Used Frame Clamp for sale (15,843)

Condition: used, Frame die-cutter - Swivel frame die-cutter - Flatbed die-cutter - Platen die-cutter - Eccentric press Punch + feed for the use of bandknife punching tools Flatbed die cutter HELMERDING type PSH 25 Com. No. EP 97784 Machine. No. 6073 Year of construction 1998 Compressive force 25 ton. Clearance between the tie rods 700 mm Table surface = installation space 800 x 670 mm Table surface = installation frame width 510 x depth 440 mm, plate thickness 20 mm Plunger surface 800 x 670 mm Hole in the table 490 x 420 mm Plunger stroke 45 mm Ram adjustment travel 10 mm Installation height = tool height 100 mm Stroke rate up to 250 strokes/min. Pgodpfx Asdzqmzocvei Motor power 15 kW Mains connection 400 Volt, 50 Hz - Controlled drive for infinitely variable stroke rate - Pneumatic clutch-brake combination - ram compensation cylinder - VOGEL automatic central lubrication system - solid base plate with 4 swinging elements under the machine Space requirement L x W x H approx. 3000 x 2000 x 3000 mm Weight 4.5 tons good condition The machine was formerly used for cutting out cardboard blanks. Ideal for cutting out non-woven fabrics or similar for breathing masks.

Condition: used, Round clamping plate with T-slots Straightening plate and clamping table Diameter Ø 1500 mm Centering bore Ø 80 mm Plate thickness 54 mm Working height 970 mm - 6 T-slots 18 mm - 3 threaded holes M20, pitch circle diameter 1000 mm - Steel base without central bore Weight 785 kg good condition Pgodpfx Acsv Ed Svjvsi

Condition: used, Clamping table, sine table, tilting table Tilting clamping table Table length: 1130 mm Table width: 300 mm Table height: 112 mm Tilting angle: 2° Tilting angle max.: 7° Pgsdpoinldpsfx Acvsi - Tilting angle 2° via leadscrew - Max. tilting angle 7° manually lifted to stop Overall dimensions L x W x H: 1450 x 300 x 112 mm Weight: 275 kg Good condition Clamping plate, ideal for production of wedge strips

Condition: used, Pneumatic press, compressed air press BOSCH type Manufacturer no.: Year of manufacture: 1980 Pressing force: 18 kN = 1.8 t at 5 bar 15 kN = 1.5 t at 4 bar 12 kN = 1.2 t at 3 bar 8 kN = 0.8 t at 2 bar 6 kN = 0.6 t at 1.8 bar Throat depth: 100 mm Ram stroke: 70 mm Table size: 245 x 200 mm Ram face: Ø 45 mm Max. installation height: 235 mm Clamping pin bore: Ø 20 mm with clamping screw Compressed air requirement: 5 bar - Pressing force infinitely adjustable via pressure regulator - Pneumatic cylinder with ram adjustable in height by 90 mm Pgodpoh U Dtuefx Acvoi - Pneumatic dual-hand control - Mounted on a metal frame with wooden boards Required floor space (L x W x H): 1050 x 700 x 1600 mm Weight of pneumatic press: 82 kg Weight including table frame: 140 kg In very good condition

Condition: used, Single column hydraulic press DUNKES type HZT 2,5 Machine No. H94-2558 Year of construction 1994 pressure force 2,5 ton. throat 180 mm table area 420 x 300 mm drop-through opening in table 60 x 185 mm ram surface Ø 40 mm clamping spigot bore Ø 20 mm ram stroke 160 mm Installation height max. 250 mm Rapid traverse downward 65 mm/sec. Rapid traverse upwards 160 mm/sec. Working speed 8,3 mm/sec. Pgodpfx Aoh Uhqyjcvei Table height above floor 950 mm Hydraulic operating pressure 135 bar Tank capacity hydraulics approx. 100 liters Drive power 1,5 kW Mains connection 400 Volt, 50 Hz - Installation height can be increased by shortening the piston rod by 80 mm - Pressure and travel cut-off - 2-hand operation at the machine - stroke counter - safe press control with 2 monitored hydraulic valves - UVV 11.064 VGB 7.n.5.2 (for manual insertion work) - 32047 read off operating hours - Electrical circuit diagram and hydraulic diagram available space requirement L x W x H 1100 x 980 x 1950 mm weight 700 kg very good condition

