Used Frame Clamp for sale (16,443)

Condition: new, Lifting /Turnover ("Butterfly") Device for raising panels from horizontal to vertical position or for turning over of panels to enable the fitting of insulation, or the nailing on both faces of a panel. Nedpedzc Rfsfx Aa Eelk A pair of hydraulically operated tables (also known as a butterfly table) that enable the panels to be brought to the vertical position, passed to the 2nd table, and safely lowered back down on the opposite side for fitting of insulation and closing of the panel. There is an option to have pneumatically operated pop up idle roller tracks fitted in the table, for easy loading and unloading the panels. The hydraulic lifting of the tables is controlled by push button operation 3,5kw motor 6m standard length (optional 12m) 4m maximum panel height Optional side and end stops for floor cassette assembly

Condition: good (used), Internal item no.: 25065 25 pcs. shrink fit holders HSK-A63 5x D4 5x D6 5x D8 5x D12 5x D16 Total length of holders approx. 160 mm Nlodpfexdlpvex Aa Ejk

Condition: used, tank capacity: 160 l, GENERAL Design: suspended Remarks: Suspended design in a tiltable frame made of V2A; without bottom outlet; top opening diameter approx. 700 mm (tapering towards the bottom; see photos) Nedpfx Aaoxqduqj Eolk Total height: 1,100 mm Heating/Cooling: available Top: open with loose lid Stand type: frame Location: Bremen Nameplate: Volume: 160 liters Product-contacting material: V2A 1.4301 (AISI304) Condition: used HEATING/COOLING JACKET Bottom temperature control: double jacket EQUIPMENT Outlet: not available MATERIAL SPECIFICATION Temperature system material: V2A 1.4301 (AISI304)

Condition: good (used), machine/vehicle number: 2824, Year of construction: 2011, total length: 6,000 mm, total width: 2,400 mm, SHT LIFTING FRAME 20" from Uniktruck Nledpfsw Nbpksx Aa Ejk

Condition: new, Year of construction: 2023, functionality: fully functional, overall weight: 3,900 kg, total length: 6,200 mm, total width: 1,200 mm, total height: 2,300 mm, motor manufacturer: Bitzer, power: 240 kW (326.31 HP), New Advansor Cubig 2 4x4 installation. Central CO2 refrigeration and freezing system. Equipped with Bitzer compressors and Alfa Laval plate heat exchanger for heat recovery. Cooling capacity: 105 kW at -8°C Freezing capacity: 90 kW at -48°C Complete set including condensers (gas coolers) and an additional plate heat exchanger for heat recovery. Fully pre-wired control panel with Danfoss control equipment. Nledpfxow R U Nme Aa Eok Eco gas cooler and Alfa Laval plate heat exchanger. Top brand – Danish quality. Including documentation, diagrams, and accessories.

Condition: used, Used machine Features and technical data: Working width: 300 mm Sanding belt oscillation: mechanical Roller guide: rubber-coated Sanding unit: with sanding shoe Feed speed: 2-stage Feed direction: reversible (forward/reverse) Motor start: star-delta Power supply: 380 V Weight: approx. 450 kg Availability: short-term Nedpfx Aoxq Ua Rja Eelk Location: Baden-Württemberg

Condition: new, A simple range of scissor type lifts for attaching to a crane hoist for the lifting of panels using (customer supplied) crane. 1 tonne capacity Minimum wall panel height 2000mm Njdpsfqmtkofx Aa Eslk Maximum wall panel height 3500mm One man operation Weight of unit 80kgs

Condition: like new (used), 2,000 pcs. Wooden Pallet Collar for Euro Pallet 120 x 80 x 20 cm, as new 🧰 Product Features • Material: Wood • Condition: As new Nledpfow Rkrwjx Aa Eek • Colour: Natural • External dimensions: 120 × 80 × 20 cm • Material thickness: 2 cm • Weight: approx. 9 kg • Volume: 190 litres • Surface: Weather-resistant • Suitable for: Euro Pallet • Basic construction: Foldable • Stackable: Yes 💰 Price per unit: €12 net, excl. VAT • Bulk discount: on request • Shipping costs: Europe-wide on request • Delivery time: Immediately available • Inspection and collection: possible anytime by appointment Constantly over 5,000 linear metres of pallet racking from various manufacturers in stock (Subject to changes and errors in technical data, information and prices, as well as prior sale! See our GTC, all prices excl. VAT ex warehouse.)

