rpm TURRET TOOL CAPACITY 12 TOOLS STATIONS RAPID TRAVERSE RATE X,Z:30m/min (1180IPM),C: 400rpm MACHINE DIMENSION L x W x H, 2705mm x 1465mm x 1835mm MACHINE WEIGHT 3850kg PLUS C-AXIS SUB SPINDLE DRIVEN TOOLS (3 NO.S) PARTS CATCHER SWARF CONVEYOR TOOL SETTING PROBE COLLET CHUCK BUILT IN TRANSFORMER FULL SET OF MANUALS Godpfx Aajxgnzmscokc GOOD WORKING ORDER

Condition: used, Year of construction: 2015, operating hours: 1,030 h, fuel type: electric, total height: 2,250 mm, total length: 1,600 mm, total width: 800 mm, color: other, Empty weight: 2.580 kg Price: On request - Towing capacity: 4000kg - Number of wheels: tal_wielen.3 Wielen - Options: Non-marking banden - Drive: Elektric - Brand/Type: Hawker - Battery voltage: 24V - Year: 2015 - Documentation available: No - CE marking present: Yes Gsdpfx Aaswynb Nocjkc - Serial number: F21068F00033 - Operating hours: 1030 - Transport dimensions: 1600mm x 800mm x 2250mm (l x w x h) - Transport weight [kg]: 2580kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Tess van den Boom

Year of construction: 1988, condition: used, Power: 1 kW (1 HP) Manufacture : Goavec SA Gkedpjxmafksfx Aacoc Year : 1988 Type: storage/process tank Previous application: Cream tank (fluid/thick) Volume : 10 000 Liters Material: 304 stainless steel Jacketed: Working pressure 3.5 bar / Maximum pressure: 5.25 bar Motor power: 0.75 kW Agitation: 2 three-bladed paddles (1 fixed / 1 removable) Washing balls: 3 units Inspection hatch: manhole Removable guardrail External dimensions: 5 x 2 metres Motor checked and tested prior to sale.

Condition: used, Year of construction: 2001, travel distance X-axis: 710 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 660 mm, controller manufacturer: Mazatrol, controller model: Fusion 640 M, total height: 3,050 mm, total length: 7,109 mm, total width: 7,805 mm, table width: 500 mm, table length: 500 mm, table load: 500 kg, rotational speed (min.): 35 rpm, rotational speed (max.): 15,000 rpm, overall weight: 11,600 kg, spindle speed (min.): 35 rpm, spindle speed (max.): 15,000 rpm, Horizontal Machining Centre with Palletech CNC Control Mazatrol Fusion 640M Pallet table size 500 x 500 mm Number of pallets 10x Table load 500 kg Gkodpfx Aasxnmgdecjc Movement X-axis 710 mm Movement Y-axis 610 mm Movement Z-axis 660 mm Table indexing 360 x 1° Spindle Taper DIN 69871A Spindle speed 35 - 15.000 R/min Magazin capacity 120 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: used, Year of construction: 2019, operating hours: 2,800 h, lifting height: 1,870 mm, free lift: 870 mm, fuel type: electric, mast type: standard, fork length: 1,150 mm, total height: 2,450 mm, total length: 2,500 mm, total width: 800 mm, color: other, Empty weight: 1.060 kg Lifting capacity: 1.000 kg Fork dimensions: 1.150 x 560 mm - Working level: Laag - Lifting capacity: 1000kg - Lifting height: 1870mm - Overhead clearance: 2450mm - Free lift: 870mm - Fork length: 1150mm - Maximum fork width: 560mm - Options: Man-Up - Mast: Mono - Inspection valid until: 12.2025 - Drive: Elektric - Brand/Type: Still - Battery year of construction: 2019 - Capacity: 465Ah - Battery voltage: 24V - Year: 2019 - Documentation available: No - CE marking present: Yes - Serial number: 612101V00390 - Operating hours: 2800 - Transport dimensions: 2500mm x 800mm x 2450mm (l x w x h) - Transport weight [kg]: 1060kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Tess van den Boom Gkedpfxow Rya Ro Aacoc

Condition: used, Year of construction: 1995, total length: 650 mm, total width: 1,350 mm, total height: 1,900 mm, power: 1 kW (1.36 HP), Manufacturer: Ozaf srl Model: E 10 Year: 1995 Type: cleated conveyor belt / Giraffe conveyor. Power: 1.5 Kw Equipment: vibration system Gksdpfx Aaevlyy Njcjc Dimensions: 65 x 135 x 190 cm Discharge height: 120 cm

Condition: used, Year of construction: 2004, operating hours: 12,863 h, Type of fuel: Electric Empty weight: 2.116 kg Dimensions (LxBxH): 160 x 100 x 204 cm Lifting capacity: 1.000 kg Lift height: 276 cm Fork dimensions: 1.000 x 800 mm - Lifting capacity: 1000kg - Lifting height: 2760mm - Overhead clearance: 2040mm - Free lift: 0mm - Fork length: 1000mm - Maximum fork width: 800mm - Minimum fork width: 0mm Gkodpfxjw I Axko Aacsc - Number of wheels: 3 Wheels - Mast: Duplex - Drive: Elektric - Battery year of construction: 2014 - Battery voltage: 24V - Year: 2004 - Documentation available: No - CE marking present: Yes - Serial number: 515051003324 - Operating hours: 12863 - Transport dimensions: 1600mm x 1000mm x 2040mm (l x w x h) - Transport weight [kg]: 2116kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Tess van den Boom

Condition: used, Year of construction: 2004, operating hours: 514 h, Type of fuel: Electric Empty weight: 2.274 kg Dimensions (LxBxH): 175 x 110 x 310 cm Lifting capacity: 1.000 kg Lift height: 530 cm Fork dimensions: 1.000 x 800 mm - Lifting capacity: 1000kg - Lifting height: 5300mm Gsdpsw Ulm Rjfx Aacekc - Overhead clearance: 3100mm - Free lift: 0mm - Fork length: 1000mm - Maximum fork width: 800mm - Minimum fork width: 0mm - Number of wheels: 3 Wheels - Attachment: Side-shift - Options: Non-marking tires - Mast: Duplex - Drive: Elektric - Brand/Type: CMP - Capacity: 625Ah - Battery voltage: 24V - Year: 2004 - Documentation available: No - CE marking present: Yes - Serial number: 515051002334 - Operating hours: 514 - Transport dimensions: 1750mm x 1100mm x 3100mm (l x w x h) - Transport weight [kg]: 2274kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Tess van den Boom