Condition: used, Single-column hydraulic press HYDRAP type HPSK 25 No. 6312 Year of construction 1989 Pressure force 25 ton. Ram stroke 500 mm throat depth 300 mm Installation height 700 mm Table surface 1000 x 500 mm Table bore Ø 210 mm Plunger surface 400 x 360 mm Clamping pin bore Ø 40 mm Table height above floor 855 mm Feed speed in rapid traverse 280 mm/sec. Pressing speed 3.5 mm/sec. to 25 mm/sec. Return speed 280 mm/sec. Hydraulic tank capacity 240 liters Drive power 7.5 kW Mains connection 400 Volt, 50 Hz. - Operation and programming via SIEMENS S5 with OP1 control system - Measuring system for stroke adjustment - Pressing speed infinitely variable via potentiometer - Pressure setting infinitely adjustable manually via pressure regulator - Short stroke device - Mechanical tool clamping on ram with T-slots and clamping pin hole Pgsdpfxjhrakvs Acvji - Switch cabinet with electrical control on the machine - Two-hand operation and electrical connection for foot control - Control provided for electrical mold monitoring - Hydraulic diagram and electrical diagram available Space requirement L x W x H 1800 x 1200 x 2930 mm Weight approx. 4 tons good condition

Condition: used, Table unit from a DROOP & REIN portal milling machine Clamping plate with T-slots made of cast steel gray cast iron Table unit with clamping plate and very solid guideway Table clamping surface 5500 x 2000 mm Travel of the table clamping plate approx. 3100 mm Table height 1050 mm Table load: max. 20 tons Ball screw: Ø 100 mm Thread pitch: 20 mm (single-start) Pedjthuzpopfx Acvegi - Processing table guided very stably on the bed - Metal telescopic guideway cover - comes from a DROOP & REIN portal milling machine - Longitudinal table movement via ball screw and SIEMENS servo motor - Clamping surface with 11 T-slots 28 mm - Drive via SIEMENS 1FT6134-6AB71-1AG2 servo motor with IC200448S/R encoder (RN 000 B25) Total length 9500 mm Width 2000 mm Overall height 1050 mm dead weight 28 ton. good condition

Condition: used, Single-column toggle press MAY - MAYPRES - KOMATSU Type MKN 1-63/6 Psdpsv Uraajfx Acvsgi Eccentric toggle press, eccentric press Year of manufacture approx. 1984 Pressing force 60 tons Thrust 160 mm Table size 580 x 360 mm Ram surface Ø 270 mm Clamping pin bore Ø 40 mm Distance between columns 218 mm Ram stroke 60 mm Ejector stroke 15 mm Ram adjustment travel 30 mm Max. installation height 300 mm (with intermediate table plate) Stroke rate 70 strokes per minute Motor speed 1400 rpm Motor power 3 kW Power supply 380 V, 50 Hz - Pneumatic clutch and mechanical brake with pneumatic release (separate clutch-brake combination) - Table intermediate plate L x W x H 580 x 360 x 58 mm, with holes and cutouts - Mechanical ejector, ejector device in the machine table, Ø 80 mm - Electric two-hand control and foot switch - Movable safety screen, UNIDOR protective housing with pneumatic front screen - BALLUFF cam switch Space requirement L x W x H 1400 x 1200 x 1850 mm Weight 3 tons Good condition

Condition: used, Battery changing rack, transport rack, storage rack for forklift batteries Changing table, battery pallet, battery changing system, battery changing trolley Manufacturer: WELUX 2.5 Podpfefgpfpex Acvogi Type: WS2-RR-2-300 Load capacity: 2x 500 kg per compartment = 1000 kg Compartment dimensions W x D = 300 x 920 mm Compartment dimensions without centre bar W x D = 655 x 920 mm Adjustable height: 80 to 200 mm - Centre bar removable - Also suitable for sheet material - 16 pieces of galvanized steel rollers Ø 50 mm - 4 castors Ø 100 mm, 2 of which are swivel with brake - Each castor individually height-adjustable via threaded rods Overall dimensions L x W x H: 1050 x 950 x 615 mm Net weight: 85 kg Good condition