Year of construction: 1980, condition: used, passage width 560 mm Nlodpfxocvhnde Aa Eok passage height 560 mm stroke 600 mm Speed max. 320 1/ min. The creel is completely mechanized with new Moehringer high speed infeed.

Condition: good (used), Year of construction: 2000, functionality: fully functional, The frame press is in excellent condition, having been professionally and meticulously maintained. The machine presses precisely at an angle and delivers high pressing force. 3 vertical and 2 horizontal hydraulic cylinders, including press unit for angled components Nljdpfjxgn E Ssx Aa Ejk Pressing force is finely adjustable Press width: 3450 mm, height: 2250 mm Length: 4350 mm, height: 3000 mm, depth: 800 mm Further information available via email or phone. Private sale, therefore no returns, no warranty, and no liability. Sale is made under exclusion of any liability. No shipping.

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: 1683, overall weight: 400 kg, table length: 440 mm, table width: 420 mm, No minimum price – guaranteed sale to the highest bidder! The machine is being auctioned due to the closure of a business. Placing a bid obligates timely collection between 26/01/2026 and 29/01/2026! Nodexqnq Aepfx Aa Eelk TECHNICAL DETAILS Table dimensions: 440 x 420 mm MACHINE DETAILS Dimensions & weight Dimensions (L x W x H): 800 x 600 x 1,900 mm Weight: 400 kg

Condition: ready for operation (used), total height: 2,140 mm, total width: 865 mm, total length: 1,665 mm, passage width: 1,100 mm, power: 2.2 kW (2.99 HP), empty load weight: 970 kg, load capacity: 100,000 kg, Arlo 100 T / 1000 Vario Nlodpfx Aexc Rbbja Eok Max ram adjustment: 380 mm Drawningspeed: 7,54 mm/sec Workingspeed: 2,47 mm/sec Returningspeed: 9,06 mm/sec

Condition: new, A complete working station for the production of timber frame walls including the following functions 1. Framing of the wall 2. Application of cladding Nlodpfxsb Tmrvj Aa Eok 3. Nailing or stapling of cladding 4. Drilling and Routing of openings and overhangs 5. Application of breather paper 6. Nailing of battens 7. Gluing of sheeting material to frames Specification Full PC control with 2 off 19” touch screens Interactive display of framing for panel assembly Automatic download from drawing software Heavy duty tables with one fixed side and one moving side 90 degree squaring corner blocks with pneumatic retraction to enable panel to move to next position when finished 1500mm minimum panel height Maximum panel height 6m Maximum panel length 20m 825mm working height 500mm maximum frame height Motorised table opening with automatic brake locking Independent retractable clamping system, for the complete access of nail guns along top and bottom rails, to enable square and accurate clamping of the panel Framing tools driven to the required position via a servo drive motor, with heights controlled by software Bridge mounted with nailing / stapling tool as standard. Options for other tools to be mounted Full integration with major software packages including Sema, Dietrich;s, HsbSoft, CADWORKS, Gang Nail, DDS, Mitek.& Inventor Batten application system with guide to ensure they battens are kept straight before nailing including batten storage area Selection of multiple nail positions in both automatic and manual modes Pneumatic lifting rollers to assist the manually transporting of the finished panel to next position. Optional stud/sheeting carriage enabling studs to remain adjacent to the operator whilst assembling the frame.

Condition: like new (used), Year of construction: 2016, General Electric ( GE) power plant with TOTAL power - 1.500 MW NEVER USED! NOTE - frequency is 50 Hz 2x 750MW Gas Based CCPP ( 4x gas turbines PLUS 2x steam turbines ) Nlodpfxsx N A Rdo Aa Ejk Please contact us for more details. Thank you!