Condition: used, Clamping plate with T-slots made of cast steel/grey cast iron Base plate for radial drilling machine Assembly table, assembly station, base plate for column slewing crane Podpfx Acjh R D Uzovogi Length 1850 mm Width 915 mm Plate thickness 230 mm Table surface with T-slots 1030 x 750 mm - Clamping surface with T-slots 22 mm, spacing = 250 mm - Top side milled parallel to the underside = clamping surface - Underside also milled, ribs rest flat and support - Ideal as a base plate Net weight 1140 kg good condition

Condition: used, Handling device, handling system JÄGER HANDLING Manipulator for screwdriving technology Type: Handy-flex 300 Horizontal movement: 490 mm Vertical movement: 400 mm Load capacity: max. 14 kg Handyflex projection: 275 to 765 mm Projection from frame: 725 mm Rotation radius at full projection: approx. 135° Height of mounting plate above floor 1250 to 1650 Pgodpfegbpuhox Acvei Vertical guide pillar: Ø 30 mm Horizontal guide pillars: Ø 20 mm Mounting plate for tool holder: 305 x 90 - Can be moved in three axes (horizontal, vertical, rotatable) - Rotary encoder BAUMER type GI355.022C315 for rotary and horizontal movement - Balancer for vertical movement - Adjustable load capacity - for weightless suspension of small appliances - Ball bearing guide in all axes - mounted in a frame made of BOSCH system aluminum profile, cross-sections 45x45 / 90x45 / 180x45 / 90x90 mm - Height-adjustable feet Space requirement L x W x H: 1450 x 1250 x 2480 mm dead weight: 180 kg good condition

Condition: used, Clamping plate, machine table with metal base Clamping table, assembly table, clamping angle plate Pjdpowkvi Nsfx Acvjgi Clamping surface: 1200 x 370 mm T-slot spacing: 90 mm Table height: 870 mm - The T-slot table was originally a machine table from a milling machine - 4 T-slots, 16 mm - Metal base with height-adjustable feet - Multilayer wood plate L x W x H 1200 x 400 x 18 mm Overall dimensions L x W x H 1400 x 770 x 870 mm Weight: 250 kg good condition

Condition: used, Back grinding device with permanent magnetic chuck JUNG type HA 20 Device No.: 3344 Profile depth: max. 15 mm Angle adjustment: 0° to 2° Magnetic plate: 115 x 115 mm Pedpfjdz Sqxox Acvjgi Clamping range: 110 x 75 mm Magnetic plate height: 119 mm Workpiece dimensions L x W x H: max. 60 x 100 x 50 mm Power input: 1 ampere Operating voltage: 24 volts DC (V/DC) - Mechanically switchable permanent magnet Dimensions L x W x H: 500 x 200 x 125 mm Weight: 25 kg Good condition Suitable for tool & die making for tapered, back-ground cutting plates or mold inserts.

Condition: not inspected (used), Year of construction: 2018, functionality: unexamined, machine/vehicle number: 0129053.001, overall weight: 200 kg, plate height: 100 mm, plate length: 430 mm, plate width: 330 mm, No minimum price – guaranteed sale to the highest bidder! Placing a bid obligates timely collection either between 11.05.2026 and 13.05.2026 or between 18.05.2026 and 21.05.2026! TECHNICAL DETAILS Plate dimensions: 430 x 330 x 100 mm MACHINE DETAILS Operating voltage: 400 V Dimensions & Weight Dimensions (L x W x H): 520 x 300 x 380 mm Weight: 200 kg Psdsym T D Ispfx Acvegi EQUIPMENT Electric control External reference: Lot 237/ Lotec

Condition: not inspected (used), functionality: unexamined, No reserve price – guaranteed sale to the highest bidder! Placing a bid obliges you to collect on time, either between 11.05.2026 and 13.05.2026 or between 18.05.2026 and 21.05.2026! Auction of chuck jaws in various designs! The chuck jaws are in good condition! MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 1,200 x 800 x 200 mm Weight: 600 kg Pedpfxsym Tc Do Acvogi External reference: Lot 8 / Moog Rekofa