Condition: used, Hydraulic machine vice, high-pressure clamp ARNOLD / FRESMAK Jaw width: 160 mm Jaw height: 50 mm Clamping force: 5 tons Clamping range: 0 to 305 mm Maximum opening: 308 mm Guideway height: 112 mm - 2 clamping ranges adjustable via locking pin, 0 to 158 and 148 to 308 mm Nedjxp R E Topfx Aa Ejlk - with rotary plate Dimensions (L x W x H): 580 x 325 x 165 mm Own weight: 65 kg Good condition

Year of construction: 2021, condition: excellent (used), Syspal 600HA2 Eurobin wash frame Nlsdonbdtispfx Aa Esk 2021, stainless, SWL 50Kgs, 3Ph

Condition: excellent (used), 1 saw frame in very good condition 710 mm frame width with 8 guide shoes in good condition Nledpfx Aaolni Uqj Eek

Condition: used, Year of construction: 1994, Frame press Schafberger & Sprödhuber Type Super 4 Kw 3 m x 6 m Nledpfx Aasilurno Esk

Condition: new, JLT Clamp Rack Systems For Solid Wood Edge & Face Laminating A rugged and versatile clamping system specifically designed for solid wood edge and face laminating of both hard woods and softwoods. Available in two standard sizes, the Clamp Rack (or Panel Clamp) is ideal for the production of components such as panels, joinery sections, stair components,worktops, block gluings, and table tops etc. Frames can also be clamped. The patented equalizer clamp arms incorporate a number of important features not found on other types of mechanical clamp that help ensure a quality glue joint is produced. They can be positioned anywhere on the frame being easily moved from side to side / row to row. When not in use they can be hung vertically from a top support bar thus saving valuable workshop space. For face laminating material up to 150mm (6") in thickness optional rocker plates can be supplied which easily slide over the top and bottom clamp jaws thus evenly distributing the clamping pressure. When using the 401 type clamp and rocker plates material up to 200mm (8") can be laminated. Standard max. opening of the clamp arm is 1020mm (40") although larger sizes are available on request Nljdpfxjb Evnks Aa Ejk

Condition: excellent (used), Compact Clamp Manufacturer: Röhm Designation: Size 4 Clamping jaws: 160 x 75 mm Clamping range: 160 / 300 mm Opening stroke: 165 mm Base area: 525 x 205 mm Height: 185 mm Weight: 110 kg Nedpfxjxx Rl Ss Aa Eelk

Condition: used, Technical data: 3 sections 6400 mm long Press sections can work together or individually Maximum dimensions of glued element: 4600x1180x200 mm in one section Hydraulic clamps 24 upper/vertical - 8 per section Movable vertical front clamps 24 - 8 per section Power supply: 400 V Motor power: 2.2 kW Overall dimensions: Length: 19 200 mm Width: 1200 mm Njdpsx Id Diefx Aa Ejlk Height: 2300 mm

Condition: excellent (used), functionality: fully functional, 2 pieces of gate uprights, heavy-duty design, for Esterer Gatter HDE or SS 71, with cover. Nlsdpfoxw Uf Tjx Aa Esk

Condition: used, - Dimensions: 381x986x1397 mm - Number of clams: 1 - Smooth surface - Heating plates: 3 zones at the bottom, 2 at the top - Automatic clam lifting - Programmable menus: 32 - Voltage: 380V - Power: 9 kW - Weight: 246 kg - Easy to program and operate - Consistent cooking results Nlsdpfxoxpfvmj Aa Esk - Optimal internal product temperature - Fast and optimized cooking - Easy to clean - Suitable for cooking meat, fish, eggs, chicken and vegetables - Side grease drawers on rails - Program duplication via USB key

Condition: good (used), Year of construction: 2006, A versatile 6 section clamping machine specifically designed for solid wood edge and face laminating. The Clamp Carrier is ideal for producing a variety of components such as panels, table tops, block gluings, joinery sections and stair parts. The patented 'equaliser' clamp arms incorporate a number of important features not found on other types of mechanical clamp that help ensure a quality glue joint is produced. As standard the machine is equipped with a hydraulic clamp tightener / loosener, pneumatic component flattener and hydraulic rotation. Equipped with: 302 type clamp arms with 915mm (36") max opening and 95mm ( 3.5") high jaws - 2 x 80S heavy duty hydraulic drives for rotation - 1 x 80V semi automatic hydraulic clamp tightener. (Hydraulic pack 3 phase electrics). - 1 x 80D pneumatic component flattener Nodoru Evgspfx Aa Ejlk - Pneumatic movement in / out of front rest - CE safety perimeter guards Year - 2006 CE

Condition: excellent (used), functionality: fully functional, Complete saw frame for Esterer Gatter HDE or SS 71. Njdpfx Aasxw Ubno Ejlk