Condition: not inspected (used), functionality: unexamined, No minimum price – guaranteed sale to the highest bidder! Pgsdpfx Ajym Sn Socvoi Placing a bid obligates you to collect on time, either between 11.05.2026 and 13.05.2026 or between 18.05.2026 and 21.05.2026! Auction of 8 collets including pneumatic clamping system! TECHNICAL DETAILS Diameter: 140 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 800 x 600 x 200 mm Weight: 50 kg External reference: Pieper - Lot 171

Condition: not inspected (used), functionality: unexamined, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect on time, either between 11.05.2026 and 13.05.2026 or between 18.05.2026 and 21.05.2026! Auction of approx. 26 collets including clamping system! TECHNICAL DETAILS Diameter: 80 mm MACHINE DETAILS Dimensions & Weight Podpfx Aoym Slkocvogi Dimensions (L x W x H): 800 x 600 x 100 mm Weight: 50 kg External reference: Pieper – Lot 119

Condition: new, table length 900 mm table width 600 mm table height 700 mm weight of the machine ca. 90 Kg dimensions 0,9 x 0,6 x 0,7 m Pedpfjupxmfex Acvogi

Condition: good (used), Electro-hydraulic frame press Manufacturer: Hess Model: Hydro Nummer 1 Podeyux Uuspfx Acvsgi 1.1 kW Press dimensions: max. 3550 x 2550 mm The machine is in good condition.

Condition: used, Description For sale is a set of SCHUNK pneumatic 2-jaw power clamping blocks (centrically clamping) including manual/control valve (as shown) and an extensive set of top/clamping jaws (various designs, incl. prism/V-jaws). Ideal for fixture construction, series production, and flexible setups. 2 units available Price quoted: net/unit Pgodjyp Iflspfx Acvei Collection in 57439 Attendorn. Shipping possible.

Condition: good (used), Clamping plate, welding table, welding table, straightening plate -Mounting plate: steel , with a vice -Width: 1500 mm Pjdpoft Tciefx Acvegi -Length: 2005 mm -Height: 845 mm -Plate thickness: 45 mm -Plate: is on steel frame -Vise: clamping jaws 110 x 15 mm -Transport dimensions: 1525/2230/H990 mm -Weight: 1250 kg

Condition: good (used), Year of construction: 1994, Window processing line, CNC window manufacturing plant, window angle machine, clamping device, pneumatic clamp -Manufacturer: Gubisch, clamping device from window manufacturing plant type DST H -Stroke: 120 mm -Clamping cylinder: airtec HM-25-120 -Number: 2x clamping device available Psdpfjyibx Aex Acvegi -Price: per piece -Dimensions: 560/225/H80 mm -Weight: 5 kg/pc.

Condition: good (used), Year of construction: 1994, Window processing line, CNC window manufacturing plant, window angle system, clamping device -Manufacturer: Gubisch, clamping device from window manufacturing plant type DST H -Stroke: 180 mm Pgsdpfxsyibvhe Acvji -Geared motor: SSB type SSB DS-SgFFH008 0.25 kW / 405/57 rpm -Encoder: ferrocontrol SAE-1020 H -Number: 2x clamping device available -Price: per piece -Dimensions: 850/450/H240 mm -Weight: 42 kg/pc.

Condition: like new (used), functionality: fully functional, Ferwood Code: RS0003584 - Manufacturer Code: LCP2505AK-08 - Condition: As new (display item) - Functionality: Fully functional - Compatible Machine: - If interested, we offer overhaul service, please contact us. 1KG 20X20X20 Pedpfxsyrn Sqe Acvsgi

Condition: excellent (used), Suspension clamp, helmet rail holder, helmet rail, running rail, rail holder -Manufacturer: Helm, suspension clamp, rail holder, galvanized yellow -Type: 1508 Pedpfx Acev R Td Sjvogi -Dimensions: see photos -Quantity: 30x suspension clamps available -Price: per piece / Minimum order 2 pieces -Dimensions: 90/70/H120 mm -Weight: 1.2 kg/pc.